Used Lematec Drill for sale (4,828)

Condition: excellent (used), Deep hole drilling machine tools Gedjx Tp Ahspfx Adcsbn DEGEN - UTB MACH-ID 9188 Make: DEGEN Type: UTB Year: 2005

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Godpfx Adev A Uw Dscobn Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis 750 mm Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Spindle power 11 kW Speed 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: excellent (used), Year of construction: 1994, Arm Length: 1600mm Max. drill Ø cast: 60mm Max. tap Ø: 42M Stroke pinole: 310mm Max. distance spindle - table:1505mm Min. distance spindle - table:320mm Floor / table area: 1470x986mm Speeds / ranges: 2500Rpm Spindle Taper: 6ISO/Bt/Mk Quill Ø: 55mm Power: 4kW Gbjdpfx Adjx Sx D Sjcsn Length: 2900mm Width: 1200mm Height: 3200mm Weight: 4700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2006, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, Max. drill Ø steel: 5 - 40mm X - Travel: 1650mm Y - Travel: 1000mm W - Travel: 500mm Table size L x W / or ø:1200 x 1500mm Spindle taper: SK40Mk Gbsdpfxjwyup Ts Adcsn Speeds / ranges: 4200Rpm Length: 6500mm Width: 3800mm Height: 3400mm Weight: 6500kg

Condition: excellent (used), Year of construction: 2018, drilling depth: 1,250 mm, total length: 8,100 mm, total width: 6,300 mm, total height: 4,300 mm, workpiece weight (max.): 7,000 kg, overall weight: 31,000 kg, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 6,000 rpm, drill diameter: 36 mm, 4 side complete machining Swivel drilling and milling unit DCM Dynamic Collison Monitoring CAM model QCK (Quick Check Kinematics) Transfer bore cycle (380-382) 90 Bar IKZ Coolant system Extra ATC Tower 24 position (4 x 6) HSK 63 Double ballscrew construction Clear tank 1650 L and Waste tank 1300 L Chip conveyor Max. drill Ø steel: 36mm Godpfsvn Sv Usx Adcjbn Drilling depth: 1250mm X - Travel: 1600mm Y - Travel: 1250mm Z - Travel: 1100mm W - Travel: 1600mm Table load: 7000 Table size L x W / or ø:1500 x 1100mm Spindle taper: HSK-63Mk Power on spindle: 23kW Speeds/ranges: 6000rpm Length: 8100mm Width: 6300mm Height: 4300mm Weight: 31000kg

Condition: used, Year of construction: 2014, complete in standard configuration with: - Fully automatic electronic control with foot pedal for clamping-drilling-unclamping, electric jog operation, - Automatic return of the drilling unit after reaching the preset drilling depth - Automatic extension of drilling depth when end-grain drilling saves the need to adjust drilling depth from flat to end-grain drilling. (+10 mm, e.g. with dowel length 35 mm, drilling depth flat side 14 mm, drilling depth end-grain 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drill feed 0-70 mm) incl. 21 quick-change chucks (Ganner system) for easy bit changes. - Simple swiveling of the drilling unit from 0° to 90°, supported by gas cylinder. - 1 clamping beam, movable in Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop fence 1800 mm for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, with quick-change system, easily swappable from right to left for mirror-image shelf drilling in carcass constructions, also suitable for line boring in System 32. - Side stops and position settings, as well as drilling height position via support table using mechanical digital counters. - Side stops can be easily swiveled away, for the quickest changeover from carcass to frame and line boring. - Clamping arms for clamping beam designed for line boring positions up to max. 300 mm. - Ideal three-stage... Weight: approx. 400 kg gross, approx. 350 kg net. Dimensions (L x W x H): 1.35 m x 1.25 m x 1.40 m Equipment: 1 extraction hood, dust tested, ø 120 mm. 1 set for line boring in System 32 complete with: 1 base fence 1050 mm (aluminum profile 40x40 mm), 1 setting gauge for line boring. 1 frame dowel device complete with: 1 center stop, 1 round stop rod 850 mm long, 2 stops. Location: Nattheim. Gbedpoyyxkhjfx Adcon

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 102-20, Single head eyeletting machine for foot operation with automatic eyelet feed, Gbedpjwgw Ulefx Adcjn Available for an eyelet size with inner diameter of 4 mm or 5.5 mm, With self-punching eyelets: up to 20 sheets with 80 g/m2 paper or material thickness up to 2 mm

Condition: used, Working width 720 mm hollow max. 820 mm bore depth horizontal 120 mm Gjdpolfcn Eefx Adcjbn boring depth: vertikal 45 mm

Condition: used, Number of boring spindles 1 St. Motor output 1,1 kW Workpiece thickness ca. 100 mm Gbjdelfcnwjpfx Adcon Working width 650 mm Foot-operated drill machine Scheer type BM340

Condition: used, 300 x 37 cm Gjdpfx Ajlfcntodcjbn engine 1,6 kW weight 180 kg

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 74500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Gbjdpfx Aey Umklsdcon Machine for concrete pile drilling, soil improvement, and vibrocompaction. Carrier device Sennebogen SR25BT (manufactured in 2008) with drilling attachment Delmag RH18 (manufactured in 2009). Drill table stroke 12.50m, total height 19.91m. Outreach 3.165 - 4.00m. Feed winch, winch for feed with freewheel, auxiliary winch, rear platform. Drill table SHT25, THE KDK ROTARY DRILL HEAD BT180-2 IS NOT PRESENT, PURELY A SOIL IMPROVEMENT DEVICE, drilling gearbox MBDA 3500 ABI. With single auger. NO Kelly bar. Mast support cylinder, automatic alignment. Hydraulic telescopic undercarriage with a width from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at BH 3.304. Drills and drilling accessories are available separately. Also available is a mobile mixing plant, brand MAT, consisting of a mixing container (throughput capacity 20m3/h), conveyor screw, mixing tank (capacity 4,000l), and plunger pump with remote control. The condition of the machine corresponds to the value of the operating hours. At the time of inspection in 2023, the machine was running/functioning without any abnormalities. As of October 2024, storage damages have occurred to valves, control, and hydraulic hoses. It is not possible to operate the machine with 2 attachments at the same time. The machine shows wear and tear appropriate to its age, mileage, and purpose of use on pins and bushes as well as signs of use (dents, abrasions, etc.). The machine was not tested under load. The machine was used with 55 and 80 paddles. After service and maintenance of the storage damages, the device is ready for use. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40844 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, machine/vehicle number: 007841, X axis working area: 4200 mm Y axis working area: 1200 mm Working Table: Pod and Rail Gedpfeyg Ef Djx Adcjbn Main Electrospindle power: 18 KW Number of controlled axes: 4 axes Maximum edge height: 64 mm Total number of tool changer positions: 18

Condition: used, drilling capacity: 23 mm, Equipment: type plate available, Fast radial drilling machine – bench drilling machine Donau Werkzeugmaschinen DR23 radial drilling machine Serial number 2062-4 Operating voltage 380 volts with neutral conductor, 50 Hz, 3-phase Drilling capacity: up to approx. Ø 50 mm Speed range 58 - 1275 rpm Godewybqqepfx Adcsbn Threading device, overhang 920 mm Machine light Base plate, table size approx. 1100x400 mm Motor power approx. 1.5 kW, without coolant system 2 T-slots at the rear left Weight: approx. 1,200 kg The arm is pivotable, height-adjustable, and can be moved in length and depth. At the push of a button, the desired position can be achieved by pivoting, pulling, and pushing, and then fixed in place. An inspection while the machine is powered on is possible after prior appointment. All technical specifications are subject to printing errors and omissions. Price on request Sale exclusively to countries within the EU.

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 238828, Available: Immediately Gjdpfx Aspr Uvredcebn

Condition: excellent (used), Drilling machine, bench drill, pillar drill, column drill, box-type drill, tapping machine, threading machine -Machine: is in very good condition and runs very smoothly. -Manufacturer: HIW Helmerding, bench drill -Motor: 1.0/1.6 kW -Speeds: 95 - 1050 rpm, 8-stage -Feed rate: 0.08/0.16/0.28 1/rev. -Table size: 500 x 400 mm, travel distance 685 mm -Spindle mount: MK3 -Spindle stroke: 180 mm Gbsdshv S Etepfx Adcon -Protrusion: 280 mm -Dimensions: 1100/650/H2340 mm -Weight: 690 kg

Condition: good (used), Drilling machine, bench drill, pillar drill, column drill, box-type drill, tapping machine, threading machine -Manufacturer: Strands, MK3 bench drill with cross table Demanders Gbsdpsy Rx Egefx Adcen -Motor: 0.75/1.0 kW -Speeds: 100 - 30200 rpm, 8-stage forward/reverse rotation -Thread cutting device: via foot switch -Table size: 500 x 195 mm -Cross table travel: X360 mm Y160 mm Z440 mm -Spindle mount: MK3 -Spindle stroke: 135 mm -Protrusion: 255 mm -Dimensions: 780/800/H1540 mm -Weight: 218 kg

Condition: used, Year of construction: 2002, functionality: fully functional, spindle mount: MK 3, throat depth: 297 mm, overall weight: 680 kg, L.-No. 4.1-551 1 used Pillar Drilling Machine, Manufacturer: ALZMETALL, Model: AC 25, Year: 2002 Gjdpfx Asy Hik Sedcebn Height-adjustable drilling head, fixed table, coolant device. Technical details: Drilling capacity steel/cast iron: 25/30 mm Spindle taper: MK 3 Feed: 35-1400 rpm Spindle stroke: 120 mm Spindle-column overhang: 297 mm Tool fitting: MK3 Machine weight: 680 kg Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 1998, Frame dowel and slot mortising machine from Hofmann HT 200 U with angle adjustment Specialized drilling machine for stair construction, window manufacturing, and universal applications thanks to pneumatic height adjustment. Angled doweling and baluster/rail drilling are easily possible due to the swiveling drilling unit. Motor with pole-change switch, two speeds Motor output 1.5 / 1.8 kW, 1400 / 2800 rpm Motor can be started via a practical handle switch Precision drill chuck with two inserts: 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise workpiece positioning Drilling unit can be rotated 65 degrees to the left and right Gbsdpfoyfta Tsx Adcen Pneumatic adjustment of working height, allows doweling on two levels without repositioning Desired drilling heights for each drilling level can be set with a handwheel and digital counter; switching between levels is pneumatic and is operated from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, positionable at the front and back of the table 2 swiveling workpiece supports 2 side stops, can also be used as front support Mobile base Extraction port 80 mm 4 used but good drills: 9, 12, 16, 19 mm Few touch-ups on the paint, excellent condition, see original photos A used swiveling slot mortising machine in this condition is very rarely available. CE mark Operating manual Dimensions: approx. 1200 x 1200 x 1200 mm (LxWxH), weight 310 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration and available in our warehouse – see “more offers from this supplier.”

Condition: good (used), Year of construction: 2002, Drilling and Milling Machine Manufacturer: KNUTH Type: TBF 500 Year: 2002 with coordinate table Spindle taper: MK4 Godpfx Aey Spubodcsbn Spindle speeds: 125-2500 rpm Motor power: 1.1 kW Table travel: X 500 mm, Y 160 mm Max. installation height: 300 mm Spindle stroke: 130 mm Table size: 200 mm x 730 mm Machine dimensions: Width 1000 mm, Depth 800 mm, Height 1800 mm, Weight approx. 350 kg In good condition.

Condition: used, Year of construction: 2018, functionality: fully functional, - Year of manufacture: 2018 - Fully operational - Made in Poland - Operating manual, CE certificate included TECHNICAL SPECIFICATIONS: - Four drilling units - Suitable for drilling both long and short components - First drilling unit: five drills - Second drilling unit: five drills - Third drilling unit: five drills - Fourth drilling unit: six drills - Adjustable drilling units, right and left - Three horizontal pneumatic clamps - Three vertical pneumatic clamps - One centering pneumatic clamp Gsdpfxsw Iqdzj Adcebn - Motor rotation (right): 3000 rpm - Motor power: 5 kW - Spindle stroke: approx. 160 mm - Table height – working level: approx. 1000–1080 mm - Rated voltage: 3x400 V - Air pressure: 6 bar - Air consumption: 10 Nm3/h / 2m3/h Dimensions: - Length: 2300 mm - Width: 1700 mm - Height: 1500 mm - Weight: 750 kg

Condition: used, Year of construction: 1970, taper MK 4 feeds: ja weight of the machine ca. 1,5 t Gbjdpsxzu Dqefx Adcsn

Condition: good (used), Storage location: 3111 Manufacturer: IXION Year of manufacture: 1998 Type / Model: BT 15 Machine number: 186477 Drilling capacity: up to 16 mm Spindle mount: Drill chuck B16 Speed range: 480 to 3,800 rpm Table: 290 x 350 mm Overhang: 225 mm Gjdpfx Adjzcuzaecebn Stroke: 100 mm Head height adjustment: 300 mm Distance table-chuck: 70 to 370 mm Footprint: 290 x 440 mm Connection: 0.8/1.0 kW Accessories/Equipment: Drill chuck Condition: good Weight: Dimensions: 290 x 440 x 700 mm

Condition: good (used), Storage location: 3110 Manufacturer: MAXION Year of manufacture: 2006 Machine number: 186477 Gedozcuypspfx Adcjbn Type / Model: BT18STP Drilling capacity: 30 mm Thread cutting capacity: M25 Spindle mount: MK 2 Speed range: 120 to 2,160 rpm Overhang: 230 mm Vertical adjustment: 300 mm Table: 800 x 800 mm Clamping area: 300 x 330 mm Stroke: 120 mm Distance table to spindle nose: 120 to 440 mm Vertical adjustment: 320 mm Total power consumption: 1.3 kW Accessories / Equipment: Belt adjustment Condition: good Footprint: 800 x 800 mm Weight: 260 kg Dimensions: 800 x 950 x 900 mm

Condition: good (used), Stock No.: 3031 Manufacturer: Wörner Machine No.: 39135 Type / Model: B13 Drilling capacity: up to 10 mm Gbedpexfbaaofx Adcjn Spindle mount: MK2 B16x2 Speed range: 560 to 7,000 rpm Stroke: 120 mm Throat: 250 mm Table size: 330 x 430 mm Head adjustment: 400 mm Machine footprint: 430 x 650 mm Distance table to spindle nose min./max.: 80 / 480 mm Total connected load: kW Accessories/Equipment: drill chuck Condition: very good Weight: 165 kg Dimensions with table: 750 x 620 x 1,600 / 2,000 mm

Condition: excellent (used), functionality: fully functional, Deep Hole Drilling Unit / Deep Hole Drill Manufacturer: POREBA Type: Deep Hole Drilling Attachment / Drilling Rig Condition: Used, good technical condition Technical Data Feed stroke: up to 900 mm Weight: approx. 780 kg Electrically driven feed system Heavy-duty industrial construction Integrated control panel Complete unit with drive motors Description Offered for sale is a robust deep hole drilling unit manufactured by POREBA. The attachment is suitable for installation on large conventional lathes or special-purpose machine tools and features an electrically driven feed system with a travel of up to 900 mm. Its rigid construction provides excellent stability and precision during deep hole drilling operations. The unit is supplied complete with drive motors, control panel, and mounting components visible in the photographs. Advantages ✔ Heavy-duty industrial design ✔ Feed travel up to 900 mm Gedpfx Ajzcvuuedcsbn ✔ High rigidity and stability ✔ Electrically driven feed system ✔ Suitable for deep hole drilling applications ✔ Proven POREBA engineering Transport Approximate weight: 780 kg Loading assistance available