Used Lifepak 15 for sale (15,348)

Condition: like new (used), Year of construction: 2015, operating hours: 12,022 h, functionality: fully functional, Almig screw compressor, as new condition Year of manufacture: 2015 with approximately 12,000 operating hours 15 kW, 10 bar, with 1.98 m³/min free air delivery Giedpfew A Sb Sox Agpet

Condition: new, Year of construction: 2023, operating hours: 1 h, functionality: fully functional, overall weight: 5,200 kg, fuel type: diesel, color: beige, power: 513 kW (697.49 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 408 kW (554.72 HP), nominal power (apparent): 510 kVA, continuous power: 368 kW (500.34 HP), total length: 4,460 mm, total width: 1,606 mm, total height: 2,493 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Doosan, type of cooling: water, AVS diesel generator set - stationary Type: DW 460 DO2 15 AK14A PRP output: 368 kW / 460 kVA ESP output: 408 kW / 510 kVA Giedeua Tl Ajpfx Agpjt Operating hours: 1 Engine: DOOSAN DP158LC Power standby: 513 kW Speed: 1,500 rpm Operating voltage: 24 V Cooling: water-cooled Generator: Mecc Alte ECO 40-3S/4 B Voltage: 400/231 V Voltage regulator: DER-1/A Control panel: DSE 7320 - automatic emergency power supply Dimensions: 4460 x 1606 x 2493 mm (LxWxH) Weight: 5200 kg Equipment: Battery charger 5 Amper, battery disconnect switch

Condition: excellent (used), functionality: fully functional, power: 97 kW (131.88 HP), fuel type: diesel, Year of construction: 2016, operating hours: 4,710 h, Screening area lower deck: 1,525 x 4,575 mm (W x L) Hopper volume: 8 m³ Transport weight: 33,000 kg Transport dimensions: 15,330 x 2,900 x 3,395 mm (L x W x H) Screening area upper deck: 1,525 x 4,880 mm (W x L) Powerpack CAT C4.4 Emission Stage IIIB: Power 97.9 kW Fine material discharge conveyor (dimension / discharge height): 900 x 7,600 mm / 3,810 mm Oversize material discharge conveyor (dimensions / discharge height): 1,400 x 5,500 mm / 3,600 mm Medium fraction discharge conveyor (dimensions / discharge height): 900 x 7,600 mm / 3,360 mm Feeding capacity: up to approx. 400 t/h Feeding height: 3,580 mm Maximum feed size: 400 mm Gisdpewxcwiefx Agpjt Drive concept: diesel-hydraulic Screening principle: double deck screen machine

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust SC 15 abrasion-resistant -Tire size: 5.00-8/3.00 111 A5 SC 15 RIM 3.00D-8 -Quantity: 1 piece available -Dimensions: Ø 460 x 130 mm Gijdpfxeyx Dxbe Agpjt -Weight: 17 kg

Condition: used, Year of construction: 2014, 2014 Citizen M32-Vlll 15 Axis CNC Sliding Headstock Automatic Lathe With Iemca Boss 338-HD/R 37LL Barfeeder - With Cool Blaster CB510 high Pressure Coolant System, Tooling In Machine, Parts Catcher, Absolent A.mist10S Mist Extraction Unit, Nobel Fire Suppression Unit, Signal Tower & Manuals. Iemca Boss 338-HD 37LL Bar Feeder Length 4,600mm, S/No. 021522NA06 (2015). Gisdpjyx H A Nsfx Agpjt Max Machining Ø32mm. Max Machining Length 320mm(1/Chucking) . Max Front Drilling Ø12mm. Max Front Tapping M10. Through Spindle Ø36mm. Max Main Spindle Speed ​​8,000rpm (Motor 3.7/7.5kW). Max. Drilling Diameter For The Gang Rotary Tool Ø8mm. Max. Tapping Diameter For The Gang Rotary Tool M6. Spindle Speed Of The Gang Rotary Tool 6,000rpm (1kW Motor). Max. Drilling Diameter For The Turret Rotary Tool Ø10mm. Max. Tapping Diameter For The Turret Rotary Tool M8. Spindle Speed Of The Turret Rotary Tool 6,000rpm (0.75/1.5kW Motor). Max. Drilling Diameter For The Back Spindle Ø10mm. Max. Tapping Diameter For The Back Spindle M10. Back Spindle Speed 8,000rpm (2.2/3.7kW Motor). Max. Drilling Diameter For The Back Tool Post Rotary Tool Ø8mm. Max. Tapping Diameter For The Back Tool Post Rotary Tool M6. Spindle Speed Of The Back Tool Post Rotary Tool (1kW Motor). Max. Chuck Diameter Of The Back Spindle Ø32mm. Max. Protrusion Length Of The Back Spindle Workpiece 65mm. Max. Protrusion Length 145mm. Number Of Tools To Be Mounted 31+ α. Gang Tool Post 5. Gang Rotary Tool 4. Gang B Axis Rotary Tool 3. Number Of Turret Station 10. Back Tool Post 9. Tool Dimension Tool (Gang Tool Post) 16 x 16mm. Sleeve φ25.4mm. Chuck And Bushing Main Spindle Collet Chuck FC081-M, Back Spindle Collet Chuck FC081-M-K, Guide Bushing FG531-M. Rapid Feed Rate All Axes (Except ‘X2 & Y2’) 32m/min, ‘X2’ Axis 18m/min, ‘Y2’ Axis 8m/min, ‘Y3’ Axis 32m/min. Centre Height 1,150mm. Input Power Capacity 20kVA. Weight 3,650kg. S/No.P30498 (2014).

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 837 h, load capacity: 1,500 kg, lifting height: 4,320 mm, fuel type: electric, mast type: triplex, construction height: 1,980 mm, drive type: Elektro, Electric 3-wheel forklift Load centre: 500 Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Front tyre type: Superelastic Rear tyre type: Superelastic Battery voltage: 48V Gjdoyul Aljpfx Agpoit Sideshift, 3rd valve, 3-wheel,

Condition: like new (used), Year of construction: 2022, Immediately available, 12-month warranty, excellent condition Recirculating oven for solvent-based materials according to DIN EN 1539, available with 4 loading trolleys - Max. temperature 150°C (can be increased upon request) - Usable volume: 1,875 liters - Internal dimensions: W 1250 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Loading tracks, recesses for feeding the oven with a loading trolley - Maximum permitted quantity of flammable substances at 150°C: 83.9 g - Minimum exhaust air flow at 20°C: 360 m³/h - KS Regler 40-1 controller for simple temperature regulation with pre-set ramp or hold times (1 program, 4 segments) - Controller features self-optimization and up to 3 process outputs - Additionally, a simple timer is integrated, operable via front buttons - Electrical connection: 30 kVA, 3 x 400 V, 57 A, 50 Hz - Heating capacity: 36 kW - Net weight: 820 kg - Only available with 4 loading trolleys, each with 12 trays and 24 stainless steel shelf levels Gsdpfx Agoxbtvfjpjit - Documentation, CE declaration - Electrically tested and supplied with the latest DGUV test protocol Inspection possible at our warehouse by appointment. Oven, ovens, drying oven, kiln, heat oven, heat cabinet, industrial oven, solvent oven, tempering oven, preheating oven, temperature oven, drying cabinet, chamber oven, curing oven, recirculating drying cabinet, recirculating oven, paint dryer

Condition: used, No. 3264 Complete sawmill Möhringer / Paul Used, still connected to power until 30.06.26 Consisting of: - Log crosscut table with driven tapered rollers Length measurement Hecht with remote-controlled photoelectric sensors - 1 cross conveyor to the frame saw, 7000 x 5500 mm LW Cam chains in mint condition - 1 cross conveyor, 3800 x 4000 mm LW - 1 roller conveyor in front of the frame saw, length 12400 mm, roller width 1400 mm With hydraulic lowering and lifting for sawn timber, cross-discharge with 2 flap gates - Quick-clamping frame carriage EWD with auxiliary carriage - 1 auxiliary conveyor for log feeding in front of the frame - Root reducer Möhringer - Frame saw Möhringer B 75-55 Multi-BV, year of construction 1994 Passage 700 mm, stroke 550 mm, saw blades hydraulically adjustable, conveyor belt, log loading device with adjustable laser, round timber measurement Hecht, clamps Jansen, hooks, 60 saw blades, adjustment gauge - Powered splitting wedge with chain bed Möhringer 230-292, year of construction 1994 With pre-cutting, photoelectric sensors, and laser for adjustment - 1 roller conveyor 4000 x 1400 mm LW, with grooved rollers, cross-feed with pneumatic cylinders - 1 S-conveyor with storage 3500 x 4000 mm LW, flights Albert made of square tube - 1 S-conveyor 3000 x 5500 mm LW, motor with adjustable slip clutch, function monitoring, drive elements made of angle iron - 1 under-table cross-cut saw Paul 15 AO, year of construction 1992 - 1 double edger Paul KME 2 / 750 R, year of construction 1988 With splinter separator, right-hand side unit electrically adjustable, through-feed cross-cut unit, length sorting system, preselection programs Österle - 1 conveyor belt 7400 x 400 mm LW - 1 conveyor belt 4000 x 400 mm LW - 1 conveyor belt 3000 x 500 mm LW - 1 trough conveyor approx. 6500 x 500 mm LW, ascending, for sawdust - 1 trough conveyor HOLTEC approx. 6500 x 500 mm LW, ascending, for wood chips - 1 trough conveyor HOLTEC, horizontal, with left and right rotation as a distributor over the boxes - Drum chipper HAAS, feed width 600 mm, feed height 150 mm, with vibrating chute - Frame saw sharpening machine OPL - Saw blade tooth setting machine VOLLMER GSA, year of construction 1996 - Frame saw sharpening machine VOLLMER (needs minor repairs, push cylinder bent) Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Godpfx Agoyzr Tfspoit Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: like new (used), Year of construction: 2018, operating hours: 7,500 h, We are selling our Multilift V 15KG with only 7,500 operating hours. The machine can be inspected/tested; original purchase price was €59,000! Technical Specifications: Z-axis (crosswise to the machine longitudinal axis) Stroke: 1,600 mm Max. speed: 3.0 m/s X-axis (parallel to the machine longitudinal axis) Giedpfx Agoy Emm Uopot Stroke: 900 mm Max. speed: 2.0 m/s Y-axis (vertical/plunge axis) Stroke: 1,000 mm C-axis (for gripper rotation) - Swing range 0° / 90°, both end positions monitored and manually adjustable - Pneumatic drive, including valve control - Max. torque at 6 bar: 28 Nm - Weight: 2.6 kg First vacuum unit (Venturi principle) with air saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, vacuum programmable, integrated condition monitoring for early detection of leaks and wear, routed close to the gripper; Customer-side hose connection: push-in fitting for hose size OD 6 / ID 4 Second vacuum unit (Venturi principle) with air saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, vacuum programmable, integrated condition monitoring for early detection of leaks and wear, routed close to the gripper; Customer-side hose connection: push-in fitting for hose size OD 6 / ID 4 Third vacuum unit (Venturi principle) with air saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, vacuum programmable, integrated condition monitoring for early detection of leaks and wear, routed close to the gripper Fourth vacuum unit (Venturi principle) with air saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, vacuum programmable, integrated condition monitoring for early detection of leaks and wear, routed close to the gripper; Customer-side hose connection: push-in fitting for hose size OD 6 / ID 4 Tenth pneumatic valve 5/3 with locked center position for gripper functions, piped to the gripper flange with quick-release couplings DN 2.7 for hose size OD 6 / ID 4; customer-side hose connection 8 freely programmable inputs for querying 8 gripper-mounted sensors, pre-wired to the gripper flange with a 25-pin connector; up to 8 sensors can be monitored; the corresponding mating connector for the gripper-side connection is included Second interface for querying 8 additional sensors, via 25-pin connector on the gripper flange, incl. mating connector for gripper-side connection Third interface for querying 8 additional sensors, via 25-pin connector on the gripper flange, incl. mating connector for gripper-side connection Fourth interface for querying 8 additional sensors, via 25-pin connector on the gripper flange, incl. mating connector for gripper-side connection Interface with 4 freely programmable inputs and outputs, non-isolated, on a 42-pin socket on the MULTILIFT, for peripheral devices Additional interface with 16 freely programmable inputs and outputs (24V DC), non-isolated, wired to a 72-pin socket on the MULTILIFT Push-in fitting for hose size OD 6 / ID 4

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 1578, turning length: 600 mm, travel distance X-axis: 150 mm, travel distance Z-axis: 350 mm, total height: 2,000 mm, total length: 4,000 mm, total width: 2,000 mm, overall weight: 5,000 kg, controller manufacturer: MORI SEIKI, controller model: MORIC-T 6 F, number of slots in tool magazine: 10, Equipment: chip conveyor, MORI SEIKI SL-15 CNC Lathe The machine is equipped with a tailstock, a 10-position turret, and a three-jaw chuck (diameter: 160 mm), as well as a chip conveyor. Note: The item must be collected definitively between 07 and 09 July 2026 on a date to be mutually agreed upon. Gedpfxey Dcm Ij Agpeit FCA D-71263 Weil der Stadt – loaded onto truck.

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 15 abrasion-resistant -Tire size: 200/50-10/ 6.50 SC 15 RIM 6.50 F-10 Giedpfeyxnpdsx Agpet -Quantity: 12 pieces available -Price: per piece -Dimensions: Ø 450 x 200 mm -Weight: 23 kg/pc.

Condition: good (used), Tires, solid rubber tires, forklift tires Giedpfxjyxnbaj Agpet -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 15 -Tire size: 200/50-10/ 6.50 SC 15 RIM 6.50 F-10 -Quantity: 24 pieces available -Price: per piece -Dimensions: Ø 450 x 200 mm -Weight: 23 kg/pc.

Condition: new, Dimensions with base frame: approx. 1500 mm x 1400 mm Feed speed: 27 m/min Gisdpfxjyr Tu Ro Agpjt Rotor blades: 2 Stator blades: 1 Infeed cross-section: approx. 10 x 40 mm Drive motor: 1.5 kW Weight with base frame = approx. 270 kg

Condition: used, Year of construction: 2010, machine/vehicle number: MR006632, Used extraction unit, based on negative pressure system. The extraction unit is ready for use, price ex Staphorst. Technical specifications: - Extraction nozzle diameter: 300 mm Gedpfjwwtwwex Agpeit - Extraction capacity: 5,990 m3/h - Length: 3,100 mm - Width: 1,150 mm - Height: 2,950 mm - Motor power: 10 HP - Serial number: 1017

Condition: refurbished (used), 1 x Elektronic Motor Braking Unit Power range 3 - 15KW Gedpfsyvhftex Agpoit Voltage range 200-575V Power frequency 50Hz/60Hz Siemens EMG 15

Condition: used, Year of construction: 2003, pressure 50 t chamfer lenght 1550 mm distance between columns 1150 mm Control CYBELEC DNC 1200 PS Eco column arm 405 mm table height 900 mm stroke of ram 400 mm distance between table / ram 720 mm total power requirement 9,5 kW weight of the machine ca. 5.200 kg Gijdpfx Agey D T Tlepst dimensions of the machine ca. 2000x1900x2920 mm Accessories/Equipment: - CYBELEC DNC 1200 PS Eco controller - 2 support arms - 4 stop fingers - Lasersafe - Foot switch

Condition: new, mileage: 300 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, emission class: euro6, color: white, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, * Mercedes Sprinter 517 Low-floor * Immediately available * 15 seats * 27 standing places * 1 wheelchair space * Perm. gross weight 7000KG * Wheelchair space * Automatic transmission * Cruise control * Multifunction steering wheel * Driver's air conditioning * Driver's air suspension seat * Webasto roof air conditioning Gisdpfjy D U Siox Agpjt * Ventilation system * Passenger compartment convector heating * LED lighting, white and blue * USB charging stations in passenger area * Grab rails * Stop buttons * Wheelchair ramp * Reversing camera * Anti-slip floor * Electric swing doors * Folding seats * Assistance systems * Destination display pre-installation * Roof hatch * Financing available * Trade-in possible * Sale subject to prior sale, errors, and change

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 28450 € 543.4 € 1550 mm 7 mm 7 mm Godpoyb Szhefx Agpeit 4.5 mm 4.5 mm 3.5 mm 150 mm 150 mm 130 mm 1,5 / 6 m/min 4 kW 3750 mm 960 mm 1100 mm 2500 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: (time of deliver with options approx. 10 weeks) Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, sheet width 1600 mm plate thickness 6 mm pre-bending 4 mm upper roll diameter 140 mm lower roll diameter 140 mm side roll diameter 120 mm min. bending diameter Oberwalzen-Ø x 3 total power requirement 3 kW weight of the machine ca. 2.000 kg Overall size 3700x1300x1280 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction Gijdpfx Agsyv N E Uopot - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: used, used, top condition Machine cleaned and lubricated Partially overhauled. Emergency stop button renewed. All sliding pads replaced Motor cover repaired. Oscillation overhauled and adjusted. Test run conducted Manufacturer: SCM Samco Model: Unilev 15 Machine No.: 98510909050 Motor: 2.2 / 3 kW Oscillation: pneumatic, infinitely variable Veneer edge sanding unit Front table approx. 1400 x 220 mm Rear table approx. 1440 x 220 mm Tilting table double-sided Belt tension pneumatic Belt length 2170 mm Belt width 150 mm 2 belt speeds: 10 / 20 m/sec mobile Round edge sanding device Giedpfx Asy H N Tmsgpet with support table approx. 500 x 400 mm Extraction connection D 120 mm Required space approx. 1500 x 750 x 1400 mm Weight approx. 490 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: new, Year of construction: 2025, A laser marker that can operate anything? Indeed! This is the Wattsan UV TT, an ultraviolet marker that works with a variety of materials, including leather, ceramics, glass, rubber, wood, leather, fabric, gems, organic and electrical components. The Wattsan UV TT is suitable for QR-codes, bar-codes, data and time, and any other images. This marker can operate big workpieces; the scanning tripod can be taken off and placed on the deck. Additionally, you may alter the machine's functionality by just switching out the lenses! You can give our managers a call for additional details! Wattsan UV TT machine characteristics: Working area: from 75x75 to 300x300 mm Laser power: 3/5/10/15 W Machine size: 880x420x1000 mm Packing size: 960x500x1100 mm Weight: 82 kg Laser sourse: JPT Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Gedpfxer D Ngts Agpoit Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 20 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: excellent (used), Year of construction: 2006, overall weight: 403 kg, fuel tank capacity: 500 l, volume flow: 2.58 m³/h, operating pressure: 10 bar, pressure (max.): 7.5 bar, input voltage: 400 V, ATLAS COPCO GA 15 ff screw compressor Mounted on 500 l pressure vessel With refrigerated dryer 15 kW motor Capacity 2.58 m3/min Gsdpfsy R Sf Tex Agpsit Pressure 7.5 bar

Condition: good (used), Year of construction: 2016, fuel type: electric, Weights Empty weight: 7.300 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.500 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 850 m Max swing of platform in degrees: 350 Transport dimensions (LxWxH): 6,95x1,49x1,98 Production country: FR Additional information Please contact Christian Theißen for more information Manufacturer: Haulotte Model: HA15IP Year of build: 2016 Condition: Used Data: Max. working height: 15,00 m Movable up to working height: 15,00 m Platform height: 13,00 m Godpfsyxf A Usx Agpsit Max. reach: 8,50 m Platform lifting capacity: 230 kg Platform dimensions LxW: 1,20 x 0,75 m Swivel range: 350° Gradeability: 25% Total dimensions LxWxH: 6,95 x 1,49 x 1,98 m Ground clearance: 0,15 m Overhang: 0,13 m Drive type: Battery Empty weight: 7.300 kg Special features: Rotatable work basket, basket arm rotation angle +/- 70°, white tires, advantage: high lateral reach.

Condition: ready for operation (used), * Brand: Haver & Böcker * Dim. screen: 4000 x 1500 mm – 2 decks Gjdpfx Aeywnfvsgpeit * Incl.: E-motor and springs.

Condition: ready for operation (used), * Surface: 6000 x 1500 mm - 2 Deck * Screen opening Upper Deck: [] 35 mm * Screen opening Lower Deck: [] 20 mm Gsdpfx Ageywnb Rjpjit * Driving: E-motor 11 kW