Used Lathe Shaft for sale (11,321)

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, turning diameter: 630 mm, - Complete overhaul of the machine (description of work see below) - New electrical installation in CE-compliant version: chuck guard Ø 315 mm with limit switch, front chip guard on the carriage, rear movable guard, leadscrew cover - Accuracy certificate - Electrical installation inspection protocol - Delivery: immediately Key Features: - Simple and ergonomic operation - Hand scraping of critical machine parts – high machining precision - Long service life - Low operating costs - Low maintenance requirements - Capability for cutting various thread types with wide pitch range Technical Specifications: Working Area: Swing over bed: 630 mm Swing over carriage: 340 mm Swing in gap: 880 mm Effective gap length from spindle face: 300 mm Distance between centers: 2000 mm Center height above bed: 315 mm Bed width: 450 mm Spindle: Speed range: 10–1000 rpm Number of speed steps: 16 Spindle nose: Bayonet B8 Spindle bore: 71 mm Internal taper: Metric 80 Slides: Cross slide travel: 400 mm Compound slide travel: 180 mm Max. tool size: 40 x 25 mm Longitudinal feed range: 0.05 – 6.4 mm/rev Cross feed range: 0.025 – 3.2 mm/rev Rapid longitudinal feed: 3000 mm/min Rapid cross feed: 1500 mm/min Compound rest swiveling angle: ±90° Tailstock: Quill diameter: 90 mm Quill stroke: 240 mm Quill taper: Morse 5 Transverse offset: ±10 mm Thread Cutting: Metric threads (number/pitch): 29 / 0.5 – 40 mm Whitworth threads (number/pitch): 35 / 1–80 TPI Modular threads (number/pitch): 26 / 0.25–20 mm Diametral pitch threads (number/DP): 31 / 2–72 DP Drives: Total power input: 15 kVA Main drive motor: 11 kW Coolant pump: 0.1 kW Rapid traverse motor: 0.95 kW Dimensions: Total length: 4000 mm Width: 1440 mm Djdpfx Abeyf Dnusujcc Height: 1100 mm Weight: 2940 kg Operating Data: Supply voltage: 3 x 400 V ±10% Frequency: 50 Hz ±2% Achievable machining accuracy: IT7 Spindle nose: Bayonet B8 Spindle bore: Ø 71 mm Square turret Electrical system for 3 x 400 V / 50 Hz, circuit breaker equipped Slide box controls on right side Gap for increasing swing over bed to 880 mm for 300 mm from spindle face Rapid traverse Tailstock Main drive 7.5 kW Swarf tray + coolant system LED machine lighting Supply line in armored hose Folding handle for X axis Folding handle for Z axis Color – RAL 7035-3 / 7016-3 / 6153 Set of change gears for thread cutting Shear pin, 3 pcs

Condition: new, Clutches and brakes for Russian machine tools We offer for sale original electromagnetic and mechanical clutches, brakes and complete clutch assemblies for Russian machine tools such as: 1M63, 1M65, 1H65, 165, 1512, 1516, 1525, 1L532, RT-117, DIP-300 and many others. Djdpfx Abjv Sb Eysuecc Our warehouse also offers spare parts such as: - electromagnetic clutches and brakes, clutch plates and brush holders; - complete electromagnetic and mechanical clutches for 1M63, 16K20, clutch shafts, friction plates and discs; - parts, clutches and brakes for 6P82T, 6P83 milling machines, etc. - pneumatic clutches for KD2128, KD2328 series presses, etc., made in Russia. Most of the above-mentioned items are available from stock, for the remaining ones we offer the fastest possible delivery times.

Condition: used, Year of construction: 1999, Lathe with 4 tools only for 3-cylinder crank shaft Dodpfsw Dufiox Abuocc *

Condition: used, Year of construction: 1998, Control Siemens 840 D swing diameter over slide rest 650 mm max. turning speeds 3800 min/-1 spindle diameter in front bearing 150 mm spindle bore 92 mm spindle head A8 DIN55026 number of tool places 2x 12 Pos. tool taper VDI 40 Dedpfxsx I Simo Abujcc weight of the machine ca. 7,0 t In our opinion, the machines are in good used condition Condition and can be viewed under power by appointment. Technical features: - Nominal length: 1500 mm Accesories: - chip conveyor - Felsomat loading system - lathe chuck - milling body There are 2 identical machines available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, turning length 1500 mm connected load 108 kVA total wight 19 t nominal voltage AV 400 V rated current 156 A In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 4 machines available. Dcjdpfx Absx Ik Tweuec Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2013, In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Dedpfx Abox Ik Tdeuecc Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2019, operating hours: 15,551 h, functionality: fully functional, controller manufacturer: Siemens, controller model: SINUMERIK 840D sl, General Year of manufacture: 2019 Operating hours: 15,551 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 600 mm Maximum cutting circle mm 200 Stroke over center mm 100 Maximum clamping diameter mm 110 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 705 Longitudinal stroke Z-/W-axis mm 705 / 705 Cross stroke X-axis mm 180 Cross stroke X-/U-axis mm 180 / 180 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 700 Tool holder Short cone according to DIN 55026: Size: 8 Theoretical diameter of cone mm: 139,735 Tool drum bearing diameter in the front bearing: 160 mm Chuck mount: 180 mm Dcodpfjwgm Hkox Abujc Chuck diameter up to 260 mm Workpiece spindle bearing diameter in the front bearing: 170 mm Guidance system for machining units: Rolling guides with rollers, size 55 Spindle Maximum power at 100% load: 24 kW Spindle speed: 0-2000

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1325.0458-14, controller manufacturer: Siemens, input frequency: 50 Hz, input current: 190 A, TECHNICAL DETAILS Electrical Operating voltage: 400 V Dsdpfx Abowx Hktjujcc Phases: 3 AC Frequency: 50 Hz Fusing: 250 A Rated current: 190 A EQUIPMENT Lathe with 4 tools, suitable only for 3-cylinder crankshaft

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: MK 15982, center width: 700 mm, overall weight: 18,000 kg, TECHNICAL DETAILS Dcjdpfx Abswx E Tmjusc General Data Distance between centers: 700 mm Maximum swing diameter: 200 mm Specification Lathe with tools: 4 Suitable for: 3-cylinder crankshaft MACHINE DETAILS Machine weight: approx. 18 t EQUIPMENT Lathe with 4 tools only for 3-cylinder crankshaft

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: G3169-0110, turning length: 530 mm, turning diameter: 420 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, overall weight: 4,700 kg, turning diameter over bed slide: 800 mm, HYUNDAI WIA L200SY CNC TURNING CENTER Year: 2012 | Fanuc 18i-TB CNC Control SN: G3169-0110 • 5-Axis CNC Turning Center – Hyundai WIA L200SY • Main Chuck: 8″ | Sub Spindle: 5″ • Live Tooling & Y-Axis + C-Axis indexing • Max Turning Diameter: approx. 419–420 mm / 16.5″ Djdpjx I A Hcsfx Abuscc • Max Turning Length: approx. 520–530 mm / ~20.5–20.9″ • Swing Over Bed: approx. 800 mm / 31.5″ • X Travel: approx. 220 mm / 8.7″ • Z Travel: approx. 550 mm / 21.7″ • Y Travel: approx. 80 mm / 3.1″ • Max Spindle Speed: up to 4,000 rpm • Main Spindle Power: ~20 HP (~15 kW) • Sub Spindle Speed up to 6,000 rpm • C-Axis indexing: 0.001° possible • Tool Stations: approx. 12 • Coolant system and chip conveyor included • Approx. Dimensions: 120″ × 68″ × 80″ • Approx. Weight: ~10,500 lbs (~4,760 kg) NOTE: MACHINE WAS REMOVED FROM GOOD WORKING CONDITION 2 YEARS AGO. PLANNED TO PUT BACK IN SERVICE BUT SELLER WILL NO LONGER BE DOING MACHINING.

Condition: excellent (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial & Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Dedpfjwhylvex Abujcc Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Dcodpfxexpqm Ro Abusc Front door: partial opening M0 / full opening

Condition: new, functionality: fully functional, fuel type: electric, color: yellow, Year of construction: 2026, These high-speed crushers are manufactured in two different combinations as open rotor and closed rotor. Vertical shaft impact crushers (VSI) are designed with a unique rock-on-rock crushing principle, which significantly reduces the wear costs while offering superior cubical shape for the best quality fine aggregate production. The fact that it reduces their service requirements and times, and to increase their crushing performance with their low investment costs. Dodpfsyhlfmox Abuecc VSI-1000 technical specifications: Model: VSI-1000 OR Capacity: 150-400 T/H Rotor Size: Ø 1000mm Maximum Feeding: 100mm Motor Power: 2 x 200-250 kW Speed: 50 – 70 ms Weight: 19000 kg General Specifications and Features: – Fine product, low wear cost, cubic shape, application flexibility and maintainability. – Rotor and crushing chute with stress relieved welding – Inner surfaces of the crusher is coated with wear resistant lining plates – Hydraulic opening cap – Automatic lubrication system

Condition: new, functionality: fully functional, fuel type: electric, color: yellow, overall weight: 14,000 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE VSI Vertical shaft impact crushers are used to obtain fine sand and fine gravel from the hardest with a high degree of abrasive materials such as basalt, granite, gabbro, riverstone etc. This type of crushers acting as tertiary crushers in facilities with it’s high cubic ratio and fine product. These high-speed crushers are manufactured in two different combinations as open rotor and closed rotor. Vertical shaft impact crushers (VSI) are designed with a unique rock-on-rock crushing principle, which significantly reduces the wear costs while offering superior cubical shape for the best quality fine aggregate production. The fact that it reduces their service requirements and time, and to increase their crushing performance with their low investment costs. General Specifitions and Features: - Fine product, low wear cost, cubic shape, application flexibility and maintainability. - Rotor and crushing chute with stress relieved welding - Inner surfaces of the crusher is coated with wear resistant lining plates - Hydraulic opening cap -Automatic Lubrication system • Model: FABO VSI-900 • Type: Vertical Shaft Impact Crusher Closed rotor Dsdpfx Aboyg Ayxouocc • Capacity: 100-300 tph • Max Feeding: 45 mm • Rotor Size: Ø 900 mm • Speed: 50-70 m/s • Motor: Heavy duty GAMAK, 2 X 160-200 kW Bearings: Heavy duty SKF-FAG • Weight: 14000 kg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,900 kg, total height: 25,000 mm, total length: 2,710 mm, total width: 1,040 mm, input voltage: 400 V, We offer a high-performance, low-speed two-shaft shredder designed for effective and precise shredding of aluminum materials, including: 🔹 rods 🔹 strands 🔹 wires 🔹 flat bars 🔹 cables The specially engineered shredding system prevents material from being dragged or crushed — aluminum is efficiently cut, not compressed. The knife design ensures clean and accurate cutting and eliminates the risk of vertically fed material passing through the chamber unshredded. The knives are made of certified, wear-resistant steel. The shredder is equipped with gear motors from a reputable manufacturer. Dodpfx Abotvdcyeujcc Available motor configurations: 2 × 18.5 kW or 2 × 22 kW. Fraction size – to be agreed upon with the customer. Model RS8: working shaft length of 600 mm – identical construction to RS800 and RS1200 models. Manufactured in Poland.

Condition: new, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE VSI Vertical shaft impact crushers are used to obtain fine sand and fine gravel from the hardest with a high degree of abrasive materials such as basalt, granite, gabbro, riverstone etc. This type of crushers acting as tertiary crushers in facilities with it’s high cubic ratio and fine product. These high-speed crushers are manufactured in two different combinations as open rotor and closed rotor. Vertical shaft impact crushers (VSI) are designed with a unique rock-on-rock crushing principle, which significantly reduces the wear costs while offering superior cubical shape for the best quality fine aggregate production. The fact that it reduces their service requirements and time, and to increase their crushing performance with their low investment costs. General Specifitions and Features: - Fine product, low wear cost, cubic shape, application flexibility and maintainability. - Rotor and crushing chute with stress relieved welding - Inner surfaces of the crusher is coated with wear resistant lining plates - Hydraulic opening cap -Automatic Lubrication system • Model: FABO VSI-900 • Type: Vertical Shaft Impact Crusher Closed rotor • Capacity: 100-300 tph • Max Feeding: 45 mm Dsdpfoxryafox Abuscc • Rotor Size: Ø 900 mm • Speed: 50-70 m/s • Motor: Heavy duty GAMAK, 2 X 160-200 kW Bearings: Heavy duty SKF-FAG • Weight: 14000 kg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO Concrete Mixers; single shaft, twin shaft and planet-type models are produced in three different models and different capacities. The durable and long-life wearing plates, reinforced mixing arms and paddles, has been projected by our engineers to suit every need and capacity. Our mixers have a significant market share both at home and abroad with the price advantage brought by mass production, short delivery time, quality manufacturing and spare part supply guarantee. Technical details: Dcsdpfxoxradqj Abujc  Type: Twinshaft mixer (TWS 02)  Wet concrete capacity: 2 m3  Dimensions (length x width x height): 2000 x 3400 x 2450 mm  Feeding capacity: 3000 lt  Fresh concrete capacity: 2500 lt  Compacted concrete capacity: 2000 lt  Motor power: 2 x 45 kW  Hydraulic discharge gate  Automatic lubrication FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO Concrete Mixers; single shaft, twin shaft and planet-type models are produced in three different models and different capacities. The durable and long-life wearing plates, reinforced mixing arms and paddles, has been projected by our engineers to suit every need and capacity. Our mixers have a significant market share both at home and abroad with the price advantage brought by mass production, short delivery time, quality manufacturing and spare part supply guarantee. Technical details:  Type: Twinshaft mixer (TWS 03)  Wet concrete capacity: 3 m3  Dimensions (length x width x height): 2300 x 4090 x 2750 mm  Feeding capacity: 4500 lt  Fresh concrete capacity: 3750 lt  Compacted concrete capacity: 3000 lt  Motor power: 2 x 55 kW  Hydraulic discharge gate  Automatic lubrication Dsdpfxowrbavo Abuocc FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, Year of construction: 2025, Product overviews of Waste Industrial Timber Wood Pallet Double Shaft Shredder Shredders can generally be used to shred hard-to-break plastics, rubber, large tires, large nylon materials, large pieces of fishing nets, fibers, paper, wood, electrical devices, cables, PET bottles, cardboard, wood, plastic barrels, etc. Solid objects. The main function of the equipment is to squeeze the bulk materials and large-diameter drum metal materials that are not convenient for transportation through the shear of the shredder, and shred them into sheets that meet the requirements. The main structure of the double-shaft shredder is a feed hopper, a knife roller, a driving device, a bearing, a hydraulic system, and an electric control box system. Working principle: All kinds of waste materials enter the shredding chamber through the feeding hopper. The double-knife rollers do relative rotation to shred and cut the materials, and then the materials are discharged from the shredder to achieve the shredding of large pieces of materials. Applicable materials and fields Double shaft shredder is one of ethential equipment for waste recycling in following fields and materials: +Bulky Waste: Sofa,Mattress,Chair, Funiture,Windows,etc +Industrial Waste: Textiles,Leather,Rubbers, Leathers ,General industrial waste,etc +Hazardous Solid waste: Medical waste,Paint sludge,Radioactive waste,Hazardous waste oil drum,Jumbo bag,etc +Paper waste: Carton,Cardboard,Book,Newspaper,Document,Brochure,Packaging paper,etc +Garden waste: Branch, Wood pallet, Trunks, Boards,etc +Domestic waste +Biomass straw: Straw, Bamboo, Corn, Sorghum straw, Bean straw, Fruit shell, Palm shell, etc Dsdpfevn D I Nox Abuecc +Scrap metal: Car Shell, Aluminum casting, Household appliances, Scrap light metal,Automobile hub,etc +Paper mill waste: Paper mill slag, Paper mill rope, Paper mill offcut,etc +Wood pallet, scrap furniture, waste chair, tree roots recycling, etc. Double shaft shredder main body: The main body is welded with excellent steel plate to ensure the stability of the equipment under heavy load for a long time. Bearing: The bearing seat is split and easy to disassemble, and the movable knife, fixed knife, bearing and other parts can be quickly removed, and it is easy to maintain and replace the knife. The sealing structure can avoid the contact of broken materials and grease, and can also protect bearings and gears when handling liquid materials.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm Djdpfx Aoxdmgvobuocc CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: ready for operation (used), functionality: fully functional, turning diameter: 1,700 mm, center height: 630 mm, center width: 4,000 mm, spindle speed (max.): 400 rpm, empty load weight: 4,000 kg, TECHNICAL DETAILS Centre height: 630 mm Swing diameter over bed: 1,300 mm Swing diameter over carriage: 1,000 mm Dcodpeydv N Uefx Abuec Swing diameter over removable bed section: 1,700 mm Centre distance: 4,000 mm Bed width: 700 mm Spindle bore: 120 mm Spindle speed: 2.8 - 400 rpm MACHINE DETAILS Control: Conventional Dimensions & Weight Dimensions (L x W x H): 6,800 x 2,200 x 2,000 mm Unladen weight: 11,000 kg Transport packages: 2 EQUIPMENT Documentation Three-jaw chuck Four-jaw chuck Removable bed section Quick-change tool holder Fixed steady rest Travelling steady rest

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 385 mm, turning diameter: 350 mm, overall weight: 4,200 kg, controller model: Fanuc Series 01-TB, The machine's hydraulics have been renewed! TECHNICAL DETAILS Max. turning diameter: 350 mm Max. turning length: 385 mm Djdpfoyf Aflex Abuecc Turret tool changer: 12-position EWS MACHINE DETAILS Control system: Fanuc Series 01-TB Dimensions & Weight Dimensions (L x W x H): 2,700 x 1,800 x 1,700 mm Machine weight: 4,200 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 102, turning height: 1,250 mm, workpiece weight (max.): 8,000 kg, turning diameter: 1,550 mm, faceplate diameter: 1,250 mm, spindle speed (max.): 3,000 rpm, TECHNICAL DETAILS Dcodpfsybbi Iex Abusc Turning height: 1,250 mm Workpiece weight: 8,000 kg Turning diameter: 1,550 mm Faceplate diameter: 1,250 mm Faceplate speed: 200 rpm Spindle speed: 3,000 rpm Tool changer: 15 positions MACHINE DETAILS Control: Siemens 840 D Type of supply current: Alternating current (AC) Year of last overhaul: 2000 EQUIPMENT C-axis Infinitely variable speed 3-jaw hydraulic-mechanical chuck Coolant system Belt filter unit Internal coolant supply

Condition: ready for operation (used), Year of construction: 1997, operating hours: 38,000 h, functionality: fully functional, machine/vehicle number: 325202, turning length: 305 mm, turning diameter: 210 mm, rotational speed (max.): 5,000 rpm, bar passage: 42 mm, controller model: Heidenhain Elektro Pilot 1190, TECHNICAL DETAILS Swing diameter over bed: 440 mm Swing diameter over cross slide: 210 mm Turning length: 305 mm Bar capacity: 42 mm Spindle speed: 5,000 rpm Turret: 12 stations Tool holder: VDI 20 MACHINE DETAILS Control: Heidenhain Elektro Pilot 1190 Dimensions & Weight Dimensions (L x W x H): 2,800 x 1,651 x 1,771 mm Machine weight: approx. 3,000 kg Power-on hours: approx. 38,000 h EQUIPMENT Coolant system Dcjdoyfgttjpfx Abuoc Tailstock Documentation

Condition: ready for operation (used), Year of construction: 2005, operating hours: 20,634 h, functionality: fully functional, machine/vehicle number: 051116206, turning length: 1,000 mm, rotational speed (max.): 4,000 rpm, bar passage: 52 mm, controller model: Fagor 8040 TC, TECHNICAL DETAILS Swing diameter over bed: 450 mm Swing diameter over cross slide: 215 mm Turning length: 1,000 mm Bar capacity: 52 mm Spindle speed: 4,000 rpm MACHINE DETAILS Control unit: Fagor 8040 TC Dimensions & Weight Machine dimensions (L x W x H): 3,000 x 1,995 x 2,001 mm Machine weight: approx. 2,400 kg Operating hours: 20,634 h Djdpfoycu Igsx Abuecc EQUIPMENT 4-position tool holder Tailstock Documentation