Used Limb Protection for sale (12,311)

Condition: ready for operation (used), Year of construction: 2021, operating hours: 300 h, functionality: fully functional, total height: 1,000 mm, total width: 550 mm, total length: 1,200 mm, laser power: 1,500 W, laser wavelength: 1,075 nm, ambient temperature (max.): 45 °C, The machine is in very good condition with less than 300 operating hours! TECHNICAL DETAILS Laser power at the workpiece: 1,500 W Wavelength: 1,075 ± 5 nm Type of laser beam delivery cable: LLK-A / BF 10 Laser safety Laser protection class: 4 Performance Level Emergency Stop button (PLE) TSS – Triple Security System Installation conditions and options Ambient temperature: 5–45 °C Integrated cooling Operating concept Machine control: Touch panel Programmable channels: 9 WLAN MACHINE DETAILS Dimensions (W x H x D): 550 × 1,000 × 1,200 mm EQUIPMENT Integrated pilot laser BLT laser welding device PenWelder Laser beam delivery cable Hfjdozb Nl Ropfx Afrjh Connection cable Contact tips and guide rail Configurable access control OPC-UA interface Remote service

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P1065-22-A-01, controller model: Siemens SPS S7, wall material: stainless steel, cooling capacity: 180 kW (244.73 HP), nominal flow rate: 16,500 m³/h, product height (max.): 150 mm, The new price of the machine was €650,000! TECHNICAL DETAILS Layout: 180° layout Levels: 17.5 Free product height: approx. 150 mm Level spacing: approx. 216 mm Total cooling capacity: approx. 180 kW Total power consumption: approx. 70 kW Power connection: 400 / 230 V, 3-phase, 50 Hz Refrigerant: R717 Refrigerant supply: NH3 pump operation Ambient temperature: above 10 °C Belt System Belt direction: from bottom to top Infeed height: approx. 8,500 mm / 500 mm outside the cell wall Outfeed height: approx. 4,728 mm / 400 mm outside the cell wall Belt type: Stainless steel transverse belt with side edges on both sides Belt mesh: 12.7 x 27.43 mm Wire thickness: 1.4 mm Belt width: approx. 762 mm Usable belt width: approx. 700 mm Usable belt length: approx. 300 m Belt length including infeed and outfeed: approx. 320 m Housing Housing length: approx. 8,700 mm Housing width: approx. 6,920 mm Housing height: approx. 5,200 mm Insulation thickness: approx. 140 mm Plastic elements: approx. 2,600 mm Width of operator walkway: approx. 1,500 mm Evaporators Number of evaporators: 4 units Evaporator capacity: approx. 60 kW each Airflow: vertically drawing, 45° upwards Air temperature: approx. -32 °C Evaporation temperature: approx. -40 °C Defrosting: manual with air or hot gas Evaporator surface: 311 m² each Airflow rate: 16,500 m³/h each Fans: 4 units per evaporator Fan power: approx. 7.5 kW Air ring heating: 4 x 0.72 kW Defrost interval: sequential Heating in the basin: hot gas Control System and Control Cabinet Control system: Siemens PLC S7 CPU: 1512SP-PN Touchscreen: 12" Operating panel: TP-1200 Comfort Panel Interface to refrigeration system: 0 - 10 V Main drive: 1 x approx. 2.2 kW Overdrive: approx. 1.1 kW Control cabinet: Stainless steel on stainless steel base Temperature display: min. 1x per day Operating hour counter: available Belt cleaning: freely programmable Alarm lamp: visual, green / yellow / red Construction Material: Stainless steel 1.4301 Conveyor belt: Stainless steel, 762 mm Side guides for conveyor belt: approx. 25 mm Number of outlets: 2 units Product guides: 2 units EQUIPMENT Stainless steel construction Hsdpfezardtox Afrsfh Insulated housing with 140 mm insulation thickness Stainless steel belt with side edges on both sides Belt path from bottom to top Internal arrangement of the single-tower spiral Infeed at the bottom Outfeed at the top Hygienic design Food-grade plastics Maintenance-friendly accessibility SEW main drive with Danfoss frequency inverter SEW overdrive with Danfoss frequency inverter Motors in energy efficiency class IE3 Siemens PLC S7 with CPU 1512SP-PN TP-1200 Comfort Panel Touchscreen display Variable belt speed Operating hour counter Fault reporting system with traffic light and signal horn Emergency stop switch and safety sensors Height and belt control on each level Stainless steel cabinet on stainless steel base Freezer LED lighting controlled via the touch panel Welded stainless steel floor pan with slope and drain outlets Underfloor protection heating with reserve circuit Floor temperature sensor with reserve sensor 4 separate evaporator units, each with one fan Evaporator tubes made of stainless steel Evaporator housing made of stainless steel Evaporator pans made of stainless steel Hot gas defrosting made of stainless steel in the block Sequential defrosting Inspection hatch in the fan box Remote maintenance Ethernet

Condition: ready for operation (used), functionality: fully functional, input voltage: 400 V, operating pressure: 6 bar, conveyor belt width: 1,000 mm, production capacity: 18,000 unit/h, The new price of the machine was €460,000! TECHNICAL DETAILS System type: NIVERPLAST packaging line / roll packaging machine Maximum output: 18,000 products/h Packaging unit: 20 pieces Electrical connection: 400 V AC + N + PE / 50 Hz Minimum compressed air connection: 6 bar Compressed air connection: 3/8" Hodpozaq Anjfx Afrjfh Camera counting module Camera system: 1 color camera Baguette capacity: 10,000 pieces/h Maximum capacity for individual products: 60,000 pieces/h LED lighting lifespan: 30,000 h Touchscreen: 19" Conveyor width: 1,000 mm SEPP tubular bag machine Type: VFFS 45° Filling weight: 0.5 - 5.0 kg Maximum output: 2,400 bags/h Drive: AC motor, Lenze Frame: Stainless steel Protective cover: Polycarbonate 6 mm Bag dimensions Bag length: min. 100 mm Bag length: max. 900 mm Bag width: min. 220 mm Bag width: max. 465 mm Film dimensions Film width: min. 500 mm Film width: max. 970 mm Carton erector C-400 Carton length: min. 300 mm Carton length: max. 600 mm Carton width: min. 200 mm Carton width: max. 400 mm Carton height: min. 120 mm Carton height: max. 500 mm Format changeover time: approx. 1 - 2 min Working and discharge height: 600 mm ± 30 mm Carton closer CS-300 Carton length: min. 300 mm Carton length: max. 650 mm Carton width: min. 200 mm Carton width: max. 450 mm Carton height H: min. 115 mm Carton height H: max. 350 mm Carton height C: min. 200 mm Carton height C: max. 500 mm Format changeover time: approx. 1 min Adhesive tape roll length: approx. 990 m Adhesive tape width: 50 mm EQUIPMENT Product feed conveyor Elevator conveyor Intermediate conveyor Camera counting Platform for camera counting Batch conveyor with buffer flap Cross conveyor Discharge chute SEPP Niverplast tubular bag machine 45° inclined forming tube Thermal transfer printer Bag transport Turntable Carton erector Lantech C-400 Empty carton conveyor Button to request empty cartons Packing position Full carton conveyor Gravity roller conveyor Carton closer Control cabinet including control panel and power supply LED light bar, air-cooled Retraction belt with pneumatic drive Separation finger made of stainless steel Stainless steel frame Stainless steel control cabinets on the counting module Film roll drive Detection of empty film rolls Film tear detection Film buffer Tension cylinder Integrated film alignment Automatic film alignment with sensor Impulse sealing with film cutting knife Bottom closure with self-adhesive strip Format adjustment by means of handwheels Clear plastic cover Side presser on the cutting magazine Side curtain on the cutting magazine Control "Carton properly erected" Control "Self-adhesive tape used up or torn" Control "Carton past vacuum suction frame" Discharge with photocell control "Discharge free" Carton closure on top with adhesive tape Open cable channel with metal-detectable cable ties Powder-coated control cabinet HMI Lenze v800-P IPC Lenze, Codesys, IEC 61131 Safety components Pilz Drives Lenze Pneumatic components Festo Sensors Sick

Condition: used, This listing is for Biomat 2 1200EXH Class 11 Safety Cabinet. The unit is in full working condition and ready for immediate use. Available with or without the stand Caution. The height of the unit including the filtration unit is 1960mm (Without the optional stand) and 2610mm when on the stand (+-10mm adjustable glides) Overall width 1200mm and depth 1180mm (Note the extra depth). The foot print is square This high-performance recirculating enclosure utilizes dual fan HEPA filtration to deliver dependable workspace containment, protecting personnel and product environments in modern research and bioprocessing laboratories Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. [[1](?srsltid=AfmBOoo2CxS6O5SCG0S0zUWDq4xUKCgkGbkylLnULHI4J729cw GPs-bk)] Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory Hfedpfxezc Hths Afrsh • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: excellent (used), Year of construction: 2012, Operating range V808 Min. / max. height 10 – 500 mm1 Min. / max. width 60 – 1.250 mm Max. positioning weight 13.200 kg Min. material length 1.200 mm Max. cutting width at the bottom 800 mm (only plasma marking and cutting) Plasma cutting unit* Hypertherm HPR260XD Virtually dross-free cutting max. 32 mm Marking lines Yes, marking and cutting with the same consumables Plasma gas mild steel O2 (99,9% pure clean, dry, oil-free) Shield gas mild steel O2/air (99,9% pure clean, dry, oil-free) Cutting speed 12 mm Approx. 3850 mm/min., 260A Cutting speed 20 mm Approx. 2170 mm/min., 260A Cutting speed 32 mm Approx. 1135 mm/min.; 260 A Fuse Additional 75 A slow is required Plasma Gas O2 (99,9% pure clean, dry, oil-free) Consumption 80l/min System pressure 10 bar * grounding, max. 6m of machine: AC power, PE, and service grounds must be connected to all equipment according to local and national codes. Oxy-Fuel cutting unit Gas supply Magnetic valve with back-fire protection Ignition Automatically Gas Acetylene Hedpszcfpzsfx Afrsfh Consumption 20l/ min System pressure 2 bar Cutting Gas O2 Consumption 450l/ min System pressure 10 bar Operational direction From right to left Profiles 1 Flat steel Angles European standard channels (UNP) European I-beams (IPE) European standard beams (IPN) European wide flange beams (HE) British universal beams (UB) British universal columns (UC) Square tubes 1 Small profiles have to be sufficient straight. General Voltage Stabilizer Not included Ambient temperature 0 - 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm)

Condition: new, This is a LOMA Systems IQ-series industrial metal detector, commonly used in food and dairy processing lines. Here’s a clear, practical breakdown of what it is and what it does. Its job is foreign body detection — specifically metal contamination — to protect: - Product safety - Equipment (pumps, fillers, valves) - Brand and compliance (HACCP, BRC, IFS, etc.) You’ll typically find these on: - Dairy products (cheese, butter, powders) - Ready meals - Meat & poultry - Bakery - Packaged foods on conveyors What metals it detects The IQ range detects all three common metal types: - Ferrous (iron, steel) - Non-ferrous (brass, aluminium) - Stainless steel (the hardest to detect in food environments) Sensitivity depends on: - Aperture size - Product type (wet/dry, salt content) - Conveyor speed - Calibration The LOMA IQ control system The LOMA IQ® controller you showed is the heart of the machine. Key features: - Digital signal processing (very stable, low false rejects) - Product memory presets (quick changeovers) - Automatic calibration - Password protection (QA / operator levels) - Event & fault logging (useful for audits) - Reject confirmation & fail-safe monitoring This is why LOMA machines are popular in regulated food plants. - Conveyor metal detector with integrated electronics - Stainless steel construction (washdown suitable) - Reject output (air blast, pusher, stop-on-detect — depends on configuration) - Industrial power supply (as per the data plate) Hodpfxjzbg Ens Afrofh The data plate confirms: - 415V 3-phase + neutral - 240V single-phase control circuit - UK-manufactured (LOMA Systems, Hampshire) Why buyers like these - Extremely reliable - Easy to validate and document - Long service life - Strong resale value - Widely supported (spares & engineers) That’s why they’re common on the used dairy machinery market. Condition: Good Availability: Immediately

Year of construction: 2020, operating hours: 10,000 h, condition: excellent (used), functionality: unexamined, FFP1,FFP2,FFP3,Carbon Layer Available Cup type, C type, Duckbill type, Flat-Fold type. FFP2 masks are suitable for filtering out at least 94% of airborne particles, including dust, smoke, aerosols, and droplets. They protect against hazardous materials up to 10 times the workplace exposure limit. They are widely used across several settings: Healthcare: Protecting wearers against airborne viruses, bacteria, and pathogens (such as influenza and COVID-19). Hfsdoza E Rajpfx Afrjh Construction & DIY: Safeguarding lungs from hazardous dusts generated by drilling, masonry work, plastering, sanding, and handling loft insulation. Industry: Filtering oil and water-based mists, as well as dusts found in woodworking, agriculture, and waste management. An FFP3 mask (Filtering Facepiece 3) is a high-grade respirator used to protect against hazardous airborne substances. It filters at least 99% of airborne particles and is essential in environments with high concentrations of toxic dusts, aerosols, and pathogens.

Condition: used, all stainless steel electrically heated 386 kW with lower and upper belt frying length 8.000 mm belt width 630 mm adjustable speed oil circulation pump suitable for fire protection Hjdszcwddspfx Afrsfh sediment removal system electrical hoists overall dimensions (l x w x h) : ± 11.550 x 1.700 x 2.900 mm

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer gearbox Bonfiglioli type: MVF49/F -Manufacturer Engine Fimet Type: MOF71A4 -Speed: 197 rpm -Power: 0.37 kW -Design: B5 angle Hodoci Dk Uepfx Afrsfh -Shaft diameter: Ø 18 mm -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Dimensions: 400/198/H200 mm -Weight: 16.3 kg

Condition: excellent (used), Year of construction: 2022, electric motor, three-phase motor -Condition: unused -Manufacturer: Weg, electric motor type W22 315S/M-04 -Power: 132 kW -Speed: 1488 rpm -Shaft: Ø 80 x 170 mm Hfjdpfxeuhr R Ts Afroh -Design: B3 -Protection class: IP 55 -Dimensions: 1280/640/H845 mm -Weight: 991 kg

Condition: new, Year of construction: 2022, AVAILABLE FROM STOCK : Geka plasma cutting machine GCS P-4020 table size 4000 x 2000mm incl. plasma source Hypertherm 125A incl. PRONEST HYPETHERM NESTING SOFTWARE - GEKA CNC cutting table - Hypertherm Powermax 125A - cutting capacity: steel 25mm, stainless steel 20mm, aluminium 12mm - CNC control with GproCUT 2D CAD cutting software - Nesting included. - Country of manufacture Spain incl. CE conformity. - Heavy duty base for increased support and rigidity. - CNC Tex computer control with touch screen. Hfjdpogypclofx Afreh - Linear guides on all axes for high repeatability. - Safety cutting head to prevent damage to the cutting head. - Rack and pinion gearbox with 70kg/cm servo motors. - Fully enclosed cable drag to protect cables from damage. - Movement speed 40 meters/min. - Resolution 0.01mm. - Optional automatic lubrication on all axes. - Optional, separate suction chambers in the machine bed. - Z-axis with integrated THC (Torch Height Control) to ensure automatic cutting distance between torch and material during the entire cutting process. - Torch anti-collision system (machine stops before any collision). - Laser pointer to check X and Y axes for zero reference. - The effective cutting area for P-4020 is 4000 x 2000mm. - Portal height Z = 100 mm. - Table with compartements for aspiration

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel suitable for thermal oil heated 12,7 kW frying length 3.000 mm belt width 600 mm top hold down belt adjustable speed mechanical lid oil circulation pump Hjdpjzcaynofx Afrofh oil level control suitable fire protection sediment removal system filter lifting unit with mechanical hoists total length ± 5.650 mm total width ± 1.800 mm total height ± 3.450 mm

Condition: used, mileage: 74,000 km, power: 96 kW (130.52 HP), first registration: 08/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, navigation system, parking heater, soot filter, Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Attention!!! Sales are preferably made to commercial customers. Internal ID number: [ 3407 ] ----Optional extras: * 12-64 months warranty (valid throughout the EU) * New inspection * New TÜV (German technical inspection) & emissions test * Nationwide delivery * Financing possible, even without a down payment * Spring offer: Upon request and for an additional charge of only €999, increase the trailer load to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * 19% VAT can be shown * Regularly maintained * German vehicle * Immediately ready for use * 2nd owner * Euro 6 standard * Accident-free * High + Long * Automatic climate control * Trailer hitch, up to 3,500 kg possible * Reinforced springs * Rearview camera * Bluetooth multimedia system * 3 seats Special equipment: Airbag, passenger side, Airbag, driver side, All-weather/all-season tires, Audio system 24/25: Navigation system including SYNC 3 with AppLink and 8" multi-function display, Battery monitoring, programmable, Vehicle without vinyl flooring in the cargo/passenger compartment, Load compartment light, LED, Fog lights with static cornering light, Service-Line package, Visibility package 3, Steel rims 6.5x16, 12V socket in the cargo/passenger compartment Additional equipment: Storage compartment in the headliner of the driver's cabin, Trailer Stability Assist (TSA), Exterior mirrors, electrically adjustable and heated, Turn signal in exterior mirror, Floor covering: vinyl in the cargo/passenger compartment, On-board computer, Entry lights, Electronic brake force distribution (EBD), Electronic traction control, Driving assistance system: Hill start assist, Driving assistance system: Emergency brake assist, Driving assistance system: Crosswind assist, Rear wing doors (opening angle 180 degrees), Heating with recirculation, Body/structure: Box body, high roof, standard, Body variant: Medium-high roof, Steering column (steering wheel) height/longitudinally adjustable, Engine 2.0 L - 96 kW TDCi CAT, My Key (2nd vehicle key, programmable), Parking pilot system front and rear, Wheelbase 3300 mm, Tire repair kit, Low emissions according to Euro 6d-TEMP emission standard, Gear/selector knob, leather, Windshield wipers with intermittent function, adjustable, Sliding door cargo/passenger compartment, right, Mud flaps, rear, Side protection strips, Seat package 13: Driver's seat (4-way adjustable) - passenger double seat, fabric, Start/stop system, Trend, Rear step integrated, Interior paneling in the cargo/passenger compartment: high, Lashing eyes (10), Roll Stability Control (RSC), Heat-insulating glazing, lightly tinted, Additional heater, electric, Second key with folding remote control ----Would you like to lease or finance? Hedoymv E Ijpfx Afrefh We offer attractive deals – even without a down payment! Feel free to contact us. Contact: Telephone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln - Germany Opening hours: Mon-Fri: 9:00 AM - 6:00 PM Sat: 9:00 AM - 2:00 PM ----Note: All information on the internet is non-binding and serves only as a general vehicle description. Errors, typos and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. We prefer to sell vehicles with a mileage of over 50,000 km or older than 3 years to our commercial customers.

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 2,000 kg, color: black, power: 720 kW (978.93 HP), output voltage: 400 V, output frequency: 50 Hz, continuous power (apparent): 800 kVA, Containerized Rotary UPS System Featuring Marelli Generator MJB 400 LB4 B2 & Rotabloc Flywheel Technology Model:MJB 355 MB4 B2 Rated Power: 900 kVA, 400V / 920 kVA, 440V Active Power: 720 kW Voltage: 400 V / 440 V Frequency: 50 Hz / 60 Hz Rated Current: 1155 A, 400V / 1207 A, 440V Speed: 1500 / 1800 rpm Power Factor: 0.8 Insulation Class: H Weight: 1950 kg Protection class: IP23 Bearings: 6317 C3 Lubrication: Mobil Polyrex EM Rotabloc RBT Alternator (Flywheel-Based UPS) Model Type: MJB-355 UPS Power Limitation:500 kVA Voltage Range: 400 V ±12.5% Current: 722 A Frequency: 50 Hz Hfsdpfjwx H Hzsx Afrsh Speed: 1500 rpm Weight: 1950 kg Manufactured in Belgium Features & Benefits Rotary UPS – No batteries required Compact footprint with integrated cooling Ideal for grid stability and critical systems Reliable European engineering (Belgium & Italy) CE marked, ready for international use

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. Hfjdozb Elmspfx Afroh all stainless steel nett belt length 3.000 mm nett belt width 400 mm mesh width ± 10 mm suitable for thermal oil heating (= 115 kW) oil circulation pump level control adjustable speed infeed conveyor outfeed conveyor sediment removal system lifting unit with mechanical hoists suitable for fire protection overall dimensions (l x w x h) : ± 5.200 x 1.700 x 3.100 mm

Condition: used, Year of construction: 2014, The Kongsberg C series is a multifunction super-wide digital cutting table for soft and rigid signage production. It’s perfect for protective packaging and can handle a wide range of materials, from foam and plastics, flexible materials, folding carton and all kinds of corrugated. The Kongsberg C table is designed to keep up with the faster, wider printers of today and tomorrow. Exceeding the standards in versatility, precision and productivity, it has everything that Kongsberg tables are noted for, and more. Max. material size: 3200 x 3200 mm Max. speed: 1666 mm/s Max. acceleration 15.7 m/s2 Tools: - vibracut HF - ⁠presscut - ⁠rotacut - ⁠rm knife - ⁠heavy duty unit Hfsdpfx Aezcqp Tjfreh - ⁠cordoni di varie tipologie - ⁠HD-30 - ⁠V-notch knife 45 In production, demo possible upon request For further technical details please refer to attached brochure

Condition: excellent (used), Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Chiaravalli, worm gear motor -Speed: 54 rpm -Transmission: Type CBFV040 i 25 -Engine: Type CHT 63C4 B14 0.22 kW Hedpfxox Rw H Ns Afrsfh -Protection class: IP 55 -Hollow shaft: Ø 18 x 78 mm -Quantity: 1x geared motor available -Price: per piece -Dimensions: 315/118/H155 mm -Weight: 7 kg/pc.

Condition: good (used), Year of construction: 2014, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length Hfsdpfxozc Rv Ho Afrsh * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: excellent (used), BUEHLER Beta 49-5100-230D with Vector Power Head Manufacturer: BUEHLER / Wirtz-Buehler Type: Beta Grinder-Polisher Model: 49-5100-230D Machine Type: Metallographic Grinding and Polishing Machine For sale is a metallographic grinding and polishing system from BUEHLER, including Vector Power Head and extensive accessories. The system was developed for the preparation of metallographic samples in laboratories, quality assurance, and material testing. Technical Data Mains connection: 230 V Frequency: 50 Hz Current consumption: 1.6 A Protection class: I Protection type: IP20 Grinding wheel speed: 30 - 600 rpm, continuously adjustable Wheel diameter: 203 mm (8") or 254 mm (10") Power consumption base unit: approx. 575 W Vector Power Head Semi-automatic sample processing system Power Head speed: 60 rpm Timer function integrated Automatic force application Single and central pressure operation possible Water and dispenser control Sample capacity, single holder: up to 4 samples Sample capacity, central holder: up to 6 samples Pressing force, single sample: 0 - 75 N Pressing force, central holder: 20 - 300 N Compressed air requirement: approx. 6 bar Equipment Hfedjzc Hlkopfx Afreh BUEHLER Beta Grinder-Polisher Vector Power Head Sample holders Consumables according to images Polishing cloths Abrasives Documentation and catalogs Other accessories according to scope of delivery Application areas Metallography Material testing Material analysis Quality assurance Research and development Laboratory applications Sample preparation Condition Used Optical condition according to images. Scope of delivery as shown in the images. A complete technical functional test has not been performed. Inspection possible by appointment. Changes and errors in the technical data and information are subject to change. Subject to prior sale.

Condition: excellent (used), Year of construction: 2019, operating hours: 9,982 h, functionality: fully functional, turning length: 1,250 mm, turning diameter over cross slide: 500 mm, turning diameter: 500 mm, spindle speed (max.): 12,000 rpm, spindle bore: 76 mm, rotational speed (max.): 5,000 rpm, bar diameter (max.): 76 mm, Equipment: documentation/manual, rotational speed infinitely variable, We are not a dealer. More detailed photos will be available soon. We have this exceptional machine for sale, fully equipped and in perfect condition, having been used as a demonstration model. It is possible to purchase the machine on a turnkey basis, including all tools and clamping devices, and a postprocessor. Training is also available. The machine is currently powered and operational. You are welcome to visit and see the machine in working condition. Any inspection is possible. DMG MORI CTX BETA 1250 TC Gen2 Siemens 840 control system. Main spindle ISM76. Sub spindle. Tailstock. Milling head, 12,000 rpm, B-axis, compactmaster2. 5-axis simultaneous machining! Capto C6 – 80-tool chain magazine! Robot/bar feeder/automation package: + Automation interface + Signal light + Electrical door + Bar feeder interface + Parts catcher + Coolant flush for main spindle + Coolant flush for sub spindle Chip conveyor. Machine cooling system, external (tropical package). Oil mist extraction system. Coolant spray gun. Hydraulic differential clamping pressure. 8/20/80 bar coolant supply with filter and cooling unit (largest tank): + 80 bar high-pressure system + Filter unit + Coolant water chiller + Internal coolant + External coolant Measuring/monitoring: 3D probe, Heidenhain. Tool probe, Heidenhain. DMG technology cycles: + Tool sorting cycle + Multitool + Alternating speed + Retraction cycle + 5-axis simultaneous machining + MPC (machine protection control) + Eccentric machining + Oval turning + Probing Bar feeder (short loader). Fusion 360 postprocessor available. Main spindle chuck: Schunk 315. Sub spindle chuck: Hainbuch 65. Toolholders: Sandvik/Hoffmann Capto C6. Spindle liners, various sizes (OEM DMG). Hodpfx Afezdck Sjrofh Original DMG lifting gear. All documentation is complete. Max. turning length: 1200 mm Max. turning diameter: 470 mm Tool magazine: 80 tools Main spindle speed: 5000 rpm Sub spindle speed: 5000 rpm Milling spindle speed: 12000 rpm (The best TC ever made, stronger than a new CTX450TC). Please feel free to ask any questions. The machine is for sale on a turnkey basis. The machine is also for sale as a base machine (without tooling, etc.).

Condition: used, operating hours: 16,911 h, Vehicle No.: 407-25 HITACHI ZX 250 LCN-3 Year of manufacture: 2008 * 132 kW * Hammer circuit * Quick coupler Hodpszc Airsfx Afrsfh * Cabin protective grille * Undercarriage approx. 70% Inspection possible at any time during our business hours, test drive by appointment! For export sales, a deposit will be retained and refunded upon receipt of the confirmation of arrival. Company logos or advertising markings on the vehicles may have been digitally edited in the photos. No guarantee is given for the functionality of the extras. All information is provided without guarantee - subject to errors, changes, typographical mistakes and prior sale. Vehicle descriptions explicitly do not constitute guaranteed characteristics. We refer to our General Terms and Conditions, which must be acknowledged.

Condition: good (used), Year of construction: 2010, sheet width 4100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 9 - 26 Hub/min back stop - adjustable 10.0 - 750 mm down holder 22 Stk. oil volume 200 ltr. engine output 7.5 kW weight 8000 kg. range L-W-H 5145 x 2200 x 1750 mm From a maintenance workshop Very well-maintained / good condition With very few operating hours (!!) Current list price approx. 60.000 euros Special price upon request Features: Hodpfx Aszcqy Sofrofh - Robust electro-hydraulic, slide-guided sheet metal shear - LVD control panel centrally located on the front of the machine (left) - Electro-hydraulic cutting angle adjustment * Includes digital display of actual values - Manual cutting gap adjustment * via handwheel from the front (left) * Includes analog value display - Electro-motorized backgauge with ball screws * Includes digital actual position display * Rapid traverse is possible - 1x extra-long side stop 3,000 mm, with support foot - 1x long support arm - Ball-bearing recessed handles in the support table - Front finger guard - Rear sheet metal chute - Safety device - rear (protective grille) - 1x freely movable foot switch - Machine lighting at the front (custom-built) - Operating instructions

Condition: new, bore capacity in steel (diameter) 28.0 mm throat 320 mm bore stroke 150 mm morse taper 3 MK table: 500 x 350 mm turning speeds 75.0 - 3010 U/min total power requirement 1.35 / 1.70 kW weight 290 kg range L-W-H 600 x 700 x 1900 mm Description: - Standard with automatic quill feed (0.04 - 0.3 mm / rev) - Helical gear for optimal power transmission - High efficiency and smooth running thanks to helical gears - in combination steel against reinforced fiber material - Automatic quill feed Hedoxaba Ajpfx Afrofh - is deactivated when the set drilling depth is reached - Direction of rotation switch for clockwise and counterclockwise rotation for thread cutting - Stable and polished steel column, designed for heavy use - Quality ball bearings ensure high concentricity - 8 switchable speeds through powerful 2-stage drive motor - Adjustable drilling depth stop with mm scale Scope of delivery: - Keyless chuck 1 - 16 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Automatic tool ejector - Right-left rotation device - Height-adjustable protective cover

Condition: used, maximum load weight: 13,400 kg, overall weight: 16,000 kg, first registration: 01/2013, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,470 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2013, Vehicle No. G0106520 – Manufacturer: Krone. * Simple corner fittings * Drop-in slat (wood) * Side/rear contour markings * Load certificate Code-XL Hedpfsy N N Aaox Afrofh * Portal door with double external locking bars * Sliding side curtain * Forklift accessible * Fixed landing legs * Equipment for rail transport * Lashing recesses * Lashing options Financing available on request. Financing possible. NEW paintwork: Choice of colours in RAL – choose your shade when ordering! Delivery time: IMMEDIATE AVAILABILITY. New tarpaulin. Freshly painted. NEW tensioning ratchets! Technically ready for operation, superstructure and landing legs freshly painted. NEW door seals! Undercarriage (KTL) cleaned and treated with underbody protection. UVV valid. UVV documentation available. NEW PAINTWORK!!!. CARGO SECURING CODE XL!!!. Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net ex-works in D-59302 Oelde. Further details upon request by phone or email:

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2023, loading space length: 9,395 mm, total width: 2,480 mm, Year of construction: 2023, Equipment: ABS, KRONE 2-axle swap chassis, Type: MAXI AZW 18 eL3B7, year of manufacture 02 / 2023 > Offer non-binding and subject to prior sale > Gross weight 18,000 kg > Technically ready for operation with normal signs of use, as shown in the pictures > Body / chassis: Color RAL: 9005 / black Hjdpfx Asy N N Dwefrjfh > Suitable for BDF superstructures - 7.45 with a support height from 1,020 to 1,320 mm > Unladen ride height: 1,080 mm > Tyres: 4 pcs, 445/45 R19.5, in good condition > Axles: Brand BPW > Brake system: EBS 4S/3M > Drawbar: length adjustable (12 x 50 mm) from 1,800 to 2,400 mm with towing eye / 40 mm > MOT & safety inspection current / new > Air connections: red / yellow > Electrical connections: ABS and 1 x 15-pin > Additional galvanized rear underrun protection > Immediately available and available in multiple units > Price ex location D-59269 Beckum