Used Screw Press for sale (16,272)

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Fpsdpozt H Uxefx Anlsk Format: 400×300 mm Pressure: 3 tons Made in Germany.

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw Fpjdeztmx Depfx Anlok

Condition: used, Year of construction: 2015, operating hours: 6,123 h, total width: 1,500 mm, total height: 1,700 mm, total length: 2,000 mm, briquette diameter: 50 mm, space requirement width: 1,500 mm, space requirement length: 2,000 mm, space requirement height: 1,700 mm, power: 5.5 kW (7.48 HP), filling opening length: 1,040 mm, filling opening width: 1,040 mm, No. 04545 Briquetting press with screw conveyor WEIMA C 150 Used, year of construction 12/2015, 6123 operating hours, very good condition Hydraulic briquetting press for compacting dry wood shavings, sawdust, paper, cardboard and comparable materials Throughput capacity (depending on material) approx. 30 - 50 kg/h Briquette diameter 50 mm Motor power 5.5 kW Hydraulic pressing mechanism Max. clamping jaw stroke 10 mm Storage hopper with discharge arm / agitator Level sensor for automatic operation Manual and automatic operation Siemens SIMATIC PLC control Briquette length monitoring for the production of uniform briquettes Storage hopper approx. 1040 x 1040 mm LW Separate hydraulic unit with oil tank CE-compliant Incl. screw conveyor type RFS. NW 250 x 5200 Motor power 1.5 kW Conveying capacity approx. 4.0 m3/h Filling opening approx. 900 x 300 mm LW Incl. geared motor, feeding section and protective covers Incl. complete technical documentation Transport dimensions briquetting press approx. 2000 x 1500 x 1700 mm LWH, weight approx. 1000 kg Transport dimensions screw conveyor approx. 6500 x 500 x 500 mm LWH, weight approx. 800 kg Fedozpxhijpfx Anlopk To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: good (used), Year of construction: 1974, Hand screw press, arbor press, screw press, hand screw press, compression press, balance compression press -Manufacturer: Kalisz, manual screw press type YB-1 with solid base -Pressure: max. 10,000 kg -Stroke: 200mm -Intermediate size: 320 mm -Spindle holder: Ø 20 mm -Table size: 290 x 250 mm, slot width 14 mm -Dimensions: 1160/860/H1750 mm -Total weight: 350 kg Fsdpfx Aoigwdwonlepk

Condition: used, Year of construction: 1970, pressure 1 t Fpedpfev Td Erox Anlsk Stroke 315 mm

Condition: excellent (used), very robust spindle press Fjdpozmytusfx Anlspk Pressing area: 40 x 50 cm Working height: approx. 50 cm Made of cast iron 80 kg

Condition: excellent (used), Very nice, robust spindle press. Pressing area: 40 x 50 cm. Fpjdezmyr Rjpfx Anljk Working height: approx. 50 cm. Weight: 60 kg.

Year of construction: 2021, condition: used, Technical details: pressure: 5 t distance between columns: - mm dayligth: 60 mm rated capacity: 8 kVA Fpsdpfx Anoyzzh Eolek table height adjustment: 60 mm compressed air: 6 bar connection voltage: 400 V electrics - voltage/frequency: 400/50 V/Hz total power requirement: 4 kW machine weight ab.: 610 kg SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! MACHINE DESCRIPTION (2 machines available) MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. A movable press table is mounted on the horizontal arm, which can be manually adjusted along linear guides. In the front position, the table can be manually locked using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. The press head can only be lowered using two-hand operation when the table is in this position. The control panel includes: ·Two-hand control switches ·Emergency stop switch ·Table lowering button ·Force selection switches (1, 2) The pressing force can be adjusted using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. The press head moves along the vertical arm of the press on linear guides. It is driven by a lead screw, powered by an electric motor with gearbox via pulleys and a timing belt. The entire machine is mounted on a table made of aluminum profiles. *

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Farmet FL200 screw press for rapeseed/sunflower/soybean, with final geometry, in a really good condition. Fjdoxa Hy Uspfx Anlepk Motor 22kw, capacity 400kg/h (with prepress 500kg/h), lamels and geometry checked, and in a good shape. Paired with extruder Farmet FE500 (from our offer) it can process soybean at 400kg/h

Condition: new, MECHANICAL SCREW PRESS FOR STACKING U-JOINTS PRK-2 Designed for staking u-joints as well as assembly and dissasembly of driveshafts during repair and remanufacturing process Fpedopbwdlepfx Anlsk Press can be used for the assembly and replacement of cardan joints in the repair and production of cardan shafts, as well as for other processes in which the pressing operation is used. This press is designed for use in a repair shop and does not require any special knowledge for operation and maintenance. Manual feed ensures precision and quality of stacking process. The pressing mechanism is based on a ball screw, which has a high efficiency and a long service life. Technological tooling for replacing stacked u-joints: • Centering housing for the punches. • Set of 8 bits for punching crosses with diameters from 20 to 31 mm for drive shafts. • Set of 4 bits for punching crosses with diameters from 15 to 19 mm for steering shafts. SPECIFICATIONS Working area (L x B x H) 322х312х350 mm Maximum compression force 5500 kg Maximum force on rupture 2000 kg Dimensions (length x width x height) 402х488х1478 mm Weight 160 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Fsdpfsyb Sdisx Anlepk Made in Germany Good working condition

Condition: like new (used), Kaeser M30 PE screw compressor on a trailer The unit is in perfect condition, like new. The unit was purchased from a warehouse and has never been used. Only 50 hours of operation. Fpedpfx Anszlaa Eslok Technical specifications: Operating pressure: 7 bar 18.2 kW motor Automatic start Capacity: 3 m3/min Weight: 595 kg Year of manufacture: 2022/12

Condition: used, Year of construction: 2009, Manufacturer: H&G Fsdpex Hyfyjfx Anlopk Model: HG/SV 11 Weight: 1800 kg Engine power: 11 kW

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Fedpjyy U Shjfx Anljpk Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: excellent (used), Year of construction: 2014, operating hours: 26,000 h, functionality: fully functional, overall weight: 1,603 kg, power: 55 kW (74.78 HP), 2014 Ingersoll Rand R55i Compressor Fpodpfx Ajzrxhhonljk 55kw screw compressor Full service history Approx 26k hours Very good condition

Condition: good (used), Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Atlas Copco, screw block compressor stage from compressor type GA 408 Pack -Screw block: Type GA 408 -Final pressure: max. 8 bar Fsdpeztx Anofx Anlopk -Shaft: Ø 40 x 55 mm -Dimensions: 760/490/H500 mm -Weight: 160 kg

Condition: good (used), Year of construction: 2002, operating hours: 39,000 h, overall weight: 532 kg, total length: 1,285 mm, total width: 920 mm, total height: 1,050 mm, power: 18.5 kW (25.15 HP), volume flow: 156.6 m³/h, pressure (max.): 10 bar, noise level: 68 dB, Equipment: documentation/manual, type plate available, Very well-maintained Ingersoll Rand screw compressor, in excellent technical and visual condition. Fully serviced and ready for immediate use. New hour meter installed. 18.5 kW, 2.61 m³/min, 10 Bar. Fpjdpfx Aeztl Udenlek

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: AII362754, power: 37 kW (50.31 HP), operating pressure: 7 bar, Equipment: compressed air system, compressor, type plate available, The Atlas Copco GA37 oil-lubricated compressor is a powerful and reliable machine designed to deliver optimal performance in various industrial environments. This used model, with a power rating of 37 kW, can operate at a pressure of 7.5 bar, making it ideal for applications requiring constant pressure and energy efficiency. Manufactured by Atlas Copco, a leader in the compressed air solutions industry, the GA37 is known for its durability and robust design. Thanks to its advanced technology, it ensures quiet operation while guaranteeing the production of high-quality compressed air. Perfect for companies looking to improve their productivity while minimizing operating costs, this compressor is a wise choice for various industrial sectors. Overall, the Atlas Copco GA37 compressor combines performance and reliability, while also offering excellent value for money for a used unit. It is a smart choice for those seeking a proven and efficient solution in the field of oil-lubricated compressors. Fpedjzpxnvopfx Anljk

Condition: excellent (used), Year of construction: 2004, Fini Cube 10- This is a compact 10HP industrial screw compressor. It can deliver max pressure of 10 bar with a 7.5KW electric motor. I was purchased in 2004 and was serviced on a yearly basis by the fully trained technicians of the local Fini agents. This compressor was used as a back up compressor to our Fini BSC 20 compressor so it was only used periodically to ensure it functionality when required. Fpodpezluihofx Anlok It come complete with an MTA air dryer.

Condition: good (used), functionality: fully functional, power: 250 kW (339.91 HP), Description: Screw compressor ZR 4-52 with drum dryer Characteristics: Capacity 8.00 bar Power 250 kW Voltage 500 V Air flow rate l/min 634 Fsdpfxjvyrlae Anlspk Running hours at last maintenance: 50307

Condition: good (used), functionality: fully functional, Description: Screw compressor with drum dryer ZR 250 1997 Characteristics: Capacity 7.50 bar Power 245 kW Fedpfxsvyrtds Anlspk Voltage 500 V

Condition: good (used), functionality: fully functional, Description: Screw compressor ZR 250 1998 Characteristics: Fpedpfxsvyrq Ae Anljk Capacity 7.50 bar Power 245 kW Voltage 500 V

Condition: good (used), Year of construction: 2001, functionality: fully functional, power: 305 kW (414.68 HP), Description: Screw compressor with drum dryer ZR315VSD Characteristics: Capacity 8.60 bar Power 305 kW Fpjdpfovyq Tpex Anlok Voltage 500 V Running hours at last maintenance: 46383

Condition: good (used), Year of construction: 2019, functionality: fully functional, power: 382 kW (519.37 HP), Description: Fpedpevyq Rnofx Anlok Screw compressor ZR315VSD Characteristics: Capacity 8.60 bar Power 382 kW Voltage 400 V or 500 V Running hours at last maintenance: 7270

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, This FINI BSC 20 is a high performance screw compressor that delivers up to 10bar of max pressure with a 15KW electric motor. Fpsdpfx Aezlufpjnlek This compressor was purchased new and was serviced on a yearly basis by the locally trained Fini agents. It comes complete with an MTA air dryer unit.