Used Masturn 50 for sale (33,472)

Condition: ready for operation (used), Year of construction: 2012, operating hours: 5,812 h, functionality: fully functional, Baling press Presto HPK 50 HS, year of manufacture 2012, with perforator and inclined belt (sliding belt conveyor) Manufacturer: Presto Type: HPK 50 HS Year of manufacture: 2012 Operating hours: 5812 Drive: 30 kW Pressing force: 50 t Feed opening: 1600 x 650 mm (L x W) Channel cross-section: 700 x 950 mm Feed volume, max. 1.06 m³ Cycle time: 19 s Binding: 4-fold Throughput at Nwodpfx Aszk Dbwjm Tji 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (L x W x H) Machine weight: approx. 10,500 kg Perforator, hydraulically adjustable Drive power: 2 x 4 kW / 400 V Throughput: approx. 220 m³/h Clear feed opening: 1380 x 1200 mm Inclined belt Length: 7931 mm Belt width: 1400 mm Overall width: 2026 mm Inclination: 29° Speed: 0.6 m/s Materials: Paper, cardboard, film, PET bottles The press is in working order and has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change, prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty or guarantee.

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Bale press Presto CC 50 M, year of manufacture 2015, with lifting and tilting device Technical data: Manufacturer: Presto Type: CC 50 M Year of manufacture: 2015 Operating hours: 1932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Feed opening: 1030 x 1100 mm Feed volume: 0.85 m³ Tying: 3-fold, wire, manual Nodjzk Auijpfx Am Tjwi Throughput capacity at bulk density of: 35 kg/m³ - 1.3 t 60 kg/m³ - 1.7 t 100 kg/m³ - 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (L x W x H) Machine weight: approx. 4000 kg Materials: Paper, cardboard, film Note: The machine is in good condition. It has been inspected and tested by us in 28816 Stuhr. The video can be found on our website or our YouTube channel. The operating manual is available in German. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors that may occur. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: used, maximum load weight: 52,100 kg, overall weight: 70,000 kg, axle configuration: > 3 axles, first registration: 01/2009, next inspection (TÜV): 03/2026, loading space length: 24,400 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 2,500 mm, Equipment: ABS, Goldhofer Gooseneck Lowboy Trailer * 5 axles, twin-tired * Extendable lowbed (8m) * 1st axle can be lifted * Forced steering on the last 4 axles * Hydraulic supports * Central lubrication system * BPW axles with drum brakes ----* Tires: 235/75 E17.5 * Permissible total weight: 70,000 kg * Tare weight: 17,900 kg Nwodpfx Amowta Dpo Tsi * Loading platform height: 0.85 m * Loading platform width: 2.55 m * Lowbed length: 12.00 m - 20.00 m * Gooseneck length: 4.0 m -----Vehicle number: 11037----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will be happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----* Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing * Arranging financing * Application for export license plates * Vehicle transport * Vehicle registration * Vehicle recovery and transport ----?YOUR VTS TEAM

Year of construction: 2008, condition: good (used), Linear drive, linear gear, lifting gear, spindle drive, linear unit, linear guide, linear axis, short-stroke linear axis, linear motion rail guide, linear table, positioning table -Manufacturer: RK Rose Krieger, positioning table flat short-stroke linear axis for manual adjustment -Type: RK C 80/194 -Travel: 50 mm -Number: 3x linear axis available Nedsxln N Iopfx Am Tjwi -Price: per piece -Dimensions: 305/80/H45 mm -Weight: 1.6 kg/piece

Condition: used, Year of construction: 2005, Technical details: grinding diameter: 5 - 55 mm grinding length: 500 mm centre height: 75 mm total power requirement: 45 kW Nwedpfxezlh Spe Am Tji

Condition: ready for operation (used), functionality: fully functional, The FlexWall®Plus FW40/5 is a dosing device for poorly to severely free-flowing bulk materials. It consists of the following assemblies: a trapezoidal stainless steel housing, a flexible polyurethane trough with a large cross-section, massage paddles, a dosing screw, a screw tube, a three-phase drive and a trapezoidal extension hopper with a volume of 50 dm³ or 70 dm³, with a low installation height. The shape of the trough and the external massage paddles with adjustable amplitude ensure a consistent screw fill level and gentle mass flow of the bulk material. Changing the screw on the FW40/5 is only done from the front. The FlexWall®Plus enables easy disassembly for wet or dry cleaning, with the polyurethane trough simply being pulled off the housing rim. Furthermore, the compact trapezoidal design allows space-saving arrangement of up to six dosing units around a central feeding point. Nedpownr Trofx Am Tewi

Condition: used, mileage: 150 km, power: 120 kW (163.15 HP), first registration: 07/2026, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,400 mm, loading space width: 2,100 mm, loading space height: 450 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, * App-Connect Wireless (or via cable) * Manual air conditioning * Double passenger seat with storage compartment * Digital cockpit * Automatic windshield wiper control Nodsy S Nhnepfx Am Towi * Cruise control * Fuel tank 75L * Reinforced front axle * Reinforced suspension and stabilizers * Central locking with keyless start * Multifunction display "Plus" * Rear window and interior mirror with dimming function * Storage package 2 * Lockable, illuminated glove compartment * Preparation for We Connect & We Connect Plus * Electrically adjustable and heated exterior mirrors * Multifunction steering wheel * Driver's seat "ergoComfort" * Reinforced AGM battery and generator * Fabric upholstery "Austin" * Fog lights with cornering lights * Battery switch * Electrical connection rail Safety: * Summer tires * Front airbags for driver and passenger * Traffic sign recognition * Front Assist * Lane-keeping assist * Hill-start assist * Side marker lights * Electronic immobilizer * Direct tire pressure monitoring system * Tool kit and jack * Daytime running lights * Spare wheel * Driver fatigue detection * Emergency call system "eCall" * Start-stop system * Electric parking and emergency brake * Reverse warning sound * Preparation for reversing camera * Extended exterior mirrors Platform: * Aluminum frame with screen-printed floor * Aluminum side panels, completely removable * Tie-down points in the floor * 2 small storage boxes under the platform * Cab protection with ladder rack * Side underrun protection * Wheel arch protection with mud flaps * Trailer coupling up to 3.5t trailer load (trailer coupling ball head, trailer coupling socket 12V 13-pin) Additional extras related to the platform are available at an extra cost. Note: Please call briefly before your visit – we will ensure that your desired vehicle is on site. If it is not located in Wachtendonk, we will gladly deliver it from our stock. Individual customization of the platform is possible upon request. Your vehicle partner since 1996. Call or email us now – we look forward to hearing from you! No liability for printing and typographical errors. Errors and prior sale reserved. Best regards, Pimenta Automobile

Condition: used, Year of construction: 2013, Overview Njdszi I T Ispfx Am Towi This KOSME Barifill RFC 50-60-10 VKP rinser - filler - capper block, built in 2013, is designed for the rinsing and filling of glass bottles in beverage production lines. The block combines a 50-station single-channel rinser, a 60-valve glass bottle filler with short-tube VKP filling system and a Zalkin CA9 360 NG rotary capping section in one compact stainless steel machine. With approx. 16,000 bottles/hour on 0.75 L and approx. 20,000 bottles/hour on 0.33 L, the block sits in an attractive mid-range capacity class for water, beer, cider, wine and other glass-bottle applications. Integrated foam cleaning supports hygienic operation; the machine is operated via a touchscreen HMI on an articulated suspension arm and is enclosed in transparent protective safety guarding with safety interlocks. The machine is still installed and under power and underwent extensive maintenance in Q4/2025. Please note: the Zalkin capping heads are not included in the sale price - the capper base machine is included; the 10 capping heads are optionally available. Technical data - Manufacturer: KOSME S.r.l. - Model: Barifill RFC 50-60-10 VKP - Year of manufacture: 2013 - Machine type: rinser - filler - capper block for glass bottles - Filling system: short-tube VKP, 60 filling valves, 113 mm pitch - Rinser: 50 stations, single-channel, 113 mm pitch - Capper: Zalkin CA9 360 NG (2013), 10 capping positions, approx. 22,000 bottles/hour (capping heads not included in the sale price, optionally available) - Capacity: approx. 16,000 bph at 0.75 L / approx. 20,000 bph at 0.33 L - Foam cleaning: integrated - Control: touchscreen HMI on articulated suspension arm - Electrical supply: 400 V, 50 Hz, 17 kW installed power, 38 A - Compressed air: 6 bar, approx. 450 Nl/min - Water: 4 bar, approx. 3.5 m³/h - Machine weight: approx. 10,500 kg Equipment - KOSME Barifill RFC 50-60-10 VKP main machine - 50-station single-channel rinser - 60-valve glass bottle filler, short-tube VKP filling system - Integrated foam cleaning - Zalkin CA9 360 NG capper base machine - Touchscreen HMI on articulated suspension arm - Stainless steel machine frame with transparent protective guarding and safety interlocks - Process piping, vacuum / air equipment, stainless steel bottle handling - Layout drawing available - Optionally available (not included in the sale price): Zalkin capping heads Condition Used - installed in an industrial production environment and still under power. The machine underwent extensive maintenance in Q4/2025 and can be visited and inspected in operation on request. Availability From November 2026 (week 45). Location: Germany.

Condition: used, Kolb radial drilling machine MK 5 boom 1500 mm with clamping table Njdpfsulz Iwsx Am Towi

Condition: used, Vötsch Type: NTUD 125/130/125 Pass-through oven Last maintenance: 3.12.25 Temperature control in 3 zones: Control of the internal temperature via an electronic temperature control system, divided into 3 separate temperature zones and controlled by semiconductor switching devices. This ensures good temperature uniformity whether operating in fresh or recirculated air mode. Nwsdpjy H Akrefx Am Tji Temperature program control: The CTC control system is operated via a dialog PC with TSI software for the heating control of each temperature zone, as well as the activation of the recirculation fans and damper control. Horizontal airflow with reversal: By switching the electronically or pneumatically actuated dampers, the airflow direction can be set from left to right or right to left. The airflow direction for each of the 3 zones can be independently adjusted. Vertical airflow: By shifting a cover plate in the oven ceiling. Useful floor area: The floor area can be driven on using customer-provided loading trolleys. Recirculation fans: Each zone is equipped with a radial fan. Usable space dimensions: 1300 mm height / 1250 mm width / 1250 mm depth External dimensions: 2490 mm height / 1770 mm width / 1810 mm depth Volume: 2000 liters Connection rating: 400V(N)PE AC 50/60 Hz 22 kVA Rated current: 32 A Power: 18 kW Nominal temperature: 50 to 150°C Weight: 1000 kg Condition: used Scope of delivery: (See photo) (Specifications and data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: excellent (used), CTS Type: TSS-70/350-A Water-cooled cooling unit For sale is a high-quality temperature shock testing chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. The unit is used for carrying out temperature shock tests and is typically used in industry, research, and quality assurance. Nedpfey Hkgbjx Am Tswi Application areas: Material testing Aging tests Electronics and component testing Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/350-A Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Equipment / Features: CTS control panel with touch display Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display 2-zone system (hot and cold chamber) Automatic moving platform for shock tests Technical design: Hot and cold chambers are separate Moving platform system for rapid temperature changes Test chamber made of stainless steel Insert shelf / grating Viewing window in the door Water cooling connections available Control cabinet integrated Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your security as a buyer, the following information is provided! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: see pictures (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Nedjy Hkd Hopfx Am Tswi Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Weiss Type: WK 27'/50-150 Climatic Test Chamber Water-cooled Technical Data: Test Chamber Designation: WK 27'/50-150 External Dimensions Height 3500 mm, Width 3400 mm, Depth 6000 mm Control Cabinet Dimensions Height 2000 mm, Width 2400 mm, Depth 400 mm Internal Dimensions Height 3000 mm, Width 3000 mm, Depth 3000 mm Floor load capacity: 30,000 N/m³ (surface load) Test chamber volume: approx. 27,000 liters Specimen mass: 1000 kg Cooling / Heating Operation -50°C to 150°C Heating rate: 1.0 K/min Cooling rate: 1.0 K/min Temperature stability: ±0.3 to 1.0 K (over time) Temperature stability: ±0.1 to 0.5 K (over time) Climatic Operation 10 to 90°C Humidity: 10...98% rH Temperature stability: ±0.1 to 0.5 K (over time) Dew point range: +4 to +84°C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Nsdpfx Amezizhfo Towi Refrigerants: R23 and R404A Equipped with extra floor plates to increase floor load capacity Important safety information for buyers: The following steps are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in the technical data and specifications!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2008, operating hours: 12,100 h, lifting height: 4,500 mm, fuel type: gas, mast type: duplex, color: yellow, BAUMANN sideloader Year of manufacture: 2008 12,100 operating hours Nwodpezl Trhefx Am Tji Fork spread adjustment New tires Lifting height: 4.5 meters Maximum load capacity: 5,000 kg Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Condition: good (used), Year of construction: 1996, machine/vehicle number: 54634, functionality: fully functional, operating hours: 51,997 h, power: 10 kW (13.60 HP), input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 500 kg, total height: 2,400 mm, total length: 2,600 mm, total width: 1,800 mm, overall weight: 3,500 kg, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, mount diameter: 40 mm, rapid traverse Z-axis: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, spindle speed (max.): 15,000 rpm, spindle speed (min.): 10 rpm, Equipment: documentation/manual, 5-axis machining center, manufacturer: DECKEL MAHO, type: DMU 50 V, year of manufacture: 1996, operating hours (h): 51,977, serial no.: 054 634, travels (X/Y/Z): 500/380/380 mm, machine on 21,341, max. spindle speed 15,000 rpm, tool holder SK40, Heidenhain control, chip conveyor, 24-fold tool changer, compact filter system INTERLIT SK200-760, year of manufacture: 21,341, max. spindle speed 15,000 rpm, tool holder SK40, Heidenhain control, chip conveyor, 24-fold tool changer, compact filter system INTERLIT SK200-760, year of manufacture: 1996, tank capacity 600 l, filter area 0.2 m² Nwsdpfxorkzyao Am Toi

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, total height: 2,755 mm, total width: 3,565 mm, table load: 300 kg, overall weight: 4,650 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 32,000 W, number of slots in tool magazine: 60, product length (max.): 3,765 mm, number of axes: 5, This 5-axis DMG MORI DMU 50 3rd gen was manufactured in 2017. It features impressive axis travels of 650 x 520 x 475 mm and a maximum spindle speed of 15,000 rpm. The machine includes a tool magazine capacity of 60 positions and a robust table diameter of 630 mm. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 50 3rd gen vertical machining centre we have for sale. Contact us for further details. • B-axis travel: -35° / +110° • C-axis travel: ±360° • Table diameter: 630 mm • Machine working footprint: approx. 7.0 x 5.75 x 2.76 m • Transport dimensions (L x W x H) – Machine: 3.765 x 3.565 x 2.755 m • Operating hours: 42,253 hours (under power) / 21,241 hours (spindle cutting time) Additional equipment • Heidenhain TS 649 tool probe • Blum laser tool measurement system Njdpozmf R Esfx Am Tswi • Vises • Chip conveyor (transport dimensions: 3.2 x 1.396 x 1.29 m) • Internal cooling system/unit (transport dimensions: 1.525 x 1.205 x 1.6 m) Technical Specification Taper Size SK 40

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake nozzle: 300 mm Engine rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volumetric flow rate: 6000 m³/h Nominal volumetric flow rate: 5,089 m³/h Negative pressure: 2,587 Pa Filter area: 30 m² Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817 Nsdpfx Amoh D If Ho Tjwi Briquetting capacity: 30 - 50 kg/h Briquet diameter: 50 mm Weight: 1570 kg Machine is brand new and in stock at our warehouse. - AVAILABLE IMMEDIATELY - Subject to prior sale Location: 54634 Bitburg

Condition: new, Wilo MHI403-1/E/3-400-50-2/B pump, serial number: 4024295, unused, 100% functional, scope of supply as shown in the photos. Nwedpfx Amozkda He Toi

Condition: used, Year of construction: 2013, lifting height: 5,370 mm, fuel type: electric, mast type: triplex, battery manufacturer: MIDAC, battery capacity: 1,000 Ah, battery voltage: 24 V, fork length: 100 mm, Empty weight: 3.075 kg Battery: 1.000 Ah, 24 V, Year of manufacture 2022, Brand of battery MIDAC Lifting capacity: 1.500 kg Nodpfxjzlitus Am Tewi Fork carriage: Sideshifter Please contact Theo Lelie for more information

Condition: excellent (used), mileage: 5,000 km, power: 50 kW (67.98 HP), first registration: 09/2024, fuel type: electric, fuel: electricity, color: silver, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2024, Number of doors: 5 Cab: single Technical condition: very good Optical condition: very good Nwsdpfx Amjzlhwxs Tsi Damages: none Warranty: none

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1091950, SPECIFICATION Travel X axis stroke 1626mm Y axis stroke 813mm Z axis stroke 762mm Spindle nose to table (max) 889mm Spindle nose to table (min) 127mm Table Length 1626mm Width 711mm T Slot width 16mm T Slot centre distance 125mm Number of Std T slots 5 Max. Weight on table 1814kg Nsdpfx Amet Dmmvs Tjwi Spindle Maximum rating 22.4kW Maximum speed 7500rpm Maximum torque 610Nm at 500rpm Drive system 2 speed geared head Taper BT50 Bearing lubrication Air/Oil injection Cooling Liquid cooled Feedrate Rapids on X 13.7m/min Rapids Y 15.2m/min Rapids on Z 15.2m/min Max. Cutting feedrate 12.7m/min Axis Motor Max. thrust X 24910N Max. thrust Y 24910N Max. thrust Z 24910N Toolchanger Capacity 30 Maximum tool diameter (adjacent empty) 254mm Maximum tool diameter (full) 102mm Maximum tool length (from gage line 406mm Maximum tool weight 13.6kg Tool to tool (avg) 4.2 sec Chip-to-chip (avg) 6.3 sec General Air required 113l/min, 6.9 bar Weight 10,206Kg MACHINE EQUIPPED WITH:- Through spindle coolant Swarf auger Rigid tapping Hard drive Lighting Enclosed Guarding

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11045522744, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 40 kVA, torque: 1,100 Nm, controller manufacturer: HEIDENHAIN, controller model: MILLPLUS, workpiece weight (max.): 330 kg, total height: 2,500 mm, total length: 3,500 mm, total width: 2,400 mm, table width: 380 mm, table length: 500 mm, overall weight: 7,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 32, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, DECKEL MAHO DMU 50 EVOLUTION Universal Machining Center Njdpfxszlgnvj Am Tewi - Operating hours: see photos - Tool holder: SK 40 - Resolution of the measuring system X/Y/Z: 0.001 mm - Positioning tolerance: 0.010 mm - Max. tool length from spindle nose: 280 mm - Max. tool weight with automatic tool changer: 6 kg - Max. total tool weight in the magazine: 90 kg - NC rotary table with swivel axis, clamping surface: 500 x 380 mm - Distance of T-slots/size: 63/4 H 7 mm - Centering bore diameter: 30 H 6 mm - Max. revolutions of the table top (rotary axis): 33 rpm - Max. swiveling torque: 1400 Nm - Swiveling speed: 26 rpm Attention: The item must be picked up between October 7th and October 14th, 2026, on a date to be agreed upon. FCA D-35576 Wetzlar - loaded onto a truck.

Condition: good (used), mileage: 801,813 km, power: 266 kW (361.66 HP), first registration: 01/2015, fuel type: diesel, tire size: 315 / 70 / R22.5, axle configuration: 4x2, wheelbase: 5,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 10,000 mm, total width: 2,600 mm, total height: 3,650 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, soot filter, spoiler, tail-lift, Technical information Number of cylinders: 5 Engine capacity: 9.291 cc Transmission Transmission: Scania, 12 gears, Automatic Axle configuration Tyre size: 315 / 70 / R22.5 Make axles: Scania Brakes: disc brakes Nwedpfx Amozlctho Tsi Front axle: Max. axle load: 7500 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle: Double wheels; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 11.285 kg Carrying capacity: 7.715 kg GVW: 19.000 kg Functional Tail lift: Dhollandia DHSV.20, slider lift, 2000 kg Interior Interior: grey History Number of owners: 1 Condition Technical condition: good Visual appearance: good Number of keys: 2 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Aluminium fuel tank - Armrest - Baggage cover - Car kit - Low-noise - Particulate filter - Radio, MP3 enabled - Radio/CD player - Speed limiter - Spoilers - Stability control - Visor

Condition: used, axle configuration: > 3 axles, first registration: 09/2010, loading space length: 9,030 mm, loading space width: 2,540 mm, loading space height: 820 mm, total length: 13,850 mm, total width: 2,540 mm, suspension: air, tire size: 205/65R17.5, wheelbase: 8,630 mm, color: red, Year of construction: 2010, Equipment: ABS, Nooteboom MCO-50-04V 4 x steering axles. BPW axles. Remote steering with cable. Nwjdjyf A Srspfx Am Tei 95 cm coupling height. Total length extended: 26.53 m. Loading bed: 903 cm + 650 cm + 650 cm. Loading height (loaded): 82.5 cm. = Further Information = Axle configuration Tire size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tires; Steered; Tire tread depth left inside: 40%; Tire tread depth left outside: 40%; Tire tread depth right inside: 40%; Tire tread depth right outside: 40% Rear axle 2: Dual tires; Steered; Tire tread depth left inside: 40%; Tire tread depth left outside: 40%; Tire tread depth right inside: 40%; Tire tread depth right outside: 40% Rear axle 3: Dual tires; Steered; Tire tread depth left inside: 50%; Tire tread depth left outside: 50%; Tire tread depth right inside: 50%; Tire tread depth right outside: 50% Rear axle 4: Dual tires; Steered; Tire tread depth left inside: 50%; Tire tread depth left outside: 50%; Tire tread depth right inside: 50%; Tire tread depth right outside: 50% Weights Unladen weight: 14,960 kg Payload: 33,440 kg GVWR: 48,400 kg Maintenance APK (Technical Main Inspection): valid until 10.2026 Identification Model number: MCO-50-04V / 25MTR / 2X EXTENDAB = Company Information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki) We make every effort to provide accurate information; however, no rights can be derived from the information provided.

Condition: ready for operation (used), Year of construction: 2001, Available immediately ex-works: 5-axis machining center Deckel Maho Type DMU 50 M Year of manufacture 2001 Control system Heidenhain TNC 124 5 axes (3 plus 2) Manual rotary axes with B and C swiveling rotary table Axes B and C are displayed in the control system Nwedpsznk A Ajfx Am Toi Table 700 x 500 mm Travel ranges X/Y/Z 500 /400/400 mm Table load 200 kg Spindle SK 40 Spindle speeds 20 – 4500 rpm Drive power 9 / 13 kW Rotational range C 360 degrees Swiveling range +95 / -10 degrees Feed rate up to 5000 mm/min Spindle speeds 20 – 4500 rpm Weight 3 tons Coolant system Price: Euro 5,500.00 plus VAT, ex-works.