Used Martin T 54 for sale (100)

Condition: used, Year of construction: 2000, Working width: 500 mm Motor: 5.5 kW with motor brake Lsdpfxe Aay D Ds Ah Sohn Tersa cutterblock, Z=2 Speed: 5,000 rpm max. Maximum chip removal: 8 mm Adjustable planer table with motorized height adjustment Angled fence with integrated auxiliary fence Suvamatic cutter guard Weight: approx. 1000 kg Dimensions: 2850 x 850 x 1110 mm Location: Supplier

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Lhedpfxopq If De Ah Sen Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 54 jointer Lhodpfx Ahjpgkmwo Ssn Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: good (used), Table milling machine Martin T 25. Lhedpfx Ajy Srtmsh Ssn

Condition: excellent (used), Year of construction: 2000, Robust oscillating milling machine T 26, swiveling from -45 to +45 degrees. Reversible drive motor 5 / 6kW with automatic motor brake. Lodpjzbm Tfefx Ah Sshn R/L rotation. Swiveling angle from -45 to +45 degrees, electrically adjustable. Height adjustment max. 150mm, electrically adjustable. When adjusting the height, the correction factor for the swiveling angle is displayed in the upper display, which can then be set on the stop, thus allowing settings to be realized according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm. Spindle diameter 30mm, quick-change spindle with torque wrench. Comfort fence T226 with digital displays for total adjustment and infeed fence individually, as well as input of the cutter diameter, whereby the cutting depth is calculated automatically. Fence with lifting device, can be swung away (for curved milling). Table extension on the right and left with extendable workpiece support. Support can be extended by 700mm. Table length approx. 2400mm. Foldable fence for edge milling. Workpiece clamping device Aigner Centrex. Original Martin cast iron table, left 500mm, right 500mm with two insert guide rails. 3-roller feed system HolzHer ET117, with 8 speeds, R/L rotation, new rollers. Feed plug, switchable from the control panel. Comfort stand with electrically height-adjustable feed support, which can be swung away for machine setup and then easily locked into place. Dust extraction port 2 x 120mm. Compressed air connection 6bar. Emergency stop switch. Some parts of the machine have been newly painted (special color RAL1015). V-belts renewed. Operating manual. CE marking. Dimensions approx. 3000 x 1500 x 1830mm (L x W x H). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration, see "other offers from this supplier".

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Storage location: Nattheim Lsdpfx Aj Adlx Ioh Sehn

Condition: used, Year of construction: 1992, completely shut down used good condition cleaned functionally tested partially overhauled Manufacturer: Martin Type: T 53 Year of manufacture: 1992 Machine no.: V190268 GS-tested for wood dust Control panel at the top Pendulum guard Ledpfsz Np I Eox Ah Sehn Table edges with low noise Safety cutter block Table adjustment with foot-operated hydraulics Digital display for chip thickness Digital display for groove depth Automatic brake Groove depth adjustment Motor kW: 5.5 Planing width approx. mm: 510 Table length approx. feeding length mm: total 2840 Dust extraction connection D mm: 160 Space requirement approx. L x W x H mm: 2900 x 900 x 1100 Weight approx. kg: 1000 Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without guarantee or warranty.

Condition: used, Year of construction: 2023, Circular saw Manufacturer: Martin Type: T65 Year of manufacture: 2023 Operating hours: approx. 58 h Table: 860 x 1,370 mm Sliding table length: 3,300 mm Cutting width: 1,350 mm Power: 5.5 kW Speeds: 2,800 / 4,000 / 5,000 rpm Cutting height: max. 204 mm Saw blade diameter: max. 550 mm Cutting width adjustment: Manual, digital display Height and angle adjustment: Electric Lhodpfx Asz U Hh Teh Son The machine table has some surface rust.

Condition: used, Year of construction: 2000, Motor: 7.5 kW Tersa cutterhead, Z = sliding rollers in the thickness table, height-adjustable, steel feed roller, ribbed, infeed roller before and after the thickness table, safety bar. Cutterhead speed: 5000 rpm. Planing height: 2.8 - 250 mm with digital display. Planing width: 630 mm. Max. chip removal: 8 mm. Dust extraction port: 160 mm. Weight: approx. 1115 kg. Dimensions: 1140 x 1260 x 1200 mm. Lhjdps Aay D Refx Ah Sen Location: Supplier.

Condition: like new (used), Year of construction: 2019, operating hours: 137 h, T45 thicknesser by Martin with Tersa cutterhead Lsdpfez Icvlox Ah Sehn Planing width approx. 630mm Planing height adjustable electrically from 2.8 to 300mm, with digital display providing readings in 1/10mm increments and positioning control The control system also offers the option of incremental adjustment, i.e., you can set a value such as 1mm and then, by repeatedly pressing the start button, change the planing height by 1mm each time without having to set a new absolute height each time. Furthermore, 99 fixed values can also be stored as a program. Drive motor 5.5kW with automatic motor brake 4-knife Tersa cutterhead with new knives Feed rate 6 + 12m/min Rubber-coated infeed roller Rubber-coated outfeed roller Planed machine table guided on four threaded spindles and guides for optimum stability Low-noise design with soundproof hood Dust extraction port 160mm Emergency stop at the front and rear New Tersa knives Operating manual CE marking Original paint, not repainted Carpet in original condition No scratches on the table! Only 137 operating hours, i.e. only 25 minutes per week!!! Dimensions approx. 1200 x 1300 x 1250mm (LxWxH). Weight approx. 1200kg. The machine can be demonstrated on site by appointment. We only offer machines that are readily available in our warehouse for demonstration, see "other offers from this provider".

Condition: used, Year of construction: 2006, Used Machine Year of Manufacture: 2006 Features and Technical Specifications - Motor power: 4 kW/400 V - Saw blade swivels on both sides from -46° to 46°—a total swivel range of 92° for flexible angle cuts against the rip fence and crosscut fence - Maximum cutting height: 72 mm - Saw blade diameter: 250–315 mm - Saw blade speed: 5,000 rpm - Cutting width: 1,250 mm - Sliding table length: 3,300 mm - Touchscreen control with an eye-level control panel - Electric height and tilt adjustment of the saw blade - Intuitive operating menus with step-by-step guidance for complex operations - Integrated calculator and special functions for angle cuts and chamfering - Tool management for up to ten tools, enabling dimensionally accurate setup without the need for re-referencing after a saw blade change - Keyless “VLock” quick-change saw blade system for fast tool changes - Precision sliding table with interchangeable table lip and sturdy hollow-section profiles, lockable in any position - Ball-bearing-mounted rip fence with adjustment via handwheel and digital display Ljdpfx Ao Advffsh Sjhn - Length stop with smooth-running stop carriage and fine adjustment - Splitting wedge guard for a clear view of the saw blade and workpiece - Dust extraction port on machine stand: 120 mm - Dust extraction port on guard: 60 mm - T74 parallelogram cross table - DIN A4 guide holder - T74 length stop, similar to the above, with continuous stop surface and two hinged stop elements - CE standard - Weight: approx. 1,250 kg

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 506925, functionality: fully functional, operating hours: 261 h, power: 5.5 kW (7.48 HP), planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, overall weight: 1,260 kg, Offering a used MARTIN thickness planer, model T45. Sale due to restructuring of the company. General Technical Specifications: Planing width: 630 mm Maximum planing depth: 12 mm Planing height: 2.8 - 300 mm Minimum workpiece length: 270 mm Weight: approx. 1,200 kg Table length: 1260 mm Speed: 5000 rpm Thickness table extension 630 x 450 mm, foldable Year of manufacture: 2011 5.5 kW (7.5 hp); maximum planing width 630 mm The machine provides first-class results in planing operations. Operation: 1-axis control for planing dimensions, maximum 99 values can be stored, Button for manual quick and fine adjustment of the planing thickness according to the digital display, Push buttons for starting and stopping the cutterhead, Cutterhead: TERSA full-steel cutterhead Z4 D=125 mm; including locking mechanism for easy cutter replacement Groove for accommodating planing cutters. Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles, preventing tipping, table surface finely planed. Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers D=85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. Lhodpfxszwpvaj Ah Sen Extraction: High-swiveling, split hood with chip extraction connection D=160 mm, Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease nipples. The machine is still connected and can be tested. Price is quoted plus VAT.

Condition: used, Year of construction: 1986, Used Machine Ledpfozyy Dasx Ah Sohn Year of manufacture: 1986 Features and technical specifications: - Cutting length: 2700 mm - Cutting width: 1050 mm - Cutting height: approx. 145 mm - Motor: 5.5 kW - 2,800 - 4,000 - 5,500 rpm - Hydraulic lifting, lowering, and swiveling of the saw unit up to a maximum of 45.5° - With scoring unit - With parallel cutting device Weight: approx. 1,270 kg

Condition: like new (used), Year of construction: 2020, operating hours: 635 h, functionality: fully functional, Turn and loosen digestate, silage maize and compost in a drying container so moisture escapes evenly and the volume drops sharply, even with heavy, poorly flowing material. This MULTIMIX HD screw mixer from Martin Energietechnik is the heavy-duty version, built for separated digestate that the standard model cannot handle. Built 10/2020, approx. 635 operating hours, as-new condition. Checked, serviced and ready for use by us. All 5 screws are in good condition. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Pickup and transport (750 kg gross) have to be scheduled. Best for: biogas plants and farms that dry digestate, silage maize or compost in containers. Not suitable for: drying containers with dimensions other than those listed below. Fits drying containers with: • Length 6500 mm • Inner width 2314 mm Ledpsz Rv Tdofx Ah Sjhn • Inner height 2090 mm • Round-tube track D = 89 mm What the equipment means in practice: 4.4 kW drive motor with heavy-duty chains: strong drive for heavy material, and the automatic chain tensioner keeps the chain tight by itself 5 conical special screws for silage maize and digestate: matched to a container height of 2090 mm Travel drive with 4 driven wheels: the unit moves along the track on its own PLC control with manual and automatic mode: set the pause time of the reversing cycle steplessly, then let it run Trailing cable approx. 10 m with CEE 16 A plug, 5-pole: connects to standard three-phase power Complete package: base unit with 4.4 kW motor, chain drive with automatic tensioner, 4-hole flange for the screws, 5 conical special screws, travel drive, control cabinet with PLC (safety functions, manual/automatic mode) and connection cable to the unit. The machine in detail: compared with the standard model, the HD version has, according to the manufacturer, a wider base frame, special screws, higher drive power and a reinforced drive train. Technical data: Martin Energietechnik, MULTIMIX HD, built 10/2020, approx. 635 h, 4.4 kW, CEE 16 A 5-pole, gross/net weight 750 kg / 695 kg, customs tariff no. 8479.8220, country of origin Germany. Condition: as new, usual cosmetic signs of use. Location: 6064 Kerns (self pick-up, transport by arrangement). Price: CHF 15,000. Why you can buy with confidence: built 10/2020, approx. 635 operating hours, checked and serviced by us, all 5 screws in good condition, in-person inspection in Kerns by appointment. Inspect and test before you buy: you may verify identity, condition, completeness and operation at inspection or pickup. We guarantee what we control: the machine is what this listing says it is, complete and functional when you see it. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: this is a single used machine, not ongoing stock. Once sold, this exact configuration is gone. First-buyer bonus: buy by October 27, 2026 and receive CHF 1,000 off, so CHF 14,000 instead of CHF 15,000. Valid until October 27, 2026, or until the machine is sold. Action: send us your intended application, required capacity and destination. We will confirm suitability and provide a transport estimate.

Condition: used, Year of construction: 1980, Martin Spindle Moulder Model: Martin T 23 Year of manufacture: 1980 Spindle diameter: 30 mm Spindle stroke: 145 mm Max. tool diameter: 250 mm Pole-changing motor: 4.7/5.7 kW 2 speeds: 3000, 6000 rpm Table size: approx. 940 x 1100 mm Table height: approx. 850 mm Lhsdpfx Aey Rzyteh Ssn Automatic motor brake Emergency stop switch Weight: approx. 800 kg

Condition: like new (used), Year of construction: 2020, operating hours: 20 h, power: 10 kW (13.60 HP), input voltage: 400 V, input frequency: 50 Hz, planing width: 630 mm, Thicknesser T45 by Martin with Spiral cutterhead Lhodpjz R Nqqefx Ah Ssn Planing width approx. 630 mm Planing height adjustable electrically from 2.8 to 300 mm, reading via digital display with 1/10 mm accuracy and positioning control The control system also offers the possibility of incremental adjustment. Furthermore, 99 fixed values can also be stored as a program. Drive motor 10 kW with automatic motor brake Spiralcutterhead Feed speed 6 + 12 m/min Rubberized infeed roller 2 pice Rubberized outfeed roller Planed machine table guided on four lead screws and guides for optimal stability Low-noise design with soundproof hood Dust extraction connection 160 mm Emergency stop at the front and rear Operating manual CE marking Dimensions approx. 1200 x 1300 x 1250 mm (L x W x H). Weight approx. 1200 kg. Transport throughout Europe can be arranged at a good price.

Condition: used, Martin T 65 C Automatic panel saw Heavy-duty precision panel saw 5.7" touchscreen LCD color display at eye level Motor: 5.5 kW Saw blade adjustable from 0 to 46° Cutting height up to 204 mm Saw blade diameter up to 550 mm Ledpfj Aba Dmex Ah Sshn “ProLock” quick-change system for saw blades Anodized aluminum length stop with continuous support, fine adjustment for both folding stops, scale with magnifying glass, and electronically assisted length compensation for angled cuts. Extendable cutting length: 95–3,220 mm Rip fence length: 3,000 mm Electromotive parallel fence positioning with control system integration, anodized, folding aluminum guide rail, and four-point ball bearing guide. Safety area (0–200 mm) in hold mode, display resolution 0.1 mm, repeatability ±0.05 mm. Cutting width with parallel fence: 1,100 mm Double miter fence MitreX CE version Machine is WORKS-TESTED, in very good condition, from a small business First delivery 2016 Ex works

Condition: used, Year of construction: 1994, functionality: fully functional, Martin swivel spindle milling machine T25 with accessories Functional Lhedpfj Aaz H Tsx Ah Ssn Location: Freising Inspection is welcome. We have other used machines available. Please contact us.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 471292, functionality: fully functional, operating hours: 438 h, power: 7.5 kW (10.20 HP), spindle diameter: 40 mm, rotational speed (max.): 9,000 rpm, total length: 3,000 mm, total width: 1,500 mm, total height: 1,820 mm, overall weight: 1,150 kg, Equipment: documentation/manual, Offering a used Martin T26 Duo Control swivel spindle milling machine for sale. Sale due to company restructuring. GS tested, BG test certificate, CE compliant. Technical data: Spindle swivel: -45 to +45° Height adjustment: electric with rapid and slow feed Depth adjustment: electric Table opening: electrically adjustable from 70 - 220mm Swivel adjustment: electric Feed rate (height): electric Stop adjustment: manual Height display: digital Swivel angle display: digital Milling stop display: digital Spindle diameter: 40mm with steep taper SK 40, collet quick-change system incl. torque wrench Electropneumatic locking via selector switch. Spindle speeds: 3000, 4500, 6000, 9000 rpm Power consumption: 7.5 / 9.5 kW Motor brake: wear-free, electrically braked Dust extraction connection: 2 x 120mm Lsdezwp Uiepfx Ah Sohn Machine length: 3000mm Machine width: 1400mm Weight: 1150kg Year of manufacture: 2007 Includes: Variomatic 4N feed system, continuously adjustable from 2-20 m/min, Protective device type Centrex Swivel device for milling stop Martin table extension on both sides with extendable workpiece support, approx. 3000mm long. Martin support for feed system, swivelable, with motorized height adjustment. Aigner Integral stop 650/500mm incl. filler bar. The machine is still connected and can be tested. Price plus VAT.

Condition: used, Year of construction: 1981, used, in good condition cleaned, lubricated partially overhauled fully adjusted parts replaced Brand: Martin Model: T 70 Year of manufacture: 1981 Machine no.: V-112873 GS-tested Motor: 4.8 kW Steel guides Cutting length approx. 2700 mm Tiltable up to 45° Lhsdowkvw Topfx Ah Ssn Parallelogram guard Table extension Height adjustment hydraulic Tilting adjustment hydraulic Mitre fence Extraction connection D 120/80 mm Required space approx. 2800 mm x 3400 mm x 1200 mm Weight approx. 1000 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without any warranty or liability

Condition: new, Year of construction: 2025, Martin T 27 Flex Swivel Spindle Moulder – double-sided tilting – Flexibility for today and tomorrow. Setting up a tilting spindle moulder is usually a major challenge. Not with the T27 Flex and its modern touchscreen control: thanks to integrated tool offset management, you can set up even complex moulding profiles with a tilted spindle in no time. This allows you to make full use of the wide swivel range of 2 x 46°, letting you follow your requirements with complete flexibility. Additionally, the machine can be configured precisely to suit the specific needs of your operation. Equipment includes: - T 27 Flex - T 2711-a Digital indication of fence jaw position via the control system Lodpjr Hr D Njfx Ah Sshn - T 2731-a Table extension on both sides + extendable workpiece support - T 2740-a Centrex guard - T 2742-a Integral fence - T 2743-a Auto Lock spindle moulder fence jaw clamping system - T 2790-La Console for feed unit stand, left side attachment The photo shows a sample machine only / feed unit and support not included Included scope of delivery is described in the text above Location: Arriving in stock at 54634 Bitburg - Available in two weeks -

Condition: used, Year of construction: 1979, Working width: 630 mm Planing height: 220 mm Planing shaft: Strip cutter Number of cutters: 4 Ledpfx Aoz I Iutjh Sehn Height adjustment: Handwheel Planing thickness indicator: Scale Feed rate: infinitely variable Infeed roller: Rubber Outfeed roller: Rubber Table rollers: yes Motor power: 5.5 kW Dust extraction connection: 160 mm Machine length: 1200 mm Machine width: 1200 mm Weight: 1000 kg

Condition: used, Year of construction: 1987, machine/vehicle number: 152336, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, cutting width (max.): 1,250 mm, saw blade diameter: 450 mm, For sale is a robust and reliable Martin T72 panel saw, manufactured in Germany to the highest quality standards. This machine comes from Otto Martin Maschinenbau and is known for its high precision, stability, and durability. It is ideal for carpentry shops, joineries, or ambitious woodworkers. Further technical data: Saw blade diameter: 200 - 450 mm Sliding table length: 2200 mm Speeds: 2,800 / 4,000 / 5,500 rpm Rated current: 11.0 A Lhodjz Rvubspfx Ah Son The machine is in used condition and was in service until recently. The Martin T72 impresses with its solid construction and the high processing quality typical of Martin. The machine is sold without an extension arm and rip fence. Inspection and a test run can be arranged. The machine is sold without warranty due to its age. It still needs to be checked whether the digital display on the parallel fence is working!

Condition: used, Year of construction: 1983, Working width: 510 mm Planing cutterhead: Spiral cutter Number of cutters: 2 Feed table length: 2800 mm Feed table adjustment: hydraulic / foot pedal Adjustment for rabbet and chamfer joints: yes Chip removal display: scale Rabbet and chamfer joint display: scale Adjustable angle of the fence: yes Lhsdpozq Dcbefx Ah Ssn Motor power: 5.5 kW Motor brake: yes, automatic Machine length: 2800 mm Machine width: 1000 mm Weight: 1050 kg

Condition: excellent (used), Year of construction: 2008, Control panel, suspended, swiveling, and with template holder 5.7″ touchscreen control Variable saw blade speed 2-axis scoring unit, electrically adjustable Parallelogram crosscut table with “RadioCompense” angle cut and length compensation system Pre-set indexing points for 0°, 22.5°, 30°, 45° on the parallelogram crosscut table Ledpfx Ahj Aaz E Ao Sjhn Rip fence with stop flap and digital dimension display Extendable parallelogram crosscut table with support roller Parallel stop can be lowered under the table in the end position Table extension 600 x 400 mm with integrated storage compartment “ProLock” quick-change system for saw blade Central lubrication including miter stop for cutting acute angles Sliding table length: 3300 mm Cutting width: 1100 mm Cutting width with rip fence: 3400 mm Cutting height: 170 mm Saw blade diameter max.: 500 mm (400 mm with scoring unit) Saw blade speeds: 2000 - 6000 rpm Saw blade tilt: 0 – 46° Motor power: 7.5 kW, 400 V, 50 Hz Working height: 900 mm Dust extraction connection: 80 and 120 mm Transport dimensions approx. L x W x H: 3550 x 1850 x 1620 mm Weight approx.: 1800 kg