Used Lead Screw Lathe for sale (11,186)

Condition: good (used), Year of construction: 1988, Weiler lathe Type Condor B 2-axis digital readout Center height 165 mm Center distance 750 mm Rotation over bed 330 mm Rotation over cross slide 185 mm Spindle bore 40 mm Connected load 3 kw Speed 22-2800 rpm Tailstock MK 3 Coolant pump (not connected) work light Automatic longitudinal and planar feed spindle brake - Folding jaw chuck guard Kedpfx Afevgmbveajdh - splash guard Weight approx. 1040 kg 3 jaw lathe chuck Multifix B Rotating center point

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C from Vocational School Technical Data: >> Year of manufacture: 1992; Machine No. 92 160 3260 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch threads possible >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be engaged >> Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: >> 3-axis digital readout by K&C with manual Features: switching mm/inch, coordinate mode selection ABS/INC, halving of display value, reference mark, 200-tool programming, taper calculation, radius/diameter, quick zeroing, counting direction reversal Kjdpfxsx Eb A Ue Afajdh >> Collet chuck with NEW collets from 3 to 26 mm (in 1 mm increments) >> 160 mm 3-jaw chuck (Kelistangen) with 1 set of jaws >> Quick-change toolpost with 4 steel holders >> Bed stop >> Electronic spindle guard >> Rear panel >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe, toolroom accuracy, year 1992, in very good condition. The machine is of course fully functional. The carriages all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces with ground finish quality. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Condition: good (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 180 mm, spindle bore: 40 mm, turning diameter: 330 mm, turning diameter over bed slide: 330 mm, center height: 165 mm, turning length: 750 mm, quill stroke: 110 mm, rotational speed (max.): 2,800 rpm, rotational speed (min.): 22 rpm, power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, Weiler Condor AC stepless rotary machine Kdsdporuqzcefx Afash

Condition: good (used), functionality: fully functional, turning diameter: 240 mm, turning length: 600 mm, For sale is a Boley lathe The guides and the concentricity are still very good (see pictures) center distance 600mm turning diameter 240 mm spindle bore: 20 mm Many accessories (cabinet incl.) IDEAL COLLECTION DATE 06.02.2024 Kjdpfx Aferdf A Djasdh On request, for an extra charge, loading and transport (Europe-wide) can be organized. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Weiler Ergodor lathe Max. Turning diameter over bed: approx. 320 mm Max. Turning diameter over support: approx. 160 mm Kdodpfoq Ixxysx Afaeh Max. Turning length: approx. 470 mm Bar passage: approx. 36 mm Spindle: Speed range: approx. 30 - 3550 rpm Spindle nose: A 2 - 5 Drive power: approx. 3.0 kW Automatic longitudinal & face feeds: Feed range: approx. 0.020 - 2.0 mm/rev Suitable for threads: - metric 0.20 - 12 mm Inch 80 - 2 Gg/ Diametral - Pitch thread 160 - 5.5 Dp Module 0.1 - 4

Condition: good (used), Centre height: 360 mm Centre distance: 5000 mm Swing diameter over bed: 720 mm Swing diameter over cross slide: 560 mm Swing diameter in gap: 1000 mm Spindle bore: 82 mm Speed range: 16 - 800 rpm Bed width: 445 mm Tailstock taper: MT 6 Drive power: 11 kW Dimensions (L x W x H): 6750 x 1500 x 1700 mm Weight: 6500 kg Siegfried Volz Werkzeugmaschinen Kdjdpfx Ajxtu Dusfaoh Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), GDW LZ 350 incl. 3-axis digital readout - Center height: 175 mm - Swing over bed: 310 mm - Swing over cross slide: 195 mm - Distance between centers: 800 mm - Spindle bore: 43 mm - Speed range: 45-2000 rpm Kedpfow Rfztox Afaedh - Automatic longitudinal / cross feeds - Tailstock / quill stroke: 110 mm - Thread cutting: metric / imperial etc. - Multifix tool post with inserts - 3-jaw chuck: 200 mm - Collet chuck system incl. 22 collets - 2x emergency stop - Coolant system - Various change gears, 5 pieces - Drill chuck - Live center - Chip guard at rear - Machine feet - Various tools - Documentation Dimensions: LxWxH: 1.85 x 0.9 x 1.5 meters / Weight: 850 kg Subject to errors and input mistakes.

Condition: good (used), Year of construction: 1988, Lathe KMK 40 Speed 1800 rpm Turning length 1000 mm with 3 jaws 4 jaws Multix with 4 inserts Rotating center point Face plate Collet chuck with collet set Kdsdpfou Uh U Iox Afaoh

Condition: excellent (used), functionality: fully functional, High-Precision Lead and Feed Screw Lathe Model B30 LZS with Accessory Cabinet and 3-Axis Fagor DRO from UNI Technical Data: >> Centre Height: 120 mm >> Centre Distance: 560 mm >> Spindle Bore: 30 mm >> Max. Swing Diameter: 250 mm >> Longitudinal and Cross Feeds >> Thread Cutting: Metric, Module, Inch >> Infinitely variable spindle speeds from 30–3000 rpm Accessories: - 3-Axis Fagor Digital Readout - Tool cabinet including: >> 3-jaw chuck >> 4-jaw chuck >> Toolholder >> Drill chuck; live centre >> Collet chuck with collets >> Fixed and travelling steady rest >> Machine feet >> And much more Kodpfexyh Ndsx Afaodh About the Machine: Offered is a Lorch high-precision lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The machine runs quietly, even at high speeds. Equipped with a 3-axis Fagor digital readout and a wide range of accessories. The machine was previously installed in a university. You are welcome to inspect the machine under power on site and see its excellent condition for yourself.

Condition: used, Year of construction: 1996, functionality: fully functional, turning diameter: 710 mm, turning length: 3,000 mm, Universal lathe FAT Poland Model: TUR 710 x 3000 Year of manufacture: 1996 Accessories: Digital readout 3-jaw chuck Tool holder Kedpfx Afexxm A Heaodh Steadies Live centre

Condition: like new (used), Year of construction: 1997, functionality: fully functional, center height: 150 mm, center width: 630 mm, spindle bore: 40 mm, turning diameter: 340 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 55 rpm, overall weight: 1,450 kg, Schaublin 150A Draai bank Specificatie Manufacturer Schaublin Type 150 Year of manufacture 1997 Besturing conv. Max draaidiam. 340mm Distance between centers 630 mm Hoofdspil Toerental 55 tot 3000 omw/min Opname Camlock D1-4" Spantangopname Schaublin B32 Extras Multifix B plus 7pcs reedschaphouders 3 and 4 klauw Tegencenter Spantang set Koelmiddel inst. Heidenhain DRO (2-aces) Machine lamp Kodpfewgd R Hsx Afasdh Conusliniaal Fast chip installation Vaste en meelopende bril Enz.

Condition: excellent (used), Year of construction: 1995, Digital display Turning diameter 120 mm Turning length 700 mm Spindle speed 2000 min-1 Tailstock Kdodpfx Afewhrg Seaeh

Condition: excellent (used), Year of construction: 2006, Centre height: 160 mm Centre distance: 650 mm Spindle speed: 2,500 min-1 Multifix Kjdpfx Ajw Sn Irofaedh Tailstock Accessories

Condition: good (used), Year of construction: 1999, TOS SU 150 Variant Kdjdpsx Dy I Tefx Afaoh CNC Lathe TOS SU 1500 Variant with Heidenhain Control, year of manufacture 1999, in excellent original condition The machine comes from the special production department of a renowned German mechanical engineering company. CE compliant! Technical Details: Year of manufacture: 2004 Working Range Swing diameter over bed: 1500 mm Swing diameter over support: 1190 mm Swing diameter over extended slide with T-slots: 1100 mm Swing diameter over right-angle hardened guide with T-slots: 1020 mm Distance between centers: 2000 mm Max. workpiece weight (without/with support): 6000/8000 kg Spindle size: 11 DIN 55027; bayonet Spindle bore: 128 mm Speed range: 4 - 630 rpm Main drive power: 37 kW Max. spindle torque: 12,000 Nm Tailstock Quill diameter: 165 mm Internal taper: 100 (1:20) mm Reduction sleeve: 100 (MK6) Total power consumption: 67 kVA Weight: 9,400 kg The universal spindle lathe SU 1500 Variant is a numerically controlled machine designed for roughing and finishing of shaft and flange parts, as well as for threading, drilling, taper turning, and machining of various rotationally symmetrical surfaces. The machine is built with a rigid horizontal bed, the guideways are hardened and ground, and the counter surfaces on the longitudinal slides are coated with Turcite B sliding material. The SU 1500 Variant lathe is a machine with automatic cycle control, equipped with a Heidenhain control system. The feed drive for the longitudinal axis (Z-axis) is provided by a servo drive directly to the ball screw. The cross-feed drive (X-axis) is also provided by a servo drive directly to the ball screw. Both feeds are measured by rotary encoders mounted on the servo motors. The machine can be operated either manually or in controlled (automatic) mode. About the machine: Offered here is a CNC lathe TOS SU 1500 Variant with Heidenhain control, year of manufacture 1999. This lathe is in very good original condition. Coming from a shop where it was only used occasionally for special builds. The control system is very user-friendly. The ways are regularly lubricated by the central lubrication system. The TOS SU 1500 Variant has been mechanically and electrically inspected by us. Take the opportunity to view and test the TOS SU 1500 Variant under power at our premises. You will find further lathes from reputable manufacturers on our website.

Condition: used, Year of construction: 1987, Lead and draw spindle lathe Make: Boehringer Model: DUE 560 Year of manufacture: 1987 used Technical data: turning diameter 250 mm turning length approx. 1200 mm Rotation Ø over bed 560 mm Rotation Ø over facing slide 365 mm Max. workpiece between the centers 500-800 kg Spindle diameter in front bearing 100 mm Spindle bore 62 mm Spindle head DIN 55022 No. 8 Travel Face slide travel 345 mm Top slide travel 125 mm Tailstock/pinsØ 80 mm Tailstock holder MK 5 Quill stroke 190 mm Longitudinal feed 60 x 0.0315-28 mm/1 Face feeds 60 x 0.016-14 mm/1 Tapping capacity 0.125-112 mm Total power requirement 20 kW Space requirement approx. 3.5x2.0x2.2 m Weight: approx. 2.5 tons Ksdpfjtud S Uex Afaodh

Condition: reconditioned (used), Precision guide and spindle lathe Make: GDW Model: LZ 250 S Year of manufacture: 1998 - overhauled, repainted RAL7035 light gray Mach. no.: 069 Centre height: 125 mm Centre width: 500 mm with guarantee geometric acceptance with test report Accessories: Kjdpfx Aepz Hubefaedh - 3-axis digital display ISKAR NP-20T-V with V = c for constant cutting speed - Quick-change tool holder base body size A - Bed stop - Coolant system - Chuck protection hood, electrically secured - Chip rear wall - Operating instructions - Used as seen -

Condition: refurbished (used), Year of construction: 2007, Universal lead and feed spindle lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 - overhauled newly painted RAL 7035 light gray Mach. no.: CK17 Center height: 140 mm Center width: 500 mm Spindle bore: 40 mm with guarantee geometric acceptance with test report Accessories: - 3-A digital display SIEMENS - Chuck protection hood with electrical protection - Drive motor braked - Quick-change tool holder base body size A - Bed stop - Covered lead and feed spindle - Chip rear wall Kdodjv D Ip Nspfx Afash - Pull-out chip tray - Operating instructions - Used, as seen -

Condition: reconditioned (used), Year of construction: 1974, Universal lead and spindle lathe Make: WEILER Model: Commodor Year of manufacture: 1974 - overhauled newly painted RAL 7035 light gray Mach. no.: 0068 Center height: 180 mm Center width: 1000 mm Spindle bore: 56 mm with guarantee geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-T new Kdodpjmgaddsfx Afaeh - Chuck protection hood with electrical protection - Quick-change tool holder size B - simple bed stop - Coolant device - Operating instructions - used, as seen -

Condition: reconditioned (used), Year of construction: 1990, Universal lead and feed spindle lathe Make: WEILER Model: Praktikum 160 B Kdsdpfshy Tdyox Afajh Year of manufacture: 1990 - overhauled newly painted RAL 7035 light gray Mach. no.: 90-160-2054 Center height: 160 mm Center width: 650 mm geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i T - covered lead and feed spindle - braked drive motor - coolant system - electrically secured chuck protection hood - quick-change tool holder size A - simple bed stop - chip back wall - operating instructions with guarantee used as seen The machine is technically corresponding to the state of the year it was built.

Condition: reconditioned (used), Year of construction: 1989, Universal lead and spindle lathe Make: WEILER Model: Condor B Kdjdpfx Ajg R S Rcefajh Year of manufacture: 1989 - overhauled newly painted RAL 7035 light gray Mach. No.: 1401 with guarantee Accessories: - 3-A digital display FAGOR Innova 30i T, new - Chuck protection hood with electrical fuse, new - Quick-change tool holder base body size B - Bed stop - Coolant device - Chip back wall - Operating instructions -used, as seen -

Condition: like new (used), Year of construction: 2015, spindle bore: 105 mm, turning diameter: 710 mm, center height: 355 mm, turning length: 1,500 mm, Turning diameter in gap: 960 mm, SN 710S x 1500 Year of manufacture 2015 4 jaw faceplate Acu Rite digital display Coolant tank Kjdpfx Aevq Ibxjfaedh Longitudinal stop Chip guard at the rear Chuck guard

Condition: new, Year of construction: 2024, Working range Center distance 1000 mm Turning diameter over bed 356 mm Rotation Ø over support 220 mm Bed width 206 mm Travel paths X-axis travel 178 mm Z1-axis travel 92 mm Swivel range top slide ± 50° Main spindle Speed range, high 550 1/min - 3000 1/min Speed range, low 30 1/min - 550 1/min Kdjdou Sklyjpfx Afash Spindle holder Camlock D1-4 Spindle bore 38 mm Spindle cone 5 MK Feed rate Feed X-axis 0.014 mm/rev - 0.206 mm/rev Feed Z-axis 0.043 mm/rev - 0.653 mm/rev Thread cutting Thread cutting, metric (37) 0.4-7 mm Thread cutting Whitworth (28) 4-56 TPI Tailstock Tailstock pinol diameter 45 mm Tailstock taper 3 MK Tailstock quill stroke 120 mm Tailstock cross adjustment ± 10 mm Drive power Motor power main drive 4 kW Dimensions and weights Dimensions (length x width x height) 1.95 m x 0.75 m x 1.55 m Weight 880 kg

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 1,350 mm, spindle bore: 120 mm, turning diameter over bed slide: 1,000 mm, center height: 675 mm, turning length: 5,000 mm, Heavy-duty lathes POREBA - Lathes after general overhaul Center height mm 675 Rotation Ø over bed mm 1350 Rotation Ø over bed slide mm 1000 Rotation Ø in the offset mm 1600 Length of offset A1-15/DIN 55027 mm 220 Center distance mm 5000 Spindle bore mm 120 Taper in main spindle metric 130 Front spindle bearing mm 220 Spindle mount Standard / fixing screws M22 ISO-702/I A1-15 Option DIN 55027/15 Max. Workpiece weight - between centers: kg 9000 - with 2 steady rests: kg 15000 - overhung: kg 2000 Bed width mm 660 Turning tool cross-section (HxW) mm 32 x 40 SPEEDS mechanical 18 speed levels Main motor power: kW 45 Number of steps: 18 Speed range: rpm 10-500 rpm or 12.5-630 rpm RIDING STOCK Quill diameter mm 190 Quill stroke mm 300 Cross adjustment mm +/- 15 ADJUSTMENT Number of steps 70 Range of longitudinal feeds mm/rev 0.07 - 10 Ksdpfehmuuyox Afaodh Range of face feeds mm/rev 0.035 - 5 Feed range of the top slide mm/rev 0.017 - 2.5 Rapid traverse lengthwise mm/min 4000 Rapid traverse flat mm/min 2000

Condition: new, Year of construction: 2024, functionality: fully functional, spindle bore: 45 mm, turning diameter over bed slide: 360 mm, center height: 180 mm, center width: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 35 rpm, bed width: 250 mm, - Demonstration machine - Kedpewrndzjfx Afaedh - Handwheel on the left of the support - with 3-axis digital display FAGOR INNOVA30iT (Art. No. 103877) * For more information on the exact standard equipment and available options, visit us online or call us directly *

Condition: new, Year of construction: 2024, functionality: fully functional, spindle bore: 45 mm, turning diameter over bed slide: 360 mm, center height: 180 mm, center width: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, bed width: 250 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 35 rpm, quill mount: MK 3, Equipment: rotational speed infinitely variable, - Demonstration machine - - Handwheel on the left of the support - with steplessly variable spindle speeds and 3-axis digital display FAGOR INNOVA30iT (Art. No. 103878) Kedpowrngcefx Afaodh * For more information on the exact standard equipment and available options, visit us online or call us directly *