Used Log Crosscut Saw for sale (33,920)

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,300 mm, cutting width (max.): 1,300 mm, overall weight: 9,000 kg, workpiece weight (max.): 8,000 kg, saw drive: 11,000 W, The OBS1300 bundle cutting saw has been developed to optimize production in terms of time and efficiency when formatting material to the desired length. The presented machine is available immediately—viewings are welcome. Technical specifications: • Maximum bundle dimensions (width/height): 1300 x 1300 mm • Minimum bundle dimensions (width/height): 800 x 800 mm (hydraulic clamp operating limit—smaller bundles can also be cut) • Additional equipment enables cutting bundles with a minimum length of 600 mm • Maximum cut-off bundle length: 3000 mm • Maximum feed bundle length: 6000 mm • Maximum bundle weight: 8,000 kg • Cutting accuracy: +/- 2 mm Bjdpexn Rt Uofx Aacedi • Dedicated guide lubrication unit • GB TITANIUM cutting guide (rigid and robust, milled from a single steel block. Backward compatible with STHIL guides*) • STHIL RM404 cutting chain • 11 kW WEG guide drive motor • Fast measurement system with absolute encoder (retains position memory after power loss) and 0.2 mm positioning accuracy • Innovative strapping unit with intelligent system determining strapping point based on preset cut lengths • System of three sets of hydraulic clamps • Hydraulic system built using PONAR components • Crosswise infeed conveyor for loading bundles onto the machine • Intelligent unloading system with crosswise chain conveyor • Two pairs of tilting rollers (hydraulic) allowing large offcuts to freely fall onto the conveyor • TA DRIVE geared motors • HIWIN linear guides with increased load capacity • YHY Japan bearings • YASKAWA inverters and servomotor • 21-inch touchscreen operator panel • SIEMENS PLC controller (with remote access system) • Safety system and SICK brand sensors Warranty: 12-month warranty. Service response time: 24 hours. Spare parts and consumables warehouse. Machine supplied with: • Operating manual • Declarations of conformity • Warranty card • Electrical diagrams • Hydraulic diagrams

Condition: new, Year of construction: 2024, Automatic length measuring and positioning system for all STROMAB crosscut saws, as well as similar machines from other manufacturers. It serves both as a stop and for workpiece positioning. Consists of: Aluminium profile 105 x 90 mm, anodized Toothed belt drive 32 mm, reinforced with steel wire Stepper motor 6 Nm, multi-voltage 115 - 230 V, 50/60 Hz Repeatability +/- 0.1 mm Positioning speed 60 m/min Bdsdpfxsxrauco Aacsi SMART 7 Control Unit with 7-inch touch screen Absolute and incremental processing mode 8 pre-set standard values 2 software versions with different optimization levels available optionally. ZM 415 – Usable working length 4,500 mm ZA333 – Roller table 4,500 x 280 mm, RD 32 mm ZA341 – Front support 4,500 x 260 mm ZA373 – Locking cable for customer’s own crosscut saw

Condition: good (used), Crosscut saw, pull saw, miter saw, plunge saw -Remark: Unit made of slats/blinds production, without control Bdedpfxep Dydqs Aacoi -Saw blade: Ø 188 mm -Individual components: see photos -Dimensions: 1390/620/H1130 mm -Weight: 576 kg

Condition: new, Year of construction: 2025, Mobile chop station with extremely robust base, ready assembled and ready for use. Included special equipment: - Machine tiltable on both sides from the front - Circular saw blade HM 520x50 Z60 W neg. - Undercarriage mobile, especially stable Data of the machine: - especially due to constant zero point good when using measuring equipment and stop systems (miter and tilt!) - Powerful three-phase motor 5 kW with automatic Star-delta starting - stable guide arm with 4 ball bushings Bdsdpfx Aeb Nrg Ueacei for precise and safe preference - swiveling left 45 ° (miter) - swiveling right 65 ° (miter) - Tilt left 60 °, right 30 ° - Cutting width at 90 ° 420 mm - Cutting width for miter 45 ° 295 mm - Cutting height vertical 200 mm - Cutting height at inclination 45 ° 140 mm - Cutting height at inclination 60 ° 80 mm - for saw blade 520x50 mm - Suction nozzle 100 mm - Weight with stand 300 kg - CE and GS signs. dust tested - German quality product Data base: Extremely stable frame construction from large dimensioned profiles, powder-coated, sturdy steel carrying rollers with ball bearing high wall thickness galv. galvanized, sustainable Double-stop swivel castors with PU tread, easy to move Roll width 450 mm Conditions about threaded spindles adjustable 1500 mm roller conveyor per side 2750 mm stop length per side Total length 5990 mm Stiff profile heavily ribbed 100x50 mm Anodised aluminum (extendable as option) 1 hinged stop right and left Measuring tape right and left

Condition: used, Year of construction: 2014, This Graule crosscut and mitre saw with roller conveyor and TigerStop, type: ZS200, will be auctioned online in our industrial/machinery auction - site closure Holzbau Hahn - Hundegger joinery line - woodworking machines - commercial vehicles - tools - material - containers - racks. Bdodpfxsxqv Ngs Aacei

Condition: new, Year of construction: 2025, crosscut and miter saw type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Bjdpji Dfidjfx Aacedi Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm cutting width at 45deg: swivelled: 295 mm Cutting height at 90deg: 200 mm Cutting height at 45deg tilted: 140 mm Saw can be tilted on one side up to approx. 25 degrees to acute angles and tilted flat to the left up to 30 degrees Machine stitched: approx. 250 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: new, A heavy duty German built radial arm crosscut saw with swivel and tilting capability and a large cutting capacity of up to 200mm deep. A unique feature on this model of machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Both optional vertical (tilting) and standard horizontal (swivel) angles can be adjusted manually with either graduated scales or with an optional digital display unit for reading the position. The saw is also available with an optional automatic NC positioning system with 4 memorised pre set positions. The machine is ideally suited for easy and accurate cutting of compound angles for furniture and joinery components. The machine can be specified to cut wood, aluminium, plastics or composite materials. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand Heavy duty 5 KW motor. Spring return of saw carriage. 1 x 520mm dia TCT x 4.4mm kerf x 50mm bore - 60 teeth WZ saw alternate bevel. 50mm spindle diameter. 22 - 90 - 45 horizontal movement. (Swivel) 30 - 90 - 60 vertical movement. (Tilt - optional N model) Adjustable upper protection. 520mm TCT sawblade Z60. Bdjdjdy Hm Nepfx Aacsi Cutting Capacity: 420 wide x 200mm deep at 90 degrees. 295 wide x 200mm deep at 45 degrees. 420 wide x 140mm deep at 45 degrees. (Tilt- optional N model). Dust extraction outlet 100mm. Working height of table 900mm

Condition: used, - 2250 mm Cutting width - 80 mm cutting height - 2x 3,7 KW saw motors Bdjdpfshkm A Nox Aacsi

Condition: used, Year of construction: 1973, With a left-hand circular saw that can be swiveled to 45°. Cutting size: 2200 x 2500 mm. 3 motors, each with 4.5 kW. Both cross-cut saws can be swiveled to 45° - 90°, each with a scoring motor. All three saws can be driven up to 400 mm in diameter. Minimum cutting width: 210 mm. Both scoring saws are pneumatically displaced forward and backward. With vacuum suction cups for panel securing. Storage location: Nattheim Bodovvkm Iopfx Aacsdi

Condition: excellent (used), Catalogue number 7386 TECHNICAL DATA Bdsdpfxst E Silo Aacoi - max. saw blade diameter: 500mm - spindle diameter: 30mm - hydraulic clamp serves as blade guard - hydraulic blade stroke - max. cutting width: 550mm - 4 sliding rollers in the table - top feed roller, toothed and pressure type - max. cutting height (in the centre): 100mm - main motor: 5.9 kW - extraction port diameter: 100mm, 120mm - table dimensions: 700x630mm - table height from base: 830mm - infeed roller table - roller diameter: 350mm table size: - length/width: 4480x700mm - motor: 0.75kW - outfeed table (belt) - belt width: 510mm table size: - length/width: 3130x800mm - motor: 0.75kW - machine dimensions (L/W/H): 890x910x1200mm - total weight approx.: 900kg – Infeed and outfeed table – Hydraulically adjustable blade – Used saw, in very good condition Net price: 24,900 PLN Net price: 5,930 EUR based on 4.2 EUR rate (Prices may vary with greater fluctuations)

Condition: used, Year of construction: 1980, Maximum cutting width: 4500 mm Bsdpfx Asw E D E Uoacsdi Connected load: 9.37 kW

Year of construction: 2004, condition: excellent (used), Dimter optimization crosscut saw 350 with elevation AH 1400 mm crosscut see picture crosscut saw control cabinet Bodpfx Aaoncc Icecedi Scanner interface sorting 6500 mm long 3 pushers Waste flap Machine is already dismantled and immediately available Machine ran without problems until dismantling Transport can be organized

Condition: ready for operation (used), functionality: fully functional, Horizontal block bandsaw BÖGLI ARL125 with hydraulic carriage The cutting thickness is entered via a "Mudata" controller Carriage functions operated via control panel: - Log turner: lift-lower-left-right - Clamping dogs: clamp-release-hook up-hook down Blade wheel diameter: 1250mm Blade wheel width: 130mm Opening: approx. 1200mm 5 hydraulic clamping dogs 1 mechanical clamping dog 3 hydraulic log turners Distance first to sixth clamp: 7600mm Cutting length: approx. 11 meters Main drive by Dahlander motor 30kW 1470rpm - 20kW 980rpm Feed frequency-controlled 5.5kW via rack and pinion Bdodpfxsxrkuyj Aacei The machine was professionally dismantled by our technicians and can be inspected at our warehouse by appointment.

Condition: used, Year of construction: 2022, Heavy duty rack and pinion push feed system 6000 mm in feed capacity Ø600 saw blade 10 hp saw motor Automatic angle setting (+70 - 70 degrees ) Bjdjw Tar Ejpfx Aacjdi Vertical Clamping Horizontal clamping Electrically interlocked safety hood Touch screen controller 12" colour display Full optimisation 1000 mm out feed table

Condition: used, Year of construction: 2007, functionality: fully functional, used horizontal ZENZ block bandsaw type BN 110 S, stationary Year of manufacture: 2007; completely overhauled in 2022 Conveying technology year: 2022 Serial number: 141-8300 Equipment: • 22 kW drive motor • 7 m cutting length • 5 vertical supports • 2 log turners (+2 holders) • Log lifting preparation with frame • 4 level compensators with claws (+2 holders) • 1 log roller • 1 new pre-cutter • PLC control including cutting program • Seat mounted on armrests • Left: PLC - Right: joystick Bdedpfx Aaswlfdxscji • 1 Zenz automatic sharpening machine type AHB (serial no.: S-1012) • 4 bandsaw blades 6000x100x1.1 stellite for softwood (prod. no.: AB 0) • 4 bandsaw blades 6000x100x1.1 stellite for hardwood (prod. no.: AB 0) • Water cooling with 20 l tank and nozzle o Mounted on blade guide • Log lifting system o With 3 log lifting arms o With 2 cylinders • Log lifter preparation in frame o With control unit o Mount for pipe o Two mounts for cylinders • Hydraulic frame ejector for 820 mm • Green horizontal laser indicator Mechanisation consisting of: • Hydraulic folding frame for offloading at the saw with electrically driven roller conveyor • Electrically driven roller conveyor with hydraulic ejectors o Both roller conveyors operate simultaneously • Roller table 4 m long – slightly inclined with stop o All electric and hydraulic elements operable from the operator’s station The block bandsaw including conveyor technology is fully operational.

Condition: excellent (used), CATALOG NUMBER 7181 TECHNICAL DATA - max disc diameter: 300mm - disc bore diameter: 30mm - disc guard - max cutting height: 100mm - max cutting width: 700mm - possibility of angle cutting in the vertical plane +90°/-90° (arm travel or disc travel) - possibility to rotate arm right/left - motor: 2.2kW - table size: 950x700mm - extraction port diameter: 60mm - dimensions (LxWxH): 1200x950x1400mm - weight: 155kg ADVANTAGES – manufactured in Italy – not repainted – very good condition – used saw Net price: 6500 PLN Net price: 1550 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (with larger exchange rate fluctuations the price may change) Bdedpoqffrcsfx Aacji

Condition: used, Hüllhorst DH54S Machine number: 03974 Circular saw drive: a) 2 motors: 5 HP each Bdjdpjxrzfvefx Aacoi b) Speed: 3000 rpm c) Circular saw diameter: 400 mm d) Circular saw blade thickness: 2.6 mm e) Circular saw bore: 35 mm Working range: a) Standard machine: 2200 mm cutting depth and 2200 mm cutting width b) Custom cutting depth: up to 2500 mm c) Custom cutting width: up to 3000 mm d) Minimum cutting width: 210 mm e) Maximum cutting height: 100 mm

Year of construction: 2001, condition: used, Multiple crosscut saw with 4 saws Bsdsiw El Ujpfx Aacedi

Year of construction: 2021, condition: new, Wravor WRC 1050 Bodpfx Aajgyw R Socedi max.cutting length 6,5m We are also happy to configure a new log band saw according to your wishes.

Condition: used, functionality: fully functional, Horizontal block bandsaw BÖGLI ARL150 with hydraulic clamping carriage including complete ALBER sharpening machine with back grinding device. Bdjdpfx Aajxp Hzdjcji The ideal machine for processing large logs. Cutting thickness is entered via a 'Mudata' control unit. A ripsaw for splitting is mounted directly on the saw frame. Blade wheel diameter: 1,500 mm Blade wheel width: 170 mm Cutting length up to 8 m Max. clearance: 1,900 mm 5 hydraulic clamping fixtures 3 hydraulic log turners Saw drive power: 45 kW Feed drive, frequency controlled: 5.5 kW (wire rope drive) The machine has been professionally dismantled by our skilled personnel and can be inspected in our warehouse by appointment.

Condition: good (used), Year of construction: 1997, Under-table cross-cut saw max. cutting width: 800 mm max. cutting height: approx. 150 mm Bsdpfx Aaextwk Dscsdi saw blade: 550 mm with 2 roller conveyors, the right one with stop and measuring scale

Condition: excellent (used), Catalogue number 7722 TECHNICAL DATA - max saw blade diameter: 450mm - spindle diameter: 30mm - hydraulic clamp also serves as a blade guard - hydraulic blade stroke - max cutting width: 400mm - max cutting height: 130mm - main motor: 3.7kW - extraction outlets diameter: 100mm, 120mm - table dimensions: 670x705mm - table height from base: 800mm - roller tables: 2 pcs - roller diameter: 300mm Table dimensions: - outfeed table length/width (stop, scale): 2910x300mm - infeed table length/width: 2250x300mm Bdodpfjw Rb Rwox Aacei - machine dimensions (L/W/H): 1000x950x1210mm - total weight: 430kg ADVANTAGES – 2 roller tables – hydraulically adjustable blade – used saw, very good condition Net price: 18,900 PLN Net price: 4,500 EUR Net price calculated at 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuation)

Condition: excellent (used), CATALOG NUMBER 7680 TECHNICAL DATA - Max. blade diameter: 500mm - Spindle diameter: 30mm - Hydraulic blade stroke Bdsdpfx Aaowtqbfjcji - Max. cutting width: 500mm - Max. cutting height (in the center, with a 500mm blade): 160mm - Main motor: 4kW - Table dimensions: 715x1070mm - Table height from base: 790mm - Roller tables: 2 pcs - Table dimensions: - Infeed length/width: 2000x640mm - Outfeed length/width: 2000x640mm - Machine dimensions (L/W/H): 1400x940x1070mm - Total weight: 480kg ADVANTAGES – 2 roller tables – Hydraulic blade stroke – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on rate 4.2 EUR) (Prices may change due to strong fluctuations)

Condition: excellent (used), CATALOG NUMBER 7774 TECHNICAL DATA - max saw blade diameter: 500mm - spindle diameter: 30mm Bdedpfx Aaoxl Dycocoi - top pneumatic hold-down - blade guard - pneumatic blade feed - max cutting height: 160mm - max cutting width: 585mm - main motor: 6.2kW - extraction port diameters: 80, 120mm - table dimensions (L/W): 1180x800mm - table height from base: 895mm - roller tables: 2 pcs - infeed roller table with guide: 1770mm - outfeed roller table with guide: 900mm - roller table width: 585mm - overall dimensions (L/W/H): 5000x1360x1370mm - weight approx.: 500kg ADVANTAGES – manufactured in Poland – original DTR documentation + CE (EU) – 2 roller tables – pneumatic saw blade stroke – used saw in perfect condition Net price: 19,900 PLN Net price: 4,740 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalog number 7707 TECHNICAL DATA - Maximum saw blade diameter: 500 mm - Spindle diameter: 30 mm - Pneumatic material clamp - Pneumatic blade stroke Bjdpfx Aaew Edigecedi - Maximum cutting width: 800 mm - Cutting height: 135 mm - Pneumatic control system - Main motor power: 11 kW - Extraction port diameter: 2 x 110 mm - Table dimensions: 520 x 1550 mm - Table height from base: 810 mm Infeed roller table: - Dimensions (L/W/H): 2700 x 720 x 900 mm - Equipped with 3 pneumatic stops - Table fitted with guide rail - Roller size: 530 mm - 6 driven rollers, 1.5 kW Outfeed roller table: - Dimensions (L/W/H): 2050 x 700 x 800 mm - Roller size: 590 mm - 11 idler rollers - Equipped with 3 pneumatic stops Machine dimensions (L/W/H): 1900 x 1450 x 1600 mm - Total weight: 1500 kg ADVANTAGES - Supplied with two roller tables - Italian manufacture - Pneumatic control system - Pneumatic blade stroke (feed speed adjustable by handwheel) - Used saw in very good condition Net price: 33,900 PLN Net price: 8,070 EUR (based on the exchange rate of 4.2 PLN/EUR) (Prices may vary depending on exchange rate fluctuations)