Used Log Bandsaw for sale (2,389)

Condition: not inspected (used), Year of construction: 2018, machine/vehicle number: 58/18/0016, Bandsaw machine WAGNER (TRENNJAEGER) TEBA 300 A-NC Delivery terms: Ex works, loaded onto truck Location: 74906 Bad Rappenau Collection: Collection of the machine is scheduled for October 7, 2026. The exact collection time will be agreed upon in advance. Payment terms: Prepayment – by bank transfer Technical data: Saw blade speed: 15 – 90 m/min Saw blade size: 3,110 x 27 x 0.9 mm Saw blade inclination: 3° operating height Clamping jaw: 850 mm Hydraulic oil: approx. 26 liters Coolant tank: approx. 35 liters Cutting ranges at 90°: Round: Ø 300 mm Square: 285 mm Rectangle: 205 x 290 mm Cutting ranges at 45°: Round: Ø 240 mm Square: 220 mm Rectangle: 235 x 130 mm Scope of supply: Existing manuals as shown in the pictures Roller guides as shown in the pictures Protective cover as shown in the pictures Dimensions & weights: Installation dimensions L x W x H approx.: 2790 x 1500 x 1700 mm Weight approx.: 1100 kg Chjdpjzx Sx Hofx Ab Dob If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ►If desired, we can offer transport to the destination. ►The quoted price is net, plus VAT. ►The goods are sold with the exclusion of any warranty. ►Technical data subject to change without notice. ►Subject to prior sale. ❗The goods are sold exclusively to business customers❗

Condition: good (used), Bandsaw line for big logs 1. Log conveyor Cjdpfxsikvlie Ab Dehb 2. Buffering log deck and one piece feeder 3. Log conveyor and centering infeed with turner 4. Söderhamn AKE 245A Twin reducer bandsaw (ARI 6 knife heads) 5. Board separator with block turner 6. Side transfer of blocks 7. Block infeed 8. ARI BKR-600 9. ARI DS-75 multi rip saw 10. Edging line with ARI KT-52 Edger Price: 2 100 000 SEK, in existing condition on site. Line is complete but not all conveyor in bottom floor. Bruks 1503M chipper. No power on electric cabinets (no PLC software) Can be dismantled and loaded by UJ Trading AB Sawmill is located in Sweden.

Condition: used, Year of construction: 2007, functionality: fully functional, used horizontal ZENZ block bandsaw type BN 110 S, stationary Year of manufacture: 2007; completely overhauled in 2022 Conveying technology year: 2022 Serial number: 141-8300 Equipment: • 22 kW drive motor • 7 m cutting length • 5 vertical supports • 2 log turners (+2 holders) • Log lifting preparation with frame • 4 level compensators with claws (+2 holders) • 1 log roller • 1 new pre-cutter • PLC control including cutting program • Seat mounted on armrests • Left: PLC - Right: joystick • 1 Zenz automatic sharpening machine type AHB (serial no.: S-1012) • 4 bandsaw blades 6000x100x1.1 stellite for softwood (prod. no.: AB 0) • 4 bandsaw blades 6000x100x1.1 stellite for hardwood (prod. no.: AB 0) • Water cooling with 20 l tank and nozzle o Mounted on blade guide • Log lifting system o With 3 log lifting arms o With 2 cylinders • Log lifter preparation in frame o With control unit o Mount for pipe o Two mounts for cylinders • Hydraulic frame ejector for 820 mm • Green horizontal laser indicator Mechanisation consisting of: • Hydraulic folding frame for offloading at the saw with electrically driven roller conveyor • Electrically driven roller conveyor with hydraulic ejectors Csdpfxowlfdxs Ab Dohb o Both roller conveyors operate simultaneously • Roller table 4 m long – slightly inclined with stop o All electric and hydraulic elements operable from the operator’s station The block bandsaw including conveyor technology is fully operational.

Condition: refurbished (used), Kolbe stainless steel Bandsaws - 7 machines in total Model K430 S Year 2018 Fixed table Cjdjvzmmuspfx Ab Dehb Excellent condition

Condition: used, Pulley Diameter 700mm Max sawblade width 35mm Table size 980mm x 700mm Max blade length 5120mm Table Tilting 0 to 35 degrees Throat capacity 600mm Max. Cutting height 350mm Adjustable rip fence 4 Hp motor and starter Chjdpozd Uuhsfx Ab Dob Weight 435kg

Condition: good (used), Year of construction: 2000, operating hours: 40,000 h, functionality: fully functional, track width: 3,000 mm, Equipment: crane, low noise, BZH sorting and cutting trolley. Track gauge: 3m. OBX 2 crane. Lifting capacity at 13.20m: 2200kg without grapple. Chjdpfozycf Tox Ab Djb Chainsaw on the right side. Crane positioned in front of the cab. Grapple. Sold separately.

Condition: used, Pilous ARG 235 Plus Horizontal Bandsaw, Includes 4500mm x 800mm Infeed Roller Conveyor and 1300mm x 800mm Outfeed Conveyor. S/No. 123/19/0043. Country of Origin: Czech Republic Cedszn Uwdjpfx Ab Dehb Please Note: Collection from 6th – 20th October 2026, Site will be closed from 10th September – 5th October 2026 Location: These lots are located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), functionality: fully functional, Year of construction: 1916, Binderberger horizontal log splitter 30 t Chsdpfeyglm Ujx Ab Dob

Condition: good (used), Year of construction: 2017, Multi-Sheet Machining For Maximum Output Automatic Loading System CNC Bandsawing, Routing & Drilling CNC Control Of The Bandsaw Movement +/- 90 Degrees The MZ Pluris is recognised as the machine of choice for all sofa and chair frame manufactures. The machine can work with OSB, Plywood, MDF, Chipboard (good quality), solid wood and also some composite materials. It has a number of key advantages over standard CNC nesting machines that include the possibility to stack multiple sheets high eg 5 x 12mm thick sheets, thanks to the use of the bandsaw sheet yield is much better, no vacuum is used so the machine is able to cut small shaped parts without difficulty and lastly cut parts are coming off on to the side discharge conveyor as the machine is still working, thus maximising machine output. Increased working capacity of 2550mm 1550mm Sheet size = 1220 x 2,440mm (8' x 4 ') and 1525 x 1525mm Standard equipment / features: CNC bandsaw specification - Maximum depth of curve 800mm - Minimum radius of cut 50mm - Maximum cutting height 100mm - Automatic angling of blade +/- 90 degrees - Blade size 5900 x 13mm - Automatic sawblade tensioning - Cast aluminium saw pulleys 900mm dia - Self braking motor 11kw CNC router specification: - Maximum working height / cutting depth 60mm - Electro spindle power S6 9KW - Variable rotation speed 7000 - 24000 rpm - HSK 63F tool holder Fence / grippers / supports: - Programmable pusher fence with 6 x pneumatic panel grippers - 8 x panel support arms General: - Automatic centralised lubrication system consisting of 3 x oil pumps - Internal conveyor belt for removal of dust / waste cuts - Free standing electrical control cabinet with PC and keyboard - Hand held remote control CNC vertical drilling unit: - Maximum drilling depth 70mm - 5 x independent drilling spindles in line. (Drills not included). Cjdpfxjtqfv Io Ab Dohb - 1.7kw motor Plus package: - 5 position automatic tool changer - Automatic movement of clamps and support arms - set through the program Lifting table: - 4 screw - Capacity 2550 x 1525mm - Max load capacity 3000kg approx - Max panel pack height 700mm - PIT REQUIRED Year - 2017 CE Serial nr - 22/2017

Condition: good (used), Year of construction: 2007, functionality: fully functional, Note: Machine is still at the customer’s location – available at the beginning of 2027. For sale is a mobile Hartenberger “Wirex CZ-1/1 band sawmill / mobile sawmill in a robust design. The system is designed for cutting roundwood or logs into boards, planks, and timbers. The existing hydraulic log handling system with a loading/lifting arm, log turner, and log clamp allows larger logs to be handled and positioned on the system. Technical data / equipment: Manufacturer: Hartenberger woodworking machines Model: Wirex CZ-1/1 Machine type: Band sawmill / mobile sawmill Year of manufacture: 03/2007 Motor power: 12 kW Total weight: approx. 2,500 kg Width: approx. 2,355 mm Height: approx. 2,850 mm Mobile design Tandem chassis Electric, continuously variable feed Feed speed: approx. 4–35 m/min Electric height adjustment via chain Roller diameter: approx. 500 mm Saw band length: approx. 4,800 mm Saw band width: approx. 35–45 mm 1 loading/lifting arm 1 log turner with gripper 1 hydraulic log clamp Hydraulic log handling Roller/support track for the logs Dust extraction connections Codpfjzxrnnjx Ab Dehb Stable steel frame construction Condition and scope of delivery according to photos The system is in used condition, corresponding to its age, and shows corresponding signs of wear. Inspection and demonstration possible by appointment. Transport possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes subject to confirmation. All information without guarantee.

Condition: used, Working mode: semiautomatic Machine type: Horizontal bandsaw Cut: Mitre cut Mitre cuts range: -60° – 60° Drive: 4 kW, 3×400 V/50 Hz Saw band speed: 20 – 120 m/min. Saw band dimensions: 6 100×41×1,3 mm Material loading height: 770 mm Shortest remnant length: 40 mm Cjdpfx Ajydp Udjb Djhb Smallest sawing diameter: Ø 5 mm

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m Chjdju Smq Sopfx Ab Dsb - Rema Scanner - log infeed conveyor

Condition: repair required (used), Year of construction: 2003, functionality: fully functional, total length: 7,000 mm, number of previous owners: 1, The stepped slide is fully functional and was in operation until the plant was converted. Chodpfx Abszwpxzj Djb The system is being sold as in need of overhaul. There is wear and tear on the mechanical guides and drive elements, consistent with its age. Welding and maintenance work are recommended for its long-term reuse. It is ideal as a cost-effective project for refurbishment or as a robust source of spare parts.

Condition: used, Pulley Diameter 700mm Max sawblade width 40mm Table size 765mm x 1000mm Table Tilting 0 to 35 degrees Throat capacity 680mm Chjdpfswl H Dajx Ab Dob Max. Cutting height 485mm Adjustable rip fence 4 Hp motor and starter DC brake Serial number 80210

Condition: used, Year of construction: 1988, 105 twinband linear pm for upto 300mm round logs 4mtr length, this is a complete round to finish sawing system, breaking round logs down to return and resaw everything to a finished product, high production and minimum waste Chedpfjm Rhfdox Ab Djb

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: MACH1097, For sale is a reliable and precise grinding machine from the leading French manufacturer, Forézienne (MFLS), designed for the automated and high-quality sharpening and profile restoration of band saw blades. Thanks to its precise CNC control, the machine ensures uniform geometry of the saw teeth, extends the service life of the cutting tools, and significantly reduces setup time. The machine is ready for industrial use, well-maintained, and suitable for both sharpening centers and the woodworking industry. Cedpozxpkmsfx Ab Dohb

Condition: ready for operation (used), functionality: fully functional, The machine is ideally suited for the precise cutting of solid materials, tubes, and profiles made of steel, stainless steel, and non-ferrous metals. The NC control allows recurring cutting tasks to be carried out efficiently and reproducibly. The robust industrial design makes the saw an ideal solution for locksmiths, steel construction companies, and general mechanical engineering. Technical data Manufacturer: BEKA-MAK Type: BMSO 325 Machine type: Horizontal metal bandsaw Design: NC-controlled semi-automatic Cutting type: Straight cut 90° Saw blade: approx. 34 × 1.1 × 4,110 mm Infinitely adjustable band speed Hydraulic saw feed Hydraulic workpiece clamping Coolant system Cutting capacities at 90° Round material: Ø 325 mm Square material: 330 × 325 mm Rectangular material: 500 × 325 mm Equipment NC control Hydraulic material clamp Automatic saw feed Coolant system Chip brush Material stop Robust industrial design 7 saw blades included The bandsaw is in used condition and comes from ongoing operations. Inspection and a trial run are possible by appointment. Cjdpfx Aszwd E Neb Dehb

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Complete sawmill for pallet lumber production, consisting of: Individual sale of machine packages is also possible. 1. Log yard Häwa, with root reducer and Valon Kone debarker VK 90. Calibrated factory inlet measurement system, manufacturer Jörg. Sorting with 28 bins. Cedpfx Abjx T Azwj Djhb Log length 2.0 - 5.0 m. Log diameter 20 - 90 cm. 2. Sawmill: Möhringer band saw, running band saw with Flexi Drive carriage. Splinter detection device. Log feeding with stepped singulation. Laser measurement system Bidac. Kallfass model trimming. Resawing: EWD Optimes with chipper PF 19 and double-blade saw NKU. Brodbaek edger. Stacking system for main product, empty pallet handling for main and side products. Kuka robot for packing side products and main products, four dimensions possible. Complete mechanization, electrical and electronic control cabinets, etc. Disposal. Detailed plans or a video can be sent upon request.

Condition: good (used), Year of construction: 2001, Semi-automatic Bomar STG 330 DGH saw Chjdszur Duspfx Ab Dsb - Cutting dimensions: 330mm x 510mm - 60-degree mitre cut - Variable cutting speed - Year of manufacture: 2001

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, cutting angle (max.): 30 °, machine/vehicle number: M3378, For sale: large band saw for soft materials. Outreach: 1.25 m, allowing you to cut through material up to 2.5 m wide. Cutting height: approx. 90 cm. Cutting length: approx. 2.3 m. Chedpfszfwfxjx Ab Dsb The upper part can be tilted electrically to the left and right up to 30 degrees, making this a special sawing machine. Well-maintained machine with few operating hours. Fecken Kirfel – German quality. Installation and adjustment can be arranged upon request.

Condition: excellent (used), functionality: fully functional, Möhringer main stem and log separator with 3 separator arms. Distribution and singulation are performed hydraulically. Suitable for short logs up to 5 meters in length. Includes hydraulic cylinders and solenoid valves. Chsdpfx Aozxrnusb Deb Separator arm spacing: 1.25 and 1.60 m.

Condition: excellent (used), Year of construction: 2019, operating hours: 8,000 h, functionality: fully functional, Equipment: cabin, documentation/manual, Log cutting line: 1) WRAVOR band saw, type WRC-1250 2) Circular saw for edging and ripping with 3 movable and one fixed blade, PLC controlled, type WRAVOR 20/120 3X 3) Wravor conveyors for extracting lumber at the band saw outlet, transferring to the edger, feeding into the edger, and a conveyor with left-right discharge at the edger outlet, plus a log loading ramp for the band saw The equipment can also be sold separately (either the band saw or the edger). For sale: complete WRAVOR log cutting line, type WRC-1250 Wravor Sawmill Machinery, manufactured in 2019: 1) Wravor band saw WRC 1250 2) Circular saw for edging and ripping with 3 adjustable and one fixed blade, type WRAVOR 20/120 3X 3) Conveyors (log loading ramp, lumber discharge conveyor from the band saw, transfer to the edger, edger feed conveyors, conveyor with left-right discharge at the edger outlet) Price for the entire line: 158,000 euros + VAT. Cedpszwf Ncofx Ab Dshb The equipment can also be sold separately; for more details, please call:

Year of construction: 2021, condition: ready for operation (used), For sale is a professional sharpening machine, the Forestone 2, specifically designed for the precise and automated sharpening of TCT saw blades (Tungsten Carbide Tipped). This machine is ideal for restoring the geometry of band saws with carbide-tipped teeth, ensuring maximum tool life and clean cutting quality. Codpfx Ajzxpr Reb Djhb

Condition: good (used), Storage location: 3133 Manufacturer: Jaespa Type/Model: W 260 M Cutting range 90° round: 260 mm Square: 260 x 400 mm Rectangle: 260 x 260 mm Cutting range 45° round: 160 mm Square: 160 x 260 mm Rectangle: 160 x 160 mm when the clamping jaws are rotated Saw blade: 3,660 x 25 x 0.9 mm Band speed: 17 to 120 m/min Csdozxa N Hspfx Ab Dohb Clamping jaw height x width: Opening: Connection: 1.5 kW Accessories/Equipment: Condition: good Weight: 0.66 t Dimensions: 1,900 x 1,000 x 1,000 mm

Condition: excellent (used), Marel stainless steel 350 bandsaw in lovely condition. Perfect for factories cutting meat, fish blocks etc. Direct from closed UK fish company. Csdpfxox Av R Ie Ab Djhb