Used Drill Mill Machine for sale (91,890)

Condition: good (used), Year of construction: 2016, X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Hsdpfow Tc Hfex Aacjw Max. workpiece width: Max. workpiece height: Max. workpiece weight: Taper angle/height: Automatic Wire Feeding: Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Condition: used, Year of construction: 2003, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, FANUC ROBODRILL T21i DL CNC DRILL-TAP MACHINE MAKE FANUC, MADE IN JAPAN MODEL ROBODRILL T21i DL CONTROL FANUC 16I-MB YEAR 2003 TABLE SIZE 850.0 x 410.0 mm TRAVERSES X Y Z 700.0 x 400.0 x 330.0 mm SPINDLE SPEED 10 – 20,000 RPM Hjdpfx Ajtnh Aljacew ATC 21 STATIONS SPINDLE TRAPER ISO 30 RAPID TRAVERSE 54m/min DISTANCE BETWEEN SPINDLE NOSE TO TABLE 150.0 mm – 480.0 mm CUTTING FEEDRATE 1 – 30,000mm/min TOOL CHANGE TIME 1.6 sec MAX TOOL DIA 80.0 mm MAX TOOL LENGTH 200.0 mm MAX TOLL WEIGHT 2 kgs POWER RATING 5.5 Kw PLUS SWARF TRAY COOLANT SYSTEM SET OF TOOLING SET OF MANUALS

Condition: used, Year of construction: 1988, Manufacturer: Haacke Hodpsg Tvmbsfx Aacjw type: UW II A-CNC year of construction: 1988

 only for step drills up to max. Ø 30mm cross adjustment: 250mm height adjustment: 250mm grinding length: 400mm weight: 1,4t footprint: 2,5 x 1,2 x 1,9mm Application: for grinding steps on step drills Accessories:

 Paper belt filter make LKK Foreground flap collet chuck Forkardt Overz /BR 50/ LH-Z 24394

Condition: excellent (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, The grinding machine was purchased by us in 2022 and was in operation for five months. Hsdpfexrkqhjx Aacjw This grinding machine greatly helped us to be independent from external service providers. The deep hole drills could now be quickly re-sharpened in-house, which also saved us a lot of money. The necessary grinding wheels, some of them new, are included in the delivery.

Condition: good (used), Grinding diameter 3-40mm Length of drill unlimited Point angle 40-180mm Point thinning device Hjdpfx Aasgy Ti Decow Dressing attachment MARCELS MASCHINEN CH

Condition: new, grinding range 8 - 32 mm sharp cornered angle min./max. 90 - 140 Grad connected load 230 V weight of the machine ca. 16 Kg dimensions of the machine ca. 0,43 x 0,24 x 0,24 m Drill grinding machine: Additional station for grinding back the drilling cutting surface (clearance angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Hard metals with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Vibration-free running thanks to its heavy weight and rubber feet. Sharpening angle adjustable for all common twist drills. Package dimensions: 430 x 240 x 240mm. Hsdpoupxh Nofx Aacsw Weight 16kg.

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Hjdpfx Aor D T U Djacjw Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side Hedpfx Aaoif Az Ujcew - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)

Year of construction: 1987, condition: not inspected (used), Chuck for workpiece pickup is missing Hodpohaqv Dofx Aacow

Condition: good (used), Year of construction: 2015, operating hours: 3,000 h, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 300 kg, table width: 400 mm, overall weight: 870 kg, table length: 300 mm, Electrode diameter 0.1 - 3 mm Electrodes available in brass, copper, or carbide Suitable for starter hole drilling in steel, aluminum, hard metal for wire EDM or for precise, deep, narrow boreholes Manual or CNC-controlled programming cycle Approach cycles Includes pump and collection tank on castors Includes drill chuck and seal for 1.5 mm electrodes Hjdpfx Aaew Dqdnscew Machine can be inspected or tested under power at any time.

Condition: excellent (used), For sale: Complete Waldmann & Weigl ER-220 electrical discharge machine, designed for precise removal of broken drills, taps, and cutting tools. Professional workshop solution from Germany, ideal for toolrooms, service shops, and mechanical workshops. • Manufacturer: Waldmann & Weigl GmbH, Germany • Model: ER-220 • Power supply: 220 V / 50 Hz • Working current: 1.5 A • Electrode range: from Ø1.0 mm to Ø10 mm (copper, tubular) • 6-stage erosion voltage adjustment (from gentle to intensive burning) • Electrode holder with height adjustment • Cooling pump with water tank • Control panel with operating mode selection • Complete documentation in German (original manual) • All components mounted on a mobile workshop table with castors. The machine is fully operational, complete, and ready for use. Indispensable for fast and safe removal of broken tools from workpieces without risk of damaging the component. Hsdpfew Syyyjx Aacew

Condition: new, grinding range 2 - 20 mm sharp cornered angle min./max. 90 - 135 Grad connected load 230 V weight of the machine ca. 8,6 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m Hsdjupxkwjpfx Aacjw

Condition: used, Column drilling machine INFRATIREA - ORADEA Type PH - 031 Serial no. Year of manufacture 1975 Drilling capacity 40 mm Spindle taper MK 4 – short quill Throat 320 mm Quill stroke 250 mm Table size 400 x 400 mm Column diameter 160 mm Spindle speed 85 – 1500 rpm, 6 gear stages Motor output 2.2 kW Power supply 400 Volt, 50 Hz - Spindle speed via 6 gearbox stages - Right and left-hand rotation - Automatic feed 0.10 – 0.16 – 0.25 – 0.4 mm/rev - Swiveling drilling table - Table height adjustment via hand crank - Clamping surface on machine base Hodjtrpifjpfx Aacew - Coolant pump in machine base Required space L x W x H 1000 x 600 x 2450 mm Weight 700 kg Good condition

Condition: new, Year of construction: 2025, Standard equipment: Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob EMERGENCY STOP button Thermal overload protection Spindle stop Drill protection with electric. Protection Connection cable with Schuko plug 3-year guarantee for single-shift operationContinuous/normal drilling performance (mm) 6/8 (in E335/ST60) Thread cutting performance (depending on pitch) M5 Spindle B12 drilling depth (mm) 60 Thrust (mm) 220 Column diameter (mm) 70 Usable work surface (W x L) (mm) 300 x 250 T-slot size (arm), distance (mm), width dimension (mm) Cross grooves, number 2, 14/26 Drill head height adjustment by hand Feed (mm/revolution) by hand Drill depth stop stop ring (positive locking) Drill depth display digital Speed display digital Motor three-phase - frequency-controlled, mains connection 230 V (kW) 0.54 Spindle speeds continuously variable (1/min) 100 – 10000 Spindle/work surface (mm) 140 – 315 Machine dimensions with packaging (mm) 452 x 700 x 1,130 Machine dimensions without packaging (mm) 320 x 520 x 820 Weight (kg) 44 Optional accessories: Precision keyless chuck for Turbo Dril (0.5-6 mm), B 12: €160 Factory guarantee: 3 years Free delivery including packaging (Germany only) Hodpfxsvupt De Aacow NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: ready for operation (used), machine/vehicle number: 153556, drilling capacity: in St 60 6 mm spindle taper: B 12 MK throat: 165 mm table size: 290 x 300 mm spindle turning speed range: 400 - 4000 rpm Hodpsfnbgljfx Aacew engine: 380 V, 0,34 kW space needed: 450 x 300 x 680 mm weight: ca. 50 kg

Year of construction: 1992, condition: good (used), machine/vehicle number: 92-2083, Twist drill grinding machine Offer number: 20063 Make: SCHANBACHER Type: S 3-50 machine no.: 92-2083 Year of construction: 1992 Technical data: - simple service - Grinding process by means of gear motor - Twist drill dimensions 3 - 50 mm - acute angle 90 - 140 ° - adjustable clearance angle - grinding motor 400 V / 0,25 kW - Geared motor for swivel movement 400 V / 0.12 kW - Grinding wheel dimensions - 175 x 22 x 20/90 x 20 mm Hedpfx Aofhy N Seacjw - Space requirement approx. W 810 x D 570 x H 1260 mm - Weight approx. 120 kg - with - Clamping device - Presetting device

Condition: new, Year of construction: 2025, Portable Centere Drill Machine, weight 18 kgs for perfect center according DIN 333 Motor 220V, 1300W, Speed 0-2600 rpm stepless Hodpfxebc Sa Dj Aacow Standard clamping range Ø 30 - 250 mm Optional jaws for Ø 250-500 mm / Ø 500-750 mm

Condition: new, grinding range 3 -28 mm angle adjustable from - to horizontal 0-180 Grad angle adjustable from - to vertikal 0-45 Grad angle adjustable from - to negativ 0-52 Grad clamping range 3 - 28mm mm 0 5200 U/min connected load 230 / 250 Volt / Watt wheel diameter 100 x 50 x 20 mm weight of the machine ca. 45 Kg dimensions 0,5 x 0,4 x 0,4 m This grinder is ideal for regrinding tools such as end mills, drills, TIG welding needles and much more. comes standard with: Lathe tool accessories Drill accessories Accessories for milling Hsdpevn U Adofx Aacew 5C spring collet (4-6-8-10-12 mm) Clutch key 38-42 Grinding wheel wrench Allen key M3-M8 screwdriver Diamond grinding disc Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond pen Spring collet: 3/16" - 5/16" - 3/8" - 1/2"

Condition: excellent (used), Year of construction: 1999, Drilling capacity (steel): 18mm Drilling capacity (cast): 23mm Thread cutting (steel): M14mm Hedpfx Askytxzeacew Spindle holder: MK 2 Spindle stroke: 100mm Extension: 250mm Column diameter: 90mm Power: 0.55 kW Spindle speed: 125 – 2400 RPM / 225 – 4300 RPM

Condition: new, The machine does not include a stand. The BF3 Deluxe stand is available separately under item no. 56-1017. Technical specifications: Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. cutter head diameter: 80 mm Throat: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle mount: MT4 Quill stroke: 120 mm Quill feed: (3) 0.10 / 0.18 / 0.26 mm / rev Table size: 800 x 240 mm Hedsv N Uyrjpfx Aacew Travel (x / y): 555 x 205 mm Milling head tilting: -60° to +60° Distance spindle to table: 95 - 485 mm Milling head height adjustment: 390 mm T-slot size: 14 mm Lifting motor: 90 W Motor power output S1 100%: 1.1 / 1.5 kW (400 V) Motor - Input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions: 1140 x 970 x 1460 mm Approx. weight: 322 kg Scope of delivery: - 3-axis digital readout ES-12 V with LCD display - Keyless drill chuck 3 - 16 mm / B 16 - Drill chuck arbor MT 4 / B 16 - Drawbar spindle M 16 - Reducing sleeve MT 4 / 3 - Combined milling arbor MT 4 / 27 mm - Height-adjustable protective cover - Automatic spindle sleeve feed - Lifting motor for milling head - LED machine light - Digital spindle sleeve stroke display - Thread cutting device - Lamellar protective cover - Longitudinal measuring scale - Operating tools Without base frame

Condition: ready for operation (used), machine/vehicle number: 331/43, drilling capacity: 3 mm throat: 100 mm spindle turning speed range: 6300/9000 rpm Hedpofnbgqefx Aacsw engine: 380 V, 0,18 kW space needed: 470 x 250 x 520 mm weight: 39 kg

Condition: used, Year of construction: 1996, drill diameter 3 - 50 mm drilling length 500 mm lip angle 90 - 140 ° voltage 380 V weight of the machine ca. 120 kg dimensions of the machine ca. 0,80 x 0,60 x 1,30 m Serial-No.: 76658 Hodep Raizspfx Aacjw

Condition: excellent (used), Description to follow! Hodow U U Ikjpfx Aacsw

Condition: new, grinding range 2 - 13 mm sharp cornered angle min./max. 90 - 140 Grad connected load 230 V Hedpfx Asupxdqeacsw weight of the machine ca. 10 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: used, Table Drilling and Thread Cutting Machine IXION Type BT 15 GL Machine no.: Year of manufacture approx. 1975 Drilling capacity: 15 mm Spindle mount: Taper B 16 Thread cutting range: M 2.5 to M10 Throat depth: 200 mm Quill stroke: 90 mm Table size: 285 x 220 mm Column diameter: Ø 75 mm Spindle speed: 320–1600 rpm, 4 steps Motor power: 0.55 kW Power connection: 380 Volt, 50 Hz - Spindle speed adjustable in 4 belt stages Hodpfxowk Nxqo Aacow - Equipped with FAHRION GH 10 tapping attachment - With thread pitch guide bush, operation without guide bush also possible - Drill head height adjustment via hand crank - Column lowers from table plate for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition