Used Machine Tools for sale (65,550)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 785 mm, travel distance Y-axis: 470 mm, travel distance Z-axis: 530 mm, table width: 500 mm, table length: 900 mm, spindle speed (max.): 8,000 rpm, XYZ LPM Vertical Machining Centre Model: LPM Year: 2016 ‘X’ axis Travel: 785mm ‘Y’ axis Travel: 470mm ‘Z’ axis Travel: 530mm Gbedjyg N Aaopfx Abujh Table Size: 900 x 500mm Spindle Taper: BT 40 Spindle Speeds: 8000 RPM Automatic Toolchanger: 16 station

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Gbedpfxeydvzde Abuoh Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Gbodpeya H Nkefx Abush Air Require for ATC For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe Gedpfxoyaywhs Abujbh ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2007, XYZ SMX SLV 3 Axis Turret Milling Machine ProtoTRAK | SMX Control (2007) 3 Axis CNC Capacity (X Axis, Y Axis & Quill) Spindle Taper ISO 40 Gbodpfxjx Tiq Se Abuoh Spindle speeds to 70 - 3600 RPM Table Size 1473 x 305mm Table Travel: X - 1000mm Y - 410mm Knee Travel: Z - 413mm Quill Travel Z - 127mm Air Power Draw Bar Supplied with a range of spindle tooling Coolant Year of Manufacture: 2007 Weight: 1850 Kgs Power Requirements: 18A *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79109 Machine Serial Number: 12308 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Gbsdpfx Abexftqdeueh Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2011 Gbodpex D U Arefx Abuoh Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards Machine Manuals 3 Toolholders (More available if required). TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79003 Machine Serial Number: SL281 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Gbsdpox D Tbmjfx Abuoh Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Gbsdpfx Abjxxb Rreush Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2022, functionality: unexamined, CNC long-bed machining center, model CMA 3RD-CNC, year of manufacture 2022, serial number 4063. The machine is suitable for drilling, thread cutting, milling, and other machining processes on large-format workpieces. Equipped with a robust steel frame construction and industrial PC-based control system from Omron. Features: Spindle: 13.1 kW, BT-40 taper, speed approx. 2,000–6,000 rpm. Rapid traverse speed: X and Y axes up to 30 m/min. Travel distances: X = 6,000 mm, Y = 600 mm, Z = 450 mm. Drilling capacity: Ø22–Ø42 mm. Thread cutting up to M30. Table width: 580 mm with T-slots. Electrical: 400 V, 50/60 Hz, 32 A, 3-phase. Control voltage 24 V. Weight approx. 7.2 tons. Includes tool changer with carousel magazine. Gbjdpsx N Ncgjfx Abueh

Condition: used, Year of construction: 2005, XYZ Proturn VL425 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK VL Control (Reconditioned 2025) Max’ Distance Between Centres 1250mm Max Swing over Bed 400mm Max’ Swing over Gap 700mm Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Spindle Motor 10hp / 7.5Kw Gbjdpfxoxt Ibye Abuoh Quick Change Tool Post Tailstock MT5 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2005 We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Tooling as photographed Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78938 Machine Serial Number: L247 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2019, functionality: fully functional, feed length X-axis: 787 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, spindle speed (max.): 5,000 rpm, workpiece weight (max.): 600 kg, The machine is in good technical condition, connected to power and can be tested. Gbjdpfjxxtmfex Abujh

Condition: new, functionality: fully functional, machine/vehicle number: RM310119, feed length X-axis: 787 mm, feed length Y-axis: 508 mm, feed length Z-axis: 584 mm, quill diameter: 105 mm, table width: 355 mm, table length: 1,372 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 40 rpm, table load: 600 kg, overall weight: 2,390 kg, input voltage: 400 V, workpiece weight (max.): 600 kg, warranty duration: 12 months, input current: 22 A, input frequency: 50 Hz, Built-in programming cycles: Position: Spindle positioning Drilling: Simple holes, holes on a circle Milled holes: Holes made by milling cutter – straight and circular Arcs: Arcs in XY, XZ, and YZ plane Pockets: Rectangular, circular, irregular Island: Milling rectangular, circular, and irregular islands Profile: Rectangular, circular, irregular Helix: Spiral ramping Milling: Straight lines along X, Y, or Z axis or any combination Engraving: Text engraving Thread cutting: Thread cutting with tap Thread milling: Thread milling with form cutters Copying: Copying a series of cycles Mirror: Mirror image Rotation: Rotation around an axis Repetition: Repetition of a series of cycles G-code editor Clipboard Gbsdpfxowtnxns Abush

Condition: excellent (used), Year of construction: 2007, XYZ Proturn SLX 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2007) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2007 Supplied with: 3 Jaw Chuck Gedpfxexawdke Abusbh Interlocking Chuck & Main Guards Machine Manuals 3 Toolholders (More available if required). TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication Jet Machinery Stock No: #78986 Machine Serial Number: SL286 Cost: £19,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1997, Year: 1997 Table: 1780 x 415mm Spindle Speed 30 – 2066 RPM FIDIA Control Power Draw Bar LOVO Light Gbodpfx Abjwtd Dyouoh Coolant

Condition: new, Year of construction: 2026, 600 mm 500 mm 400 mm 1000x500 mm 1200x250 mm 40-3200 U/min DIN 2080 ISO 40 Gedpfx Absyiu Rzjusbh

Condition: ready for operation (used), Year of construction: 1995, x-travel 300 mm y-travel 200 mm z-travel 350 mm table surface area 700 x 270 mm taper in main spindle ISO 40 turning speeds 8: 150 - 1660 U/min turning speed range - horizontal 8. 110 - 1230 U/min feeds 8: 25 - 285 mm/min Godpfx Ajvxllkjbujbh weight 900 kg quill stroke 60 mm total power requirement 3,7 kW range L-W-H 1,3 x 1,38 x 1,65 m Universal tool milling machine with 2 axis digital display and swiveling vertical milling head with quill, fixed + swiveling table, slotting head, automatic feeds and rapid traverse in all three directions. Machine from a repair shop. It has only a few working hours, the accuracy is very good. Machine with a just low special price. Price new about € 24000,--. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1982, x-travel 300 mm y-travel 160 mm z-travel 340 mm feeds -stepless- 5-500 mm/min rapid traverse 1200 mm/min spindle turning speed range 40 - 2000 U/min tool taper Normkegel 40 table length 600 mm table width 120 mm voltage 380 V frequency 50 Hz rated current 13 A weight of the machine ca. 0,750 t Gbedpfxsvvnfuo Abueh dimensions of the machine ca. 1,8 x 1,5 x 1,8 m DESCRIPTION Machine incl: active three-axis digital readout HEIDENHAIN documentation various tool holders Machine vice etc.

Condition: excellent (used), Year of construction: 2000, Machine-Details: Stock-No. 1022-2416 Type of machine Tool Room Milling Machine - Universal Make DECKEL Type FP 1 Year of manufacture 2000 Type of control conventional Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information: The machine is in very good condition and comes from a training workshop. Gbjdpfxeyhdbmj Abuoh Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: excellent (used), Year of construction: 1998, operating hours: 17,260 h, Table size: 1000 x 500 mm Tool holder: ISO 40 Travel paths: X-axis: 800 mm Y-axis: 500 mm Z-axis: 420 mm Distance between horizontal spindle axis and table: 210 – 630 mm Distance between vertical spindle nose and table: 130 – 550 mm Table load capacity: max. 500 kg Speed range: 50 - 4000 rpm Feed rate (infinitely variable): 5 - 2000 mm/min Rapid traverse in all axes: 8 m/min Vertical milling head, swiveling: ± 90° Manual quill stroke adjustment: 100 mm Drive power: 7.5 kW Dimensions (L x W x H): approx. 3000 x 2400 x 1975 mm Weight: approx. 3000 kg Accessories / Special features: • CNC contouring control HEIDENHAIN TNC 410 • Electronic handwheel HEIDENHAIN HR 410 • SIEMENS AC servo drives • Data interface V 24 / RS 232 • Swiveling vertical milling head ± 90° right & left with 100 mm quill adjustment • Hydraulic tool clamping, vertical & horizontal, ISO 40 Gedpfxextu H Ne Abuobh • Swivel-away device for the vertical milling head • Very wide speed range up to 4,000 rpm • Vibration-free operation thanks to rigid and heavily ribbed cast iron guideways • Ball screws for X, Y, and Z axes • All electrical control elements on one side, in a movable control panel • Fixed angle table with foldable chip guard • Coolant system integrated in the machine base • Hydraulic unit • Central lubrication • CE compliant Operating hours: 17,256 Spindle hours: 3,816 Image: shows brochure photo Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1986, x-travel 390/410 mm y-travel 290/310 mm Gbsdpfx Aevylkcobuoh z-travel 380/400 mm total power requirement 4 kW weight of the machine ca. 1,25 t dimensions of the machine ca. 2100x2100x1700 m technical data please see attachment!

Condition: new, Year of construction: 2026, 420 mm 220 mm Gbsdpfx Asxfb H Tjbuoh 380 mm 840x390 mm 950x250 mm 65-2600 U/min DIN 2080 ISO 40

Condition: new, Year of construction: 2025, 600 mm 500 mm 400 mm 1000x500 mm 1200x250 mm Gbsdpfx Aewp Trrsbuoh 40-3200 U/min DIN 2080 ISO 40

Condition: new, Year of construction: 2025, 600 mm 500 mm 400 mm Gjdpfxewp Tqbs Abuobh 1000x500 mm 1200x250 mm 40-3200 U/min DIN 2080 ISO 40

Condition: new, Year of construction: 2025, 420 mm 220 mm 380 mm 840x390 mm Gsdpfx Abowp Tideujbh 950x250 mm 65-2600 U/min DIN 2080 ISO 40