Used Lime for sale (111)

Condition: used, Year of construction: 2023, Operation Spreading vane set TS20 left + right Hydro drive left + right with Auto TS / and FlowControl Main disk left + right with AutoTS Pipe protection bracket Rolling and parking device swiveling Working light Tilt sensor f Weighing system / 16 pcs EasyCheck- Hfedpet A Tzwefx Airsl

Condition: used, Year of construction: 2023, Main window right/left with Auto TS roll guard L tell device / swivel, factory-fitted Inclination sensor f Weighing system elect. / Profis weighing system built-in parts f ZA basic units LED / Rear lighting manual Hjdpst A Udgofx Airjfl

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902037031, empty load weight: 4,795 kg, maximum load weight: 30,320 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2025, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,040 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, color: grey, These images are archive images! The vehicle may still be in use! Fine-grain steel welded construction, in basic lightweight design, kingpin plate with replaceable 2" kingpin, Curved front end "Patented" 24-ton, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Support wedges with holder Underrun protection, foldable Hedpey Rrplefx Airjfl Half-shell fenders Integrated "fender holder," surface resistant to stone chipping with anti-splash flaps only on the last axle Tarpaulin rod with holder Towing hook at the rear (not on Revolution model) Axles + Suspension SAF disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assistance, activated by "3x braking" (starting assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) "Hot-dip galvanized lift axle mechanism" Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line 24-volt EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Automatic tilting lowering with shut-off valve "TPMS" tire pressure monitoring system - display on the tractor unit, via EBS, without truck installation (the truck must have the necessary prerequisites. Only on base tires). Wheels and tires 385/65 R22.5" Steel rims Electrical system 24 volts, multi-chamber lights in LED, yellow LED lighting on the sides, license plate lighting in LED (Note! with certain tractor units, false diagnoses may occur, although the function is given) Yellow LED lighting on the sides linked to the turn signal "flashing side lights" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED 2 x 7-pole and 1 x 15-pole fail-safe sockets at the front, without connecting cable Additional LED work light, integrated and recessed at the rear, switched via reversing light Hydraulics Low-pressure cylinder max. 170 bar Operation hydraulically via truck auxiliary drive Bins Aluminum box body made of high-quality, abrasion-resistant material. Sloping front wall, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, cleanly welded, with top rail profile that prevents spillage. Inside with access ladder on the front wall (not in conjunction with Cramaro). Shovel and broom holder outside on the front wall. Greenline - conical and aerodynamic bin shape "Membrane" - rear wall Rear wall as a hinged flap with "double-hinge hinge," externally mounted with double hook lock. Rear wall with rubber seal Floor continuous, 6 mm thick Standing platform with access ladder, connecting plate for air/electrical and brake connections with large clearance for optimal operability. Roll tarp, can be folded to the right side, with central locking on the left side Operating instructions For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chrome plated piston rod, so that it is not attacked and rusted by the material.

Condition: used, Year of construction: 2024,

Year of construction: 2021, condition: used, We are now selling our exhibition machine Terra-Star Powrline TSP.224. The separator has accompanied us at trade fairs and exhibitions and is currently on its first rental assignment. Equipped with block disc shafts, which are designed for processing cohesive soils, breaking up soil clumps, and mixing in additives such as lime or mixed binders. When all other separators fail, block disc shafts always keep things moving. The separator can be mounted on excavators and wheel loaders. Price is without adapter. We are happy to discuss options and alternatives for your construction site. Suitable for excavators from 38 t Hjdpfx Aioyf Aqhsrsfl Suitable for wheel loaders from 20 t Weight in kg: 4100 Throughput: 100-160 m³/h Drain line required: 1 Series: TSP.224.003

Condition: used, Year of construction: 2024, Basic hopper / ZA-V Easy spreader unit / warning sign foiling / 910 mm PTO shaft / with friction clutch / S 1400 hopper extension, welded / factory-fitted / S mud flap / LED lighting to rear / Easy operating computer Hfsdpfx Aiouhp Eherel

Condition: used, Year of construction: 2022, Documentation in German Spr Type plate PTO shaft 910 mm with / friction clutch Container attachment L 3200 swivel mounted ex works Mud flaps L / and ladders LED lighting to the rear for road travel Roll-up tarpaulin L / with manual operation Hfodjrxr R Sepfx Airjl

Condition: used, Year of construction: 2016, functionality: fully functional, A flexible induction bending machine (Liming Electrical & Machinery Factory) for bending and curving tubes (pipes), box sections, wide flange beams, and channels. This 30” capacity induction bending machine was installed in 2017 at our works in Oldbury in the UK. THE MACHINE CAPACITY: Hsdpeupia Nefx Airsfl Tube / Pipes From Ø165 up to Ø762 6" up to 30" (USA) Beams (easy way & hard way) IPE 600 & HEB 600 W27 x 178 (USA) Box Sections 100 x 100 up to 500 x 500 4" x 4" up to 20" x 20" (USA) Channels UPN 50 up to UPN 400 C6 x 8.2 up to C15 x 50 (USA)

Year of construction: 2022, condition: used, Terra-Star Powerline TSP.184, cutting width 1800mm, the machine's four shafts ensure extremely high throughput! Equipped with M80X mixing shafts, armored in the wear zones – resulting in a particle size of 0-60/80 mm. Suitable for mixing in lime and binders, breaking up clumped materials, and separating stones, branches, roots, etc. Fitted with a fully hydraulic OQL310 wheel loader mount (not included in the price). The loader mounting can be changed at any time, and an excavator adapter can be combined if required. Price without adapter For excavators from 32 t For wheel loaders from 17 t Weight (kg): 3100 Throughput: 78–120 m³/hr Leak oil connection required: 1 Hfjdpsyf Arfjfx Airsl Series: TSP.184.021

Condition: used, machine/vehicle number: 19755, Fertilizer spreader mechanical Hydraulic shutter slide, 2-way unit Hopper extension / PTO shaft / Hfsdpfx Aor Hn D Neirsl

Year of construction: 2025, condition: like new (used), Separator Terra-Star TSC.134, used, year of manufacture 2025 Maintenance-free, screening line 0- mm, mixing blocks M80X wear zones armoured with hardfacing wire. Application with mixing shafts: Mixing in lime or binding agents to dry soil, blending with compost, sand, other soils, etc. while simultaneously crushing soil clods. Aerating, shredding, tearing, and turning biomass, organic waste, and compost while simultaneously separating out branches, roots, etc. that cannot be shredded. Crushing friable stones from construction debris such as pumice, bricks, Poroton, while simultaneously separating pieces over mm in size; larger and hard parts remain in the separator. Feeding clumpy soil into a screen reduces waste and increases throughput. Equipped with OQ70/55. Price does not include adapter plate. For equipment returned from rental, the machine is inspected and comes with a 12-month warranty. Hedsyf Atvspfx Airefl For excavators from 12 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 50 m³/h Drain line connection required: 2 Series: TSC.134.018

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.154, cutting width 1500mm. With its 4 shafts, the machine offers an enormous throughput! Mixing in lime or binding agents to dry the soil, blending with compost, sand, or other soils, etc., while simultaneously breaking up soil clumps. Aerating, shredding, tearing apart, and turning over biomass, organic waste, and compost, while simultaneously separating out branches, roots, etc., that cannot be shredded. Crushing brittle construction materials such as pumice, bricks, and Poroton blocks, while at the same time separating out fragments (mm); larger, harder pieces remain in the separator. Feeding clumped soil into a screening plant reduces waste and increases throughput. Hfedpfjyf Arljx Airol Price without adapter! For excavators from 24 t For wheel loaders from 13 t Weight (kg): 2300 Throughput: 64 - 95 m³/h Leak oil connection required: 1 Series: TSP.154.124

Condition: used, functionality: fully functional, mileage: 390,738 km, power: 334.65 kW (455.00 HP), fuel type: diesel, next inspection (TÜV): 03/2027, Year of construction: 2020, Mercedes-Benz Arocs 3246 LK 8x4 - Feldbinder construction material silo, 22,000 liters Equipment  Steerable and liftable trailing axle  Air suspension, rear axle  Air conditioning  Comfort driver's seat  Multimedia radio with touchscreen  CB radio  Reversing warning system  Reversing camera  Construction site filter / off-road version  ABS / ASR / EBS  Disc brakes all around Special features  Feldbinder silo permanently installed  Vehicle in very good condition  Austrian vehicle  Immediately ready for use  Ideal for transporting cement, lime, dry mortar, and construction materials Hfedpfxjzu Iw Rj Airsl Errors, changes, and prior sale are subject to change. Sale is made without warranty and with exclusion of liability for defects.

Year of construction: 2025, condition: excellent (used), Separator TSP.155 The separator features five shafts, providing more space within the unit for the material to be loosened along the running/rotational direction of the shafts. The shafts are arranged in the housing at a 15° angle to each other, creating a progressive rounding effect as material is guided into self-rotation even before full engagement. This results in a significantly higher throughput and improved material quality compared to units with fewer shafts. Shafts BS252 Equipped are BS252 block disc shafts designed to break up very wet and stubbornly compacted soils, crush clods of earth, and efficiently mix additives such as lime or compound binders at high throughput rates. With this configuration, the Terra-Star enables soil processing long after other equipment would need to be withdrawn from use. For excavators from 27 tons Weight in kg: 2700 Throughput: up to 120 m³/h Leak oil line required: 1 Series: 252 Hodpeyvrzxjfx Airefl

Year of construction: 2026, condition: like new (used), Disintegration, crushing, and mixing with grain size of 0-60/80 mm. For soil conditioning and mixing in lime, mixed binders, sand, compost, or other soils. Crushing and disintegration of soil clods, separation of stones, branches, roots, etc., with particle size 0-60/80 mm. Aerating, crushing, shredding, and turning of biomass, organic waste, and compost. For applying lime, we also offer a binder dosing unit in the program, available with a weighing system. The separator comes from a short-term rental and shows minimal signs of use. Fitted with a Likufix SW48 adapter – can also be modified to suit your requirements. Price without adapter. Suitable for excavators from 16 t Hsdpfxeyf Autj Airefl For wheel loaders from 8.5 t Throughput: up to approx. 65 m³/h Drain line connection required: 1 Series: TSC.154.342

Year of construction: 2025, condition: used, List price €34,000 Breaking up, crushing, mixing particle size 0-60/80 mm For soil conditioning, mixing in lime, stabilizing agents, sand, compost, and other soils. Crushing and breaking up soil clods, separating stones, branches, roots, etc. Particle size 0-60/80 mm Aerating, crushing, shredding, turning biomass, organic waste, and compost For lime application, we also offer a binder spreader in our range, available with weighing system. The separator comes from a short-term rental and shows minimal signs of use. Price without adapter. The surcharge for the lightly used OQ70/55 is €4,250 For excavators from 16 t For wheel loaders from 8.5 t Hodpfxeyf Ar Ss Airjfl Throughput: up to approx. 65 m³/h Drain oil connection required: 1 Series: TSC.154.326

Year of construction: 2020, condition: excellent (used), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss ClimeEvent Climate Test Chamber, Water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load capacity: designed for a maximum load of 250 kg Specifications for temperature testing: Temperature range: -55 to +180°C Temporal temperature fluctuation at chamber center: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Heating compensation: max. 8000 W Specifications for climate testing: Temperature range: +10 to +95°C Humidity range: 10 to 98% RH Hfsdpoziiypjfx Airol Climate performance data (excerpt) Humidity range: 10 to 98% relative humidity (RH) Humidity deviation (temporal): At chamber center, in steady-state condition, depending on climatic setting: ±1 to ±3% RH Temperature deviation (temporal): At chamber center, in steady-state condition, depending on temperature: ±0.1 to ±0.3 K Temperature uniformity (spatial): Relative to the setpoint (in the range > 20% RH): ±0.5 to ±1 K Operational data: LED strip: 24 V, 6.8 W / 2 x Halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10%, 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A Chamber is equipped with Greenmode Weight: approx. 2050 kg Buyer Safety Information! The following steps are performed on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. Upon successful testing, chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and error!) For further questions, we are happy to answer your call.

Year of construction: 2018, condition: excellent (used), Vötschtechnik ClimeEvent C/340/70/5 Climate Testing Chamber -60 °C to +180 °C Description: For sale is a high-quality climate testing chamber from Vötschtechnik GmbH, model ClimeEvent C/340/70/5, manufactured in 2018. This unit is suitable for demanding temperature and climate tests in laboratories, research institutions, development departments, and industrial quality assurance. Thanks to the large test chamber, the powerful refrigeration system, and the precise temperature and humidity control, the system is ideal for material, electronics, and long-term testing. The water-cooled design ensures reliable operation even under high-performance requirements. Technical Data: Manufacturer: Vötschtechnik GmbH Model: ClimeEvent C/340/70/5 Equipment Type: Climate Testing Chamber / Temperature Testing Chamber Test Chamber Volume: approx. 340 liters Temperature Range: -60 °C to +180 °C Temperature Change Rate: Heating: approx. 7.5 K/min Cooling: approx. 8.2 K/min Maximum Heat Compensation: approx. 3,000 W Temperature Deviation (time-based): ±0.1 to ±0.5 K Temperature Homogeneity: ±0.5 to ±1 K Temperature Gradient: ≤2 K Climate Range: Temperature: +10 °C to +95 °C Humidity: 10 to 98 % RH Dew Point: -3 °C to +94 °C Refrigerant: R449A – 2.50 kg R23 – 0.75 kg Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 9 kW Rated Current: 20 A Sound Pressure Level: approx. 57 dB(A) Design: Water-cooled Dimensions (approx.): External: 1,830 × 900 × 1,890 mm (H × W × D) Internal: 750 × 580 × 765 mm (H × W × D) Weight: approx. 650 kg Equipment: Color Touchscreen Control Stainless Steel Test Chamber Interior Lighting Large Viewing Window Water-Cooled Refrigeration System Side Cable Entry Multiple Insert Levels Ethernet Interface USB Interface Extensive Accessories as Shown in Photos Areas of Application: Temperature Testing Climate Testing Environmental Simulation Material Testing Electronics Testing Automotive Aerospace Research & Development Quality Assurance Aging and Stress Testing Condition: Used The unit is in good condition with typical signs of wear and tear consistent with its age. Scope of Supply: Vötschtechnik ClimeEvent C/340/70/5 Accessories as Shown in the Images Service Shipping: Hodpfsz Aicwex Airjfl Inspection possible by appointment. Loading onto a truck can be arranged. Europe-wide shipping via freight forwarder possible for an extra charge. Subject to prior sale and errors.

Year of construction: 2018, condition: excellent (used), Vötschtechnik ClimeEvent C/480/70/15 Climate Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/480/70/15 Machine Type: Climate Testing Chamber / Temperature Testing Chamber Test Chamber Volume: approx. 480 liters Temperature Range: -72 °C to +180 °C For sale is a used Vötschtechnik ClimeEvent C/480/70/15 climate testing chamber in a water-cooled version. Suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development, aging, and stress tests. Temperature and humidity profiles, as well as automatic test programs, can be executed via the touchscreen control. Technical Data: Test Chamber Volume: approx. 480 liters Temperature Range: -72 °C to +180 °C Heating Rate: approx. 16 K/min Cooling Rate: approx. 21 K/min Max. Heat Compensation at +20 °C: approx. 8,000 W Climate Range: +10 °C to +95 °C Humidity Range: 10 to 98 % RH Dew Point Range: +4 °C to +94 °C Refrigerant: R449A / R23 Refrigerant Quantity: 4.00 kg / 2.30 kg Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 24 kW Rated Current: 43 A Cooling: Water-cooled version Cooling water inlet and outlet Connection for demineralized water Overflow and condensate drain Dimensions: External dimensions according to the installation plan (W × D × H): approx. 2,807 × 1,000 × 2,020 mm Transport dimensions including overhangs (L × W): approx. 2,857 × 1,115 mm Equipment: Touchscreen control / WEBPanel Program and manual test operation Temperature and humidity control Stainless steel interior Viewing window Test chamber lighting Shelves / insertion levels Side test chamber openings RS232, RS485 / RS422 and USB Status, alarm and maintenance display Program management and report function Transport Data: Transport dimensions: approx. 2,857 × 1,115 × 2,020 mm Weight according to model series documentation: approx. 1,350 kg Shipping by freight forwarder possible Condition: Used Workshop tested Optical condition according to the pictures. Scope of delivery: Hodpfxoz Air Sj Airefl Vötschtechnik ClimeEvent C/480/70/15 Shelves according to the pictures Existing documentation / operating manual Accessories according to the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Year of construction: 2018, condition: excellent (used), Vötschtechnik ClimeEvent C/480/70/15 Climate Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/480/70/15 Machine Type: Climate Testing Chamber / Temperature Testing Chamber Test Chamber Volume: approx. 480 liters Temperature Range: -72 °C to +180 °C For sale is a used Vötschtechnik ClimeEvent C/480/70/15 climate testing chamber in a water-cooled version. Suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development, aging, and stress tests. Temperature and humidity profiles, as well as automatic test programs, can be executed via the touchscreen control. Technical Data: Test Chamber Volume: approx. 480 liters Temperature Range: -72 °C to +180 °C Heating Rate: approx. 17 K/min Cooling Rate: approx. 15 K/min Max. Heat Compensation at +20 °C: approx. 8,000 W Climate Range: +10 °C to +95 °C Humidity Range: 10 to 98 % RH Dew Point Range: +4 °C to +94 °C Refrigerant: R449A / R23 Refrigerant Quantity: 4.00 kg / 2.30 kg Mains Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 24 kW Rated Current: 43 A Cooling: Water-cooled version Cooling water inlet and outlet Connection for demineralized water Overflow and condensate drain Dimensions: External dimensions according to the installation plan (W × D × H): approx. 2,807 × 1,000 × 2,020 mm Transport dimensions with overhangs (L × W): approx. 2,857 × 1,115 mm Equipment: Touchscreen control / WEBPanel Program and manual test operation Temperature and humidity control Stainless steel interior Viewing window Test chamber lighting Shelves / Insert levels Side test chamber openings RS232, RS485 / RS422 and USB Status, alarm and maintenance display Program management and report function Transport Data: Transport dimensions: approx. 2,857 × 1,115 × 2,020 mm Weight according to series documentation: approx. 1,350 kg Shipping by freight forwarder possible Hfjdpfx Ajz Airfsirjl Condition: Used Workshop inspected Optical condition as shown in the pictures. Scope of Delivery: Vötschtechnik ClimeEvent C/480/70/15 Shelves as shown in the pictures Available documentation / Operating manual Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2006, functionality: fully functional, 2 pieces rotary valve dosing feeders ! Price per unit ! Manufacturer: Torex Model: RV20 Connection size inlet/outlet: 300 x 300 mm Overall height: 455 mm Hfodpfxoxd Duko Airjl Sealing strips made of rubber Bolted plastic lining of the individual compartments for improved discharge. Functionality has been checked! Bearings can be relubricated from the outside. Last used for dosing hydrated lime. Drive power: 1.5 kW Speed: 30.9 rpm

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 23352279, type of input current: three-phase, input voltage: 400 V, total width: 600 mm, total length: 1,600 mm, total height: 2,150 mm, overall weight: 460 kg, power: 5.5 kW (7.48 HP), compressed air connection: 6 bar, Equipment: documentation/manual, type plate available, SICK MCS 100FT/F CEMS System (2023) - Unused / Zero Hours - QAL1 Certified Available for immediate sale: A complete, unused (zero hours) Continuous Emission Monitoring System (CEMS) SICK MCS 100FT/F, manufactured in October 2023. This is a turn-key solution featuring advanced multi-component analysis technology. Key Technical Specifications: - FTIR Technology: Simultaneous measurement of SO2, NO, NO2, CO, CO2, HCl, HF, and H2O - FID (TOC) Analyzer: Integrated total organic carbon measurement - Zirconia Sensor: Integrated O2 measurement - Certification: Fully QAL1 certified (EN 15267 compliant) - Acid Mist Protection: Includes special cabinet with Acid Mist Absorber Box (ideal for H2SO4 protection during petcoke combustion) Complete Package Includes: Hfsdpfxoy A Nu Ae Airol - SICK MCS 100FT/F Analyzer Cabinet - Sampling Probe - 20m Heated Sampling Line - MEAC/DAU Data Acquisition System Condition: Brand New / Unused Availability: Immediate (Ex-stock) Ideal for cement and lime plants, refineries, and power generation facilities looking for a high-end upgrade without the manufacturer's lead time. FAT reports and technical manuals are available upon request.

Condition: used, Year of construction: 2023, Spreading disc set V-Set 1 3-way unit Boundary spreading unit Limiter V / pipe protection bracket S Rolling device pluggable Spreading unit ZA-V Hopper attachment S / 2000 PTO shaft with friction clutch Built-in parts for ZA basic units Mud flap S / LED lighting Hodpfx Aiot Dwh Rorofl

Condition: used, Year of construction: 2023, 3-way unit Boundary spreading system Limiter V Pipe protection bracket L Mechanical / position indicator Spreader ZA-V hopper extension S 2000 Built-in parts for / ZA basic units PTO shaft with friction clutch Strainer L and ladders / LED lighting to the rear Hfedpfx Ajt Dwibsirel

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,800 kg, type of input current: three-phase, input voltage: 380 V, total height: 4,500 mm, total width: 1,400 mm, total length: 1,400 mm, The lime feed system is one of the main components of the desulphurization system. This particular system is installed in one of the incinerators. The main challenge was to ensure that the top section could be removed using a forklift with a maximum lifting height of 3 meters. Hfsdpfx Aijzphdgjrjl Features: 1. A vibration motor is installed on the big bag mounting plate to improve lime dispensing. 2. The upper section is mounted on the hopper with a window, and the connection point is sealed. 3. A platform is provided for access to the window for opening the big bag. 4. The big bag is separated from the tray by means of a pneumatically operated valve. 5. The tray is suspended on strain gauges to monitor sorbent availability and adjust sorbent feed rate. 6. A level sensor is also included. 7. A mixer is installed in the tray. It also has a seal to prevent the sorbent from escaping the system. 8. The steel structure is designed to accommodate the installation of a screw conveyor. 9. The steel structure provides unobstructed access underneath for maintenance of the system components.