Used Laser Co 2 for sale (90,565)

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Iajdpfxjw Ivrks Ag Uju Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete Iodpfx Agslxyhfo Ueau essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2025, Pressure blasting cabin DSK 20.10.09 with carriage and turntable. width: 2050mm depth: 935mm height: 955mm Iodpfxsfnh Rvo Ag Uoau Pneumatic lifting door with the advantage that the abrasive falls into the cabin when opening the door and not on the floor. If you have any questions about technical specifications etc. please contact us in writing or by telephone. The basis of the machines is the production at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with the well-known contacts of many years.

Condition: like new (used), Year of construction: 2018, Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA HP20RD.(Payload: 20kg, H-Reach: 2017mm, Robot Mass: 293kg, 2010.04) 1 x YASKAWA DX100 controller.(2010.05). 1 x IPG YLS-4000.(2017). 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD(S.N.:BIMO2W17013). Ijdpeh Ad E Uefx Ag Uoau Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: new, Year of construction: 2023, Laser source: Raycus 3 to 6kW Laser head: Raytools autofocus Structure: 2 horizontal chucks Loading: 6.5m unloading 2.5m Software: CAD CAM Tubest, Tube pro (Windows 10) Tube diameter: 15-230mm Tube profiles: round, rectangular, square Options: - 3 D swivel head - Automatic bundle loader - Table loader - Conveyor unloader - Weld seam detection - Raybox - Extraction system Iedpfx Agsnkailj Ueau

Condition: new, Year of construction: 2025, Technical Parameters Model: RST-FLC-2000W/3000W Laser: Raycus fiber laser Laser power: 2000W / 3000W Laser wavelength: 1064nm Frequency: 10–50 kHz Cooling method: Water cooling Cooling water: Deionized water Water temperature: 23–26°C Net weight: 160kg (2000W) / 200kg (3000W) Dimensions: 98 × 122 × 143 cm Total power: 2000W / 3000W Scan width: 10–80 mm Iodpfx Aswznqgeg Uoau Mode of operation: Handheld or automatic Operating temperature: 0–40°C Price Fiber Laser Cleaning Machine RST-FLC-2000W/3000W Connection: 230V / 380–400V – 3PH 50Hz RAYCUS 2000W (230V)……….€12,500 RAYCUS 3000W (380V)……….€15,500

Condition: new, Year of construction: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Effective working area: 1520x3050 mm Max. Positioning speed: 120 m/min Max. Acceleration: 1,5 m/s² Positioning accuracy: 0,02 mm/m Iodpfx Agji Ar Ruo Ueau Repeatability: 0.03 mm/m Max. Table load: 1500 kg

Condition: excellent (used), Year of construction: 2021, laser power: 20 W, Computer and software in German language, autofocus, fiber laser source : high, power itterbium, working range 160mm x 160mm, laser wavelength : 1064 nm, Z-axis motorized adjustable, cooling: air Iasdpeuaug Ijfx Ag Ueu

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 18089754, laser type: fiber laser, Description: High-performance fiber laser from IPG Laser GmbH, manufactured in Germany. The laser is designed for industrial applications such as cutting, welding, or surface processing and is distinguished by high efficiency, stable beam quality, and robust construction. Iedpfxjxv Dp Sj Ag Uoau Technical data: Manufacturer: IPG Laser GmbH, Burbach, Germany Model: YLS-4000-S2T Serial number: 18089754 Year of manufacture: September 2018 Rated voltage: 400–460 V AC, 3 phases + PE Frequency: 50 / 60 Hz Full load current: 29.3 A Circuit protection: 32 A / 120 kA CE marking: present

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller model: HypCut, laser type: fiber laser, laser source manufacturer: MaxPhotonic, laser power: 20,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 80 mm, sheet thickness stainless steel (max.): 100 mm, sheet thickness aluminum (max.): 60 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 12 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, input current: 110 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 20 bar, overall weight: 9,500 kg, warranty duration: 12 months, door opening width: 1,000 mm, door opening height: 2,000 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, New Laser Cutting Machine with 20 kW Fiber Laser Iasdpfoyhhnkox Ag Ueu Our goal is to offer highly precise, long-term stable, and yet cost-effective laser machines. Our machines are ideal for workshops and repair businesses. The delivery includes a perfectly developed cutting parameter library as well as first-class service. Please also check out our attractive leasing/leasing-purchase offers. - Machine with automatic nozzle changer (optional) and automatic nozzle centering (optional) - Machine with automatic shuttle table - Machine bed lined with graphite plates - Machine measured and calibrated with Renishaw system (including measurement protocol) - Space-saving design - Extremely energy-efficient cutting system - Requires only approx. 9.5 x 3.5 meters of installation space - 20 kW MaxPhotonics laser source (G5 / German specification) The following options are also available: - Automatic nozzle changer (optional) - Automatic nozzle centering (optional) - Vision control (placement and nesting via camera system) - Top quality – schedule a viewing today! Cutting capacities: - Steel sheet up to 80 mm - Stainless steel sheet up to 100 mm - Aluminum sheet up to 60 mm - Travel: 1500 x 3000 mm - Machine control in German language - Safety light curtains for maximum operator protection - Extensive collision protection measures for the cutting head - Large laser safety windows on three sides for optimal monitoring of the cutting process - Automatic, programmable 3-gas switching (compressed air, nitrogen, oxygen) - Comprehensive cutting parameter database - Incl. nesting module - Very user-friendly operation - High-performance laser chiller - Machine control in German - Comprehensive service and warranty package - High-performance laser chiller - Optional filter extraction system Sale exclusively to commercial customers. Delivery / consultation / sales only within Germany / Austria / Switzerland Machine dimensions approx.: Length: 8.5 m Height: 2.3 m Width: 3.5 m Total weight: approx. 9500 kg Need a different laser power, table shape, or table size? No problem. I am happy to prepare a suitable offer. E.g. 2 kW machine from €29,990 or 6 kW machine from €79,900 Not sure which laser power is right for your application? Just give us a call! Of course, I can perform cutting trials according to your requirements – many solutions are possible.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 3,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, table width: 1,300 mm, travel distance X-axis: 2,550 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 3,500 kg, door opening width: 2,600 mm, door opening height: 1,000 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, new laser cutting machine with 3kW fiber laser Our goal is to offer high-precision, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair businesses. A perfectly developed cutting parameter library is included, as is first-class service. Please also take note of our attractive leasing and hire-purchase offers. - Machine without automatic shuttle table - Very space-saving design - Extremely energy-efficient cutting system - Only about 4 x 4 meters installation area required - 3kW laser source from MaxPhotonics (G5/German configuration) – suitable for aluminum - Top quality, schedule a viewing now! Cutting capacities: - Mild steel up to 22mm - Stainless steel up to 12mm - Aluminum up to 12mm - Brass up to 5mm - Travel range: 1260 x 2550mm (suitable for medium-size sheets) - Machine control interface in German - Safety light curtain for maximum operator protection - Extensive collision protection for the cutting head - Large laser protection window for process observation - 3-gas selection (compressed air, nitrogen, oxygen) - Extensive cutting parameters library - Including nesting module - Very easy to operate - Powerful laser chiller - German service and spare parts availability - Extraction/filter system optionally available (5.5kW with frequency converter for exceptionally quiet operation) Leasing and hire-purchase available via our financing partner Sale exclusively to commercial customers. Delivery / consulting / sales only in Germany / Austria / Switzerland. Machine dimensions approx.: Length: 4.0m Height: 2.3m Width: 4.0m Iaedpfoxa Ahnjx Ag Uju Total weight: approx. 3500kg Need different laser power, table configuration, or table size? No problem. I am happy to prepare a tailored offer. Example: 2kW machine from €29,990 Not sure which laser power is right for your application? Of course, I can perform cutting trials according to your requirements. There is a wide range of possibilities.

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Fiber laser welding machine with 2000-watt laser power 4-in-1 device Welding with automatic wire feed Welding without wire Cleaning Cutting - Top device at a top price from our showroom - approx. 10 operating hours - 2kW laser source by MaxPhotonik - German-language menu navigation - Universal device for welding / cutting / cleaning - incl. 4-roller welding wire feeder - integrated water cooling - immediately available Also take advantage of our attractive leasing/financing offers. Approx. machine dimensions: Width: 60cm Height: 120cm Depth: 110cm Weight: approx. 150kg Ijdpfx Ageug Unfj Usau

Condition: new, Year of construction: 2025, Pulsed laser cleaning device with 200-watt laser power significantly more effective for cleaning and rust removal applications than continuous lasers such as those used in welding lasers. - View and test with us now - Top-quality device at a top price, available from our showroom - For paint removal, rust removal, stainless steel weld seam cleaning, etc. - 200-watt pulsed laser / air-cooled - German menu navigation - Immediately available Also check out our attractive leasing and hire purchase offers. Sale only to commercial customers Machine dimensions approx.: Width: 60 cm Height: 120 cm Depth: 110 cm Ijdpfx Ageuhcd Ro Ueau Weight: approx. 100 kg

Condition: new, FSCUT Ethercat CNC Control System DELTA Ethercat Servo Driver & Motor System Hiwin Guide Liner SMG / KH Rack Raytools / BLT Series Cutting Head Iodpjnr Hcwefx Ag Usau Laser source 6kW HanLi Chiller Gross weight around 9.5ton Optional: bevel cutting for sheet

Condition: new, Year of construction: 2024, 5 Axes FSCUT 3000S CNC Control System DELTA Servo Driver & Motor System Hiwin Guide Liner SMG / KH Rack Raytools / BLT Series Cutting Head HanLi Chiller SMC Proportional Valve. Dairuike Auto Pneumatic Clamp φ220mm Various Diameter Wheels Pneumatic Support Loading Assist System Iajdpfxjnr Hgho Ag Uju Gross weight around 5.5ton

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser power: 12,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 35 mm, sheet thickness aluminum (max.): 25 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 5,500 kg, door opening width: 3,000 mm, door opening height: 1,000 mm, Equipment: cabin, documentation/manual, New laser cutting machine with 12 kW fiber laser Our goal is to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair businesses. A meticulously developed cutting parameter library is included, as well as first-class service. Please also consider our attractive leasing/financing options. - Machine with automatic shuttle table - Machine bed lined with graphite plates - Machine measured and aligned using the Renishaw system (including inspection protocol) - Very space-saving design - Extremely energy-efficient cutting system - Only approx. 8.5 x 3.5 meters footprint - 12 kW laser source from MaxPhotonics (G5/German version) - Top quality, schedule your inspection now! Cutting capabilities: - Steel sheets up to 35 mm - Stainless steel sheets up to 20 mm - Aluminum sheets up to 20 mm - Travel range: 1500 x 3000 mm - CNC control system in German - Safety light curtain for maximum operator protection - Extensive collision protection features for the cutting head - Large laser safety windows on three sides for monitoring the cutting process - Automatic, programmable 3-gas switching system (compressed air, nitrogen, oxygen) - Comprehensive cutting parameter file - Includes nesting module - Very user-friendly - High-performance laser chiller - CNC control system in German - Extensive service and warranty packages - Powerful laser chiller - Filter extraction system optional Sale is strictly to commercial customers only. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Length: 8.5 m Height: 2.3 m Width: 3.5 m Total weight: approx. 5500 kg Iasdexg Dn Ajpfx Ag Uju Need a different laser power, table type, or table size? No problem. I will gladly provide a tailored offer. For example: 2 kW machine from €29,990 or 6 kW machine from €79,900 Not sure which laser power is right for your application? Just call us! Of course, I will carry out cutting trials per your requirements. There are many possibilities here.

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 Ijdpfow E H E Rsx Ag Ujau - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 106546-11, total height: 3,550 mm, total length: 7,185 mm, total width: 4,720 mm, overall weight: 8,000 kg, The drilling method used by the deep hole drilling machine is single-lip gun drilling. Drilling Unit Information: - Number of spindles: 1 - Spindle speed, infinitely variable: 500 - 8,000 rpm - Spindle drive power: 11 kW at 60% duty cycle - Max. drilling depth: 1,000 mm (in one pass, no retraction required) - Drilling diameter: 3 - 35 mm (based on ST 60) - Drilling diameter / indexable inserts: 40 mm - Max. thread cutting: M27 - Milling material removal rate: 250 ccm/min Travel Paths: - X-axis travel: 1,050 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - W-axis travel: 1,250 mm (with 2 steadies) Traverse Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid System Information: - Coolant supply: deep drilling oil - Tank capacity: 1,200 liters - 1 x scraper-belt chip conveyor - 1 x screw conveyor system - 1 x hydraulic unit and pneumatic unit/equipment - 1 x central lubrication system - 1 x submersible pump: Pump delivery: 200 l/min - 1 x low-pressure pump: Pump delivery: 100 l/min Drive power: 2.2 kW - 1 x compact band filter: Filtration rate: 175 l/min For machining steel and non-ferrous metals - 1 x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1 x air cooler (heat exchanger): 22.5 kW - 1 x oil mist extraction unit: Extraction capacity: 1,250 m³/h Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with tool holder SK 40 Tool Changer Magazine comprising: - Tool magazine with intermediate gripper - Tool holder SK 40 - Max. permitted tool diameter: 80 mm - Max. permitted tool length: 250 mm - Number of tool storage positions: 80 - 2 x swiveling tool steady rests for guiding and supporting long drilling tools, with automatic positioning to home position. Clamping Table with B-Axis and NC Rotary Table: Ijdpfxoxdm Awo Ag Ueau - Length / width: 800 x 600 mm - B-axis: 360° - Positioning accuracy, B-axis: +/- 30 seconds - Table travel: 800 mm - Payload (centered): 1,500 daN Electrical Equipment Information: - 1 x CNC control system, Heidenhain iTNC 530 - 1 x drilling process monitoring - 1 x RENISHAW touch probe Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 26 kW

Condition: new, Year of construction: 2025, If you are looking for the right machine and not a toy, then you have come to the right place: Foil label - label printer - name plate machine Laser markers skyLASER Mark 500 - 2D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications (* Prices depending on the equipment, this is a brand new laser machine from our production) Our skyLaser Mark systems are used exactly where the conventional CO2 laser technology has its limits. Using the fiber laser with a wavelength of 1064nm, even the most filigree structures can be realized in almost any material. In contrast to conventional milling processes, the laser works without contact, without force and without tool wear. The advantages in your application are the geometric flexibility and high machining accuracy. This type of machining can be used regardless of the hardness of the workpiece to be machined. The flexibility of the system increases with the mobile work table, which can be adapted to your needs. You can easily integrate the system into your production line, or operate it as a stand-alone solution. Our skyLaser Marks deliver very precise and permanent markings (laser engravings) and are suitable for the special area of ​​laser metal and certain organic substances. The use of a variety of fonts, the application of barcodes, serial numbers, logos and pictures is easily possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of embossing stamps, engravings, inscriptions and complex, fine structures, the software is extremely user-friendly. Even very complex and complex marking tasks can be easily created on the supplied industrial PC. Precise positioning is done in no time at all, thanks to the optional observation camera for process tracking and software-based workpiece alignment. Since the system has hardly any wearing parts and is almost maintenance-free thanks to the IPG laser technology, it can be used especially for industrial applications as well as in continuous use. The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or 300x300 mm (F-theta lenses dependent / 3D option) Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Nominal laser power: 20W New: software-controlled, variably adjustable working width (X, axis max. 450mm depending on structure) New: software-controlled, variably adjustable working height (Z, axis max. 200/450 mm depending on the body) Optional other work areas - automatic material feed, etc. Air cooling due to low energy consumption Labeling speed: up to 8000 mm / s (SCANLAB dyn AXIS ® galvanometer scanners the SCAN cube ® 10 achieve labeling speeds of up to 640 characters per second.) Redundant security system Laser class: 1 or, depending on the configuration, laser class: 2 (through optional pilot laser) Iajdecuiz Tspfx Ag Uou pfeifer-technology HQ mirrors and optics for perfect results, powerd by Scanlab (R) pfeifer-technology industrial PC including pre-installed control software New: incl. Laser Focus Finder New: incl. Process air control New: including suction control Optional: positioning laser: integrated diode laser for optimal positioning New including F-Theta lens 110 x 110 mm working area with protective glass! (Extension of the work area optionally to (180, 350 mm) almost maintenance-free

Condition: new, Year of construction: 2025, machine/vehicle number: AB2024, (Laser marking / Laser engravings) and metal and organic materials suitable for special laser applications. The use of a variety of fonts, barcode application, serial numbers, logos and images is effortless. Thanks to the excellent resolution almost all requirements can be met at marking tasks. The software is extremely user-friendly. Even very complex and complicated marking tasks can be easily supplied to the industrial PC to easily create. The exact positioning is done in no time, thanks to the integrated positioning laser. Iaedpfx Age Sd Tro Uou Since the system has little wear and thanks to the fiber laser technology company (IPG Photonics / IPG Laser GmbH) is virtually maintenance-free, it can be used particularly in industrial applications and in continuous use. - Bearbeitungsflaeche: 110x110 or other zBsp. 175x175 mm (F-Theta lenses dependent) Optional - Laser source: IPG Laser alternatively other depending on the application - Laser Power: 20W / 30W Optional / 50W - Software-controlled precision axes worktable (X, Y, Z axis) - Traversing in Z max. 200mm - Marking speed: up to 8000 mm / s - Redundant safety system - Conditioning Laser Class: 1 - Scanlab SCANcube for perfect results - PFEIFER technology Industrial PC incl preinstalled control software. - Positioning laser: integrated diode laser for optimal positioning - Optional: camera positioning, 3D processing, database connectivity - Virtually maintenance-free

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 1,500 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 4 mm, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 2,800 kg, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Laser Cutting Machine with 3kW Fiber Laser Our mission is to offer highly precise, long-term stable, yet cost-effective laser machines. Our machines are ideal for workshops and repair operations. Included in delivery are a perfectly developed cutting parameter library as well as first-class service support. Please also consider our attractive leasing and hire-purchase offers. The ultra-affordable entry into laser cutting technology - High-quality MaxPhotonics laser source - Extremely energy-efficient cutting system - Requires only approx. 3.0 x 3.0 meters of installation space - Top quality, schedule a viewing now! Cutting capabilities: - Steel sheet up to 22mm - Stainless steel sheet up to 12mm - Aluminum sheet up to 8mm - Travel range approx. 1300 x 1300mm - Table size: approx. 1300 x 2500mm (i.e. a full medium-format sheet fits in the machine) - Machine control in German - Manual front door - Comprehensive collision protection measures - Large front window for monitoring the cutting process - Automatic, programmable 2-gas switching (compressed air/nitrogen, oxygen) - Extensive cutting parameter file - Incl. nesting module - Very easy to operate - Powerful laser chiller Sales to commercial customers only. Delivery, consulting, and sales exclusively in Germany/Austria/Switzerland. Machine dimensions approx.: - Width: 3.2m - Height: 2.3m - Length: 3.3m - Total weight: approx. 3000kg Leasing or hire-purchase possible through our financing partner. Need a different laser power, table configuration, or table size? No problem. I am happy to provide a customized offer. Iajdpjyacw Refx Ag Usu Not sure what laser power is suitable for your application? Of course, I will conduct cutting trials according to your requirements. Almost anything is possible – from 0.5 kW to 20kW laser power.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser hours: 10 h, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 5 mm, table length: 2,070 mm, table width: 1,070 mm, working length: 2,000 mm, working width: 1,000 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 100 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Offered here is a high-precision laser cutting machine with 3000-watt laser power Model: LG-1020/3kW HaiCut Premium Line - Fully equipped - Innovative 3-gas switching system (pressure and gas type controllable via software) Cutting with N2, O2, mixed gas (compressed air) - Automatic front door - Machine bed lined with refractory bricks (chamotte) - Machine bed and axes measured and calibrated with Renishaw interferometer Our goal is to offer the best, most stable, and cost-effective laser machines currently available on the market. Our machines are ideal for workshops and repair businesses. A perfectly developed cutting parameter library is included, as well as premium on-site support. Please also take note of our attractive leasing/financing offers. New machine, delivery time approx. 6-8 weeks We are happy to demonstrate the machine at our facility. Travel range: approx. 1000 x 2000 mm Iaodpfxsyacwkj Ag Usu Table size: approx. 2070 x 1070 mm (i.e. the machine accommodates a small-format sheet) Sliding cutting table For high-precision metal cutting Fully installed and calibrated Cutting software in German incl. nesting module Very easy to operate Switch on and start working Laser source from Max Photonics (G5/German version) with 3000 watts output Comprehensive electronic and mechanical collision protection systems for the cutting head Large laser protection window in the front door Automatic front door Safety light curtain for maximum operator protection Cuts stainless steel up to 12 mm Cuts steel up to 22 mm Cuts aluminum up to 12 mm Cuts brass up to 5 mm Heavy industrial quality Complete system / ready for immediate operation LED work area lighting 200mm duct connection for fume extraction incl. extraction fan Leasing or financing available through our financing partner Require different power or table size? No problem, we have several machines in stock or available at short notice. Sales exclusively to commercial customers. Delivery/advice/sales only in Germany/Austria/Switzerland Machine dimensions approx.: Width: 3.6m, Height: 2.1m, Depth: 3.3m Weight: approx. 2.5 tons

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, load capacity: 4,000 kg, lifting height: 10,000 mm, battery voltage: 48 V, empty load weight: 9,000 kg, General information: The HUBTEX 2125-PU/SO with model MQ 40 is an electric multidirectional sideloader with a load capacity of 4 tons and a cross-seat cabin. This forklift is suitable for warehouse areas where maximum flexibility and maneuverability in narrow aisles are required to handle loads of up to 4000 kg. M = Multidirectional steering Q = Cross-seat cabin 40 = 4,000kg 2125 = Series PU = Vulkollan tires SO = fork tilting and lowering, extendable forks to 1500mm, hydraulic fork width adjustment Iaodpfx Agsx Aqaqj Usu Additional equipment/modifications: - Camera system on the right and left of the forks, with monitor in the cabin - Positioning lasers on the right and left of the forks - Soft-stop feature when lowering the forks and when crossing the telescopic fork extension steps

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 30214501, turning length: 2,000 mm, total length: 12,000 mm, WFL Millturn M60/2000 WORKING RANGE center distance mm 2000 swing over bed, turning diameter mm 690 MAIN DRIVE AC-drive with 2 gear steps drive power 100% duty cycle kW 40 max. speed min-1 3300 max. torque at the spindle 100% duty cycle Nm 1830 TAILSTOCK quill diameter mm 140 quill travel mm 160 quill force (adjustable) N 3500-31000 quill with installed live center MK 5 Iodpfx Aeu Hl R Tjg Ueau TOOL HOLDER (single tool holder, turning-boring-milling unit) AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 spindle diameter in front bearing mm 100 DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3

Condition: repair required (used), Year of construction: 2008, Manufacturer: BECS Master Chiyoda Kogyo Co Tip: HWP 501 Year of manufacture: 2007 Iodpfxorigaio Ag Ujau Max. Tube size 19 mm (1.5 mm wall thickness) The device is currently not working. PLC error