Used Martin Km 200 for sale (92)

Condition: good (used), Year of construction: 1988, Lathe KMK 40 Speed 1800 rpm Turning length 1000 mm with 3 jaws 4 jaws Multix with 4 inserts Rotating center point Face plate Collet chuck with collet set Chjdpfxeu Uh U Io Al Aoc

Condition: used, Year of construction: 2015, Base machine T65C Automatic, 1 unit General technical features: • Weight: 1600-2,200 kg, Martin composite stand • Table size: 860 mm x 1370 mm in gray cast iron; table extension is standard, designed as a lockable tool tray, 335 mm x 625 mm • Table height: 900 mm • Scoring table: Standard length 3000 mm, table length corresponds to cutting length; position-independent locking; guides are hardened, wear-resistant, self-cleaning; table lip is replaceable; design in anodized aluminum • Saw blade spindle: Ø 30 mm for main saw blade, two drive pins 8 mm • Saw blade change: Quick-change system "ProLock" • Saw blade diameter: Ø 250 - 550 mm; can be recessed under the table up to 400 mm; saw blades up to Ø 400 mm can be used with inserted scoring saw blades • Cutting width: 1,100 mm • Saw blade swivel: 0° to +46° • Cutting height: max. 204 mm / saw blade 550 mm / 0°, max. 135 mm / saw blade 550 mm / +45° • Cutting width (main saw): Saw blades with max. 6 mm cutting width at swivel angle 0° to +46°; special tools with max. 20 mm cutting width at swivel angle 0° • Motor power: 5.5 kW (7.5 hp), 3 ~ / 400 V - 50 Hz • Speeds: 2800 / 4000 / 5000 rpm; easy and convenient speed change from the front via the chip guard • Length stop: Design in anodized aluminum with continuous support, fine adjustment for both fence elements; dimension display via a scale with a magnifying glass; length compensation for angled cuts with electronic assistance; cutting length 95 - 2000 mm, extendable up to 3220 mm • Cross table: Design in zinc-coated steel; angled cuts according to the scale without repositioning the stop; integrated fixing positions for 0°, 22.5°, 30° and 45° cuts, one-hand clamping on the scoring table; support dimensions 1340 x 650 mm • Parallel stop: Electromotive positioning of the parallel stop; stop bar in anodized aluminum, foldable; complete integration of the parallel stop into the control system; guided by four grooved ball bearings, floating above the machine table, removable in any position; movement of the stop in the safety area (0 - 200 mm) in hold mode, display resolution: 0.1 mm; repeat accuracy ± 0.05 mm • Extraction: Connection to protective hood Ø 100 mm, machine stand Ø 120 mm; minimum extraction air volume: 23 m³/min at 800 Pa at the main connection 120 mm • Protective hood: Protective hood with 2 blade sets (1x flat for 0° cuts, 1x with a one-sided belly for cuts 0° to 46°); passage dimension between saw blade axis and support column: approx. 900 mm, clearance when the hood is swiveled away between the saw blade and the protective hood arm: approx. 635 mm; releasing the locking from the working position • Standard accessories: 1 scoring shoe on the scoring table, 1 handle for pushing the wood, 1 ProLock combination wrench, 1 return handle, 4 shims (250/350, 350/450, 450/500, 500/550), 1 push stick • Control panel: Control panel at eye level, can be swiveled away • Electrical equipment (according to VDE/EN 60204): Electronic soft start/stop device for the main saw blade; contact for controlling the extraction; motor protection switch and winding protection, emergency stop button; required voltage supply: 3 ~ / 400 V - 50 Hz • Emission values, workplace emission: Noise values according to DIN EN ISO 11202, dust values according to DIN 33893. Please refer to the operating manual for the technical values. Chedpfxsz Alfuo Al Ajc Performance features of the T65 control system: Performance features of the 5.7" (145 mm) touch screen control system with color L

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 400 mm turning diameter over support: 220 mm turning length: 1100 mm centre height: 180 mm spindle passage: Ø 45 mm range of revolution per miute: 31,5 - 1.400 / 12 step U/min range of feed in x - axis: längs: 0,08 - 1,10 m/min range of feed in y - axis: quer: 0,028 - 0,40 m/min tailstock quill taper MT: MK4 tailstock quill adjustment: 200 mm total power requirement: 4,0 kW weight of the machine ca.: 1,7 t dimension machine xH: 2,5 x 1,1 x 1,4 m Equipment: -Three-jaw chuck Ø 250mm manufacturer Forkardt with interchangeable jaws -Multifix steel holder -Cooling water device with pump -chuck guard -chip collecting tray -chip guard Accessories: -chuck spanner Chedju Ix E Hspfx Al Asc -tool holder -2 pieces gears *

Condition: good (used), Table milling machine Martin T 25. Chedoy Srtmspfx Al Ajc

Condition: like new (used), Year of construction: 2019, operating hours: 137 h, T45 planer by Martin with Tersa cutterhead Chodpfxsz Icvlj Al Aec Planing width approx. 630mm Planing height electrically adjustable from 2.8 to 300mm, displayed on a digital indicator with 1/10mm accuracy and positioning control The control system also offers the option of incremental adjustment, i.e., for example, you can set a value of 1mm and then, by repeatedly pressing the start button, change the planing height by 1mm each time without having to set a new absolute height each time. Furthermore, 99 fixed values can be stored as a program. Drive motor 5.5kW with automatic motor brake 4-knife Tersa cutterhead with new knives Feed speed 6 + 12m/min Rubber-coated infeed roller Rubber-coated outfeed roller Planed machine table guided on four leadscrews and guides for optimal stability Low-noise design with soundproof hood Dust extraction port 160mm Emergency stop at the front and rear New Tersa knives Operating manual CE marking Original paint, not repainted Carpet in original condition No scratches on the table! Only 137 operating hours, which is only 25 minutes per week!!! Dimensions approx. 1200 x 1300 x 1250mm (LxWxH). Weight approx. 1200kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".

Condition: used, Year of construction: 1985, functionality: fully functional, Slide carriage length: 3320 mm Motor power: 5.5 kW Csdjz Iv Hqspfx Al Aehc Cutting height: approx. 145 mm Height and swivel adjustment via foot-operated hydraulic system

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 506925, functionality: fully functional, operating hours: 261 h, power: 5.5 kW (7.48 HP), planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, overall weight: 1,260 kg, Offering a used MARTIN thickness planer, model T45. Sale due to restructuring of the company. General Technical Specifications: Planing width: 630 mm Maximum planing depth: 12 mm Planing height: 2.8 - 300 mm Minimum workpiece length: 270 mm Weight: approx. 1,200 kg Table length: 1260 mm Speed: 5000 rpm Thickness table extension 630 x 450 mm, foldable Year of manufacture: 2011 5.5 kW (7.5 hp); maximum planing width 630 mm The machine provides first-class results in planing operations. Operation: 1-axis control for planing dimensions, maximum 99 values can be stored, Button for manual quick and fine adjustment of the planing thickness according to the digital display, Push buttons for starting and stopping the cutterhead, Cutterhead: TERSA full-steel cutterhead Z4 D=125 mm; including locking mechanism for easy cutter replacement Groove for accommodating planing cutters. Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles, preventing tipping, table surface finely planed. Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers D=85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. Extraction: High-swiveling, split hood with chip extraction connection D=160 mm, Chsdpfx Ajzwpvasl Aec Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease nipples. The machine is still connected and can be tested. Price is quoted plus VAT.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 471292, functionality: fully functional, operating hours: 438 h, power: 7.5 kW (10.20 HP), spindle diameter: 40 mm, rotational speed (max.): 9,000 rpm, total length: 3,000 mm, total width: 1,500 mm, total height: 1,820 mm, overall weight: 1,150 kg, Equipment: documentation/manual, Offering a used Martin T26 Duo Control swivel spindle milling machine for sale. Sale due to company restructuring. GS tested, BG test certificate, CE compliant. Technical data: Spindle swivel: -45 to +45° Height adjustment: electric with rapid and slow feed Depth adjustment: electric Table opening: electrically adjustable from 70 - 220mm Swivel adjustment: electric Feed rate (height): electric Stop adjustment: manual Height display: digital Swivel angle display: digital Milling stop display: digital Spindle diameter: 40mm with steep taper SK 40, collet quick-change system incl. torque wrench Electropneumatic locking via selector switch. Spindle speeds: 3000, 4500, 6000, 9000 rpm Power consumption: 7.5 / 9.5 kW Cedpfszwp Uiox Al Ashc Motor brake: wear-free, electrically braked Dust extraction connection: 2 x 120mm Machine length: 3000mm Machine width: 1400mm Weight: 1150kg Year of manufacture: 2007 Includes: Variomatic 4N feed system, continuously adjustable from 2-20 m/min, Protective device type Centrex Swivel device for milling stop Martin table extension on both sides with extendable workpiece support, approx. 3000mm long. Martin support for feed system, swivelable, with motorized height adjustment. Aigner Integral stop 650/500mm incl. filler bar. The machine is still connected and can be tested. Price plus VAT.

Condition: used, Year of construction: 1989, Circular saw Manufacturer: Martin Type: T 72 Year of manufacture: 1989 Technical data Saw blade min. 200 mm Saw blade max. 450 mm Rotational speed 2800/4000/5500 RPM Voltage 380 V 50 Hz Rated current 18.0 A Chedpfozuyx Tsx Al Aec Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2026, New exhibition machine! General technical features: - Control system: 7.0" touchscreen ConnectTouch - Cutting height and cutting angle are electronically controlled, with digital input of cutting height and angle (controlled positioning of the motorized axes) as well as movement of the motorized axes in hold mode (movement of the axes via push button); Display resolution: 0.1 mm or 0.01°; Repeat accuracy ± 0.05 mm or ± 0.005° - Weight: approx. 1,600 - 2,200 kg - Table size: 860 mm x 1,270 mm in gray cast iron; Table extension as standard across the full table width - Table height: 900 mm - Stand: The machine stand is a stable, thick-walled composite construction, implemented in this form and perfection exclusively by MARTIN. The intelligent combination of the two materials, steel and concrete, creates a high-quality stand that is unsurpassed in terms of stability, damping capacity and torsional stiffness. - Tools: Diameter 250 - 450 mm, optionally up to 550 mm; Main saw blade ø 30 mm with auxiliary holes, Scoring saw blade ø 36 mm; Tool cutting width max. 20.0 mm for machines with single-sided tilt, 6 mm for machines with double-sided tilt; Saw blades up to 350 mm can be recessed under the table. Special tool diameter max. 400 mm, weight max. 12.0 kg - Tool change: Quick-change system ProLock - Tool swivel: 0° to +47°, optionally -46° to +46°; Swivel is only possible with saw blades up to 6 mm cutting width - Cutting height: 0°: max. 155 mm / Saw blade ø 450 mm; optionally: max. 205 mm / Saw blade ø 550 mm T7710/1: +45°: 106 mm / ø 450 mm; optionally 141 mm / ø 550 mm T7710/2: +45°: 104 mm / ø 450 mm; optionally 144 mm / ø 550 mm -45°: 88 mm / ø 450 mm; optionally 123 mm / ø 550 mm - Motor: State-of-the-art synchronous motor SynchroDrive with large power reserves in energy efficiency class IE4 - Motor power: 5.5 kW, optionally up to 11 kW; due to its design, the motor can be overloaded several times its rated power for a short time and therefore offers large power reserves - Speed: Continuously variable 1,000 - 5,000 rpm - Control panel: The control panel is at eye level and is pivotably mounted around its vertical axis. In addition, it can be swivelled to the right, so that even larger components can be easily processed - Rip fence: Standard length 3,000 mm, table length corresponds to cutting length; position-independent locking; guides hardened, wear-resistant, self-cleaning; table edge replaceable; made of anodized aluminum - Length stop: Made of anodized aluminum with continuous support, fine adjustment for both flap stops; Measurement display via scale with magnifying glass; Cutting length 95 - 2000 mm, extendable up to 3220 mm - Crosscut table: Made of steel with powder coating, workpiece support in anodized aluminum, two sliding struts to extend the support surface; Length stop can be placed in the front and rear position without lifting; One-hand clamping on the support surface 1340 x 650 mm - Surfaces: Stand: Stand with high-quality powder coating; Cast iron: Table surface finely milled; Aluminum: Aluminum components anodized - Protective cover / Extraction: Height-adjustable protective cover including interchangeable rear part for angular cuts; Protective cover for saw blades up to ø 450 mm (optional 550 mm); Extraction connection on the cover: Ø 80 mm, on the machine stand Ø 120 mm; Total extraction connection Ø 140 mm; Minimum air volume: Vmin 18.5 m3/min at 20 m/s, underpressure 1,400 Pa - Electrical equipment: Connection Csdpfsz A Hh Usx Al Aohc

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 155 mm, cutting width (max.): 1,350 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 5,000 rpm, rotational speed (min.): 1,000 rpm, total length: 3,300 mm, total width: 1,985 mm, total height: 1,510 mm, overall weight: 1,100 kg, table height: 900 mm, Equipment: documentation/manual, rotational speed infinitely variable, saw blade guard, • Smooth-running saw blade • Cutting width 1350 mm • Precisely operating crosscut table, length 3.3 m • Easy-to-use parallel guide Chsdpozvdwpefx Al Aoc • 7'' touchscreen control panel • Modern SynchroDrive drive technology • Handwheel for positioning the parallel guide • Guide plate holder • Electronic preparation for retrofitting a scoring unit • Standard cross table for length stop for miter cuts up to approximately ± 47° • Table extension at the rear 700 x 855 mm – standard • Weight approximately 1,100 – 1,400 kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, total length of planing tables: 1,260 mm, total width: 1,280 mm, total height: 1,220 mm, overall weight: 1,200 kg, Equipment: CE marking, documentation/manual, • Operation: 1-axis control for planing dimensions, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence. • Buttons for manual quick and fine adjustment of the planing thickness according to the digital display. • Push buttons for starting and stopping the cutterhead. • Integrated operating hour counter. • TERSA all-steel cutterhead with 4 knives. • 2nd rubber feed roller, 85 mm, complete. • Thickness table extension, foldable, 630 x 450 mm. • Thickness table: Electric thickness table adjustment with fine adjustment, feed speed 10 mm/s, mounted on 4 support spindles to ensure stability, table surface finely planed. • Feed: 2 speeds 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. Chjdpfjzvfm Eex Al Aec • Extraction: High-pivoting, divided hood with chip extraction connection Ø 160 mm, can be connected on the left or right (on both sides in special cases), minimum extraction air volume: 27 m³/min. at 20 m/s. • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutterhead via grease nipples. • Weight: approx. 1,200 – 1,400 kg • Workpiece length min. 270 mm.

Condition: used, Year of construction: 2000, Spindle swivels: Yes, -45 to +45° Height adjustment: electric Swivel adjustment: electric Stop adjustment: manual Height display: digital Swivel angle display: digital Milling stop display: digital Spindle diameter: 30 mm, 40 mm Speeds: 3000, 4500, 6000, 9000 Power consumption: 5 / 6 kW Chodpezdzbzefx Al Aec Motor brake: Yes, automatic Dust extraction port: 2 x 120 mm Machine length: 2500 mm Machine width: 1400 mm Weight: 1100 kg

Condition: used, Year of construction: 2006, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, cutting width (max.): 1,100 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, rotational speed (max.): 5,500 rpm, rotational speed (min.): 2,800 rpm, total length: 3,900 mm, total width: 2,000 mm, total height: 1,700 mm, overall weight: 1,800 kg, Equipment: documentation/manual, saw blade guard, No. 04543 Sliding table saw Martin T 73 CLASSIC Used, year of construction 2006 Sliding table length 3700 mm Cutting width at rip fence 1100 mm Lowerable rip fence Rip fence adjustable by handwheel, with pneumatic assistance and digital display Saw blade diameter 250 - 500 mm Saw blade bore 30 mm Motor power 5.5 kW Electric saw blade tilt 0° - 46°, with digital display Electric cutting height adjustment, with digital display Speeds 2800 / 4000 / 5500 rpm, with digital display Electropneumatic locking of the saw spindle Central oil lubrication with pump Crosscut fence with 2 flip stops and digital dimension display Crosscut table with infinitely variable locking Table extension with tool tray Codpsz E Ntljfx Al Aohc Electric motor brake Parallelogram safety guard for the saw blade Pneumatic connection 6 bar Connection 400 V / 50 Hz Complete technical documentation available TÜV/GS tested and CE marked Transport dimensions approx. 3900 x 2000 x 1700 mm LWH Weight approx. 1800 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: ready for operation (used), Year of construction: 1984, machine/vehicle number: V133324, functionality: fully functional, input voltage: 380 V, planing width: 630 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, overall weight: 900 kg, Thickness planer, manufacturer Martin Csdoz Aruvjpfx Al Aehc Type T 42 Factory number V133324 Year of manufacture 1984 4 knives Planing width 630 mm

Condition: excellent (used), Year of construction: 2000, Robust oscillating milling machine T 26, swiveling from -45 to +45 degrees. Reversible drive motor 5 / 6kW with automatic motor brake. R/L rotation. Swiveling angle from -45 to +45 degrees, electrically adjustable. Height adjustment max. 150mm, electrically adjustable. When the height is adjusted, the correction factor for the swiveling angle is displayed in the upper display, which is then set on the stop, allowing settings to be realized according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm. Spindle diameter 30mm, quick-change spindle with torque wrench. Comfort stop T226 with digital displays for total adjustment and infeed stop individually, as well as input of the cutter diameter; the cutting depth is automatically calculated. Chsdpfxezbm Tfo Al Aoc Stop with lifting device, can be swivelled away (for curved milling). Table extension on the right and left with extendable workpiece support. Support can be extended by 700mm. Table length approx. 2400mm. Foldable stop for mortise milling. Workpiece clamping device Aigner Centrex. Original Martin cast iron table left 500mm, right 500mm with two insert guide rails. 3-roller feed HolzHer ET117, with 8 speeds, R/L rotation, new rollers. Feed socket, switchable from the control panel. Comfort stand with electrically height-adjustable feed support, which can be swivelled away for machine setup and then easily locked into place. Dust extraction nozzle 2 x 120mm. Compressed air connection 6 bar. Emergency stop switch. Some parts of the machine have been newly painted (special color RAL1015). V-belts renewed. Operating manual. CE marking. Dimensions approx. 3000 x 1500 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 66091, input voltage: 380 V, power: 0.37 kW (0.50 HP), type of input current: three-phase, The Martin Mechanic MAS 493/77 is an industrial quilting machine (a special stitching machine) used in the textile industry for quilting and tufting pillows or mattresses. Chjdpfxozzdulo Al Asc Key technical features of the machine: Application: Specifically designed for heavy-duty materials such as garden cushions, standard pillows, and mattresses. Maximum thickness: Can quilt materials up to 130 mm thick. Quilting function: The machine automatically stitches decorative or reinforcing rings with a diameter ranging from 8 to 18 mm. If you are interested, please include your contact information in your inquiry.

Condition: used, Year of construction: 1995, Working width: 630 mm Planing height: 250 mm Planing shaft: Tersa Number of knives: 4 Height adjustment: electric Thickness display: digital display Feed rate: 6 / 12 m/min Infeed roller: rubber Outfeed roller: rubber Table rollers: yes Codpfx Ajz A D Ufjl Aohc Motor power: 7.5 kW Dust extraction connection: 160 mm Machine length: 1200 mm Machine width: 1200 mm Weight: 1000 kg

Condition: used, Year of construction: 2001, Working width: 630 mm Planing height: 250 mm Planer cutterhead: Tersa Number of knives: 4 Chjdpezq Dcnjfx Al Asc Height adjustment: electric Thickness display: digital display Feed rate: 6 / 12 m/min Infeed roller: rubber Outfeed roller: rubber Table rollers: no Motor power: 5.5 kW Dust extraction connection: 160 mm Machine length: 1200 mm Machine width: 1200 mm Weight: 1000 kg

Condition: used, Martin t60 panel saw carriage: 330 cm, tilt: 0-45 degrees, and motorized adjustment of the blade height, Chsdpfjzzdi Nex Al Aec sliding table on the right side, manually adjustable up to 1250 mm with an electronic display, 3-axis scoring saw, electrically adjustable, scoring saw that extends and retracts pneumatically, main motor: 5.5 kW, 3 cutting speeds, max. blade diameter: 400 mm.

Condition: used, This listing is for a Hulme Martin 10/3319 Heat Sealer Cedpfx Asxuiv Iol Ajhc The unit is in full working condition and is ready for immediate release. This is an mpulse heat sealers (for like-for-like thermoplastic film welding), constant heat sealers (for laminated or foil materials), vacuum sealers and other ancillary equipment. Designed for durability (20+ years or more in service according to their marketing) and easy servicing via plug-in heater bars and affordable consumables.

Condition: used, functionality: fully functional, Martin Surfacing Jointer 250 x 51 cm, 4.8 kW Motor 2 cutterhead shafts, wedge-shaped guide rails Re-sharpenable jointer knives Adjustable surfacing fence, swivels 90 - 45 degrees With Aigner miter gauge Chip removal 0 - 15 mm Dust extraction port 160 mm Cedpfxjztz Hpj Al Ajhc Motor brake with switch optional Weight 900 kg

Condition: used, Year of construction: 2026, New exhibition machine! General technical features: Planing width: max. 630 mm Planing height: 2.8 - 300 mm Maximum planing removal: 12 mm Workpiece length min.: 270 mm Weight: approx. 1,200 - 1,400 kg Table length: 1,260 mm Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; buttons for manual quick and fine adjustment of the planing thickness according to digital display, push buttons for starting and stopping the cutterhead, integrated operating hour counter - Cutterhead: Tersa full steel cutterhead with Z 4 - Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles for tilt stability, table surface finely planed - Feed: 2 speeds 6 / 12 m/min - Extraction: Hinged, split hood with chip extraction connection Ø 160 mm, can be connected on the left / right (in special cases on both sides); minimum extraction air volume: 24 m³/min at 20 m/s, negative pressure 1,050 Pa Planing width: split hood with chip extraction connection - Maintenance device: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease fittings Accessories: 1 grease gun, filled with long-life grease 1 oil can 1 adjustable wrench 1 tool for cutter replacement 1 pair of blank cutters 640 mm 2 pairs of TERSA reversible cutters 640 mm CV - Electrical equipment: Electronic soft start/brake device; contact for controlling the extraction; motor circuit breaker and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (infeed / outfeed); required voltage supply: 3 ~, 400 V - 50Hz - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idling noise (without extraction) P1 65 Working noise (with extraction) P1 77 Idling noise (without extraction) P2 65 Working noise (with extraction) P2 77 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idling noise (without extraction) 84 Working noise (with extraction) 90 - Dust emission DGUV test "tested for wood dust" according to DGUV 209-044 / BGI 739-1 Special equipment: -Drive power 7.5 kW (10 hp) -2nd rubber feed roller, ø 85 mm, complete -Thickness table extension, foldable, 630 x 450 mm -Special speed 6,000 rpm Location: Rieth Chedpoz A Hhuofx Al Aec

Condition: used, Year of construction: 2026, New demonstration machine! General technical specifications: Motor power: 5.5 kW (7.5 hp) Infeed table length: 1200 mm Planing width: 500 mm Table height: 850 mm Cutting depth: max. 8 mm Speed: 5000 rpm Outfeed table length: 1640 mm Weight: approx. 1200 - 1250 kg - Operation: Electric cutting depth adjustment with display; concave/convex joint adjustment with display - Fence: Adjustable up to 45° with scale, single-hand operation, and integrated auxiliary fence - Cutterhead guard: Bridge guard - Extraction: Extraction port Ø 160 mm, minimum extraction air volume: 24 m³/min at 20 m/s, vacuum 810 Pa - Tool: TERSA solid steel cutterhead Z4, Ø 125 mm - Feed: Console for mounting a feed device - Electrical equipment: Electronic soft start/stop brake; contact for controlling the extraction; motor protection switch and winding protection, undervoltage protection; lockable main switch, EMERGENCY STOP button; required voltage supply: 3 ~, 400 V, 50 Hz - Emission values: Emission sound pressure level at the workplace LpA according to EN ISO 11202 [dB(A)] - idle noise 77 / operating noise m, with extraction: 88 - Accessories: 1 pair of TERSA knives - standard 510 mm (installed), 1 grease gun with long-life grease, 1 internal hexagon wrench, 1 adjustable wrench, 1 tool for knife changes Cedpsz Dbp Nefx Al Ajhc Special equipment: - Safety device SUVAMATIC - Spiral cutterhead Xplane with 3 spiral knife rows (26 domed carbide knives per row; 2 counter knives), delivery including full knife set and a T-key Torx T20; cutterhead speed 6,000 rpm included. The emission sound pressure level LpA is reduced by 8 dB(A) during machining. - Control panel combined and moves with the fence. The optional control panel offers maximum ease of use and overview, as the controls move with the smooth-running fence; the ON/OFF button for the cutterhead, the EMERGENCY STOP button, the electric cutting depth adjustment with digital display, and the electronic concave/convex joint display are within easy reach and in the best viewing position. Location: Rieth

Condition: used, Martin t60 panel saw carriage length: 510 cm, tilting angle: 0-45 degrees, with motorized blade height adjustment, Cjdpozlnmgefx Al Aohc rip fence on the right side, manually adjustable up to 1200 mm with an electronic display, 2-axis scoring saw, electrically adjustable, scoring saw extending and retracting pneumatically, main motor: 5.5 kW, 3 cutting speeds, maximum blade diameter: 400 mm.