Used Matsuura Hplus 300 for sale (49)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,756 h, functionality: fully functional, machine/vehicle number: 16252, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: FANUC 30i, workpiece weight (max.): 250 kg, TECHNICAL DETAILS Travel X-axis travel: 500 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Work Table Pallet size: 300 x 300 mm Max. workpiece weight: 250 kg Rotary table: 360° x 0.001° Minimum/maximum spindle to table center distance: 120/620 mm Cpsdjxnwy Ijpfx Abueu Minimum/maximum spindle to table surface distance: 80/580 mm Max. workpiece size: 500 x 500 mm Spindle speeds: 50 - 15,000 rpm Spindle taper: ISO 40 Spindle drive power: 15/7.5 kW Feed rates X/Y/Z: 1 - 50,000 mm/min Rapid traverse: 50 m/min Rapid traverse B-axis: 33.3 rpm MACHINE DETAILS Control: FANUC 30i Total connected load: 38 kVA Weight: 10,000 kg Operating Hours Running time: 15,756 h Control on-time: 116,776 h

Condition: good (used), Year of construction: 2013, operating hours: 17,904 h, functionality: fully functional, machine/vehicle number: 19261, travel distance X-axis: 500 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 71, Geometry protocol available TECHNICAL DETAILS Control: Fanuc 30iM X travel: 500 mm Y travel: 560 mm Z travel: 500 mm Spindle-to-table distance: 80 - 640 mm Spindle Speed: 15,000 rpm Power: 15 kW Torque: 119 Nm at 1,200 rpm Tool holder: BT40 Spindle bearing inner diameter: 70 mm Spindle speed command: 5-digit direct S command Spindle alignment: electric Tool clamping force: 11.8 kN NC rotary table B-axis: 0.001° Pallet size: 300 x 300 mm Table load (max.): 250 kg Workpiece size (max.): Ø530 x 760 mm Pallet clamping surface: (M12 x P1.75) x 32 Feed rate Rapid traverse speed (X/Y/Z): 60,000 mm/min Feed rate (X/Y/Z): 1 – 60,000 mm/min Jog feed rate (X/Y/Z): 0 – 4,000 mm/min Min. travel increment (X/Y/Z): 0.001 mm Min. travel increment B-axis: 1 degree Tool magazine Number of tool positions: 71 stations Max. tool diameter (with adjacent tools): 90 mm Max. tool diameter (without adjacent tools): 150 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool selection: Fixed address system Tool change arm: W-gripper type Tool-to-tool change time: Dependent on tool weight Tool change time: Chip-to-chip Target value dependent Tool station spacing: 95.25 mm Automatic pallet changer (PC2) Number of pallets: 2 Change method: Rotary table Pallet change time (pallet-to-pallet): 6.5 s Total pallet change time: 7.0 s Pallet clamping force: 41.5 kN Max. pallet weight: 40 kg MACHINE DETAILS Machine height: 2,683 mm Footprint (not including maintenance area): 2,145 x 3,655 mm Machine weight: 8,300 kg Power supply: 50 kVA On-time: 51,149 h Program run: 30,722 h Machining time: 17,904 h Workpiece counter: 1,389 pieces Cpsdpfx Abewm D Irsuju EQUIPMENT - Chip management with Chip conveyor - Coolant system with paper belt filter and 70 bar high-pressure internal cooling (ICS) - Workpiece measurement with Renishaw OMP60 touch probe - Tactile tool breakage monitoring - 2-station pallet changer - Transformer - Flushing gun

Condition: good (used), Year of construction: 2004, functionality: fully functional, Model Year: 2004 Width: 500 mm Length: 500 mm Height: 500 mm Number of Axes: 4 Tool Holder: BT40 Spindle Speed (RPM): 15,000 Cpodpfx Abjx Tzn Nsueu Processable Material Types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: used, Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, workpiece weight (max.): 400 kg, total height: 2,640 mm, total length: 5,870 mm, total width: 3,440 mm, table width: 500 mm, table length: 500 mm, rotational speed (min.): 15,000 rpm, overall weight: 11,300 kg, Equipment: documentation/manual, Horizontal machining centre CNC Control Matsuura G-tech 16i Pallet table size 500x500 mm Movement X-Y-Z-Axis 600x600x600 mm Magazin capacity 240 Number of pallets: 6 Table load 400 kg Spindle speed 15000 R/min Csdeydddmepfx Abuepu If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, number of axes: 4, This 4-axis Matsuura H plus 405 was manufactured in 2004. It features a pallet size of 500 × 500 mm, X/Y/Z-axis travel of 600 mm each, and a B-axis indexed at 1°. The spindle operates at 12,000 rpm with an ISO 40 taper. It includes a high-capacity tool magazine for 240 tools and supports 24 pallets with dual loading/unloading stations. Consider the opportunity to buy this Matsuura H plus 405 horizontal machining centre. Contact us for more information. Cpodpfx Asx Utv Uobuou • Pallet size: 500 × 500 mm • Number of pallets: 24 pallets • Loading/unloading stations: 2 • Tool magazine capacity: 240 tools • Probing system: Yes (touch probe) • Tool presetting: Yes • Tool breakage detection: Laser system • Spindle taper: ISO 40 (DIN 69871) • Spindle speed: 12000 rpm • High-pressure coolant: 50 bar with paper filter • Machine condition: Available for any test / under power

Condition: good (used), Year of construction: 2003, Machining center Manufacturer: Matsuura Model: H Plus 405 PC6 Year of manufacture: 2003 CNC control: Fanuc G-Tech 16i Travel X/Y/Z: 600 x 600 x 600 mm Cpjdpfxjltlx Ne Abueu Table size: 500 x 500 mm 6-pallet changer Tool magazine: 120 stations 4th axis Knoll high-pressure unit Internal coolant 70 bar 3226ä

Condition: good (used), Year of construction: 2008, functionality: fully functional, Year of manufacture: 2008 Width: 600 Length: 600 Height: 600 Number of axes: 4 Holder: SK40 Spindle speed (rpm): 15,000 Processable material types: Steel, Aluminium, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek Cedpfx Abjx Tzmxjuepu

Condition: good (used), Year of construction: 2004, functionality: fully functional, Year of manufacture: 2004 Width: 600 Length: 600 Height: 600 Number of axes: 4 Cpodpfx Aox Tzafobuou Tool holder: SK40 Spindle speed (RPM): 15,000 Processable materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: good (used), Year of construction: 2015, Traverses X Y Z; 630 x 560 x 510mm, A axis -125/+ 10 degrees, C axis 0.001 degrees, table size 300mm diameter, Maximum diameter 520mm, maximum workpiece height 350mm, Cpjdpfxeyfv Dhj Abuou spindle taper BT40, 90 station ATC, spindle speed 20,000rpm, Fanuc G-Tech 31I control, through spindle coolant and swarf conveyor, spindle probe.

Condition: used, Year of construction: 2017, travel distance X-axis: 435 mm, travel distance Y-axis: 465 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 80 kg, total height: 2,755 mm, total length: 3,360 mm, total width: 3,870 mm, overall weight: 8,500 kg, spindle nose: MAS BBT 40, 5-axis Vertical Machining Centre CNC Control Matsuura G-Tech 31 i Table size ø 130 mm Table load 80 kg Csdsygw Dxepfx Abujpu Number of pallets 10 max workpiece dia x height 330 x 300 mm Movement X-axis 435 mm Movement Y-axis 465 mm Movement Z-axis 560 mm C-axis (table rotation) 360° A-axis (table tilt) -125/+10° Spindle speed 50 - 15.000 R/min Spindle taper MAS BBT 40 Spindle motor 7,5/5,5 kW Magazin capacity 90 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2007, functionality: fully functional, MATSUURA MAM72-25 5 AXIS PALLET CHANGE MACHINING CENTER G -TECH 30i CONTROL 15 K SPINDLE RENISHAW SPINDLE PROBE SUPLIED WITH 4 PALLETS Cjdjx U D U Ijpfx Abuepu LANG VICES AND ZEROPIONT BASES . 3 JAW CHUCK AND COLLETS 15 BT40 TOOLS

Condition: used, Year of construction: 2006, functionality: fully functional, MATSUURA MAM72-35V 5 AXIS 32 PALLET MACHINING CENTER Cjdpfxex U D Two Abuopu G-TECH 16i CONTROL 2006 MACHINE Supplied with 20 BT 40 tools and 5 pallets 15 k Spindle . £65k plus vat.

Condition: ready for operation (used), Year of construction: 2019, total height: 2,050 mm, overall weight: 4,500 kg, travel distance X-axis: 260 mm, travel distance Y-axis: 260 mm, travel distance Z-axis: 100 mm, number of axes: 3, This 3s Matsuura Lumex Avance 25 hybrid metal printer was manufactured in 2019. It features a hybrid system combining metal laser sintering and high-speed milling, with a maximum workpiece size of 250 × 250 mm and a table load capacity of 90 kg. The spindle speed ranges from 450 to 45,000 rpm, accommodating a tool magazine of 20 tools. Consider the opportunity to buy this Matsuura Lumex Avance 25 metal 3D printer. Contact us for further details. • Working hours: 2,000 h • Technology: Hybrid system (metal laser sintering + high-speed milling on a single platform) • Laser type: Yb fiber laser • Laser power: up to 400 W • Layer thickness: 0.05 mm • Build/work area: • Max workpiece size: 250 × 250 mm • Table size: 270 × 270 mm • Axes/travels: • U-axis (sintering table): 185 mm Cedpfx Abeyhcxkjuopu • W-axis (powder blade): 522 mm • Spindle (milling): • Tool holder: BT20 (special Matsuura taper) • Tool magazine: 20 tools • Accuracy: • Positioning accuracy (X/Y/Z): ±0.0025 mm • Repeatability (X/Y/Z): ±0.001 mm • Materials (typical): Tool steels, maraging steel; stainless steels (e.g., 316L, 630); titanium alloys (Ti‑6Al‑4V, Ti‑6Al‑7Nb) • Machine data: • Power supply: AC 200/220 V, 50/60 Hz • Installed power: approx. 39 kVA • Inert gas: Nitrogen / Argon

Condition: ready for operation (used), Year of construction: 2004, operating hours: 53,875 h, spindle speed (max.): 15,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller manufacturer: MATSUURA, controller model: G-Tech 30i, number of slots in tool magazine: 240, number of axes: 5, This 5-axis Matsuura MAM72-25v was manufactured in 2004. It features X-travel of 550mm, Y-travel of 410mm, and Z-travel of 450mm. The spindle operates up to 12,000rpm with a BT40 taper and has a tool storage capacity of 240 pieces. Consider the opportunity to buy this Matsuura MAM72-25v universal machining centre. Contact us for more information about this machine. • B-axis travel: -110° to +110° • C-axis travel: 360° • Pallet working surface: 130 mm diameter • Max. workpiece size: 250 mm diameter x 250 mm height • After maintenance on the spindle the machine is limited to 12,000 rpm Additional equipment • BMO Titanium 50 robot cell (YOM 2016), available for an additional €30,000 • Includes: 1 zero-point clamping system and 1 long clamp Codpfeyf Hphjx Abujpu Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 1990, travel distance X-axis: 510 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 460 mm, total height: 2,620 mm, overall weight: 3,800 kg, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 20, product length (max.): 2,800 mm, number of axes: 3, This 3-axis Matsuura MC-510V was manufactured in 1990. It features a spindle speed of 60-6000rpm, a BT40 spindle taper, and a 20-tool capacity. The machine dimensions include a 380x760mm table work area and a substantial weight of 3800kg. If you are looking to get high-quality milling capabilities, consider the Matsuura MC-510V machine we have for sale. Contact us for more information about this machine. • Table work area: 380 x 760 mm Cedpjyfwadefx Abuspu Technical Specification Taper Size BT 40

Condition: used, x-travel 760 mm y-travel 410 mm z-travel 500 mm Cpsdpjxxb I Dsfx Abueu

Year of construction: 2005, condition: used, Empty weight: 10.000 kg Dimensions (LxBxH): 220 x 270 x 250 cm Price: On request Lots of accessories! Includes - probe Includes - 3 vices - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 16286 - Drive system: CNC - Power [kW]: 22.0 - Number of axes [pcs]: 2 - X-axis travel [mm]: 550 - Y-axis travel [mm]: 410 Cpodpfx Abjxdc Szsueu - Z-axis travel [mm]: 460 - Table length [mm]: 860 - Table width [mm]: 400 - Tool holder: BT40 - Max. spindle speed [rpm]: 15000 - Options: Probe - Transport dimensions: 2200mm x 2700mm x 2500mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1993, 2 pallet changers and 4th axis Year of manufacture: 1993 X-travel: 1,020 mm Y-travel: 560 mm Z-travel: 400 mm Table-to-spindle distance: 550 mm Control: Yasnac M80 Table size: 1,200 x 660 mm 2 pallets: 1 pallet with 2 Chick clamps – 1 pallet with 4th axis Tsudakoma RNCV201 Table load: 600 kg Tool holder: SK 40 Rapid traverse X-Y axes: 25,000 mm/min Rapid traverse Z: 15,000 mm/min Spindle speed: 200–20,000 rpm Motor power: 11/15 kW Tool magazine: 40 Internal coolant supply: 20 bar Cpedpfewxbg Aex Abuou Coolant tank Timer Scraper conveyor Renishaw probe Spindle cooler Air cooler Electronic handwheel Machine weight: 9 t Required space: approx. 7 m x 4.5 m x 2.85 m Total power requirement: 40 kVA

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power pack, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit -Manufacturer: Fanuc, Velocity Control Unit from machining center Matsuura MS-710 V -Type: A06B-6035- H315 H316 -Dimensions: 500/250/H160 mm Cedpfohtn R Tsx Abuopu -Weight: 8.4 kg

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power pack, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit -Manufacturer: Fanuc, Velocity Control Unit from machining center Matsuura MS-710 V -Type: A06B-6035- H422 H423 -Number: 2x servo module available Cpedpfx Ashtryisbueu -Price per piece -Dimensions: 500/260/H155 mm -Weight: 6.6 kg

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Permitted workpiece weight: 1000 kg Strokes: X1050 Y510 Z560 Rapid feed X/Y: 12000 mm/min Rapid feed Z: 10000 mm/min Main spindle motor: 11 kW Video of machine in operation available Cpsdpeydl E Eefx Abueu

Condition: ready for operation (used), Year of construction: 2006, operating hours: 19,911 h, controller manufacturer: FANUC, controller model: 30 iM, total height: 2,250 mm, spindle speed (max.): 15,000 rpm, This 5-axis Matsuura MAM72-25V was manufactured in 2006. Ideal for complex and precise machining tasks, this vertical machining center offers enhanced flexibility and productivity for your manufacturing needs. Consider the opportunity to buy this Matsuura MAM72-25V vertical machining center. Contact us for more information. Additional equipment • Tool changer with 40 stations (chain) • Pallet changer for 2 pallets, 130 mm diameter • Replacement pallets Capto C6 • KNOLL coolant system with coolant supply through the spindle and pump KTS25-50T / Coolant shower with a capacity of 100 l/min at 1.4 bar • 2 spiral chip conveyors • Renishaw measuring probe OMP60 / Renishaw laser system TRS-1 • Rotating viewing window, electric / For the control: programmable mirror, coordinate system rotation, IZ2/150NF HSC precision control for simultaneous 5-axis machining • CE mark Machine Benefits Cpedpfx Asx D Shrsbusu Technical Machine Benefits • Direct position measuring system via rotary encoder for b and c axes • Spindle and spindle motor were last replaced in 2018 Dimensions Machine Depth 2200 mm

Year of construction: 2004, condition: good (used), Traverses X Y Z; 680 x 394 x 625mm, B axis -110/+ 65 degrees, C axis 0.001 degrees, pallet diameter 130mm, maximum workpiece diameter 300mm, maximum workpiece height 250mm, number of pallets 40, spindle taper BT40, 240 Station ATC, spindle speed 12000rpm, Fanuc G-Tech 16I control, through spindle coolant, and swarf conveyor. Codpfom H Uyzex Abuopu

Condition: ready for operation (used), Year of construction: 2003, Movement X-Axis Movement 800 mm Y-Axis Movement 550 mm Z-Axis Movement 550 mm This 3-axis Matsuura V.PLUS-800 was manufactured in 2003. It features a spacious table of 1150mm x 550mm with a loading capacity of 500kg, and a robust spindle speed ranging from 40 to 12,000 RPM. Ideal for precise and heavy-duty machining. If you are looking to get high-quality milling capabilities, consider the Matsuura V.PLUS-800 machine we have for sale. Contact us for more information. Cpjdpfx Abex D I D Nousu Application Types Milling

Condition: used, functionality: fully functional, 4 pieces of Matsuura H-Plus 630 machine pallets, 800 x 800 mm, with hydraulic feed Csdpfx Ajxn R Sksbuopu