Used Maho 700 C for sale (438)

Condition: used, Year of construction: 2009, x-travel 800 mm y-travel 800 mm Lsdpfsx Tiy Tsx Al Neac z-travel 800 mm control SIN840D spindle turning speed - stepless 5 - 10.000 U/min power capacity at 40 % load 38,00 KW power capacity at 100 % load 25,00 kW max. torque at 40% / 100% load 288 / 187 kW spindle taper HSK 100 feed X/Y/Z/-axis 0 - 60.000 mm/min rapid traverse X/Y/Z 60,00 m/min feed capacity X/Y/Z 12,00 kN B - axis 180 x 0,001 ° rapid travel B-axis 10,00 U/min size of pallet 800 x 630 mm table load 0,80 t C-axis 360 x 0,001 ° rotary table speeds infinitely variable 1 - 800 U/min power capacity - table 13,85 kW max. torque on the faceplate 1.550 Nm toolpiece magazine: chain magazine 60 Stück tool diameter 110 mm wotkpiece diameter with 2 vacant positions 230 mm tool length - max. 450 mm weight of tools max. 30,00 kg total power requirement 80,00 kW weight of the machine ca. 18,00 t dimensions of the machine ca. 7,50 x 5,50 x H3,50 m 5-axis machining center with SIEMENS SIN840D coolant filer system 980l, chip conveyor, coolant through the spindle, extraction, BLUM tool measurement, measuring probe, operating mode 4, tool cone cleaning, hydraulic clamping with proportional valve.

Condition: used, Year of construction: 2011, operating hours: 34,300 h, functionality: fully functional, machine/vehicle number: 1190 000077 3, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece weight (max.): 1,200 kg, total height: 3,100 mm, total length: 4,850 mm, total width: 4,350 mm, table width: 680 mm, table length: 680 mm, rotational speed (max.): 10,000 rpm, overall weight: 16,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 13,400 h, coolant supply: 40 bar, input voltage: 4,000 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMC 80H duoBLOCK – 4-Axis Horizontal Machining Center with Pallet Changer – Used For sale is a used horizontal machining center, model DMG MORI DMC 80H duoBLOCK. The machine is currently still in productive operation and is reliably used for series production. It is primarily utilized for machining steel and cast materials. Condition: Fully functional and ready for operation. Inspection under power possible by appointment. Equipment: 4-axis machining Horizontal design for efficient chip evacuation Pallet changer to minimize non-productive times DuoBLOCK construction for high stability and precision Tool changer Spacious work area for complex components Further equipment details available on request Application area: Ideal for series production and demanding machining tasks in mechanical engineering, toolmaking, and industrial applications. Sales conditions: Price ex-foundation Disassembly, removal, loading, and transport to be arranged by the buyer Inspection by appointment possible Price negotiable Lasdsy Iwdpopfx Al Njc Delivery according to EXW (Ex Works)

Condition: good (used), Year of construction: 2000, operating hours: 74,800 h, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: iTNC 430, spindle speed (max.): 18,000 rpm, operating hours of spindle: 28,000 h, coolant supply: 40 bar, Equipment: chip conveyor, IKZ (internal coolant supply) NC rotary table (C-axis) NC swivel head Tool holder: HSK 63 FD function Pallet changer Lasdpfx Aljy Ep Rto Nec Measuring systems: infrared probe for workpiece measurement Additional magazine with 120 spaces Spindle has already been replaced

Condition: good (used), Year of construction: 2001, functionality: fully functional, operating hours: 4,550 h, Controller SIEMENS SINUMERIK 810/840D Table size 800 x 500 mm Table load 500 kg X travel 630 mm Y travel 500 mm Z travel 500 mm Spindle speed 8000 rpm Tool holder type SK40 ATC magazin 24-fold Repid speed 30 m/min Weight 4500 kgs Dimensions LxWxH = 3100 x 2100 x 2400 mm Accessories Lsdpfx Aljy T I Ays Neac - Coolant tank - Manuals The machine was used barely. Good condition.

Condition: excellent (used), Year of construction: 2005, x-travel 835 mm y-travel 510 mm z-travel 510 mm CNC-control SIEMENS table-size 1000 x 560 mm max. table load 800 kg spindle taper SK 40 spindle turning speed range 20 - 8.000 U/min feed stepless 1 - 20.000 mm/min rapid traverse 20 m/min drive capacity - spindle motor 13 / 9 kW tool change unit 20 Pos voltage 380 V total power requirement 35 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 3,50 x 3,50 x 2,70 m - Serial-No.: 15415015634 - Main spindle NEW bearings - Machine ON: 18,484 h Program ON: 9,153 h - SIEMENS control system - With NC sub-unit (4th axis, controlled via M-code) - Chip tray (no chip conveyor) Laedpfx Aljyxxyyj Nsc - Coolant system

Condition: excellent (used), Year of construction: 2010, operating hours: 10,370 h, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,035 mm, feed length Y-axis: 560 mm, feed length Z-axis: 510 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 17 kVA, torque: 83 Nm, controller manufacturer: Siemens 810D, total height: 2,758 mm, total length: 3,137 mm, total width: 3,355 mm, table width: 560 mm, table length: 1,200 mm, table load: 1,000 kg, overall weight: 4,250 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 13,362 h, number of slots in tool magazine: 20, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, - Year of manufacture: 2010 - Condition: good, used - Control: Siemens 810D - Table: 1200 x 560 mm - Travels: 1,035 x 560 x 510 mm Lsdpfezbhvbex Al Nsac - Spindle speeds: 20 - 8,000 rpm We are still working on this machine. It is a good machine.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 11,900 h, travel distance X-axis: 635 mm, number of axes: 3, This 3-axis DECKEL MAHO DMC 635 V was manufactured in 2006. It features an X-axis travel of approximately 635 mm and operates on a supply voltage of 400 V, 3-phase. With a rated power of 35 kVA, this vertical machining centre is designed for efficient performance. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 635 V machine we have for sale. Contact us for further details. Lajdpfx Alsyycu Ro Noc • Supply voltage: 400 V, 3-phase + PE • Frequency: 50/60 Hz • Rated power: 35 kVA • Rated current: 64 A • Maximum current: 50 A • Control voltage: 230 V AC / 24 V DC

Condition: used, Year of construction: 2008, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Siemens 840D powerline spindle tunring speed 8.000 U/min drive capacity - main spindle 100/40% ED 32/44 kW tool taper HSK-A 100 number of tool places 354 Pos. rapid traverse ( x / y / z ) 60 m/min size of pallet 800 x 800 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: - NC rotary table with pallet carrier - Rotary pallet changer - 40 bar internal coolant supply - Rotating viewing window - Wall-mounted magazine with 300 magazine positions - Rotating wall tool lock, 30 positions (inactive) and 54 positions (active) - Infrared measuring probe - SK 50 mechanical tool breakage detector - Tool identification - 4-color signal lamp Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Lsdpfjxcp R Uox Al Nsac Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm Q U O T A T I O N Ledpfx Aljv Td Ele Neac We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DECKEL MAHO CNC Universal Milling Machine model DMU 50 M year 1998 Working range: Longitudinal stroke X Axis 500 mm Vertical stroke Z Axis 400 mm Cross stroke Y Axis 400 mm C-axis – table turning, manual 360 ° B-axis – table swivelling, manual ° Table area Ø 700 x 500 mm Inclination range of table (manually) + / - ° Rotation of table (manually) 360 ° Max. Table load approx. 200 kg Maximum distance table – spindle nose 550 mm horizontal distance machine – spindle nose 2 – 6 mm Tool holder Taper ISO 40 Spindle speeds 20 – 4,500 rpm Feed rate max. 5.000 mm/min AC main drive, 0% / 40% power-on time approx. 9 / 13 kW Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features • 3 Axis HEIDENHAIN Point to Point Control Model TNC 124 with Monitor, direct programming and input of data and electronic handwheels. • All 3 axis are operated by the milling head, the table is stationary so also out of proportion workpieces can be machined. • Rotary Table can be manually rotated 360° and manually inclined + / -° (each with clamping). The digital read-out of the angles is integrated in the CNC control • Simple coolant unit with pump and tank, built-on switch cabinet (SIEMENS parts) • Pneumatic tool claomping, Some tool holders available, manuals, CE-Certificate, etc. Condition : very good condition ! Ideal for training center or single parts machining ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 0 % Net, after conclusion of contract, before loading We always have a large selection of milling machines - CNC or conventional - available. Please let us know your requirements.

Condition: ready for operation (used), Year of construction: 1997, operating hours: 19,831 h, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, total height: 2,700 mm, total width: 2,800 mm, table load: 500 kg, overall weight: 4,500 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, product length (max.): 3,300 mm, number of axes: 3, This 3-axis DECKEL MAHO DMC 63V vertical machining centre was manufactured in 1997. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine is equipped with a tool magazine capacity of 24 tools and a maximum spindle speed of 8000 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 63V machine we have for sale. Contact us for further details. • Table: • Size: 800 × 500 mm • Operating hours: 19,831 h (actual counter from control) • Condition: Powered, connected, and fully operational Lasdpfsyw Rmvex Al Njc • Note: Control upgrade from Sinumerik 810D to 840D Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2012, operating hours: 5,039 h, functionality: fully functional, machine/vehicle number: 1539000771E, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,035 mm, feed length Y-axis: 560 mm, feed length Z-axis: 510 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 17 kVA, torque: 83 Nm, workpiece weight (max.): 1,000 kg, total height: 2,758 mm, total length: 3,137 mm, total width: 3,355 mm, table width: 560 mm, table length: 1,200 mm, table load: 1,000 kg, rotational speed (max.): 8,000 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 5,039 h, spindle motor power: 13 W, number of spindles: 1, number of slots in tool magazine: 20, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Under power Lodjyf E Shspfx Al Nsac

Condition: excellent (used), Year of construction: 2010, operating hours: 13,362 h, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,035 mm, feed length Y-axis: 560 mm, feed length Z-axis: 510 mm, nominal power (apparent): 17 kVA, torque: 83 Nm, controller manufacturer: Siemens 810D, total height: 2,758 mm, total length: 3,137 mm, total width: 3,355 mm, table width: 560 mm, table length: 1,200 mm, table load: 1,000 kg, overall weight: 4,250 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 13,362 h, number of slots in tool magazine: 20, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, - Year of manufacture: 2010 - Condition: good, used - Control: Siemens 810D - Table: 1200 x 560 mm - Travels: 1,035 x 560 x 510 mm - Spindle speeds: 20 - 8,000 rpm Ljdpfxeyf Hymo Al Njac

Condition: good (used), CNC control, card slot, control cards, plug-in cards, circuit boards, control rack Laodpfoq T T Nhex Al Njc -Manufacturer: Philips, control rack from CNC milling machine MAHO MH 800C -PCB: 4022 224 7062 -Card: 4022 224 3433 -Graphic Modem: 4022 224 3451 -Cent Proc: 4022 226 2331 -Drive Mod.: 4022 226 3645 / 4022 226 3690 -LS/LS board: 4022 226 3680 -Inp Outp Mod: 4022 226 3531 2 pieces -Power supply: 4022 226 2270 PE 1870/03 -Individual components: see photos -Price/sale: complete -Dimensions: 375/310/H340 mm -Weight: 13.4 kg

Condition: used, Year of construction: 2004, operating hours: 38,958 h, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, feed length X-axis: 750 mm, feed length Y-axis: 600 mm, feed length Z-axis: 560 mm, nominal power (apparent): 73 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, table width: 650 mm, table length: 950 mm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 37,462 h, spindle nose: HSK63, number of slots in tool magazine: 30, input voltage: 400 V, We are offering this used Deckel Maho DMC 75 V linear vertical machining center, year of manufacture 2004. Details: Year: 2004 Program run time: 38,958 hours Lasdpfey Dr Hkex Al Njc Spindle hours: 37,462 hours Rapid traverse: 90 m/min Travel range X-750/Y-600/Z-560 mm Spindle HSK63 18,000 rpm Tool magazine with 30 stations Direct path measuring system Table size: 950 x 650 mm Heidenhain iTNC 530 External air blast Rated power: 73 kVA Max rated current Jn: 105 A Rated current: 125 A Line voltage: 400 V Frequency: 50/60 Hz Secondary voltage: 230 V Auxiliary voltage: 24 V Accessories: WITHOUT accessories such as tool holders and zero-point clamping system. If you have any questions or need further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 79,500 h, functionality: fully functional, machine/vehicle number: 11710000713, travel distance X-axis: 700 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, controller model: HEIDENHAIN iTNC 530, workpiece weight (max.): 600 kg, The machine spindle was replaced according to DMG in 2022. A measurement protocol for the machine is included! TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 700 mm Travel Z-axis: 700 mm Spindle speed: 18,000 rpm Spindle torque: 110 / 84 Nm Spindle power: 34 / 28 kW Tool holder: SK 40 Tool changer: 180 positions Pallet size: 500 x 500 mm Max. workpiece weight: 600 kg Rapid traverse: 60 m/min MACHINE DETAILS Control: HEIDENHAIN iTNC 530 Total connected load: 68 kVA Dimensions & Weight Space requirements: 9.5 x 7.5 x 3.4 m Machine weight: 10.5 t Operating Hours Spindle hours: 79,500 h Power-on hours: 112,000 h EQUIPMENT NC rotary table RS 10 pallet rotary storage, total of 12 pallet stations iTNC operator panel for the loading station ICS 40 bar (production package) Through-spindle air blast Ledpjyvp Dksfx Al Noac BA 4 2/4 hydraulic clamping for worktable and set-up station BLUM laser (prepared) Oil mist separator TS 649 probe Mechanical tool breakage detection SDS (Spindle Diagnostic System) Rinse gun Electronic handwheel Chip conveyor

Condition: ready for operation (used), Year of construction: 2001, operating hours: 85,355 h, functionality: fully functional, machine/vehicle number: 71.405627, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain Millplus, table width: 630 mm, table length: 500 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Number of pallets: 2 pcs Pallet clamping surface: 500 x 630 mm Max. load pallet changer (one-sided): 600 kg Max. load pallet changer (double-sided): 1,200 kg Max. table plate rotation: 13.6 rpm Feed rate: max. 15,000 mm/min Rapid traverse speed: max. 40 m/min Set-up operation: 2,000 mm/min Magazine positions: 60 slots Max. tool weight: 10 kg Max. tool diameter: 100 mm Max. tool length: 350 mm Measuring System Resolution: 0.001 mm Input increment: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Control: Heidenhain Millplus Dimensions & Weight Machine without tool magazine: 8,400 kg Weight of tool magazine (60 tool positions): 600 kg Floor dimensions: 4.50 m × 2.72 m × 2.63 m Electrical Data Rated power: 44 kVA Current consumption, maximum: 64 A Current draw: 80 A Lodpeyfhahjfx Al Noac Supply voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Operating Hours Power-on hours: 96,878 h Spindle hours: 85,355 h

Condition: like new (used), Year of construction: 2013, operating hours: 39,945 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain iTNC 530, total height: 2,900 mm, total length: 5,500 mm, total width: 2,650 mm, spindle speed (min.): 28,000 rpm, coolant supply: 40 bar, Year of construction: 2013 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360º (0,0001) A-axis degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 13 Milling/turning table nc: Number of pallets: System 3R (21 pallets type GPS 240, 30pallets type GPS 120 and 24 pallets type ITS50) Table dimensions mm: baseplate for root pallet Maximum workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm) and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Spindle speed rpm: 28000 Spindle drive power kW: 35/25 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 120 Tool changer: Double gripper Equipment Electronic Handwheel Chip conveyor Infrared probe Lsdpfx Aljxv Av Rs Neac Internal cooling lubricant supply Rotating inspection windows Rinsing gun blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and diameter 3D quickSET Arrangement for external pallet management Accuracy package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Toolholders are not included Tools are not included Paper band filter Machine running times Under power: 62983 Spindle Working: 39945 Rated power kVA: 60 Basic machine dimensions / weight Length mm: 5500 Width mm: 2650 Height mm: 2900 Weight kg: 9500 + system 3R

Condition: like new (used), Year of construction: 2009, operating hours: 47,443 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, number of slots in tool magazine: 180, controller manufacturer: Siemens, total height: 2,900 mm, total length: 4,950 mm, total width: 5,060 mm, overall weight: 14,000 kg, table length: 630 mm, table width: 800 mm, controller model: 840D-Powerline, torque: 980 Nm, coolant supply: 40 bar, feed length X-axis: 800 mm, feed length Y-axis: 800 mm, feed length Z-axis: 800 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, spindle motor power: 32,000 W, rapid traverse Z-axis: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rotational speed (max.): 8,000 rpm, spindle speed (max.): 10,000 rpm, table load: 1,000 kg, operating hours of spindle: 22,963 h, CNC controller: Siemens 840D-Powerline Axes X-axis travel mm: 800 Y-axis travel mm: 800 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 2 Table dimensions mm: Ø800x630 Max. workpiece weight kg: 1000 Table rotation speed rpm: 8000 max. torque Nm: 980 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 180 Chip-to-chip time s: 4.5 Equipment Electronic Handwheel Chip conveyor Lasdpjui Np Rsfx Al Nec Infrared probe Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Signal lamp 3D quickSET Machine interface for FASTEMS system Paper band filter Machine running times Under power: 47443 Spindle Working: 22963 Basic machine dimensions / weight Length mm: 4956 Width mm: 5064 Height mm: 2900 Weight kg: 14000

Condition: ready for operation (used), Year of construction: 2006, operating hours: 17,450 h, travel distance X-axis: 835 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: 840D with ShopMill, table width: 560 mm, table length: 1,000 mm, table load: 800 kg, overall weight: 4,200 kg, number of axes: 4, This 4-axis DMG DECKEL MAHO DMC 835V was manufactured in 2006. Ideal for precision vertical machining, this used machine maintains robust functionality despite its years. Consider the opportunity to buy this DMG DECKEL MAHO DMC 835V vertical machining centre. Contact us for more information. Additional equipment • Linear Encoder Measuring System Laedpfxeyrd Hwj Al Nec • A-axis • Electronic Handwheel • Internal Coolant – 25 bar / 30 l/min • Cabin Roof • New Spindle Bearings Machine Benefits Technical Machine Benefits • Tool mountings: sk 40 Extra Information Machine still under power Dimensions Machine Depth 2100 mm

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: SIEMENS, controller model: 840 D, table width: 500 mm, table length: 500 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 20,000 W, number of slots in tool magazine: 303, number of axes: 4, This DMG DMC 60H Linear Horizontal Machining center was manufactured in the year 2013 and has 46048 production hours. It is equipped with a Siemens 840 D control unit and has 4 axis. The machine has a spindle speed of 18000 rpm. See original delivery note as PDF (German) attached to see all technical positions. Additional equipment • Scraper belt chip conveyor with coolant system 980 liter, paper belt filter, discharge height 950 mm, width 380 mm, IKZ 80 bar / 14 l/min through spindle center (AD), pressure infinitely programmable, selectable via NC program, Roof flushing of the working area 180 l/min via flushing nozzles with a ripple valve • Rotating viewing window / work area door • Flushing gun with pump • Double gripper • Wheel magazine • NC rotary table Ø 630 mm • 3D path control Machine Benefits Qualitative Machine Benefits • Mcis tdi tool management (module tdi machine) - overview , tool handling, planning • Extraction mechanical and electrical preparation for oil mist extraction • Tool breakage check mechanical design Technical Machine Benefits • Number of pallets: 12 // round pallet storage: rs 12 • Rotary pallet changer // work table with pallet support // permissible load: 600 kg // 2 pallets 500 x 500 mm with t-slots // pallet management // pallet changer cladding // claw flushing pallet • Cooling through the spindle center: 80 bar • Tool magazine: wheel magazine (5 wheels) with 303 magazine slots hsk a63 • Infrared measuring probe renishaw pp60 optical (omp60) hsk-a 63 • Mpc machine protection control (machine protection through rapid shutdown) • Laminated glass safety pane for right-hand cabin door window Extra Information Ledoyi Ekfepfx Al Nsac Documentation and Electrical circuit diagram (German) available

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,478 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D powerline, table load: 600 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It features a Siemens 840D control unit, a spindle speed of 10,000 rpm, and a tool changer with 20 positions. The table measures 790 x 560 mm with a maximum load of 600 kg. Rapid traverse rate is 30 m/min. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V vertical machining centre. Contact us for more information about this machine. • Operating hours: 19,478 h • Table size: 790 x 560 mm • Rapid traverse: 30 m/min Lajdoyca Npepfx Al Nsc • Tool changer: 20 positions • Condition: Both machines are in good working condition Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,641 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D powerline, table load: 600 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2008. It features a Siemens 840D control unit, a spindle speed of 10,000 rpm, and a tool changer with 20 positions. The machine offers a table size of 790 x 560 mm and a maximum table load of 600 kg. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information. • Operating hours: 17,641 h • Table size: 790 x 560 mm • Rapid traverse: 30 m/min Lasdpfx Aljyca I Sj Nec • Tool changer: 20 positions • Condition: Both machines are in good working condition Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2001, operating hours: 16,799 h, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMC 80 U hi-dyn was manufactured in 2001. It features a rotary speed of up to 12,000 rpm, a B-axis automatic swivel milling head, and a C-axis NC rotary table measuring 900 x 630 mm. The machine includes a 60-position tool magazine, Heidenhain control system, dual pallet changer, and an internal coolant supply at 40 bar. Consider the opportunity to buy this DECKEL MAHO DMC 80 U hi-dyn universal machining centre. Contact us for more information. • B-axis automatic swivel milling head • C-axis NC rotary table: 900 x 630 mm • Tool magazine: 60 positions • Heidenhain control system Additional equipment • Dual pallet changer • Coolant temperature control system • Chip conveyor • Internal coolant supply 40 bar • Paper belt filter • Rotating viewing window • Cleaning gun • Oil and emulsion mist separator Technical Specification Taper Size SK 40 Laedpfx Alsx H U D Re Nec

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 12,000 rpm, spindle motor power: 25,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMC 60U RS5 was manufactured in 2004. Ideal for precision vertical machining, this used machine represents a valuable addition to any workshop. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60U RS5 vertical machining centre including a Schuler automation. Contact us for more information. Additional equipment • Tool Changer & Magazine: Horizontal Double Gripper / Magazine Type: Chain Magazine / Capacity: 60 Tool Places / Tool Clamping: According to DIN 69872 / Tool Breakage Control: Mechanical Version Lsdpfx Aeyaam Asl Nsac • Schuler automation • Coolant Tank: 900 L • IKZ: Form AD with Paper Band Filter • Measuring Probe: Heidenhain TS 641 (Infrared) • Tool Measurement: Blum Laser for Tool Length & Diameter Measurement Horizontal/Vertical • Rotating Viewing Window Machine Benefits Technical Machine Benefits • Production hours: 54347 operating hours, spindle hours 26748 (new spindle has 3,500 hours) • Universal milling head with controlled b-axis • Very well maintained machine operated for high-end applications • Spindle replacement in 2021 at a cost of approximately 40000 euros • Checkbook maintained Extra Information Disc changer and 4 pallets are included Control 3D Haidenhein contouring control "Millplus IT with Millplus IT handwheel"Optional: more palletsServiced regularlyGeometry protocol dated 5 February 2026Regrinding of the spindle cone: €1,500–€3,000

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, number of axes: 5, This DMG DECKEL MAHO DMC 60T was manufactured in 2005. A Universal machining centre, it offers robust construction and reliable performance for precision machining tasks. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60T Universal machining centre. Contact us for more information. Machine Benefits Technical Machine Benefits • Machine with nc rotary table and tool magazine for 60 tools: approximately 9610 kg • Belt filter system 900 l: approximately 850 kg • Installation weight of machine with max weight for workpiece, tools, and operating materials, belt filter system: maximum 11500 kg • B-axis complelty overhauled Extra Information Machine still under power // Contril unit: Heidenhain: MILL PLUS 2-fold pallet change. IKZ spindle with 12000 rpm, 40 bar Operating mode 4 for working with open door. Laodjx Hbmfepfx Al Nsc Blum laser, with tool measurement and tool breakage control. Preparation for Blum 3D probe. Probe is not included in the scope of delivery. 900 liter cooling water tank with belt filter