Used Maho Mh 600 for sale (431)

Condition: good (used), CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, relay boards -Manufacturer: MAHO, relay board from CNC milling machine MH 800C -Type: 28A1 -IDENT NO.: 27.71 231 Kledpfx Aoq T T I Ijgnst -Dimensions: 400/280/H75 mm -Weight: 1.6 kg

Condition: used, Control panel, touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, Simatic Multi Panel, Touch Multi Panel, Touch Panel -Manufacturer: NFI Electronics, touch panel from CNC milling machine MAHO MH 800C Kjdeq T T Nwepfx Agnjlt -Type: 1435-18-22 -Total dimensions: 340/310/H30 mm -Weight: 0.8 kg

Condition: used, Control cabinet - cooling device, control cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling device, control cabinet cooler -Manufacturer: Siemens, heat exchanger control cabinet cooling device from milling machine MAHO MH 800C -Type: 8ME 7874-DR Kedoq T T Nzepfx Agnelt -Voltage: 230V -Power consumption: 170W -Dimensions: 415/130/H725 mm -Weight: 14.2 kg

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Manufacturer: Indramat, AC servo controller from CNC milling machine MAHO MH 800C -Type: KDS 1.1-50-300-W1 MOD 4/1X108-091 -Quantity: 1x servo controller available -Dimension: 490/110/H390 mm Ksdpfjq T T Npjx Agnjlt -Weight: 15 kg

Condition: used, Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: MAHO, Tool changer from CNC machining center MAHO MH 800C Ksdpfx Ajq Tvp Uegnjlt -for: max. 24 shots -Recording: SK -Dimensions: 1200/410/H480 mm -Town weight: 106 kg

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Manufacturer: Indramat, AC servo controller from CNC milling machine MAHO MH 800C -Type: TDM 3.2-20-300-WO MOD 14/1X023-094 -Quantity: 2x servo controllers available -Dimension: 320/70/H390 mm Klodpjq T T I Dsfx Agnst -Weight: 7.7 kg

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, relay boards -Manufacturer: MAHO, relay board from CNC milling machine MH 800C -Type: 28A2 -IDENT NO.: 27.71 232 -Dimensions: 400/280/H75 mm Kledpfx Aoq T T Ndsgnot -Weight: 1.5 kg

Condition: used, Pressure reducer, pressure regulator, bladder accumulator, high pressure bladder accumulator, hydraulic accumulator, pressure accumulator, membrane accumulator -Manufacturer: Hydac, pressure accumulator from CNC machining center MAHO MH 800C -Type: SBO140-1.4E1/112U-140FT080 -Operating pressure: max. 140 bar -Quantity: 2x pressure storage available Kodpfsq T T Ntsx Agnelt -Price per piece -Dimensions: Ø 145 x 205 mm -Weight: 3.7 kg

Year of construction: 1988, condition: good (used), For sale is a milling machine of the company Maho and the type 500 W The machine is in good condition and fully functional Year of manufacture: 1988 Heidenhain TNC 232 travels X- 500 mm, Y- 380 mm, Z-350 mm spindle mounting ISO 40 quill stroke vertical 50 mm spindle speed 20-4000 rpm, infinitely variable feed range 1-3000 mm/min rapid traverse 5 m/min table load 250 kg total power requirement 11,3 kW Kjdpfxsittrlj Agnolt Machine weight approx. 2 t All prices plus VAT machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: repair required (used), Year of construction: 1987, For sale is a small milling center of the brand Maho and type 300 C The power supply unit is defective but can be repaired Technical data: YEAR OF MANUFACTURE 1987 Type: MH 300 C CNC control Phillips 432 Table: 550x275 mm Kledpfx Aoir U H Ejgnet Travel x/y/z : 300/350/220 mm SK 40 holder Spindle speed: 20-4000 rpm Main drive: 3.3 kw Rapid traverse: 3 m/min Quill stroke: 50 mm Dimensions: 2000 x 2000 x 2000 mm Weight: approx. 1900 kg Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: ready for operation (used), Maho turntable for MH 800 C without motor and encoder - Height: 59cm / Width: 61cm / Length: 90cm, used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Kodpjtvct Hefx Agnelt

Condition: used, Year of construction: 1975, Technical details: x-travel: 300 mm y-travel: 350 mm z-travel: 350 mm quill stroke vertical: 60 revolution per minute: 40 - 2000 U/min feed:: 12,5 - 500 / 18 step mm/min. tool taper: SK 40 headstock adjustment: schwenkbar 90° rechts/links mm headstock adjustment: Y-Weg: 175 mm table surface area: 600 x 285 mm distance spindle nose and table: min./max.: 50 / 400 mm distance spindle center to column: min./max.: 170 7 345 mm total power requirement: 1,6 kW weight of the machine ca.: 0,8 t dimension machine xH: 1,4 x 1,1 x 1,7 m Kledpfx Asu T Navognst Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Speed 40 - 2000 rpm with 18 transmission steps Equipment: 3-way display Heidenhain Coolant system *

Condition: used, Year of construction: 1975, Technical details: x-travel: 300 mm y-travel: 175 mm z-travel: 350 mm quill stroke vertical: 60 mm revolution per minute: vert.+ horiz.: 40 - 2000 / 18 step U/min feeds:: 12,5 - 500 / 18 step mm/min. Klsdpfx Ajvc Avuognot tool taper: SK 40 distance spindle nose and table: min./max.: 50 /400 mm distance spindle center to column: min./ax.: 170 / 345 mm table surface area: 670 x 285 mm total power requirement: 1,5 kW weight of the machine ca.: 0,8 t dimension machine xH: 1,4 x 1,05 x 1,6 m Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Speed 40 - 2000 rpm with 18 transmission steps Equipment: 3-way display Heidenhain Coolant system *

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m Klsdpfx Aeu Idbyegnst space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination *

Condition: used, x-travel 400 mm y-travel 400 mm z-travel 300 mm rapid traverse 1,2 m/min feed range 5 - 500 mm/min creep feed 1:100 tool taper ISO 40 stroke v60 h70 mm Ksdpfx Agoxv D Uzenslt table - universal ca. 620 x 320 mm table vertical adjustable 350 mm weight of the machine ca. 1200 kg Machine was used in a public facility and is in good condition. Machine can be viewed under power by prior appointment

Condition: ready for operation (used), Maho milling table for Maho milling machine MH 700 S, milling table for interchangeable pallets 500x630 mm, used, normal signs of wear, 100% functional, scope of delivery as shown in photos. ATTENTION: Please enquire separately for costs of packing and shipping! Kedpfxex Dw Iws Agnolt

Condition: ready for operation (used), Maho milling head (Maho milling machine MH 700 S), used, normal signs of wear, 100% fully functional, scope of delivery as per photos. NOTE: Please enquire separately for costs of packing and shipping! Kjdpfx Asx Dw Iqsgnjlt

Condition: used, Year of construction: 1990, x-travel 0500 mm y-travel 400 mm z-travel 400 mm table-size 680 x 380 mm CNC control 432 PHILIPS feed range 1-3000 mm/min rapid traverse 6 m/min Tool bore ISO 40 turning speed range 20 - 3150 U/min main drive DC 5 kW milling head -swivable +/- 90 ° Kedpfx Asu Rt Nregnelt total power requirement 12 kW weight of the machine ca. 1,2 to dimensions of the machine ca. 2,5 x 2 x 2 m CNC milling machine with 432 Control.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, controller model: PHILIPS CNC 532, Equipment: chip conveyor, TECHNICAL DETAILS X-axis travel: 660 mm Y-axis travel: 500 mm Z-axis travel: 600 mm Table clamping surface: 630 x 500 mm Kodpfoya Hcqex Agnelt Spindle taper: SK 40 Spindle speeds: 20 - 6,300 rpm Feed rate: 30 m/min MACHINE DETAILS Control: PHILIPS CNC 532 Internal coolant supply: 40 bar Total power requirement: 50 kW Dimensions & weight Machine dimensions: 4.98 x 2.78 x 2.93 m Machine weight: approx. 13.3 t EQUIPMENT Chip conveyor Coolant system Rotary pallet changer Hydraulic swivel head (horizontal/vertical)

Condition: used, Year of construction: 1991, x-travel 1000 mm y-travel 500 mm z-travel 700 mm table surface area 1250 x 700 mm spindle taper ISO 50 Kljdpstv Ii Isfx Agnot spindle turning speed range 20 - 3200 U/min quill stroke 100 mm semi-automatic operated Phillips 432 Number of working hours 62.340 h main drive motor 22 kW total power requirement 27 KVA weight of the machine ca. 7,7 t base area 3,8 x 4,1 x 2,4 mm accessories: hydr. Schraubstock X axis, longitudinal 1,000 mm Y axis, vertical 500 mm Z axis, cross 700 mm Min./max. distance from vertical spindle to table top 138 / 600 mm Overhang max. approx. 800 mm Spindle taper SK 50 with inner cooling Spindle speeds (infinitely variable in 2 steps) 20 - 3,200 rpm Feed motion YXZ 1 - 3,000 mm/min Rapid traverse XZ 6,000 mm/min, Y = 5,000 mm/min. Rotary axis as 4th axis with housing of the working area

Condition: used, Year of construction: 1986, x-travel 400 mm y-travel 375 mm z-travel 250 mm table-size 600 x 300 mm quill stroke 50 mm Kedpjxc Nwnsfx Agnelt spindle taper ISO 40 spindle turning speed range 50-400 , 400 - 3150 U/min CNC-control TNC 135 voltage 380 V / 50 Hz feeds X+Z = 5 -1000 mm/min rapid traverse X+Z = 2,4 m/min feeds Y = 5 -670 mm/min rapid traverse feeds Y = 1,6 m/min measuring system resolution capability 0,005 mm total power requirement 3,7 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 1,8 x 1,70 m • HEIDENHAIN TNC 135 control,

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Kjdpfx Asx S Rcmsgnslt

Year of construction: 1986, condition: ready for operation (used), Travel X/Y/Z: 700mm/500mm/450mm, table dimensions X/Y: 900mm/500mm, max. table load: 500kg, spindle mount: SK40, speed: 3150rpm, quill stroke: 100mm, feed: 3m/min, rapid traverse: 6m/min, machine dimensions X/Y/Z: approx. 3550mm/3150mm/2100mm, weight: approx. 3600kg. On-site inspection is possible. Kedpfxewkihxe Agnslt

Condition: ready for operation (used), Year of construction: 1989, Travel X/Y/Z: 700mm/500mm/600mm, speed: 6300rpm, power: approx. 10kW, feed X/Y/Z: 4m/min, rapid traverse X/Y/Z: 10m/8m/10m/min, machine dimensions X/Y/Z: approx. 4500mm/2300mm/2500mm, weight: approx. 6000kg, operating hours: 65425h. On-site inspection is possible. Kjdpewmqxkjfx Agnolt

Condition: ready for operation (used), Tool Milling Machine MAHO MH 800 incl. Tool Holders - Travel X / Y / Z 700x350x450 mm - Table clamping surface 940x510 mm - Spindle mount ISO 40 Kljdpjyi Annefx Agnjt - Vertical - horizontal milling device - Spindle speeds 32 - 1600 rpm (gear-driven) - Automatic longitudinal / cross feeds - Automatic feed / vertical milling head - Coolant system - Tool holders - Documentation - Further technical data see data sheets Dimensions: L x W x H 1.9x1.7x1.9 meters / Weight 3500 kg Errors and omissions excepted.