Used Maho 700 C for sale (467)

Condition: used, CNC Vertical Travelling Column Bed Milling Machine DECKEL MAHO Vertical Machining Center Type DMF 220 linear Serial No.: 15115223474 Year of manufacture: 2008 CNC 3-D contouring control Heidenhain iTNC 530 Travel X: 2200 mm, Y: 560 mm, Z: 720 mm Table size 2600 x 605 mm Table load capacity 2200 kg Table height above floor 870 mm Distance table to spindle nose max. 752 mm Spindle taper SK 40 (DIN 69871 A) - ISO40 with drawbar DIN 69872 Spindle speed max. 12,000 rpm Spindle drive 35 kW at 40% duty cycle / 25 kW at 100% duty cycle Feed rate 0–20,000 mm/min Rapid traverse X-axis 100 m/min Pedjw Iqt Aspfx Ah Asgu Rapid traverse Y+Z-axis 50 m/min Power supply 400 Volt, 50 Hz, 73 kVA - 30-position tool changer - Internal coolant supply through the spindle, 40 bar (IKZ) - Air blast with minimum quantity lubrication for tool cooling - Air blast through spindle center via M-function - 2 rotating safety windows - Operating mode 4, process monitoring during production - Electronic handwheel at the handheld command station - Separate coolant treatment system, paper band filter with filtration sump - Chip conveyor for positioning under the work area - Centralised grease lubrication - Operating manual - Operating hours – control on = 75,188 h - Operating hours – program run or spindle on = 31,632 h - Controller with interfaces for data transfer, RS232C + USB Footprint L x W x H 650 x 400 x 280 cm Space requirement for main machine L x W x H 490 x 395 x 275 cm (with control panel) Space requirement for chip conveyor L x W x H 550 x 90 x 160 cm (approx. 500 kg) Space requirement for coolant unit L x W x H 180 x 115 x 190 cm (500 kg) Main machine transport dimensions L x W x H 500 x 248 x 275 cm Additional transport space required for further parts 550 x 240 x 250 cm Weight of main machine approx. 12.5 t Good condition

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, table width: 850 mm, table length: 1,250 mm, table load: 1,800 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 60, CNC Heidenhain 530 WORKING AREA: Longitudinal travel X: 1,050 mm Transverse travel Y: 800 mm Vertical travel Z: 560 mm FEED RATES: Feed speed: 1–90,000 mm/min Rapid traverse X/Y/Z: 90/90/90 m/min SPINDLE: Power (40 / 100 % DC): 35/25 kW Torque (40 / 100 % DC): 130/86 Nm Spindle speed: 18,000 rpm Tool holder taper DIN 69871-A: ISO 40 TOOL CHANGER: Number of tools: 60 Max. tool diameter: 80 mm Max. tool diameter with adjacent positions free: 140 mm Max. tool length: 300 mm Chip-to-chip time: 6 sec TABLE: Clamping surface: 1,250 x 850 mm Max. load capacity: 1,800 kg Machine equipped with: Psdpfxjxqzgqs Ah Asgu • Linear motors on X, Y, Z axes • Tool presetting • Probe Year of manufacture: 2008

Condition: good (used), Year of construction: 2009, Machine will come with robot . Pedpfjxfu S Nsx Ah Aogu 42.000 rpm

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, Controller Millplus Table size 1700 x 1400 mm Table load max. 5000 kgs X travel 1800 mm Y travel 2000 mm Z travel 1500 mm B swewerling -7/180 Grad C axis 1/360 degree Spindle speed 10000 rpm Tool holder ISO50 ATC Magazin 60-fold Spindle power 29,4 kW Place required LxW = 4000 x 6000 mm Weight cca 38 tons Features, accessories - Chip conveyor - Coolant tank with high pressure pump - Coolant through spindle - Fast speed head in magazin - MPG Podsxpx Hljpfx Ah Asgu - Manuals Others: - The machine is recommended for retrofit or general overhauling Defects: - main spindle run loudly - B axis run lodly - some sensors are missing from magazin The machine must be checked deeply. The disassembling and loading on truck is on lasten of customer.

Condition: ready for operation (used), Year of construction: 2002, Technical details: X travel: 1,250 mm Y travel: 710 mm Z travel: 710 mm Table area: 1,500 x 800 mm Table load: 800 kg Spindle speed: 12,000 rpm Spindle motor: 15 / 10 kW Control: iTNC HEIDENHAIN Spindle taper: SK 40 Tool changer: 40 positions Psdpfx Ahsxq S Ncs Asgu Power consumption: 44 kVA Machine weight approx.: 10 t Space requirements approx.: 3.5 x 2.65 x 2.65 m 5-axis simultaneous machining center, B-axis (-120° / +30°), NC rotary table integrated in rigid table, direct measuring system, 3D probe Through-spindle coolant 20 bar, 600 l, Rinsing gun, Chip conveyor, Approx. 44,973 operating hours / 20,542 spindle hours

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 800 kg, total height: 2,800 mm, total length: 3,600 mm, total width: 2,400 mm, table width: 600 mm, table length: 1,250 mm, spindle speed (min.): 18,000 rpm, mount diameter: 450 mm, Equipment: documentation/manual, rotational speed infinitely variable, MANUFACTURER: DECKEL MAHO Psdjxfckmjpfx Ah Ajgu COUNTRY OF ORIGIN: Germany MACHINE TYPE: DMC 104 V LINEAR YEAR OF CONSTRUCTION: 2008 CONTROL UNIT: HEIDENHAIN TNC 530 TOOL HOLDER: SK40 X TRAVEL: 1040 mm Y TRAVEL: 600 mm Z TRAVEL: 500 mm SPINDLE SPEED: 12,000 rpm MAX. TABLE LOAD: 800 kg TABLE SIZE: 1250 x 600 mm NUMBER OF TOOLS IN MAGAZINE: 30 pcs. COOLANT SUPPLY: Yes MACHINE DIMENSIONS: L 3.6 x H 2.8 x W 2.4 m TOTAL WEIGHT (approx.): 8000 kg

Condition: good (used), Year of construction: 2008, 1 used vertical machining center Manufacturer: Deckel Maho Model: DMU 80 monoblock Pgjdpfx Ahoxa Eudo Aou Year of manufacture: 2008 Control: ITNC 530 Technical specifications X travel: 980 mm Y travel: 630 mm Z travel: 630 mm Control: iTNC 530 Total power requirement: 10 / 15 kW Machine weight approx.: 9.5 t Space requirements approx.: 4*4*2.5 m Additional information Equipment: Electronic handwheel Operation mode 4 Manual swivel milling head Motor spindle 12,000 rpm SK 40 / Clamping DIN 69872 32-tool magazine Fixed table 1250 x 700 mm Chip conveyor Coolant system

Condition: good (used), Year of construction: 2004, operating hours: 4,850 h, functionality: fully functional, controller model: iTNC530, The machine has only 1021 spindle hours. Has seen little use. 4th axis Paul Lehmann NC dividing head. Pgjdpfxoxn S Uyj Ah Asu

Condition: ready for operation (used), Year of construction: 2001, - USED - 5-AXIS VERTICAL MACHINING CENTRE WITH ROTARY AND TILTING TABLE X-AXIS TRAVEL: 500 mm Y-AXIS TRAVEL: 400 mm Pedpfx Ajwl R Dqoh Ajgu Z-AXIS TRAVEL: 400 mm SPINDLE: 9000 rpm; 13 kW; HSK 63 B-AXIS: -10° +95 ° C-AXIS: 360 ° TABLE SIZE: 700 x 500 mm MAX ADMITTED LOAD: 200 Kg TOOL MAGAZINE: CHAIN-TYPE ; 16 POS CONTROL UNIT: HEIDENHAIN WEIGHT: 3000 Kg OVERALL DIMENSIONS: 2000 x 1520 x 2140 mm ACCESSORIES: SWARF CONVEYOR NOTE: MANUAL 5th AXIS

Condition: good (used), Year of construction: 2002, Travel paths X/Y/Z: 560/560/510 mm Max. spindle speed: 18,000 rpm Tool holder: HSK 63A, 40 positions Pjdpfx Ahjxlznko Asgu Table clamping surface: 400 x 400 mm Control: Siemens 840D

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,797 h, functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, swivel angle B-axis (min.): -30 °, swivel angle B-axis (max.): 90 °, TECHNICAL DETAILS Pedpfx Aoxf A E Rsh Aogu Control: MillPlus iT Heidenhain X travel: 880 mm Y travel: 630 mm Z travel: 630 mm B axis: -30° / +90° C axis: available Spindle and Drive Spindle speed: 20 - 12,000 rpm Spindle taper: SK 40 DIN 69871 Torque at 40 % / 100 % duty cycle: 28 / 19 kW Table and Workpiece Table size: 1,250 x 700 mm Table load capacity: 650 kg NC rotary table: Ø 800 mm Tool Magazine Tool change system: 2 × 16 positions MACHINE DETAILS Operating hours: 43,802 h Spindle hours: 17,797 h Total power requirement: 44 kW Machine weight: 9.5 t Space requirements: 3.50 × 3.20 × 2.60 m Coolant system standard volume: 250 liters EQUIPMENT - Renishaw OMP60 probe - Rotoclear - Rinse gun - High-pressure pump - Chip conveyor - Air filtration system - ICS (internal coolant supply)

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand SIEMENS Model 840D Powerline Pjdpfx Aexbun Neh Aegu Main Drive Number of axis 4 Tools Type of tool holder HSK63 Additional Equipment Pallet changer: RS4 Tool magazine: Omron This 4-axis DECKEL MAHO DMC 70H duoBlock was manufactured in 2008. A robust horizontal machining centre, it offers advanced capabilities for complex machining tasks. Consider the opportunity to buy this DECKEL MAHO DMC 70H duoBlock horizontal machining centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2003, x-travel 780 mm y-travel 560 mm z-travel 560 mm Pgedpfx Aswm Rrweh Aou tool taper SK40 control HEIDENHAIN iTNC 530 weight of the machine ca. ca.12,5 t required space 3,40 x 3,30 x 2,60 m DECKEL MAHO DMC 60T BJ 2003 Operating hours: 32532.7 The machine DMC 60T (1659) is in very good condition and is ideally suited for precise milling operations thanks to powerful motor spindles, high feed rates, and a flexible tool magazine. All technical details can be found below. Working range Travel distance/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Worktables NC rotary table – clamping surface, pallet: diameter 500 x 630 mm Centering bore: diameter 50^H6 20 deep mm Locating bore: diameter 20^H6 20 deep mm Torque of the table at: – 100% duty cycle: 1603Nm – 25% duty cycle: 2813Nm Max. rotation of the table: 30 rpm Feed: 7200 ./min. Permissible table load: 400 kg Tool magazine with magazine SK 40 Feed drive AC servo motors in digital technology for axis X, Y, Z Feed speed X-, Y-, Z-axis infinitely programmable: 20–15000 mm/min. Rapid traverse X-, Y-, Z-axis: 50 mm/min. Setup operation X-, Y-, Z-axis: 20–2000 mm/min Measuring system Resolution | X-, Y-, Z-axis: 0.001mm Input unit | X-, Y-, Z-axis: 0.001mm Position tolerance | X-, Y-, Z-axis: 0.010mm Working area Travel/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Spindle main speed: 18000min^-1 Speed Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Main drive 24000 min^-1: motor spindle without gearbox Speed Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Weight Machine with tool changer and transport base: approx. 10100kg Installation weight Machine with fixed table and tool changer: max. 11500kg Dimensions Machine: 3.40 x 3.30 x 2.60 m Chip conveyor: 2.77 x 1.00 x 2.07 m Band filter system 900l: 2.22 x 1.40 x 2.20 m

Condition: good (used), Year of construction: 2003, travel distance X-axis: 3,900 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, rapid traverse X-axis: 100,000 m/min, rapid traverse Y-axis: 60,000 m/min, rapid traverse Z-axis: 60,000 m/min, workpiece weight (max.): 2,200 kg, table width: 900 mm, table length: 4,200 mm, 5-axis CNC machine (VMC) DECKEL MAHO - DMF 360 Linear HSK-A63 Spindle Pendel screen Production package IKZ 40 Bar Pjdpfx Ahow Rdyho Ajgu Filter capacity 23 L/Min Coolant tank 900 L Last DMG Repair in 2023 for 11.000 EUR    X - Travel: 3900mm Y - Travel: 920mm Z - Travel: 820mm B - Axis: 108° Table Length: 4200mm Table Width: 900mm Table load: 2200 Feed rate X-Axis: 100000mm/min. Feed rate Y-Axis: 60000mm/min. Feed rate Z-Axis: 60000mm/min. Spindle Taper: 63ISO/Bt/Mk Power on spindle: 35kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:40 Number of controlled axis: 3+1 Chip conveyor: Yes Coolantsystem: Yes Length: 8500mm Width: 3450mm Height: 2910mm Weight: 30700kg

Condition: good (used), functionality: fully functional, Control system: Heidenhain TNC 430 Worktable length: 800 mm Pgsdpfx Ahewa A Rxe Aou Worktable width: 500 mm 24-station tool changer Maximum table load (uniform): 500 kg Maximum vertical spindle speed: 8000 rpm X-axis travel: 630 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Taper: SK40 Machine height: 2400 mm Machine length: 3100 mm Machine width: 2100 mm Machine weight: 4200 kg Available immediately from location.

Condition: excellent (used), Year of construction: 1989, Philips CNC 432 control Travel paths X/Y/Z 600 x 400 x 450 mm Pedexc N Iyjpfx Ah Aogu Spindle speed 4,000 rpm 20-position tool magazine SK 40 4th axis Lehmann

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 700 mm z-travel 600 mm NC-rotary table ø 900 x 630 mm spindle taper SK 40 spindle turning speed - stepless 20 - 12.000 U/min Pgjdpfx Ajw Eyhfoh Aou feeds x/y/z -stepless 20 - 10.000 mm/min rapid travel x/y/z 24 m/min control HEIDENHAIN, TNC 426 NC-rotary table - speed - max. 10,7 U/min NC-rotary table - feed - 3600 °/min table load capacity max. 800 kg no. of tools in magazin 30 tool diameter if 2 vacant positions 160 mm tool diametre at full load 100 mm tool length - max. 315 mm weight of tools max. 10 kg total power requirement 44 kVA = 5 axis (simultan) machining center - NC rotary table = C-axis - univ. milling head = B-axis Accessories: 30 tool fixtures, electron. hand panel, chip conveyor, coolant with filtration

Condition: ready for operation (used), Year of construction: 2001, operating hours: 88,546 h, Control Unit Brand SIEMENS Model 840D Pgedpsxg Umvsfx Ah Aou Main Drive Number of axis 4 Movement X-Axis Movement 800 mm Y-Axis Movement 710 mm Z-Axis Movement 710 mm This 4-axis DECKEL MAHO DMC 80 H horizontal machining center was manufactured in 2001. It features a SIEMENS Sinumerik 840D CNC control, a spindle speed of up to 6000 RPM, and a 40-position tool changer. Additional highlights include dual 630 x 500 mm pallets, SK50 spindle taper, and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMC 80 H horizontal machining center. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2011, Very good condition! Pedsxdfgnopfx Ah Aegu Control: Siemens 810D Shopmill Spindle speed: max. 8,000 rpm Spindle mount: SK40 tool magazine: 16 seats Travel: X-500 mm, Y-450 mm, Z-400 mm Swivel rotary table : -5 / +110

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Technical Data: Deckel Maho DMC 103V - Year of manufacture: 2002 - Control system: Heidenhain TNC 426 (electronic handwheel) - Travel: X - 1000 mm, Y - 600 mm, Z - 600 mm Working Spindle: - Max. spindle speed: 10,000 rpm - Tool holder: SK40 Table: - Clamping area: 1200 x 600 mm - Table load capacity: 800 kg Tool Magazine: - Number of tool positions: 24 Operating Hours: - Machine on: 49,189 hrs (see photo) - Spindle on: 17,590 hrs (see photo) (spindle replacement, NEW spindle has run approx. 14,000 hrs) Options: - External coolant supply - Documentation, machine manuals Pjdpfjxcyrvox Ah Ajgu Accessories: - 1 tool trolley equipped with SK40 tool holders (see photo) - 1 3D probe (see photo) Delivery Time: - Immediately Special Features: - Machine is ready for immediate operation. - Machine is available for immediate delivery. - The machine can be inspected and tested under power on site. - Machine is loaded free on truck. - Forklift for loading is available. - Transport can be organized upon request.

Condition: good (used), Year of construction: 2002, HEIDENHAIN TNC 430 control Spindle speed 20–9,000 rpm Travels X = 500, Y = 400, Z = 400 mm Pgodpowglfxofx Ah Aeu Tool holder SK 40 16-station tool changer Rotary table with B and C axes Clamping surface Ø 700 x 500 mm Max. table load 200 kg Infrared probe for workpiece measurement

Condition: excellent (used), Year of construction: 2000, Hello I have for sale a Deckel Maho DMU 60T machining center Control: Heidenhain 430 Technical condition of the machine - perfect Year of production: 2000 Country of Manufacture: Germany Podpfx Ahetyk Hme Ajgu Machine parameters: Axis travel "X" : 630mm "Y" axis travel: 560mm Z" axis travel 560mm Torsion head Maximum spindle speed 18,000 rpm. Tool storage: 24pcs(2x12 tools) Heidenhain measuring scales on all axes Walking through spindle Chip conveyor High-pressure cooling system central lubrication hydraulic tool clamping spindle taper SK40 Full programming instructions Documentation Included in the price loading and transport by forwarding within the country The price also includes training in programming and operation of the machine We take care of all procedures related to obtaining leasing Stal-Com company for 17 years we are engaged in sales, service and training on CNC machines from DMG group. We specialize in all models of Gildemeister lathes and Deckel Maho Machining Centers. All machines undergo a meticulous technical inspection. In addition to customers from Poland, our machines are also bought by customers from all over Europe and parts of Asia. Each machine can be checked during production as we also do machining. After purchasing a machine from our company, we provide training for the crew as well as we can set up the production of details at the customer's site. We cooperate with many companies on a permanent basis to which we provide further machine tools.

Year of construction: 1987, condition: used, machine/vehicle number: 63658, movement x: 600 mm movement y: 400 mm movement z: 400 mm spindle taper: ISO 40 spindle turning speed range: 80 - 4000 rpm carriages continuously adjustable: 0,1 - 1500 mm/min rapid move: x u. y/z 4/2,5 m/min electrical connection: 380 V, 16 kVA kW Pgsdsbv Haajpfx Ah Aou space needed: 2450 x 2200 x 1900 mm weight: 2250 kg

Condition: ready for operation (used), Year of construction: 2016, Control Unit Model ITNC 530 Pjdpfx Aoxpyv Ujh Ajgu Main Drive Tool taper SK40 Number of axis 5 Movement X-Axis Movement 735 mm Y-Axis Movement 650 mm Z-Axis Movement 550 mm Additional Equipment Graphite package options Mist extractor (external) This 5-axis DMG DECKEL MAHO DMU 65 monoBLOCK milling machine was manufactured in 2016. It features a robust X-Y-Z travel of 735mm, 650mm, and 550mm, and is equipped with an SK40 spindle and an ITNC 530 control system. Additionally, it includes a graphite package with an external mist extractor. Ideal for complex machining tasks, the DECKEL MAHO DMU 65 monoBLOCK machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 1988, condition: used, machine/vehicle number: 82053, table mounting size: 600 x 1100 mm movement x: 800 mm movement y: 450 mm movement z: 500 mm tailstock stroke: von Hand ca. 50 mm spindle turning speed range: 63 - 3150 rpm carriages continuously adjustable: 0,1 - 1500 mm/min rapid move: x/y/z 4,5/2,6/3 m/min electrical connection: 380 V, 5,5 kW space needed: 3000 x 2500 x 2030 mm weight: ca. 4000 kg control 432 with graphic Podpfx Ajxnp Djh Aegu