Used Martin Midline 924 for sale (100)

Condition: used, Year of construction: 2023, Circular saw Manufacturer: Martin Type: T65 Year of manufacture: 2023 Operating hours: approx. 58 h Table: 860 x 1,370 mm Sliding table length: 3,300 mm Cutting width: 1,350 mm Power: 5.5 kW Speeds: 2,800 / 4,000 / 5,000 rpm Cutting height: max. 204 mm Kdjdpoz U Hh Tsfx Acpou Saw blade diameter: max. 550 mm Cutting width adjustment: Manual, digital display Height and angle adjustment: Electric The machine table has some surface rust.

Condition: good (used), Table milling machine Martin T 25. Kdedpfxoy Srtmj Acpju

Condition: like new (used), Year of construction: 2020, operating hours: 635 h, functionality: fully functional, Turn and loosen digestate, silage maize and compost in a drying container so moisture escapes evenly and the volume drops sharply, even with heavy, poorly flowing material. This MULTIMIX HD screw mixer from Martin Energietechnik is the heavy-duty version, built for separated digestate that the standard model cannot handle. Built 10/2020, approx. 635 operating hours, as-new condition. Checked, serviced and ready for use by us. All 5 screws are in good condition. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Pickup and transport (750 kg gross) have to be scheduled. Best for: biogas plants and farms that dry digestate, silage maize or compost in containers. Not suitable for: drying containers with dimensions other than those listed below. Fits drying containers with: • Length 6500 mm • Inner width 2314 mm • Inner height 2090 mm • Round-tube track D = 89 mm What the equipment means in practice: 4.4 kW drive motor with heavy-duty chains: strong drive for heavy material, and the automatic chain tensioner keeps the chain tight by itself 5 conical special screws for silage maize and digestate: matched to a container height of 2090 mm Travel drive with 4 driven wheels: the unit moves along the track on its own PLC control with manual and automatic mode: set the pause time of the reversing cycle steplessly, then let it run Trailing cable approx. 10 m with CEE 16 A plug, 5-pole: connects to standard three-phase power Complete package: base unit with 4.4 kW motor, chain drive with automatic tensioner, 4-hole flange for the screws, 5 conical special screws, travel drive, control cabinet with PLC (safety functions, manual/automatic mode) and connection cable to the unit. The machine in detail: compared with the standard model, the HD version has, according to the manufacturer, a wider base frame, special screws, higher drive power and a reinforced drive train. Technical data: Martin Energietechnik, MULTIMIX HD, built 10/2020, approx. 635 h, 4.4 kW, CEE 16 A 5-pole, gross/net weight 750 kg / 695 kg, customs tariff no. 8479.8220, country of origin Germany. Condition: as new, usual cosmetic signs of use. Kodpfxoz Rv Tdj Acpodu Location: 6064 Kerns (self pick-up, transport by arrangement). Price: CHF 15,000. Why you can buy with confidence: built 10/2020, approx. 635 operating hours, checked and serviced by us, all 5 screws in good condition, in-person inspection in Kerns by appointment. Inspect and test before you buy: you may verify identity, condition, completeness and operation at inspection or pickup. We guarantee what we control: the machine is what this listing says it is, complete and functional when you see it. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: this is a single used machine, not ongoing stock. Once sold, this exact configuration is gone. First-buyer bonus: buy by October 27, 2026 and receive CHF 1,000 off, so CHF 14,000 instead of CHF 15,000. Valid until October 27, 2026, or until the machine is sold. Action: send us your intended application, required capacity and destination. We will confirm suitability and provide a transport estimate.

Condition: used, Year of construction: 1994, functionality: fully functional, Martin swivel spindle milling machine T25 with accessories Functional Location: Freising Inspection is welcome. We have other used machines available. Please contact us. Kdedps Aaz H Tofx Acpju

Condition: like new (used), Year of construction: 2019, operating hours: 137 h, T45 thicknesser by Martin with Tersa cutterhead Planing width approx. 630mm Planing height adjustable electrically from 2.8 to 300mm, with digital display providing readings in 1/10mm increments and positioning control The control system also offers the option of incremental adjustment, i.e., you can set a value such as 1mm and then, by repeatedly pressing the start button, change the planing height by 1mm each time without having to set a new absolute height each time. Furthermore, 99 fixed values can also be stored as a program. Kdjdpoz Icvlefx Acpeu Drive motor 5.5kW with automatic motor brake 4-knife Tersa cutterhead with new knives Feed rate 6 + 12m/min Rubber-coated infeed roller Rubber-coated outfeed roller Planed machine table guided on four threaded spindles and guides for optimum stability Low-noise design with soundproof hood Dust extraction port 160mm Emergency stop at the front and rear New Tersa knives Operating manual CE marking Original paint, not repainted Carpet in original condition No scratches on the table! Only 137 operating hours, i.e. only 25 minutes per week!!! Dimensions approx. 1200 x 1300 x 1250mm (LxWxH). Weight approx. 1200kg. The machine can be demonstrated on site by appointment. We only offer machines that are readily available in our warehouse for demonstration, see "other offers from this provider".

Condition: like new (used), Year of construction: 2020, operating hours: 20 h, power: 10 kW (13.60 HP), input voltage: 400 V, input frequency: 50 Hz, planing width: 630 mm, Thicknesser T45 by Martin with Spiral cutterhead Planing width approx. 630 mm Planing height adjustable electrically from 2.8 to 300 mm, reading via digital display with 1/10 mm accuracy and positioning control The control system also offers the possibility of incremental adjustment. Furthermore, 99 fixed values can also be stored as a program. Drive motor 10 kW with automatic motor brake Spiralcutterhead Feed speed 6 + 12 m/min Rubberized infeed roller 2 pice Rubberized outfeed roller Planed machine table guided on four lead screws and guides for optimal stability Low-noise design with soundproof hood Dust extraction connection 160 mm Emergency stop at the front and rear Operating manual CE marking Dimensions approx. 1200 x 1300 x 1250 mm (L x W x H). Weight approx. 1200 kg. Transport throughout Europe can be arranged at a good price. Kdjdpfjz R Nqqex Acpou

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 506925, functionality: fully functional, operating hours: 261 h, power: 5.5 kW (7.48 HP), planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, overall weight: 1,260 kg, Offering a used MARTIN thickness planer, model T45. Sale due to restructuring of the company. General Technical Specifications: Planing width: 630 mm Maximum planing depth: 12 mm Planing height: 2.8 - 300 mm Minimum workpiece length: 270 mm Weight: approx. 1,200 kg Table length: 1260 mm Speed: 5000 rpm Thickness table extension 630 x 450 mm, foldable Year of manufacture: 2011 5.5 kW (7.5 hp); maximum planing width 630 mm The machine provides first-class results in planing operations. Operation: 1-axis control for planing dimensions, maximum 99 values can be stored, Button for manual quick and fine adjustment of the planing thickness according to the digital display, Kdjdpfx Acjzwpvaspju Push buttons for starting and stopping the cutterhead, Cutterhead: TERSA full-steel cutterhead Z4 D=125 mm; including locking mechanism for easy cutter replacement Groove for accommodating planing cutters. Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles, preventing tipping, table surface finely planed. Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers D=85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. Extraction: High-swiveling, split hood with chip extraction connection D=160 mm, Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease nipples. The machine is still connected and can be tested. Price is quoted plus VAT.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 471292, functionality: fully functional, operating hours: 438 h, power: 7.5 kW (10.20 HP), spindle diameter: 40 mm, rotational speed (max.): 9,000 rpm, total length: 3,000 mm, total width: 1,500 mm, total height: 1,820 mm, overall weight: 1,150 kg, Equipment: documentation/manual, Offering a used Martin T26 Duo Control swivel spindle milling machine for sale. Sale due to company restructuring. GS tested, BG test certificate, CE compliant. Technical data: Spindle swivel: -45 to +45° Height adjustment: electric with rapid and slow feed Depth adjustment: electric Table opening: electrically adjustable from 70 - 220mm Swivel adjustment: electric Feed rate (height): electric Stop adjustment: manual Height display: digital Swivel angle display: digital Milling stop display: digital Kedezwp Uiepfx Acpodu Spindle diameter: 40mm with steep taper SK 40, collet quick-change system incl. torque wrench Electropneumatic locking via selector switch. Spindle speeds: 3000, 4500, 6000, 9000 rpm Power consumption: 7.5 / 9.5 kW Motor brake: wear-free, electrically braked Dust extraction connection: 2 x 120mm Machine length: 3000mm Machine width: 1400mm Weight: 1150kg Year of manufacture: 2007 Includes: Variomatic 4N feed system, continuously adjustable from 2-20 m/min, Protective device type Centrex Swivel device for milling stop Martin table extension on both sides with extendable workpiece support, approx. 3000mm long. Martin support for feed system, swivelable, with motorized height adjustment. Aigner Integral stop 650/500mm incl. filler bar. The machine is still connected and can be tested. Price plus VAT.

Condition: excellent (used), Year of construction: 2008, Control panel, suspended, swiveling, and with template holder 5.7″ touchscreen control Variable saw blade speed 2-axis scoring unit, electrically adjustable Parallelogram crosscut table with “RadioCompense” angle cut and length compensation system Pre-set indexing points for 0°, 22.5°, 30°, 45° on the parallelogram crosscut table Rip fence with stop flap and digital dimension display Extendable parallelogram crosscut table with support roller Parallel stop can be lowered under the table in the end position Table extension 600 x 400 mm with integrated storage compartment “ProLock” quick-change system for saw blade Central lubrication including miter stop for cutting acute angles Sliding table length: 3300 mm Cutting width: 1100 mm Cutting width with rip fence: 3400 mm Cutting height: 170 mm Kdedpfxs Aaz E As Acpju Saw blade diameter max.: 500 mm (400 mm with scoring unit) Saw blade speeds: 2000 - 6000 rpm Saw blade tilt: 0 – 46° Motor power: 7.5 kW, 400 V, 50 Hz Working height: 900 mm Dust extraction connection: 80 and 120 mm Transport dimensions approx. L x W x H: 3550 x 1850 x 1620 mm Weight approx.: 1800 kg

Condition: used, Martin T 65 C Automatic panel saw Kodpfxj Aba Dme Acpjdu Heavy-duty precision panel saw 5.7" touchscreen LCD color display at eye level Motor: 5.5 kW Saw blade adjustable from 0 to 46° Cutting height up to 204 mm Saw blade diameter up to 550 mm “ProLock” quick-change saw blade system Anodized aluminum rip fence with continuous support, fine adjustment of both folding fences, scale with magnifying glass, and electronically assisted length compensation for angled cuts. Extendable cutting length: 95–3,220 mm Rip fence length: 3,000 mm Electromotive parallel fence positioning with control system integration, anodized, foldable aluminum guide rail, and quadruple ball bearing guide. Safety zone (0–200 mm) in hold mode, display resolution 0.1 mm, repeat accuracy ±0.05 mm. Cutting width with parallel fence: 1,100 mm Double miter fence MitreX CE version Machine is WORKS TESTED and in very good condition, from a small business First delivery in 2016 Ex location

Condition: used, Fixed table 850 x 1100mm in grey cast iron - Table height 900mm - 3.3m sliding table, anodised aluminium construction, wear resistant tempered guides with self cleaning design. Replaceable table edge. Infinitely locking design - Min / max blade dia 250mm - 400mm giving 130mm max cutting height at 90 degrees 30mm bore with 2 x 8mm drive pins / 60mm ctres. - 5.5kw motor 4000 / 4800 / 6000 rpm rotation speed - Blade tilting up to 46 degrees - Power rise / fall / tilt, with rapid and slow creep movement - Riving knife mounted saw guar - Pro lock quick change system of the saw blade - Rip fence with easy sliding movement thanks to four grooved ball bearings. Micro metric adjustment and scale. Movement via handwheel - Cutting width - blade to rip fence 1350mm - Cross cut fence in anodised aluminium with continuous support, micro adjustment for both flip stop. Cutting length 95 to 2000mm, can be extended to 3220mm - Cross cut table in galvanised steel construction Kdjdpoz N Hcmefx Acpju - Operating controls easily accessible on main frame - Dust extraction connection 100mm on overhead guard and 120mm dia in machine frame - 2 x riving knives 3.5" TFT overhead control unit at eye level with keyboard. - Electronic control of cutting height / cutting angle in program memory - Tool calculation including storage of 50 blades - Memory of 10 cut lists each with 50 cutting lines - FK for shortcut to frequently used functions - USB interface -2 axis scoring saw electrically adjustable. Scoring saw height and left / right position can be electrically adjusted while blade is running. Pneumatic lifting / lowering - Handndwheel adjustment of the rip fence and digital indication in control panel - 1 x 350mm dia main blade and solid scoring blade - 3.3m sliding table - Parallelogram crosscut table with analogue stop - LCD readout of angle setting

Condition: excellent (used), Year of construction: 2000, Robust oscillating milling machine T 26, swiveling from -45 to +45 degrees. Ksdezbm Tfepfx Acpedu Reversible drive motor 5 / 6kW with automatic motor brake. R/L rotation. Swiveling angle from -45 to +45 degrees, electrically adjustable. Height adjustment max. 150mm, electrically adjustable. When adjusting the height, the correction factor for the swiveling angle is displayed in the upper display, which can then be set on the stop, thus allowing settings to be realized according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm. Spindle diameter 30mm, quick-change spindle with torque wrench. Comfort fence T226 with digital displays for total adjustment and infeed fence individually, as well as input of the cutter diameter, whereby the cutting depth is calculated automatically. Fence with lifting device, can be swung away (for curved milling). Table extension on the right and left with extendable workpiece support. Support can be extended by 700mm. Table length approx. 2400mm. Foldable fence for edge milling. Workpiece clamping device Aigner Centrex. Original Martin cast iron table, left 500mm, right 500mm with two insert guide rails. 3-roller feed system HolzHer ET117, with 8 speeds, R/L rotation, new rollers. Feed plug, switchable from the control panel. Comfort stand with electrically height-adjustable feed support, which can be swung away for machine setup and then easily locked into place. Dust extraction port 2 x 120mm. Compressed air connection 6bar. Emergency stop switch. Some parts of the machine have been newly painted (special color RAL1015). V-belts renewed. Operating manual. CE marking. Dimensions approx. 3000 x 1500 x 1830mm (L x W x H). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration, see "other offers from this supplier".

Condition: used, Year of construction: 2000, Motor: 7.5 kW Tersa cutterhead, Z = sliding rollers in the thickness table, height-adjustable, steel feed roller, ribbed, infeed roller before and after the thickness table, safety bar. Cutterhead speed: 5000 rpm. Planing height: 2.8 - 250 mm with digital display. Planing width: 630 mm. Max. chip removal: 8 mm. Dust extraction port: 160 mm. Weight: approx. 1115 kg. Dimensions: 1140 x 1260 x 1200 mm. Kedpfx Ae Aay D Rocpjdu Location: Supplier.

Condition: used, Year of construction: 2000, Working width: 500 mm Motor: 5.5 kW with motor brake Tersa cutterblock, Z=2 Speed: 5,000 rpm max. Maximum chip removal: 8 mm Adjustable planer table with motorized height adjustment Angled fence with integrated auxiliary fence Kdsdpfxs Aay D De Acpeu Suvamatic cutter guard Weight: approx. 1000 kg Dimensions: 2850 x 850 x 1110 mm Location: Supplier

Condition: used, • Heavy-duty table router Martin T27 Flex • Router spindle, automatically pivotable on both sides +/- 46° • Automatic up/down movement • Table extension on the left and right (total length 2400 mm) Kdedpfe Aazc Iex Acpju • Pull-out support for frame pieces • Swiveling device for router fence • Fence for mortising • Integrated fence • Router fence manually adjustable • Control panel at eye level, rotatable, with a 5.7" touchscreen • Spindle stroke 150 mm • Router spindle diameter 30 mm • Router spindle with 6 speeds: 3000 to 10,000 rpm • Motor 6 kW with electric brake • Including 4-roller feed system • Machine is WORKSHOP-TESTED and in VERY GOOD CONDITION • First delivery in 2017 • Available from stock in Lieboch

Condition: used, Year of construction: 1987, machine/vehicle number: 152336, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, cutting width (max.): 1,250 mm, saw blade diameter: 450 mm, For sale is a robust and reliable Martin T72 panel saw, manufactured in Germany to the highest quality standards. This machine comes from Otto Martin Maschinenbau and is known for its high precision, stability, and durability. It is ideal for carpentry shops, joineries, or ambitious woodworkers. Further technical data: Saw blade diameter: 200 - 450 mm Kdodpfx Acsz Rvubopou Sliding table length: 2200 mm Speeds: 2,800 / 4,000 / 5,500 rpm Rated current: 11.0 A The machine is in used condition and was in service until recently. The Martin T72 impresses with its solid construction and the high processing quality typical of Martin. The machine is sold without an extension arm and rip fence. Inspection and a test run can be arranged. The machine is sold without warranty due to its age. It still needs to be checked whether the digital display on the parallel fence is working!

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 155 mm, cutting width (max.): 1,350 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 5,000 rpm, rotational speed (min.): 1,000 rpm, total length: 3,300 mm, total width: 1,985 mm, total height: 1,510 mm, overall weight: 1,100 kg, table height: 900 mm, Equipment: documentation/manual, rotational speed infinitely variable, saw blade guard, • Smooth-running saw blade Kdodpfx Acozvdwpspsu • Cutting width 1350 mm • Precisely operating crosscut table, length 3.3 m • Easy-to-use parallel guide • 7'' touchscreen control panel • Modern SynchroDrive drive technology • Handwheel for positioning the parallel guide • Guide plate holder • Electronic preparation for retrofitting a scoring unit • Standard cross table for length stop for miter cuts up to approximately ± 47° • Table extension at the rear 700 x 855 mm – standard • Weight approximately 1,100 – 1,400 kg

Condition: used, Year of construction: 2026, New demonstration machine! General technical features: - Control: 7.0" touchscreen ConnectTouch control - Cutting height and cutting angle electronically controlled, digital input of cutting height and angle (controlled positioning of the motorized axes) and movement of the motorized axes in hold mode (axis movement via push button); display resolution: 0.1 mm or 0.01°; repeat accuracy ± 0.05 mm or ± 0.005° - Weight: approx. 1,600 - 2,200 kg - Table size: 860 mm x 1,270 mm in gray cast iron, table extension as standard across the entire table width - Table height: 900 mm - Stand: The machine stand is a stable, thick-walled composite structure, implemented in this form and perfection exclusively by MARTIN. The intelligent combination of the two materials, steel and concrete, creates a high-quality stand that is unsurpassed in terms of stability, damping capacity and torsional stiffness. - Tools: Diameter 250 - 450 mm, optionally up to 550 mm, main saw blade ø 30 mm with additional holes, scoring saw ø 36 mm, tool cutting width max. 20.0 mm for machines with single-sided tilting, 6 mm for machines with double-sided tilting; saw blades up to 350 mm can be lowered under the table. Special tool diameter max. 400 mm, weight max. 12.0 kg - Tool change: Quick-change system ProLock - Tool tilt: 0° to + 47°, tilting only possible with saw blades up to 6 mm cutting width - Cutting height: 0°: max. 155 mm / saw blade ø 450 mm; T7710/1: +45°: 106 mm / ø 450 mm; T7710/2: +45°: 104 mm / ø 450 mm; -45°: 88 mm / ø 450 mm; optionally 123 mm / ø 550 mm - Motor: State-of-the-art synchronous motor SynchroDrive with large power reserves in energy efficiency class IE4 - Motor power: 5.5 kW, due to its design, the motor can be overloaded several times its rated power for a short period of time and thus offers large power reserves - Speed: Continuously variable 1,000 - 5,000 rpm - Control panel: The control panel is at eye level and is rotatably mounted around its vertical axis. In addition, it can be swiveled to the right, so that larger components can also be processed easily - Rip fence: Standard length 3,000 mm, table length corresponds to cutting length; position-independent locking; guides hardened, wear-resistant, self-cleaning; table edge replaceable; made of anodized aluminum - Length stop: Made of anodized aluminum with continuous support, fine adjustment for both flap stop elements; dimension display via scale with magnifying glass; cutting length 95 - 2000 mm, extendable up to 3220 mm - Cross table: Made of powder-coated steel, workpiece support in anodized aluminum, two sliding supports for extending the support area; length stop can be placed in the front and rear position without lifting; one-hand clamping on the support surface 1340 x 650 mm - Surfaces: Stand: Stand with high-quality powder coating, Cast iron: Table surface finely milled, Aluminum: Aluminum components anodized - Protective cover / extraction: Height-adjustable protective cover incl. interchangeable rear part for miter cuts; protective cover for saw blades up to ø 450 mm (optionally 550 mm); extraction connection on the cover: Ø 80 mm, on the machine stand Ø 120 mm; total extraction connection Ø 140 mm; minimum air volume: Vmin 18.5 m3/min at 20 m/s, negative pressure 1,400 Pa - Electrical equipment: Contact for controlling the extraction; motor protection switch and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (control panel, stand) Kodpfjz A Hh Uox Acpjdu

Condition: used, Year of construction: 1992, completely shut down used good condition Kdsdpfx Asz Np I Ejcpsu cleaned functionally tested partially overhauled Manufacturer: Martin Type: T 53 Year of manufacture: 1992 Machine no.: V190268 GS-tested for wood dust Control panel at the top Pendulum guard Table edges with low noise Safety cutter block Table adjustment with foot-operated hydraulics Digital display for chip thickness Digital display for groove depth Automatic brake Groove depth adjustment Motor kW: 5.5 Planing width approx. mm: 510 Table length approx. feeding length mm: total 2840 Dust extraction connection D mm: 160 Space requirement approx. L x W x H mm: 2900 x 900 x 1100 Weight approx. kg: 1000 Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without guarantee or warranty.

Condition: excellent (used), MARTIN T27 Flex underspindle milling machine Ksdpfoz N Eywex Acpsdu Spindle adjustable up and down, and at an angle of -46 to +46 degrees, electrically Interchangeable spindle shank, 30 mm diameter Long worktables, 240 cm, with extension Adjustable fence with AIGNER guides 4-roller feed system, WEGOMA 6 spindle speeds: 3000, 4000, 5000, 6000, 8000, 10,000 rpm 6 kW, 2-speed motor Brake Very good condition, 400 operating hours

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, total length of planing tables: 1,260 mm, total width: 1,280 mm, total height: 1,220 mm, overall weight: 1,200 kg, Equipment: CE marking, documentation/manual, • Operation: 1-axis control for planing dimensions, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence. • Buttons for manual quick and fine adjustment of the planing thickness according to the digital display. • Push buttons for starting and stopping the cutterhead. • Integrated operating hour counter. • TERSA all-steel cutterhead with 4 knives. • 2nd rubber feed roller, 85 mm, complete. • Thickness table extension, foldable, 630 x 450 mm. Kodpfx Ajzvfm Ejcpsdu • Thickness table: Electric thickness table adjustment with fine adjustment, feed speed 10 mm/s, mounted on 4 support spindles to ensure stability, table surface finely planed. • Feed: 2 speeds 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. • Extraction: High-pivoting, divided hood with chip extraction connection Ø 160 mm, can be connected on the left or right (on both sides in special cases), minimum extraction air volume: 27 m³/min. at 20 m/s. • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutterhead via grease nipples. • Weight: approx. 1,200 – 1,400 kg • Workpiece length min. 270 mm.

Condition: used, Year of construction: 1985, functionality: fully functional, Slide carriage length: 3320 mm Motor power: 5.5 kW Cutting height: approx. 145 mm Height and swivel adjustment via foot-operated hydraulic system Kdjdpfx Acoz Iv Hqepeu

Condition: used, This listing is for the Hulme Martin 3151 Heat Sealer Kdedpfx Acexhgc Ejpeu The unit is in full working condition and is ready for immediate use This model Includes Cool and Heat Cool Electronic Controls

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 66091, input voltage: 380 V, power: 0.37 kW (0.50 HP), type of input current: three-phase, The Martin Mechanic MAS 493/77 is an industrial quilting machine (a special stitching machine) used in the textile industry for quilting and tufting pillows or mattresses. Kedpfx Ajzzdulecpjdu Key technical features of the machine: Application: Specifically designed for heavy-duty materials such as garden cushions, standard pillows, and mattresses. Maximum thickness: Can quilt materials up to 130 mm thick. Quilting function: The machine automatically stitches decorative or reinforcing rings with a diameter ranging from 8 to 18 mm. If you are interested, please include your contact information in your inquiry.

Condition: used, Year of construction: 2000, Spindle swivels: Yes, -45 to +45° Height adjustment: electric Swivel adjustment: electric Stop adjustment: manual Height display: digital Kdjdpjzdzbzjfx Acpsu Swivel angle display: digital Milling stop display: digital Spindle diameter: 30 mm, 40 mm Speeds: 3000, 4500, 6000, 9000 Power consumption: 5 / 6 kW Motor brake: Yes, automatic Dust extraction port: 2 x 120 mm Machine length: 2500 mm Machine width: 1400 mm Weight: 1100 kg