Used Lifepak 300 for sale (12,925)

Condition: good (used), Year of construction: 2016, cutting diameter 300 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: flat re 300 x 280 mm capacity 45 degrees: round re 300 mm capacity 60 degrees: flat re 190 x 200 mm capacity 60 degrees: round re 200 mm capacity 45 degrees: flat li 270 x 200 mm capacity 45 degrees: round li 270 mm turning speed range: 20 - 100 m/min saw band length 3660 x 27 x 0.9 mm power capacity 2.4 kW weight of the machine ca. 650 kg range L-W-H 2050 x 1170 x 1600 mm Current list price: approx. 15.000 euros Special price available upon request Features: - Semi-automatic electro-hydraulic band saw (INDUSTRIE) - Suitable for single-piece and small-batch production - Large, ball-bearing-mounted cast-iron turntable * For miter cuts from 45° left to 60° right Nodpfx Aajzv Ul Dezowl - Hydraulic feed mechanism Material clamping - Ergonomic control panelâ??front right, swiveling - Coolant system - Operatoration manual * Semi-automatic work cycle: After the cycle starts, the vise closes automatically, the saw frame lowers for the cut and automatically raises back to the predefined starting position once the cut is complete. Afterward, the vise opens.

Condition: excellent (used), Viessmann Vitoplex 300/720 kW/low-temperature/heating boiler/available with oil or gas burner upon request Nwedpfexv Exbex Aazel

Condition: excellent (used), METTLER TOLEDO TGA/DSC 3+ Thermal Analysis System Manufacturer: METTLER TOLEDO Type: TGA/DSC 3+ Machine Type: Thermal Analysis System / TGA-DSC / Simultaneous Thermal Analysis Techniques: TGA / DSC / DTA / SDTA For sale is a used METTLER TOLEDO TGA/DSC 3+ thermal analysis system with STARe software, PC system, and Huber Minichiller 300-H OLÉ. The system is suitable for simultaneous thermogravimetric and calorimetric analysis, for investigating mass changes and thermal effects, as well as for material testing, research, development, and quality assurance. Technical Data: Temperature range: approx. 22 °C to 1,600 °C Sampling rate: up to 10 data points/s Sensor output: mass and heat flow Heating rate: approx. 2 to 250 K/min Cooling rate: approx. 0.02 to 50 K/min Weighing range depending on the balance configuration: up to 5 g Resolution depending on the balance type: up to 0.1 µg Integrated gas flow control Sensor options: DSC / DTA / SDTA Software / PC: METTLER TOLEDO STARe software version 16.30 incl. USB dongle PC system with monitor, keyboard, and mouse Adjustment data / system documents as shown in the pictures Huber Minichiller 300-H OLÉ: Temperature range: -20 °C to +100 °C Temperature sensor: Pt100 Heating power at 230 V: 1 kW Cooling capacity at 15 °C: 0.3 kW Cooling capacity at 0 °C: 0.2 kW Cooling capacity at -10 °C: 0.14 kW Cooling capacity at -20 °C: 0.07 kW Refrigerant: R290 Refrigerant quantity: 0.041 kg Max. flow rate: 14 l/min Max. flow pressure: 0.25 bar Mains connection: 220–240 V / 50–60 Hz Max. current draw: 6.5 A Dimensions / Weight: TGA/DSC 3+ depending on the configuration: Standard: approx. 460 × 630 × 320 mm, approx. 29 kg With SmartSens terminal: approx. 460 × 630 × 450 mm, approx. 30 kg With terminal and sample robot: approx. 460 × 630 × 630 mm, approx. 34 kg Huber Minichiller: 225 × 360 × 380 mm (W × D × H) Net weight: 25 kg Nwjdpfx Aaez Ep Ngezol Equipment: TGA/DSC 3+ STARe software version 16.30 PC system with monitor, keyboard, and mouse Huber Minichiller 300-H OLÉ Gas connections Touch operating unit Accessories and sample sets Adjustment data Documentation Accessories as shown in the pictures Scope of delivery: 1 × METTLER TOLEDO TGA/DSC 3+ 1 × Huber Minichiller 300-H OLÉ PC system with monitor, keyboard, and mouse STARe software version 16.30 USB dongle Operating unit Documentation and accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Service markings and nameplates are present. Shipping or freight transport is possible. Subject to changes, errors and prior sale.

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, We have a Buhrs W+D BB300 10K, 6 stations envelope inserting system with camerasystem available. DL up to C4 envelopes. This machine is built in 2013. This system is ready after completing our full maintenance programm. This machine is therefore ready for a demo! Year of built 2013 6 station base Nodpfx Aozv Trcjazswl Configuration: Buhrs BB300 - 10K 6 station base 4 rotary feeders 1 HF3 vacuum friction feeder Divert bin Turning module Alignment module Conveyor belt Autoloader envelope station This system is already equipped with a camerasystem for matching with two camera's. More and other feeders possible.

Condition: used, Year of construction: 2014, x-travel 1740 mm y-travel 760 mm z-travel 660 mm Control PC-Fusion-640M spindle taper SK 40 spindle turning speed range 40 - 12.000 U/min spindle motor 30 kW distance spindle centre table top edge 180 - 840 mm table load 1400 Kg distance spindle center to column 830 mm rapid travel x/y/z 36 m/min table width 760 mm table length 2000 mm 5-T-slots - width x distance 18 x 125 mm table height over floor 825 mm tool change unit 30 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 110 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 140 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 360 l high-performance coolant system 15 bar total power requirement 22 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,5 x 3,5 x 3,1 m Standard Equipment / Included Accessories - Through-Spindle High-Pressure Coolant System (15 bar) - Manual Pulse Generator (MPG) - Hinged Belt Chip Conveyor, Right-Hand Side Discharge - Torque-Controlled Chip Breaking Drilling Cycle - Performance Software Package Nodpfjzz Afiox Aazowl Performance Software Package Includes - 600 User Variables - MAZAK Tornado Boring & Tapping Cycle (EIA/ISO) - Synchronous Tapping - EIA/ISO Program Input - Extended EIA/ISO Functions - G93 Inverse Time Feed - G37 Automatic Tool Length Measurement - Sequence Number Comparison Stop Function - G0 Inclination Constant - Additional Work Coordinate Systems (G54.1) - Thread Cutting Function General Machine Features Adaptive Feed Control (AFC) The Adaptive Feed Control system continuously monitors spindle motor load and feed axis servo load. If a significant deviation from the programmed load is detected, the feed rate is automatically adjusted to maintain optimum cutting conditions, improve productivity and protect the cutting tool. - MAZAK Standard Machine Colour Safety Equipment - Operator Safety Door with Interlock Switch - Fully Enclosed Splash Guard - Integrated Work Area Lighting - CE Conforming Machine Coolant System Through-Spindle Coolant (TSC) - Through-spindle coolant system - Pump pressure: 5 bar Complete coolant system including pumps, valves, piping and coolant nozzles for efficient machining and reliable chip evacuation. Measuring System Automatic Tool Length Measurement Automatic measurement of small-diameter tools without operator intervention. Chip Disposal Machine prepared for side-mounted chip conveyor CNC Control - MAZATROL PC Fusion CNC 640M - 10.4" Colour LCD Display - Relocation Detector MAZAK Tornado Boring & Tapping Cycle (MAZATROL) Helical interpolation allows boring and tapping operations over a wide range of diameters using a single tool, significantly reducing programming time and machining time while increasing flexibility. Background Tool Path Verification Tool paths can be verified in the background while another NC program is being executed in automatic mode. Machining Navigation – Prediction Prior to machining, the control predicts machining time, spindle load and other operating parameters, allowing programs to be optimized for maximum productivity. Machining Navigation – Monitoring Real-time display of machining conditions and machine loads with continuous feedback for process optimisation. Machining Navig...

Condition: excellent (used), Mazak Quickturn Nexus 300 CNC Lathe Capacity Maximum bar size diameter - 77mm Maximum cutting dia - 420mm Maximum swing - 680mm Spindle Main spindle speed : Max 4,000rpm / Min 35rpm Main spindle workpiece weight ( including chuck) 450kg Spindle bore - 88mm Spindle centre line - 1080mm Spinel nose - A2-8 Axis Travel X axis 225mm Z axis 680mm Cutting feedrates (x axis max) 8m/min (z axis max ) 8m/min Rapid traverse X axis (max) 30m/min Nodpfx Aezh Ndxsazewl Z axis (max) 25m/min Turret Toolsize turning tool shank - 25 x 25 Turret indexing time 1/2 full turn 0.8 secs single step 0.2 secs No of stations on drum turret 12 Tailstock (not chucker) Body movement motor driven Body stroke 645mm Mounting taper No5 Standard centre supplied No5 Chucking systems Chuck cylinder S2078-15Y Chuck Type B210A815X Jaw stroke on diameter 8.8mm Main chuck diameter 10" Mazatrol PC Fusion CNC 640T Nexus CNC Control

Condition: like new (used), Year of construction: 2026, functionality: fully functional, Horizontal thin-cutting band saw 300 mm working width, tillable 12 degrees New 2025 model with bigger wheels and inverters on wheels. 80 mm blade width Touchscreen Schneider, PLC and Inverters Schneider Germany 22.0 KW saw motor Bigger wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. Nwodpfx Aajzy H Dyszel For slats from 2 mm * same as new *

Condition: ready for operation (used), Year of construction: 2001, DELTA LB 300 - Cup grinding machine - Grinding area max. 330x140mm - Speed range max. 2840 rpm - Max. distance table - grinding wheel 280mm - Distance grinding spindle / column approx. 300mm - Cup wheel dimensions 200x80x78mm - Drive power approx. 3 kW - Coolant system - Machine housing - Grinding wheel guard - Machine feet - Documentation Dimensions: L x W x H 0.7 x 1 x 1.8 meters / Weight 500 kg Nwodpfx Aasz Dix Sjzjl Errors and omissions excepted.

Condition: excellent (used), For sale: professional defibrillator/monitor LIFEPAK 15, a highly regarded model from Physio-Control / Stryker, year of manufacture: 2017. The device powers on fully – the display, menu, and rhythm monitoring functions work correctly (as shown in the photos). Equipment and features: • LIFEPAK 15 monitor/defibrillator – REF 99577-001390 • Serial number: 45974928 • Year of manufacture: 2017 • Two LP15 MPB batteries • Integrated thermal printer • Modules: ECG, SpO₂, NIBP, CO₂ (ports visible in the photos) • Manual and AED modes • Large color display • Original side and top carrying bags Condition: Used equipment, in good technical condition. Typical signs of use on the housing, no mechanical damage. The device starts up and enters operation mode – see photos for demonstration. Ideal for: • Medical facilities • Emergency rescue services Nwodpfx Aexy S I Reazjl • Medical event coverage • Training and educational medical applications Viewing and testing on site possible. Courier shipping or personal pickup available.

Condition: good (used), Year of construction: 2003, IPE Compact Filter BG Jet 300 Year of manufacture: 2003 Filter area: 24.7 m3 Category: BIA-KAT Airflow rate: 4000 m3/h Negative pressure: 2110 Pa Extraction diameter: 250 mm Compressed air connection: min. 6 bar - max. 8 bar Connected load: 5 kW Nominal speed: 4 kW Length: 2000 mm Width: 1000 mm Height: 3420 mm Weight: 725 kg (extraction) New filters Press: Genius 1 Hydraulic operating pressure: 190 bar Year of manufacture: 04/2003 Power: 7 kW Location: available from stock 54634 Bitburg - immediately available - Nwsdpfxsy Dc R Te Aazol Subject to prior sale Sold as seen, without warranty without guarantee

Condition: used, Year of construction: 1995, saw blade diameter 315 mm cutting diameter 100 mm Njdpfx Ajzxt Nmjazowl cutting speed 40 / 80 U/min total power requirement 1,2 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 0,8 x 0,6 x 1,65 m

Condition: good (used), Year of construction: 2002, functionality: fully functional, 3-axis machine Working area: X-axis: 3,000 mm Y-axis: 1,200 mm Height above the top edge of the suction plate: 100 mm 6 work piece supports, each with 2 tubeless vacuum suction cups, Nwjdpjz D A Rbefx Aazol each with 1 rear and 1 front work piece stop 1 work piece stop in the Y direction (left and right) 4 lifting rails for placing heavy work pieces, automatically lowerable 1 vacuum pump, 100 cbm/h Machining units: Main spindle, 5 kW Speed: 1,500 - 24,000 RPM water-cooled Rotation direction: left & right Automatic tool magazine with 8 positions moves directly along with the milling spindle for milling tools only Vertical drilling unit with 14 spindles Spindle spacing: 32 mm All spindles can be controlled individually Speed: 6,000 - 9,000 RPM Horizontal drilling/sawing unit 4 spindles Feed stroke: 80 mm Drilling diameter: max. 12 mm Grooving saw diameter: max. 125 mm Unit can be swiveled 0 / 90 degrees Control / Software IMAWOP 5.0

Condition: excellent (used), Year of construction: 2017, Sub-spindle, Y-axis, C-axis, B-axis FANUC 31i B5 NT-Smart control Turning diameter max 6400 mm Turning length -1150 mm Y-axis +/- 125 mm B-axis 1100 mm Main-spindle speeds 3'500 rpm Sub-spindle speeds 3'500 rpm C-axis positioning accuracy 0.001° Nwjdpfx Aaezz I N Tezel Milling head B-axis -120 / +105 ° Spindlespeeds 12'000 rpm Tool changer 120 positions Barloader IRCO ILS-Muk-10016II Workpiece pick-up attachment Tool breakage control device 3D measuring tracer Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2024, Manufacturer : WAM MAP Model : WBHC Year : 2024 Type: Ploughshare mixer Material: stainless steel Condition: new Nwjdpfezv Uzlsx Aazel Volume : 300 L Number of ploughshares: 6 Motor power: 9.2 kW Dimensions: 210 x 90 x 77 cm Control electrical cabinet with variable speed drive. Optional: chopper; original plugin connector available. Optional extras: original platform + stairs. Photos available on request.

Condition: excellent (used), Year of construction: 2015, Maximum cutting diameter 640mm, maximum cutting length 1100mm, bar capacity 80mm, B axis -120/+105 degrees, C axis 0.001 degrees, Spindle power 18.5Kw, spindle speed 3,500 rpm, milling power 15Kw, milling speed 12,000 rpm, sub spindle speed 3,500 rpm, Nwodpfx Astt Nrtoazol 40 station ATC, Y axis travel -/+ 125mm, Fanuc 31i control, magazine barfeed, swarf conveyor, parts catcher.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 28478-01/1/B, conveyor belt length: 3,000 mm, conveyor belt width: 300 mm, total length: 3,100 mm, total width: 350 mm, overall weight: 70 kg, power: 0.21 kW (0.29 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Length: 300 cm Width: 30 cm Height of the supports: 1 cm Nwedpfx Aoz Eg R Uoazsl Height-adjustable conveyor belt

Condition: used, Year of construction: 2022, Milling machines Travel distance X: 610 mm Travel distance Y :355 mm Travel distance Z: 460 mm Number of axis: 3 milling machine / machining center Control: Siemens 828D ShopMill spindle revolutions: 10000 rpm Speed range to: 10000 U/min table size X: 700 mm table size Y: 350 mm max. workpiece weight: 350 kg tool changer: 16 - time spindle cooling chip conveyor control Siemens Siemens 828D ShopMill control X/Y/Z travels: 610 × 355 × 460 mm Spindle speed: 10,000 rpm 16-position tool changer Table size: 700 × 350 mm Nwjdozwktyspfx Aazol Max. table load: 350 kg Through-spindle coolant with 20-bar high-pressure pump Chip conveyor Electronic handwheel Renishaw TS27R tool measurement system Renishaw OMP40-2 touch probe RJ45 network connection

Year of construction: 2022, condition: used, Used Equipment Year of Manufacture: 2022 Features and Technical Specifications: - Allows one person to effortlessly load panels onto the platform frame and swivel it from the vertical to the horizontal position - For use with format or panel cutting saws, on a shelf, or while moving between stations - Swivel frame with two-position locking mechanism in vertical and horizontal positions - Table height can be adjusted to the desired working height using a foot-operated hydraulic system - Design featuring a smooth-operating scissor mechanism ensures that the platform can be raised and lowered absolutely parallel - Sturdy support rollers on the lower support and multiple all-directional casters ensure smooth, ergonomic operation - Counterweight on the lower frame for secure footing and maximum stability when moving the table - Unrestricted access to the workstation table’s control pedal - Easy to maneuver thanks to four swivel casters with a diameter of 125 mm - Two casters are equipped with brakes - The swivel frame can be mounted on and removed from the platform base frame in just a few simple steps - Meets the safety criteria of EN 1570-1 - Load capacity: 300 kg Nodpezk Nqdsfx Aazjwl - Maximum table height: 1010 mm - Minimum table height: 400 mm - Swivel frame width: 1800 mm; length: 1500 mm - Casters: 125 mm in diameter Dimensions: 1,200 x 740 x 400 mm Weight: approx. 80 kg Swivel frame weight: 10 kg Availability: available shortly Storage location: 63934 Röllbach

Condition: new, Year of construction: 2024, load capacity: 300 kg, Protec KT 300 H welding turntable, 170/400 special version Horizontal load 300 kg, tilted 150 kg Power consumption 220 V, 50 Hz Table diameter 450mm Hollow shaft diameter 170mm Table height 500mm Welding current transmission 400 A Quick-action chuck diameter 300mm, surcharge 550.-€ Quick-action chuck diameter 400mm, surcharge 750.-€ Crank gear motor 0 - 90° stepless adjustment Infinitely variable speed 0.01 to approx. 5 rpm. incl. foot remote control Nedpfx Aaerypmvozjwl Digital display with welding time limiter (if required)

Condition: good (used), Year of construction: 2007, Workpiece height – max. 100 mm Workpiece width – max. 1300 mm Nedez Dvyvepfx Aazewl Feed rate 0.4 – 2.6 m/min Number of spindles 6 pcs Spindle length 6 x 350 mm Total power consumption 7.5 kW Machine weight approx. 2.3 t Space requirement approx. 2.07 x 2.3 x 2.21 m Additional information Includes a circulating conveyor system for workpiece carriers and an extraction/filtration system.

Condition: used, all stainless steel 2 front discharge guards Nwsdpfxozz H Stj Aazol 2 mixing directions safety lid overall dimensions (l x w x h) : ± 2.200 x 1.000 x 2.100 mm

Condition: used, Year of construction: 2012, - Machining area: 5300x1400 mm - Main spindle replaced 3 years ago - 18-position tool changer Technical data Machining area - In the X direction: 5300 mm - In the Y direction with main spindle + WZ-0: 20 mm: 1400 mm - In the Y direction with drilling unit: (all vertical drills) 890 mm - Single-position machining: X = 2 x 2550 mm - Free space in the center: X = 200 mm - Alternating field machining: X = 2 x 2250 mm - Free space in the center: 800 mm 1 automatic tool/adapter changer magazine - Arrangement: mounted on the support, moving in the X direction - Disc changer with 18 magazine positions Guidance system - All axes are equipped with pre-tensioned, surface-hardened precision roller guides. Central lubrication - Manual central lubrication for all main axis linear guides and Z ball screw. Nedpfjzuw Rtsx Aazowl 1 vacuum pump, 90 m3/h Console table consisting of: - 2 work piece stops fixed on the right and 2 on the left in the X direction, for movement in the Y direction - 10 adjustable support arms in the X direction, each with a rear stop - All stops are controlled by the program - The suction plates are fixed via the patented 2-circuit clamping system, eliminating the need for hoses. - 8 smooth support rails, automatically retractable - 2 push buttons for the workpiece clamping/releasing function Additional 2nd vacuum pump, 90 m3/h 1 additional central stop row, for centering workpieces Chip conveyor 1 main spindle - Drive power: 10.0 kW in S-6 operation - 7.5 kW in S-1 operation - Tool holder: HSK F63, taper diameter = 38 mm, similar to DIN 69893 - Speed range: infinitely variable RPM, programmable 1 centrally integrated CNC axis, rotating 360 degrees - for all adapter units, with torque support on the main spindle and pneumatic interface 1 vertical drilling unit l14 with 6 spindles, horizontal and attachment unit for a dado cutter - Horizontal drilling units with 2 outputs each Attachment unit for a dado cutter - Swivel range: 0 or 90° Control system ICOS CNC Modern, powerful PC-based control system with: - User-friendly interface with Windows standards - Trajectory control of all servo axes - Job list / order processing - IMA backup and recovery system on two hard drives - Uninterruptible power supply (UPS) IMAWOP software package - for dialog-oriented creation of CNC machining programs - - 3D view and basic simulation of the programmed workpiece, the suction cups and consoles including tool and adapter display.

Condition: used, loading : 75 to 80 % Nwodpfoz Ahfwsx Aazsl 2,77 kW tiltable drum with 2 arms pneumatic: 6 bar outside dimensions (l x w x h) : ± 2.110 x 1.100 x 1.650 mm

Condition: used, Year of construction: 2021, operating hours: 3,500 h, clamping force: 120 kN, displacement volume: 36 cm³, injection pressure: 2,200 bar, overall weight: 5,400 kg, screw conveyor diameter: 22 mm, terms of delivery: EXW (ex Works) Nwedpszhpg Tefx Aazol delivery time: on request terms of payment: 100% prior to delivery

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Njdpsydpxvjfx Aazswl Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg