Used Wind Protection for sale (13,868)

Year of construction: 2020, condition: like new (used), functionality: fully functional, The A.Celli Stream in Line 668 is a complete industrial in-line slitter winder designed for integration into medium- and low-throughput production lines for nonwoven fabrics and composite materials. The machine performs longitudinal web slitting and surface-driven winding of finished rolls. The slitting system uses 12 circular-knife units operating with band counter-knives mounted on a motorized expanding shaft. The configuration includes a motorized S-wrap, a motorized SUS supporting roller, edge-trim extraction, shaft supports, a bar acceleration mechanism and a roll holder. The web is guided through bowed spreader rollers to reduce wrinkles and folds. The machine is equipped with AC drives, a control cabinet, an operator panel, a desktop computer with monitor and industrial communication via Profinet and Ethernet TCP/IP. Manufacturer: A.Celli Nonwovens S.p.A. Machine type: Stream in Line Machine version: 668 Serial number: 2020026 Year of manufacture: 2020 Application: Longitudinal slitting and winding of nonwoven fabrics and composite materials Winding design: Surface driven Production speed: 200 m/min Web threading speed: 10 m/min Cross-cutting system: Circular knife Longitudinal slitting system: Band counter-knives on a motorized expanding shaft Number of slitting units: 12 Edge-trim extraction: Yes Number of shafts: 4 Shaft diameter: 3″ Drive system: AC motors Motorized S-wrap: Yes Motorized SUS supporting roller: Yes Shaft supports: Yes Bar acceleration mechanism: Yes Roll holder: Yes Drive side: Left Operator side: Left Control cabinet side: Left Operator panel colour: RAL 7035 Control cabinet colour: RAL 7035 Length: 6200 mm Width: 5550 mm Height: 3045 mm Total weight: 16,000 kg Supply voltage: 400 V Number of phases: 3 Auxiliary AC voltage: 230 V DC control voltage: 24 V Kedpfx Abozudfdovenc Frequency: 50 Hz Power supply earthing system: TN Protection rating of power cabinets: IP55 Electrical reference standard: IEC 60204-1 Cable entry into cabinets: From below PLC communication: Profinet Field communication: Ethernet TCP/IP PLC software: TIA Portal Operator computer: Desktop computer with monitor Compressed-air pressure: 6 bar Air consumption during web threading: 4500 Nl/min Air consumption during normal operation: 700 Nl/min Air consumption during the change cycle: 2000 Nl/min Cable routing: In floor ducts Operating temperature: +15°C to +40°C Storage temperature: +25°C to +55°C Relative humidity: Below 80% Maximum operating altitude: 1000 m Equivalent continuous sound pressure level LEQ: Below 85 dB A-weighted sound power level LWA: Below 83 dB Installed drives: Transmission roller, S-wrap roller, slitting unit, SUS roller, accumulation shaft The machine comes from an industrial nonwoven production facility and is offered as shown in the photos. A detailed PDF with the complete technical specification of the machine is available upon request. We will be happy to provide it to seriously interested customers. Additional photos and further information are also available upon request. Price: on request / negotiable. Please contact us for further information.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Precision winding machine for films and web materials. Designed for consistent unwinding, guiding, and rewinding of roll materials. Integrated safety system with protective glazing, laser start position indicator (green), emergency stop switches, and pneumatic film guiding. Machine frame made of steel, electrically controlled drive. Ideal for production lines in coating or laminating technology. Kodpfx Aoxzuiyobvonc

Condition: new, functionality: fully functional, Year of construction: 2026, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Knodpshwaa Eofx Abvsc Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, Year of construction: 2014, functionality: fully functional, product width (max.): 1,400 mm, Roll winding, laminating, printing, and folding machine for sale. -Two printing units with chamber doctor blade system. -Cassoli calender with sleeve embossing. -Film laminating, folding machine with triangular fold. -Packaging machine for rolled goods up to 1400 mm wide. -A Hugo Beck packaging machine for the folded products is also for sale. Further details can be found in the images. Ksdsz Rn A Ropfx Abvjnc

Year of construction: 2013, operating hours: 700 h, condition: excellent (used), functionality: fully functional, Used Westeria Airtrack 1 Tracked Windsifter Year 2013 700 Hrs 2000mm wide feed belt / rotating drum Heavies Belt / Lights Belt Volvo Diesel / Electric Generator Driven Kodpfx Abjyyxx Esvjnc 19,000 kgs Very Nice Unit Fully Serviced & Ready To Go Straight To Work

Condition: used, machine/vehicle number: H2X386V04722, Year of construction: 2019, operating hours: 25,272 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Knodpfez S Nq Ssx Abvjc Load capacity: 1,800 kg Lifting height: 6,075 mm Fork carriage adjustment range: 350–1,050 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Battery type: 5 PzS Battery year of manufacture: 2023 Battery voltage: 48 V Battery capacity: 625 Ah Rest voltage: 51.3 V Dimensions and weight Dimensions (L × W × H): 3,200 × 1,150 × 2,761 mm Own weight: 3,800 kg Operating hours: 25,272 h Service valid until: 07/2027 UVV (Occupational Safety) valid until: 07/2027 EQUIPMENT 3rd and 4th valve Formerly a Linde full-service machine Facelift model with tilt angle indicator Fork carriage with side shift Lateral fall-through protection, easily removable White, non-marking tires LED work light at the front LED work light at the rear Road traffic lighting with turn signals Safety light at the front Safety light at the rear Comfort seat with lumbar support Seat heating All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on-site is possible. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 157

Condition: used, Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 60 rpm Kjdpfxedkzv Eo Abvenc -Power: TA = 5 Nm -Construction: B3 -Shaft: Ø 25 mm -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 700/225/H210 mm -Weight: 30 kg

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: PET09622A, Automatic winding and packaging machine for flexible spiral hoses, pipes, corrugated hoses, and hoses with an outer diameter of 8 mm to 40 mm. After winding, the coil is wrapped with stretch film and, if necessary, automatically labeled by the label printer. The total of six loading units are loaded with hose sections and wound up one after the other. The package includes a wide range of spare parts. These include: Omron servo axle drives, trailing cables for drives and valve terminals, various pneumatic components, drive belts, sensors, etc. Capacity: 60 coils/hour Knodpfxswd Emwj Abvjc Min. inner diameter of coil: 200 mm Max. inner diameter of coil: 380 mm Max. outer diameter of coil: 850 mm Min. width of coil: 120 mm Max. width of coil: 340 mm The technical data sheet can be found below the images; the operating instructions are attached.

Year of construction: 2021, condition: like new (used), functionality: fully functional, Component 1: ATM-800 P Tangential Dereeler (2 pieces) Heavy-duty dereeler for controlled unwinding of copper wire coils. Knodpfx Ajz Ap R Ijbvsc • Max. coil diameter: 800 mm • Max. coil width: 300 mm • Pickup hole: Ø52 / Ø56 mm • Max. coil weight: 300 kg • Braking force: 100 - 2000 N • Brake torque: 3 - 800 Nm • Max. speed: approx. 5 rpm • PLC control with torque sensor Component 2: HBK-40-S Automatic Taping Machine Professional automatic taping machine for coil and conductor insulation. • Servo-controlled taping head • Operator terminal and display • Integrated X-axis guidance • Electric hysteresis brake • Automatic overlap control via encoder • Suitable for various insulation materials

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 101022-76F, type of input current: three-phase, overall weight: 2,000 kg, input voltage: 380 V, Up for sale is a high-performance BOPP Slitting and Rewinding Machine manufactured by KUO GANG MACHINERY CO., LTD (Model: KG-201). This versatile industrial machine is specifically engineered for precision slitting and high-speed rewinding of BOPP adhesive tapes, packaging tapes, and various plastic films. Built with a robust mechanical frame, it offers high stability, precise tension control, and reliable continuous operation, making it an ideal choice for packaging manufacturers, tape converters, and printing facilities. The machine is in fully complete condition and comes equipped with an extended discharge/loading framework and auxiliary support structures. Knsde Admamjpfx Abvoc Features & Capabilities: Precision Slitting & Rewinding: Designed to handle BOPP rolls with clean edge-cutting and neat rewinding finish. Adjustable Speed Control: Smooth operational speed adjustment up to 100 m/min for optimized production cycles. Heavy-Duty Construction: Solid steel frame designed to minimize vibration during high-speed runs. Integrated Extension Bench: Includes extended feeding/discharge rails and support tables for convenient material handling and core loading. Easy Maintenance: Simple access to slitting blades, roller guides, and drive systems for minimal downtime.

Year of construction: 2013, condition: used, Number of winding stations: 36, operating voltage: 400V, current: 30A, frequency: 50Hz. Equipment: Fastflex, Digicone. Inspection possible by appointment. Knodpfe Aalpfex Abvjc

Condition: used, Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 25 rpm -Power: TA = 8 Nm -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 360/140/H185 mm -Weight: 14.4 kg Ksdpfx Aec Uz H Dobvonc

Condition: used, Year of construction: 2006, functionality: fully functional, mandrel diameter: 76 mm, roll diameter: 1,250 mm, product width (max.): 2,000 mm, Web width 2000 mm Unwinding diameter 70 / 76 Parent roll diameter 1250 mm Knjdpfx Aezvx Uvsbvjc Weight of parent roll 2000 kg Rewinding diameter 76 Maximum roll weight 400 kg Minimum core length 40 mm Number of spindles 2 Speed up to 600 m/min Power consumption 70 kW Material PE / PP, 13-300 µm

Condition: used, Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor Kjdedkzv Depfx Abvsnc -Speed: 22.5 rpm -Performance: TA = 120 Ncm -Shaft: Ø 30 x 105 mm -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 350/290/H195 mm -Weight: 22 kg

Year of construction: 2015, condition: ready for operation (used), machine/vehicle number: Nº 6 Y Nº 7, Equipment: CE marking, WINDLASER LS1626 Plus 150 W Industrial CO₂ Laser Machine Approximate working area: 2,600 × 1,600 mm – Complete equipment, ready for production Unit price per machine: €7,900 + VAT For sale: WINDLASER LS1626 Plus 150 W industrial CO₂ laser cutting and engraving machine, currently in operation at our facilities and available for demonstration before dismantling. The machine is being sold exclusively due to a technological upgrade, following the introduction of new, state-of-the-art RF industrial laser equipment. It is equipped with a professional Ruida DSP controller, RDWorks software, and comes with a computer, fully configured for immediate operation. Its large working area of approximately 2,600 × 1,600 mm allows for the comfortable machining of entire MDF, HDF, plywood, acrylic, cardboard, leather, foams, rubbers, and other non-metallic materials. The machine incorporates a fully operational 150 W RECI laser tube, and is also supplied with a brand new 150 W RECI laser tube, providing the buyer with a significant reduction in future maintenance costs. Included equipment The price includes: • WINDLASER LS1626 Plus 150 W industrial laser machine. • Approximate working area of 2,600 × 1,600 mm. • Ruida DSP industrial controller. • Computer with RDWorks installed and configured. • S&A CW-6000 industrial chiller. • Installed and functioning RECI 150 W laser tube. • Brand new RECI 150 W replacement laser tube. • Complete new optical head. • Two spare high-voltage power supplies. • Three industrial fume extractors. • New cable carrier chain. • Various additional spare parts. _____ Materials that can be processed Ideal for cutting and engraving: • MDF • HDF • Plywood • Acrylic (PMMA) • Cardboard • Leather • Rubber • Technical foams • Non-metallic plastics • Other materials compatible with CO₂ laser technology Knedpfx Abezmqa Esvsc A purchase with guarantees The machine can be seen in operation before dismantling. The buyer can personally verify its operation, precision, speed, and cutting quality, acquiring industrial equipment ready to continue producing from day one. _____ More than just a used machine It is delivered as a complete industrial production system, including strategic spare parts and high-value accessories that significantly reduce future maintenance costs, minimize the risk of production downtime, and allow you to start manufacturing from day one with complete confidence.

Condition: used, Weiss Kodpfx Abezachcjvenc Type: SWT 600/800-S Spray Water Test Unit for IP protection tests IPX1 / IPX2 / IPX3 / IPX4 / IPX4K / IPX9K For sale is a professional spray water test unit from Weiss Umwelttechnik GmbH. The unit is used to perform standardized water, spray water, and ingress protection tests on components, housings, electronic components, vehicle parts, and technical products. Suitable for industry, automotive, electronics, quality assurance, development, testing laboratories, as well as research and material testing. Operation is via an integrated touch panel. Test sequences can be automated. The unit features a stainless steel test chamber, rotating test table, swivel arm, water circulation, and available test accessories. Technical data according to the nameplate / documentation: Electrical data: Voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Wiring diagram No.: 82962 CE marking available Water connection according to documentation: Water inlet: R 3/4" Water outlet: R 1 1/4" Water pressure supply line: approx. 2 – 6 bar Water pressure IPX9K: adjustable approx. 80 – 100 bar Turntable speed: approx. 1 to 5 RPM Swivel speed: approx. 60 °/s Permissible ambient temperature according to documentation: approx. 10 °C to 35 °C Dimensions and weight: Test chamber SWT 600/800: approx. 2350 x 2400 x 2650 mm with hinges and door lock Test chamber without hinges and door lock: approx. 2350 x 2400 x 1850 mm Weight of the test chamber: approx. 650 kg High-pressure unit: approx. 850 x 1200 x 800 mm Weight of the high-pressure unit: approx. 380 kg Total weight according to available data: approx. 1030 kg Noise level according to documentation: approx. 88 dB(A) Heat dissipation to the environment: average approx. 1 kW maximum approx. 3.5 kW Equipment: Touch panel Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Nozzle ring / spray ring High-pressure unit Flow meter ESD earthing point CE marking Robust industrial design Available documentation: Operating manual EC declaration of conformity Quality test certificate Technical documentation as shown in the pictures Accessories include, among others, as shown in the pictures: Various spray and test components Nozzle ring / spray ring Swivel arm accessories Flow meter Connection components Tools / keys Test accessories Documentation and documents Inspection and testing on site is possible and desired after prior appointment. Scope of delivery: Weiss Umwelttechnik SWT 600/800-S Spray Water Test Unit High-pressure unit Turntable / swivel arm Test and spray accessories as shown in the pictures Operating manual / documentation Accessories and components as shown in the pictures Condition: Used Optical condition see pictures Scope of delivery as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale We will be happy to answer any further questions by telephone.

Condition: used, Henkel   UVALOC 400 Loctite 97039 Curing Chamber The UVALOC 400 curing chamber (LOCTITE 97039) is a surface irradiation curing system developed for curing light-curing adhesives using UVA radiation and visible light. It is suitable for manual curing of individual parts during the manufacturing process as well as for laboratory use.   The device integrates the following: a control unit with an integrated mains switch and operating hour counter a lamp housing with the burner reflector igniter. With UV protection box.   Features:   Contains a 400 W metal halide lamp Optimized for light output in the UVA range Typical curing area 10 x 19 cm Expected UV lamp life up to 1000 hours The power supply can be disconnected from the lamp module and operated separately Adjustable lamp height for optimal irradiation With glass filter to prevent short-wave UVB/UVC emission   Kodpfxozg Exps Abvjnc Technical data: Mains connection 230 V AC ± 4%, 50 Hz Power consumption approx. 460 W Mains fuse 2 x 5 A, slow-blow Glass tube fuse 5 x 20 mm Warm-up time for the UV lamp 3 minutes Lamp type 400 W high-pressure metal vapor lamp with double-ended base Lamp life approx. 1000 hours Intensity See section 5.1 Dimensions (width x height x depth): 220 mm 472 mm 300 mm Ambient and operating temperature + 10 °C ... + 30 °C Storage temperature - 10 °C ... + 60 °C Weight ~ 11.5 kg   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, machine/vehicle number: FN597668, Year of construction: 2019, operating hours: 6,532 h, load capacity: 3,000 kg, lifting height: 4,000 mm, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,000 mm Fork length: 1,200 mm Fork spreader: 550–1,720 mm MACHINE DETAILS Mast: Free-lift mast without a central hydraulic cylinder Machine type: Electric forklift Year of battery manufacture: 2017 Battery voltage: 80 V Battery capacity: 775 Ah Rest voltage: 84.1 V Dimensions & Weight Dimensions: 3,900 × 1,250 × 2,620 mm Own weight: 5,200 kg Service valid until: 07/2027 UVV certification valid until: 07/2027 Knjdpfx Abez S Nqfovoc Operating hours: 6,532 h EQUIPMENT Former Jungheinrich full-service unit 3rd and 4th valve Free-lift mast Fork spreader with side shifter Full cabin Heater Windshield wiper LED work light (front) Comfort seat All dimensions are approximate values. No warranty is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck available on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 140

Condition: used, Jürgen Jahn Sorting System SGJ 450 Complete feeding and sorting system housed in a high-quality soundproof enclosure, which significantly reduces the noise level in the production facility. Kedpfoz E Rt Hsx Abvsnc Manufacturer: Jürgen Jahn Sorting and Feeding Technology GmbH Enclosure type: Aluminum system profile frame construction Noise protection: Integrated soundproof enclosure with high-quality dimpled foam lining Accessibility: Maintenance doors with handles for quick access to the sorting technology Overall dimensions of enclosure: 1300 mm x 1200 mm (width x depth) Component 1: Vibrating spiral conveyor (drive & hopper) Drive model: SGJ 450 Hopper diameter: 450 mm Capacity (volume): 3 dm³ (3 liters) Connection voltage: 230 V Current consumption: 4 A Operating frequency: 25 Hz (optimized for heavy metal or stamped parts) Component 2: Linear conveyor (discharge section) Rail model: LFJ 4 Function: Precisely timed buffering and forwarding of the sorted components Connection voltage: 230 V Current consumption: 1 A Operating frequency: 50 Hz Level monitoring: Integrated optical sensor (manufacturer: ifm) for automatic monitoring of blockages and minimum quantities on the linear rail The system is ideal for the automatic alignment, sorting and feeding of bulk materials such as stamped parts, screws, brackets or similar metal and plastic components. The matching control units (regulators for hopper 25 Hz / linear rail 50 Hz) can be purchased separately from us. Please contact us if you are interested. "Everything from one source: We will be happy to offer you suitable bank financing for your project." More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1975, functionality: fully functional, total width: 1,900 mm, roll diameter: 1,800 mm, overall weight: 3,100 kg, product width (max.): 1,900 mm, input voltage: 440 V, Slitter rewinder 190 wide DC motors Shaftless input with hydraulic platform to raise the web, the system supports core sizes ranging from 3 inches up to 12 inches and processes of 150 to 1900 mm width webs, output core sizes ranging from 3 to 12 inches  Kodpfxsy Ufkqj Abvsnc

Condition: used, Year of construction: 2006, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension length: 1,000 mm, inner dimension width: 600 mm, inner dimension height: 600 mm, total length: 1,670 mm, total width: 1,700 mm, total height: 1,800 mm, overall weight: 800 kg, number of chambers: 1, Equipment: CE marking, Protective gas annealing furnace, Vötsch type VAW 60/100 • Rated temperature: 750 °C • Power: 22 kW • Connected load: 24 kVA • Usable dimensions: 600 x 600 x 1000 mm (width x height x depth) Can be inspected while energized. Kodpfx Abjz Azauevenc

Condition: like new (used), Year of construction: 2023, functionality: unexamined, machine/vehicle number: 230101, Ladies and Gentlemen, on behalf of our customer, we are selling the model ES-950SF ELCOMA wrapping machine described and photographed here. We will be pleased to provide you with the exact specifications for this winding machine by e-mail. Knedpfx Ajrvz R Debvoc Also available via WhatsApp. This is an advertisement for information purposes only. The purchase contract can only be concluded at the specified location of the purchased item.

Condition: used, RS Simulators Type: TS 600/45 RS Simulators Temperature Test Chamber, Water-Cooled Temperature Range: -40°C to +180°C Test Chamber Dimensions: Width 850 mm x Height 850 mm x Depth 800 mm External Dimensions: Width 1100 mm x Height 1850 mm x Depth 1500 mm Kjdpfx Abszdn Stovenc Power Consumption: 13.5 A Refrigerant: R404A Connection Voltage: 3x400V/N/PE 9A Weight: approx. 800 kg Explosion-proof operation not tested However, max. 160°C in this condition Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2016, For sale: three professional wrapping robots for flexible and efficient pallet wrapping. Available from stock: a Cyklop CSM Robot PRS from 2016, a Cyklop GL robot from 2013, and a Robopac S6 from 2017. All machines are suitable for various pallet sizes and ideal for companies that require flexibility and reliability in their logistics process. Cyklop CSM Robot PRS This mobile wrapping robot from 2016 is equipped with a new battery from 10-2024 and operates completely independently around the pallet. Key features: - Mobile wrapping robot suitable for all pallet sizes - Powered pre-stretch system for efficient film saving - Automatic height detection - Adjustable wrapping programs - Ready for immediate use thanks to the new battery - €3950 Cyklop GL robot A compact and reliable wrapping robot that is very suitable for variable pallet dimensions and irregular loads. Key features: - Flexible application for various pallet types - Simple operation - Suitable for intensive daily use - Suitable for nets - New batteries - €3450 Robopac S6 A modern and powerful wrapping robot with extensive setting options. Key features: - Advanced wrapping programs - Suitable for high wrapping heights and variable loads - Reliable and stable operation - Equipped with a film cutter, which cuts the film at the end of the wrapping cycle - €3950 Condition of the machines All three machines are in good condition, fully functional, and ready for immediate use. Videos of the machines can be sent via WhatsApp. Kjdpfx Abszbyc Tsvonc We also supply wrapping film. For more information, please feel free to contact us. Trade-in of a (defective) pallet wrapper is possible. See also my other advertisements. Film wrapper, pallet wrapper, wrap machine, wrapping machine, pallet wrapping machine, wrapper, robot wrapper, wrapping robot, robot wrapper, wrapper, film, wrapper.

Year of construction: 2017, condition: ready for operation (used), Six identical Demsan fabric doubling and winding machines are offered. Max. fabric width: 2000mm, fabric infeed: from roll and in open width, fabric delivery book/roll: 1000mm, double folded, max. operating speed: 60m/min, operating direction: forward, control: Hitech touch panel. Machine dimensions X/Y/Z: 4000mm/3100mm/2600mm, weight: approx. 2390kg. Equipped with fabric tension control, electronic length measuring system with encoder, calibration function, RS-232 interface, end-of-fabric photocell, photocell-controlled fabric catcher and centering system, dancer roller mechanism, Argox thermal printer, photocell-controlled edge guiding system, motorized fabric guide adjustment, AC geared motors, frequency converters and pneumatic opening unit. Four machines were manufactured in 2017, and two machines were manufactured in 2016. Documentation available. Inspection possible by arrangement. Knjdpfx Abszta Eqevjc