Used Magnetic Chuck for sale (5,585)

Condition: used, diameter 430 mm hollow ca.165 mm chuck width 120 mm Diameter: Ø430mm Passage: approx. 165mm Lrsdpfsy Supdox Ahzjl Chuck width: 120mm Weight: 75kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Lodpfxoy R Sm Ro Ahzorl -Top jaws: 4-piece hard rotary jaw set -Jaw width: 30 mm -Dimensions: see photo technical drawing -Overall dimensions: 135/125/H75 mm -Total weight: 5.9 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotating jaw set, 4-piece Ljdpoy R Slmsfx Ahzorl -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/105/H67 mm -Total weight: 5.3 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Lredpfx Ahoy R Sg Dozol -Top jaws: Rotating jaw set, 4-piece -Jaw width: 18 mm -Dimensions: see photo technical drawing -Overall dimensions: 60/73/H48 mm -Total weight: 1.4 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotating jaw set, 4-piece -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/90/H57 mm -Total weight: 3.0 kg Lodpfx Aey R Sgdohzjrl

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 22 mm -Dimensions: see photo technical drawing Lredjy R R Ndspfx Ahzol -Overall dimensions: 90/90/H56 mm -Total weight: 2.0 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 22 mm Ljdpoy R R I Tjfx Ahzerl -Dimensions: see photo technical drawing -Overall dimensions: 85/90/H57 mm -Total weight: 2.1 kg

Condition: used, Year of construction: 2015, No. 10033 Wet drum magnetic separator Steinert WDS 92 92 (without CE package) Used, year of construction 2015 According to our customer / the previous owner, the machine is fully functional and can be viewed on site Without CE package Highly efficient recovery of FeSi or magnetite from float-sink separation and wet processing of fines The Steinert WDS is particularly popular in the processing of heavy sludge or iron ore with grain sizes between 1 µm and 3 mm. In the regeneration of heavy beet, the wet drum magnetic separator essentially ensures the recovery of magnetite or ferrosilicon (FeSi). High field strengths are achieved through the use of powerful magnets made of neodymium-iron-boron and the special design of the magnet packs, making high separation rates of over 99 % possible. Sale on behalf of customer, ex location near 54634 Bitburg, without dismantling, transport and assembly Dismantling, transport and loading by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Ledsyl Sqwopfx Ahzerl Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, CNC lathe GILDEMEISTER, type GD 160 with Gildemeister - Fanuc Mate TS control - Power chuck BERG, Ø 200 mm - 12-station tool turret, VDI 40 Lrsdpfx Ahsy T R Irezsl - 6 tool holders VDI 40, installed Machine footprint with chip conveyor: L x W x H 4200 x 2200 x 2100 mm Weight: approx. 4 tons We are making room Affordable machine – ideal for export

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange: mounting flange -Outside: Ø 198 mm -Bolt circle: Ø133 mm / M12 -Hole: Short taper 6, cone Ø 102 - 105 mm -Dimensions total Ø 198 x 55 mm -Weight: 4.0 kg Ledpswcd A Isfx Ahzorl

Condition: used, 4 INGERSOLL adjustable chuck jaws for face plate Chuck jaws for lathe chuck, mechanical clamping device, clamping block No: 39.02.10000 / 501.397 Jaw width 70 mm Jaw length 180 mm Lodpju Axzkjfx Ahzsrl Jaw carrier height 150 mm Base plate 325 x 265 mm - Stepped jaws for turning as turning and drilling jaws - Jaw adjustment via trapezoidal threaded spindle - Jaw carrier with 6 recesses 40 x 30 mm for fastening - Distance between recesses 280 x 133 and 220 x 90 mm (centered) Dimensions L x W x H 325 x 265 x 215 mm Weight per jaw 36.5 kg Weight of all 4 jaws 146 kg Good condition

Condition: used, Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbH Z-conveyor, sliding belt conveyor, conveyor belt, magnetic belt conveyor Type no.: MBF 326P31,75 Com. no.: 44489-10 Year of construction 2017 Slide width 300 mm Distance between permanent magnets 250 mm Insertion length approx. 3400 mm (up to body box) Slide-in length approx. 3900 mm (without superstructure box) Slide-in height 210 mm Insertion width housing 370 mm Insertion width threaded mounts for adjustable feet 410 mm Lrsdpfx Aei Huzxjhzel Insertion width at body box 470 mm Conveying height - discharge height approx. 1040 mm Conveyor speed approx. 2 meters/min. Motor power belt drive 0.37 kW Mains connection 400 Volt, 50 Hz - Circulating chain equipped with permanent magnets Space requirement L x W x H 5200 x 700 x 1500 mm Weight 410 kg Very good condition

Condition: used, diameter 400 mm Lrodpfxjtqqqvj Ahzsl = pneum. 3-jaw chuck make RÖHM, 400 mmø, with CAMLOCK flange, length of the pull rod 780 mm, ø of the pull rod 40 mm, with maintenance unit

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € Ljdochuvropfx Ahzerl - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) Ledpetqfhxofx Ahzjrl *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: used, Lifting magnet / crane magnet TRUNINGER: 1. 2 x 2200 kg with control cabinet – 1 unit. Lodpfsu U I Rcex Ahzsrl Pipe bundles – 2 x 850 kg. Bar steel – 2 x 2200 kg. 2. 2 x 850 kg with control cabinet – 1 unit. Magnets – 2 x 850 kg. Hooks – 2 x 2000 kg.

Condition: used, Collet set, chuck collet holder for draw-in collets WEILER Collet chuck, collet holder, collet device Suitable for WEILER Praktikant lathe, year of manufacture 1984 Draw-in collet type: FM 613 / 386E DIN 6341 Collet diameter: 32 mm Collet length: approx. 115 mm Collet thread: TR 32 x 1.5 mm Lsdpfx Ahsy Ra Dqjzorl - Collet holder sleeve with MK 5 external taper (Ø 44 mm) - Draw tube with internal thread M 32 x 1.5 mm, handwheel for manual tightening of the collet - 15 pieces FAHRION collets: Ø 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80 mm - fits WEILER Praktikant and should also fit WEILER Matador Total weight: 10.5 kg Very good condition

Condition: used, Year of construction: 2004, length 3150 mm width 725 mm speed 20 m/min power capacity 0,75 kW weight 0,35 t dimensions (WxLxH) 0,95 x 3,15 x 1,6 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck Lredpfx Ahoyx Ig Nszjl width of magnet approx. 650 mm

Condition: ready for operation (used), * Brand: Wagner * Type: electro magnetic conveyor belt * On stock: 2 pieces * 1x : length frame A-A = 1900 mm * Beltwidth: 800 mm * Driving: 1,5 kW gearbox * Dim. block: 1000 x 750 x 400 mm * Incl.: rectifier. * 1x: length frame A-A = 1900 mm * Beltwidth: 1000 mm * Driving: 3 kW gearbox * Dim. block: 1300 x 950 x 350 mm Lrsdpfx Ajy D Sx Tjhzel * Incl.: rectifier.

Condition: excellent (used), For sale: Single TC40xER16x100-AD tool holder (SK40 standard) from the renowned brand ZÜRN – Germany. Each tool holder is complete, equipped with an ER16 collet and a mounted tool (drill or milling cutter – see photo). Tool holder type: TC40xER16x100-AD (SK40). Collet: ER16 – ZÜRN Germany. Working length: 100 mm. Manufacturer: Made in Germany. Tool included – ready for use. Very good condition, original, tested. Applications: CNC machining centers, milling machines, tool workshops. Lrodpfjxcb Daox Ahzsl

Condition: new, Self-centering 4-jaw chuck designed for mounting on lathes, rotary tables, and milling machines. Mounting according to DIN 55029. Hardened and ground working surfaces ensure a longer service life while maintaining accuracy and repeatability. Balanced scroll plate and chuck allow for higher rotational speeds during machining without excessive vibration. Mounts directly to the machine on a CAMLOCK-type spindle nose. Technical data: Parameter Value Unit Lathe chuck cast iron 4-jaw 3744 BISON A 200 mm Lodpfjyw Tupsx Ahzjrl Ratio 1:4 5 mm B 78 mm E 55 mm F 104.8 mm Q 6 J 29 mm Weight 19 kg Equipment: Lathe chuck One-piece hard external jaws One-piece hard internal jaws Key

Condition: excellent (used), For sale: Complete set of ATORN Germany tool holders – high quality, premium brand Hahn+Kolb. Technical specifications: • Manufacturer: ATORN • Model: 20723200 • Standard: DIN 69871 SK40-1/10-100 • Length: 100 mm • Set includes: several pieces, some with mounted drills (see photos) Condition: Very good, practically stored as new. Only used for testing, no operational wear. Suitable for CNC machining centers and milling machines. - Price per piece. Ledew Ulraopfx Ahzerl

Condition: excellent (used), For sale: Professional SK40 tool holder (designation: 83 814 114, SK-40 Ø14x80, no. 12409096) with mounted VHM end mill Ø14 mm. The holder is ventilated, providing efficient cooling and extended tool life. Multi-flute solid carbide end mill in very good condition – ideal for machining steel, cast iron, stainless steel, and other hard materials. Condition: used, fully functional. Lsdjw Rrxxopfx Ahzorl

Condition: used, Dividing Head Center Height: 100 mm Transmission Ratio: 40:1 Spindle Taper: SK 40 with M16 draw thread Clamping Surface: 240 x 200 mm Grid Pattern on Clamping Surface: 210 x 125 mm, Ø 14 mm - 3-jaw chuck Ø 125 mm with step jaws - Crank handle with indexing plate and sector arms - Crank handle with swing-out indexing plate for direct dividing - 1 indexing plate with hole counts: 15, 18, 21, 29, 37, 43, 51 - 1 indexing plate with hole counts: 16, 19, 23, 31, 39, 47, 53 - 1 indexing plate with hole counts: 17, 20, 27, 33, 41, 49, 57 - 24-position index (15° increments), graduated scale on work spindle - Complete dividing head, rotatable and tiltable on the base plate Dimensions (L x W x H): 410 x 370 x 300 mm Net weight: 48 kg Lodpfey E T Dgex Ahzorl Good condition

Condition: used, Thread cutting chuck BILZ Type DSPL 127 MK2 Thread size: M3 - M12 Mounting shank: MK 2 Length compensation: 30 mm Clamping range: Ø 2.5 - Ø 10 mm (tap shank diameter) - Chuck clamping for the tap shank and torque transmission on the square - Adjustable safety clutch for torque limitation - Length compensation +10 mm / -20 mm for precise pitch threading Maximum chuck diameter: Ø 58 mm Chuck length: 120 mm Total length with shank: 215 mm Net weight: 1.7 kg Very good condition Lrjdpfx Ahsy E T Dajzel