Used Weiler for sale (183)

Condition: good (used), Weiler E70 Hollow Spindle CNC Lathe Ijlhcowmqkyjdw Hoic Year: 2003 Distance Between Centres: 2000mm Spindle Bore: 8" (200mm) Machine with: Front & Rear chucks Tailstock Fixed Steady

Condition: excellent (used), Year of construction: 1992, Lead & feed screw lathe Fab. WEILER Typ. PRAKTIKANT 160B year 1992 Technical data Make: Weiler Type: Praktikant 160B Center width: 650 mm Iislhjtu Hu Ijcdw Hoc Rotation over bed 320mm Rotation over cross slide 192mm Center height: 160 mm Spindle bore: 40 mm Rated power: 2.4 / 3 KW Speeds: 48 - 2500 rpm Dimensions: approx. L 2.20 x W 1.10 x H 1.40 m Weight: approx. 1 t Accessories - 3 jaw chucks - Emergency off All data without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: like new (used), turning length ca. 750 mm turning diameter over bed 380 mm Iijlhcdjud Inysw Hec turning diameter over slide 150 mm control Sinumerik System 3 Operating hours: 296 hours The lathe is as good as new and is fully functional.

Condition: used, Year of construction: 1980, turning diameter over bed 297 mm turning diameter over slide rest 160 mm turning length 800 mm Iolhov Aci Iscdw Hoic total power requirement 2 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,8*1*1,2 m Movie: ?v=YMWtWeyU1M8

Condition: good (used), Perfect high throughput machine for kebab, burger or pet food factory. Islhcewlfxvodw Hjic

Condition: good (used), Year of construction: 2014, drilling capacity: 60 mm, spindle mount: MK 5, Manufacturer: WEILER MAS Type: VOM 50 Year of manufacture: 2014 Specifications Metric US Standard Arm length 1250 mm Max. drill Ø (iron) 50 mm Max. Tap diameter 48 M Quill stroke 350 mm Max. distance spindle - table 1555 mm Min. distance spindle - table 305 mm Speed 800 rpm Iiolhcdwjwpkr Nj Hjc Tool holder 5 ISO/Bt/Mk Column diameter 400 mm Dimensions (estimated) Length 3200 mm Width 1325 mm Height 2970 mm Weight 6750 kg Please note: The information on this page has been provided by us to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contract conditions will be provided. We recommend that you verify all important details.

Condition: good (used), Chip conveyor for WEILER E50 and E60 turning length 1000 mm Iiolhcdwewqz Rxo Hoc with coolant pump and extraction unit, year 2008, in good condition.

Condition: excellent (used), Year of construction: 1986, Functionality: fully functional, Weiler Praktikant 160 B lead and feed screw lathe with 3-axis digital readout K&C NEW Technical data: >> Year of manufacture: 1986, machine number 86-160-348 >> Center height: 160 mm >> Distance between centers: 650 mm >> Spindle speeds: 8 steps; from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 to 0.63 mm/rev >> Usable threads: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal >> Collet clamping device, collets as new from 1 to 29 mm in 1 mm increments >> 160 mm new three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop Iolhcdwjwthbio Hsic >> Rear wall >> Machine leveling feet >> Coolant device About the machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe built to toolroom precision in very good condition. The machine is, of course, fully functional. The Weiler was completely dismantled and newly painted in light grey. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces as if ground. Take the opportunity to inspect the machine under power on site and verify its condition for yourself.

Condition: used, turning diameter over bed / mm Iolhcdwjwgi Tmj Hoic turning diameter over slide rest / mm turning length / mm

Condition: used, x-travel 500 - 1000 mm y-travel 300 - 600 mm z-travel 300 - 600 mm total power requirement ? kW weight of the machine ca. ? t dimensions of the machine ca. ? m Isljvw D Egjhcdw Hoic Company liquidation of a tool shop

Condition: good (used), Year of construction: 1997, 1 used cycle lathe Brand Weiler Type E 35 Year of construction 1997 Ielov T Rrlehcdw Heic With 2-axis Siemens Sinumerik 805 Spindle bore: 54 mm Center distance: 950 mm Turn-over over bed: 410 mm Speed range: 4 – 3000 rpm With the following accessories: Multifix tool holder with various inserts Chuck guard 3-jaw chuck 250 mm Chip collection tray Chip protection wall with lighting Coolant system

Condition: used, Year of construction: 1997, Price: On request Iolhewnh I Sscdw Heic - Year: 1997 - Documentation available: Yes - CE mark available: Yes - Serial number: 270 - Control: CNC - Turning diameter: 420mm - Min. spindle speed: 4rpm - Center height: 210mm - Type digital: Weiler - Center distance: 900mm - Max. spindle speed: 3000rpm - Bore diameter: 55mm - Digital: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: new, Year of construction: 2025, CONDOR VC plus The new dimension in conventional precision lathes. A high-quality, powerful and energy-efficient precision lathe for the highly productive area of production and toolmaking, but also for training and further education High-quality, energy-efficient, precise and universally applicable in production, training and further education. It impresses with: future-oriented technology maximum accuracy durability user-friendly ergonomics minimum space requirement and a wide range of accessories. The consistent and innovative further development of the tried-and-tested Condor series is the economical and intelligent solution for your daily applications. Technical data: WORKING AREA Center height 180 mm Swing diameter over bed 360 mm Swing diameter over facing slide 190 mm Center width 800 mm TURNING SPINDLE Spindle head DIN 55027/DIN ISO 702-3 size 6 Spindle bore 57 mm Spindle diameter in front bearing 90 mm MAIN DRIVE Drive power 60 %/100 % ED - / 10.5 kW Speed range 25 - 4,000 min-1 Number of speeds infinitely variable FEED RANGE Number stepless Longitudinal 0.01 - 6 mm/rev Plan 0.003 - 2 mm/rev THREAD CUTTING RANGE Metric thread 0.1 - 20 mm REITSTOCK Quill diameter 50 mm Quill stroke 110 mm Internal taper DIN 228 MK 3 ACCEPTANCE ACCURACY DIN 8605 Iisloqwipnjhcdw Hoc Equipped with WEILER WTS 15 VC plus screen display - Large, clearly arranged 15" touch screen, rotatable and tiltable, resolution 1366 x 768 - Change of operating screens via swipe movements - Operating functions can be called up via app manager - Control panels can be freely configured, placed and scaled as required - Drawings / sketches can be imported from PDF files Can be zoomed individually via USB interface - Video-supported maintenance of the machine - Context help menu (instead of screen display WEILER VC plus) The machine is located in our showroom in 71334 Waiblingen-Beinstein and is available immediately. Please contact us regarding equipment.

Condition: excellent (used), Cycle lathe Weiler E 50 / 1D Year of manufacture: 1999 Machine number: 684 Control: Weiler (Siemens 810D) Operating hours: 43,543 h (Machine overhauled by Schmeißer a few years ago) Technical data: Spindle speed: 1–625 / 4–2500 rpm (2 gear stages) Drive power: 17 kW Spindle torque: 1,200 Nm Spindle bore: 66 mm Center distance: 2,000 mm Center height: 280 mm Swing over bed: 570 mm Swing over cross slide: 340 mm Equipment/Accessories: - Interface for external programming - Parat toolholder including 6 holders - Operating manual - Coolant system - Various turning tools and drills - Chuck jaws - Four-jaw chuck - Live center - Machine feet The machine has been tested under power and is in flawless, immediately ready-to-use condition. Iiolhcdwjwtqnrj Hsc The machine bed is also in good condition. Price net, ex stock, loaded.

Condition: like new (used), Functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual Iislhcdswrm Dtew Hsc >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: used, Year of construction: 1961, turning diameter over bed 330 mm turning diameter over slide rest 165 mm turning length 800 mm total power requirement 3 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 2 x 1 x 1,5 m No. 1009 Lathe WEILER LZ-300 Islhcdjunug Sow Hoic Speed range 24-2800 1/min. Feed rates 0.013-1.27 mm/min Space requirement approx. 19 0x 700 mm, Weight approx. 700 kg. The e-lead spindle is removed from the machine 3-jaw chuck, collet quick-clamping device with various collets, 1 tool cabinet with various accessories tool cabinet with various accessories. Working area: 165 x 600 Drive: 3 kW

Condition: used, Year of construction: 2007, operating hours: 41,000 h, spindle bore: 165 mm, turning length: 3,000 mm, turning diameter: 830 mm, turning diameter over bed slide: 1,200 mm, quill stroke: 400 mm, quill diameter: 140 mm, torque: 8,000 Nm, Technical Specifications ----- Max. turning length: 3,000 mm Turning diameter: 830 mm Max. turning diameter over bed: 1,200 mm Bed width: 600 mm Spindle bore: 165 mm Spindle head DIN 55027 Gr 15 Chuck: Forkardt 3KS 800 mm Speed range: 1 - 280 / 4 - 900 rpm Gear ratios: 2 Torque: 8,000 Nm Number of turrets: 1 Sauter 4-station head turret for 140 mm chucks Tailstock Quill diameter: 140 mm Quill stroke: 400 Features Iolhcdjv Nhxzjw Hsic ----- Electronic handwheel Forkardt 3KS 800 mm hydraulic power chuck Chip conveyor

Condition: used, - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren Iiolhcdswnhgbjw Hjc

Condition: used, turning length 1000 mm turning diameter over bed 380 mm turning diameter over slide rest 190 mm number of spindle speeds 63 - 2000 U/min. turning speeds 18 Stk. spindle bore Ø 56.0 mm tailstock quill taper MT DIN 228 / MK 4 quill stroke 150 mm Ijlhcjv Rgwlsdw Hsic bed width 310 mm spindle taper DIN 55027 / 6 feeds - longitudinal 0.022 - 0.8 mm/U feeds - cross 0.011 - 0.4 mm/U thread M 0.3 - 10.0 mm bed width 305 mm voltage 380 V total power requirement 4.0 kW weight of the machine ca. 1600 kg range L-W-H 2320 x 1400 x 1600 mm Machine from a maintenance workshop Lathe with a precision-ground and induction-hardened bed. Very suitable for use in workshops and training centers, for example. Equipment: - Robust centerline lathe - GIVI MISURE "ME 8202" digital display, front left - RÖHM three-jaw chuck, Ø 200 mm - FORKARDT three-jaw chuck, Ø 200 mm - FORKARDT four-jaw chuck, Ø 200 mm - 2 chuck keys - Folding lathe chuck guard - MULTIFIX tool holder, size B, with 3 inserts - Movable tailstock - Chip guard, rear panel - 8 machine feet - 2 emergency stop buttons, front - Adjustable bed stop - Coolant system including coolant tray

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, turning length: 2,000 mm, center width: 2,000 mm, Cycle lathe Weiler E 50 / 2 Year of manufacture: 2000 Control: Weiler Operating hours: ~ 3,000h Iislhcdowq Dkzow Hec Technical Data: Spindle speed: 1-625 / 4-2500 min-1 Gear stages: 2 Drive power: 20/17KW Spindle torque: 1,200Nm Spindle bore: 66mm Tool holder: Multifix Center distance: 2,000mm Center height: 280mm Swing diameter over bed: 570mm Swing diameter over cross slide: 340mm Accessories: - Steady rest - Tailstock - Coolant pump - Various Multifix tool holders Further data to follow

Condition: excellent (used), Year of construction: 1987, Functionality: fully functional, Weiler Precision Lathe Model Condor 81 Lead and Feed Spindle Lathe with 3-Axis Digital Display from K&C NEW Technical Data: >> Year of manufacture 1987 Machine No. 87 835 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral-Pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Islowrmuxohcdw Hsic Accessories and Equipment: >> 3-axis digital display from K&C new, 12 months manufacturer's warranty with operating manual Functions: Switch mm/inch, coordinate selection ABS/INC, halving of display value, reference mark, tool programming 200 pcs, taper calculation, radius/diameter, quick zeroing, reversing of count direction >> 1 piece 3-jaw chuck 160 mm NEW, 2 sets of jaws >> 1 piece 4-jaw chuck 160 mm, 1 set of jaws >> Collet equipment and new collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear panel >> Coolant system >> Machine feet About the Machine: A used Weiler Condor 81 in very good condition is offered. The machine is, of course, fully functional and has been completely disassembled and repainted. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine on site under power.

Condition: used, Year of construction: 1989, turning diameter over bed 380 mm turning diameter over slide rest 190 mm turning length 1000 mm total power requirement 7,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,5*1*1,5 m No. 5291 1 used lead and feed spindle lathe WEILER Commodor 75 GS working range: Ø 380/190 x 1000 mm drive: 7,5 kW spindle bore 56 mm Speed range 13 - 2000 min-1 3-jaw chuck Multifix B Iiolsuyni Ejhcdw Hjc Chip tray documentation Space requirement approx. 2.5 x 1 x 1.5 Weight approx. 1700 kg

Condition: used, Technical data : Center width approx. 500 mm Center height above bed 125 mm 16 speeds from 125 - 2800 rpm Space requirement, length x width 1.2 x 0.6 m Estimated weight approx. 450 kg Islhjwrahxocdw Hjic . Scope of delivery : Hand lever quick clamping device Electrical monitoring of whether the part clamping lever is in the open or clamped position 1 set of collets from 3.0 - 25.0 mm, increasing by 1 mm Cross support with two tool holders Turret with 6 tool holders .

Condition: ready for operation (used), Functionality: fully functional, Weiler lever-operated lathe About the machine: Islhowrfudscdw Heic A used Weiler lever-operated lathe in good condition is offered. The machine is, of course, fully functional. Accessories as shown in the pictures. Take the opportunity to inspect this machine under power on-site and convince yourself of its good condition.

Condition: ready for operation (used), Functionality: fully functional, Weiler lever-operated lathe Iijlhewrft Hocdw Hsc About the machine: A used Weiler lever-operated lathe in good condition is offered. The machine is, of course, fully functional. Accessories as shown in the pictures. Take the opportunity to inspect this machine under power on-site and convince yourself of its good condition.