Used Mazak for sale (299)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 172087, turning diameter: 660 mm, spindle bore: 76 mm, spindle speed (max.): 5,000 rpm, controller model: MAZATROL Fusion 640 MT, spindle torque (max.): 349 Nm, TECHNICAL DETAILS Maximum turning diameter: 660 mm Cgjdpfx Ahjzgufreqow Main spindle Speed range: 35–5,000 rpm Power (10 min / continuous operation): 22 / 15 kW Maximum torque: 349 Nm Spindle bore: 76 mm Chuck diameter: 210 mm C-axis indexing: 0.0001° Sub-spindle Speed range: 35–5,000 rpm Power (10 min / continuous operation): 18.5 / 15 kW Maximum torque: 326 Nm Chuck diameter: 210 mm C-axis indexing: 0.0001° Cooling Coolant tank volume: 300 l Pump capacity: 20 l/min Pump pressure: 5 bar Compressed air requirement: 5 bar, 500 l/min MACHINE DETAILS Control model: MAZATROL Fusion 640 MT Total power consumption: 66 kVA Operating voltage: 400 V / 50 Hz EQUIPMENT Technical documentation Chip conveyor with cooling system 20-position tool magazine B-axis (positioning in 0.001° increments) C-axis Y-axis Milling spindle Angular positioning of the sub-spindle Synchronization of main and sub-spindle Tool setting system (Tool Eye) Interlock for the front door Complete cooling system Interface for IC memory card

Condition: used, Year of construction: 2005, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 560 mm, workpiece height (max.): 500 mm, workpiece diameter (max.): 730 mm, workpiece weight (max.): 500 kg, total length: 630 mm, table width: 500 mm, table load: 500 kg, Mazak Variaxis 730-5X Simultaneous 5 axis CNC Vertical Machining Centre Model: Variaxis 730-5X S/No.: 567181684 Year: 2005 Country of Origin: Japan Control: Mazatrol 640M 5X ‘X’ axis Travel: 730mm ‘Y’ axis Travel: 850mm ‘Z’ axis Travel: 560mm ‘A’ axis: -120 degrees tp+30 degrees ‘C’ axis: continuous 360 degrees Table Size: 630 x 500mm Max. Table Load: 500 kgs Max. workpiece dia.: 730mm approx. Cgodpfezhl Erjx Ahqsw Spindle Taper: ISO 50 Spindle Speed: 10,000 RPM

Condition: used, YOM 2004 Mazatrol PC Fusion 640 M Axis X 1660 mm Axis Y 510 mm Axis Z 510 mm Table length 2000 mm Table width 510 mm Cgjdpov Ax Uyofx Ahqow Max. part weight 1000 kg Number of tool pockets 30 Spindle taper CAT 40 Max. spindle speed 10000 rpm Spindle motor power 18.5 kW

Condition: excellent (used), Mazak Quickturn Nexus 300 CNC Lathe Capacity Maximum bar size diameter - 77mm Maximum cutting dia - 420mm Maximum swing - 680mm Spindle Cgjdszh Ndxopfx Ahqjw Main spindle speed : Max 4,000rpm / Min 35rpm Main spindle workpiece weight ( including chuck) 450kg Spindle bore - 88mm Spindle centre line - 1080mm Spinel nose - A2-8 Axis Travel X axis 225mm Z axis 680mm Cutting feedrates (x axis max) 8m/min (z axis max ) 8m/min Rapid traverse X axis (max) 30m/min Z axis (max) 25m/min Turret Toolsize turning tool shank - 25 x 25 Turret indexing time 1/2 full turn 0.8 secs single step 0.2 secs No of stations on drum turret 12 Tailstock (not chucker) Body movement motor driven Body stroke 645mm Mounting taper No5 Standard centre supplied No5 Chucking systems Chuck cylinder S2078-15Y Chuck Type B210A815X Jaw stroke on diameter 8.8mm Main chuck diameter 10" Mazatrol PC Fusion CNC 640T Nexus CNC Control

Condition: good (used), Year of construction: 2014, Mazatrol Matrix 2 Control, Table Size 500 X 400mm, Table Load 300 Kgs, Codozibazspfx Ahqegw Traverses X Y Z; 350 X 550 X 510mm, Min-Max Distance Spindle to Table 50 -560mm, C Axis 0.0001 Degrees, A Axis -120 ~ +30 Degrees, Spindle Power 22kW, Spindle Speed 12,000 Rpm, 30 Station ATC, Spindle Taper DIN 40, Coolant, Through Spindle Coolant,

Condition: like new (used), Mazak VCN-530C 4 Axis VMC Year 2020, Smooth Control, Csdpjzil A Hefx Ahqsgw Kitagawa 4th Axis with 300mm face plate 1300mm x 550mm table, 1050mm x 510mm x 510mm travels, 12,000rpm spindle, Renishaw probing,

Condition: like new (used), MAZAK INTEGREX i-200 5 Axis Mill Turn Machine Year 2017, Smooth Control Cgjdjzilwwjpfx Ahqow Kitagawa BB08 chuck, SMV power steady. 658mm max machining diameter, 1519mm max turning length Renishaw Probing, swarf conveyor, A-Mist air filtration, FSE coolant filtration.

Condition: used, Year of construction: 2005, Serial Number 177554 YOM 2005 Mazatrol 640m Control EIA & Mazatrol Programming 30 Tool Magazine CAT Tooling 4th Axis Cgedpfx Aszilp Tehqjw Swarf Conveyor Mazak Tool length measuring unit Spindle thru coolant UK Buyers - Price £42,000 +VAT Carriage/delivery is additional

Condition: used, Makatrol Smart Control Serial Number 254702 YOM 2014 EIA & Mazatrol Programming Full Factory 4th Axis Cgedpfx Ahezilpmjqjw 30 Tool Magazine CAT Tooling USB Ports No swarf conveyor or thru coolant UK Buyers - Price £39,000 +VAT Carriage/delivery is additional

Condition: used, Year of construction: 2014, Mazatrol Smart Control Cgedpfxszillho Ahqjw Serial Number 249154 30 Tool Magazine EIA & Mazatrol Programming USB Ports No swarf conveyor No thru coolant UK Buyers - Price £32,000 +VAT Carriage/delivery is additional

Condition: used, Year of construction: 2004, Mazak Integrex E-650H x 2000 CNC Multi-Tasking CNC Lathe. S/No. 168658 (2004) with Mazatrol Fusion 640MT Pro Control, Max Swing 920mm, Spindle Motor 45kW, Rotary Spindle Motor 37 kW, Max Spindle Speed 1600rpm, Spindle Bore 260mm Dia, X/Y/Z Travels 1025/650/2106mm, B-Axis -30deg/+210deg, C-Axis 360deg, Rapids X/Y/Z 40/40/40m/min, Max Rotary Tool Spindle Speed 10,000rpm, Tailstock Travel 1858mm, Tailstock Quill Stroke 160mm, Tailstock Centre MT6, Automatic 80 Position Toolchanger, Spindle Taper Capto C8, Cromar Swarf Conveyor. Country of Origin: Japan Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Location: This lots is located in Birmingham, UK. Please see individual lot for loading information and charges. All/Any tooling is being offered as specifically described. Codjzhmt Dopfx Ahqsgw

Condition: excellent (used), Year of construction: 2019, Table size 3500 x 820 mm, table load 2500 kgs, traverses XYZ 3000 x 800 x 720mm, Rapid federate 50m/min, Spindle power 35Kw, spindle speed 18,000rpm, 30 station ATC, Spindle taper CT40, Mazak Smooth Control, B axis +/- 110 degrees, Cgsdpfx Ajzd Eqaohqew C axis 0.001 degrees, Through spindle coolant, swarf conveyor.

Condition: good (used), Year of construction: 2017, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 12,000 rpm, For sale is a very well-maintained Mazak VCN 530C vertical machining center with a Lehmann 500 Series 4th/5th axis, manufactured in 2017. This machine impresses with its high precision, reliability, and productivity and is ideally suited for both single-part and series production. Cjdpfx Ahezinvcjqsgw Technical data: Control: Mazatrol Smooth G Travel in X-axis: 1050 mm Travel in Y-axis: 530 mm Travel in Z-axis: 510 mm Machine table: 1300 x 550 mm Spindle speed: 35 - 12,000 rpm Spindle: SK40 / DIN 67871A Spindle motor: 18.5 / 11 kW Number of tool positions in the tool magazine: 30 and equipped with, among other things: - Chip conveyor - Coolant supply through the spindle, 15 bar - Renishaw MP60 - Lehmann 4th/5th axis, type 500-Series, T1-510520.LL-TAP2-M14 with Schunk chuck - Lehmann steady rest, type: RST.LIG-80H If you have any questions about the machine or would like to schedule a viewing, please contact us by phone or email. Feel free to browse our other listings to get a complete overview of our inventory.

Condition: used, Various tool holders from Mazak, Sandvik, Mimatic, Gerardi, EWS, Nikken and others. Turning and milling tools with VDI 40 interface. Only for sale per pallet. Pallet 1: EUR 3,220 total 4x driven tool VDI 40 at EUR 580/each 10x tool holder VDI 40 at EUR 90/each Pallet 2: EUR 3,130 total 4x driven tool VDI 40 at EUR 580/each (1x new) 9x tool holder VDI 40 at EUR 90/each Cjdpfx Aovpvmtjhqegw Pallet 3 is sold Pallet 4 is sold

Condition: used, various tool holders from , mazak, sandvik, mimatic, gerardi, ews, nikken and others. turning-milling tools with the VDI 40 holder only for sale per pallet Cedsvry T Nspfx Ahqogw pallet5 euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc pallet 6 euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 7 euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 8 euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc

Condition: used, Year of construction: 2021, operating hours: 3,372 h, travel distance X-axis: 730 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 470 mm, workpiece weight (max.): 200 kg, total height: 2,933 mm, total length: 2,984 mm, total width: 2,300 mm, overall weight: 6,780 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 1,114 h, Equipment: documentation/manual, CNC 5-Axis Vertical Machining Centre CNC Control Mazatrol Smooth X Table size Ø 500 mm Table load 200 kg Number of pallets 1x Max. Workpiece 500x320 mm Movement X-axis 730 mm Movement Y-axis 450 mm Movement Z-axis 470 mm C-Axis (table rotation) 360° B-Axis travel ±110 (220) ° Spindle speed 18.000 R/min Spindle Taper HSK A-63 Spindle motor 15/11 kW Magazin capacity 48 Codpfszf Hyrex Ahqegw If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2012, maximum machining diameter 380mm, maximum machining length 508mm, bar capacity 74mm, spindle speed 4,000rpm, spindle power 18.5Kw, milling speed 4,500rpm, milling power10Kw, Cgodpfx Aezaz Uzjhqew sub-spindle speed 6,000rpm, sub-spindle power 5.5Kw, Y axis -51/+51mm, 12 station turret, Mazatrol Matrix Nexus control, swarf conveyor, parts catcher , tool setter, 3 jaw chuck and Barfeed unit.

Condition: excellent (used), Year of construction: 2011, CNC Lathe with y-axis MAZAK - QTN 250 MY MACH-ID 9483 Make: MAZAK Type: QTN 250 MY Cgodpfsyyxzmjx Ahqsw Control: Mazatrol Matrix Nexus Year: 2011 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2010, Mazak VCN 510C-II (Vertical Center Nexus) With Mazatrol Matrix Nexus control, 12,000 RPM 18.5KW BT40 spindle, with tool setter and swarf conveyor. Due into Bristol in March 2026 when more pictures will be uploaded. Specification: Control System: Mazatrol Matrix Nexus Table Size: 1300 mm x 550 mm Maximum Table Load:1200 kg X-Axis Travel: 1050 mm Y-Axis Travel: 510 mm Z-Axis Travel: 510 mm Cgedpfx Ajyh N Aajhqsw Spindle Speed: 12000 RPM Spindle Taper: BT40 Spindle Motor: 18.5 kW Tool Storage Capacity: 30 tools (Standard) Tool Change Time (Chip-to-Chip): Rapid Traverse (X/Y/Z): 36 m/min Weight: ~ \(6900\) - \(7100\) kg Machine Dimensions 3870 x 2819 x 2842mm Control System: Mazatrol Matrix Nexus Specs: X 1050 Y 510 Z 510 / 12,000RPM / BT40 Accessories: Tool setter and swarf conveyor

Condition: used, Year of construction: 2008, x-travel 1250 mm y-travel 1000 mm z-travel 1000 mm control Matrix max. workpiece diameter 1060 mm workpiece length - max. 1000 mm chucking diameter 800 mm type of pallet-changer 2 St. milling head speed 10000 U/min table turning speeds 500 U/min numbers of tools in magazin 120 tool taper 50 ISO table drive 37 kW milling drive 37 kW Cedpfx Aheywntmsqsgw total power requirement 110 kW weight of the machine ca. 37 t dimensions of the machine ca. 5 x 4 x 3 m Milling and turning machine with 5 axes. Control: Mazatrol Matrix. Machine has coolant through spindle with mist exhaust and is prepared for Renishaw OMP.

Condition: used, Year of construction: 2006, x-travel 1250 mm y-travel 1000 mm Csdpfx Aheywntaeqjgw z-travel 1000 mm control 640MPlus max. workpiece diameter 1060 mm workpiece length - max. 1000 mm chucking diameter 800 mm type of pallet-changer 2 St. milling head speed 10000 U/min table turning speeds 500 U/min numbers of tools in magazin 80 tool taper 50 ISO table drive 37 kW milling drive 37 kW total power requirement 110 kW weight of the machine ca. 36 t dimensions of the machine ca. 5 x 4 x 3 m Milling and turning machine with 5 axes. Control: Mazatrol 640 MPlus. Machine has coolant through spindle with mist exhaust and is prepared for Renishaw OMP.

Condition: good (used), Year of construction: 2004, turning length: 1,000 mm, Manufacturer: MAZAK Type: QTN 250 Control: MAZATROL 640T NEXUS Year of Manufacture: 2004 Specifications Cedpowaiinefx Ahqogw Metric US Standard Max. Turning Diameter 675 mm X-Axis 230 mm Z-Axis 1025 mm Spindle Bore 77 mm Speed 4000 rpm Spindle Power 26 kW Tool Changer 12-Hole Quill Mount 5 Mk Dimensions (Estimate) Length 3800 mm Width 1800 mm Height 2000 mm Weight 5200 kg Please note: The information on this page has been obtained to the best of our knowledge and belief, and where possible, from the manufacturer. The information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: like new (used), Year of construction: 2022, operating hours: 4,747 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, spindle speed (min.): 1 rpm, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, documentation/manual, This machine is in excellent technical condition and is available immediately. Tools and a vise are not included in the scope of delivery. This machine is in excellent technical condition and is available immediately. Tools and a vise are not included in the scope of delivery. Technical data is attached in PDF format. Optional features: Cooling with air through the rotating milling spindle Coolant/air switchable in combination with the optional coolant supply through the spindle High-level production package (LNS left) Includes: Tool length measurement & tool breakage detection Air blow device on the workpiece High-pressure coolant supply through the spindle (15 bar) Flushing system for the cover Chip conveyor, hinge belt, (LNS MH500), ejector on the left Prepared for Mazak Monitoring System B OMP 60 (optical) Synchronized tapping Max. program memory 8 MB Input-constant inclination angle during movement The following options have also been retrofitted: Measuring probe CMP 60 Handwheel Engraving function Csdpfx Ajziz R Hjhqsgw

Condition: ready for operation (used), Year of construction: 2017, operating hours: 67 h, spindle motor power: 22,000 W, spindle speed (max.): 3,300 rpm, travel distance X-axis: 615 mm, travel distance Y-axis: 260 mm, travel distance Z-axis: 1,585 mm, overall weight: 16,600 kg, controller manufacturer: MAZATROL, number of axes: 5, This 5-axis Mazak INTEGREX i-200 S was manufactured in 2017. It features full 5-axis simultaneous machining, a maximum machining diameter of Ø658 mm, and a maximum machining length of 1519 mm. The machine includes a robust tool magazine capacity of 72 positions and is equipped with both main and second spindles for enhanced capabilities. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX i-200 S turn-mill centre. Contact us for further details. • Operating time: Approx. 68 hours • Availability: Immediate • Key capabilities: • Full 5‑axis simultaneous machining • Main spindle + second spindle • Milling spindle with automatic tool changer • Complete turning and milling in one setup • Capacity and working range • Max swing: Ø658 mm • Swing over cross slide: Ø658 mm • Max machining diameter: Ø658 mm • Max machining length: 1519 mm • Bar capacity (main spindle): Ø102 mm • Bar capacity (second spindle): Ø65 mm • Max support mass (main spindle): 650 kg • Max support mass (second spindle): 300 kg • Main spindle (HD1) • Chuck size: 12" • Spindle bore: Ø112 mm • Motor output: 22 / 18.5 kW • Torque: 883.3 / 716.2 Nm • Acceleration time: 4.9 s • Air blow system: Included • Additional configuration: Heavy‑duty HD1 spindle; removal of standard spindle cylinder and chuck • Second spindle (HD2) • Chuck size: 8" • Max speed: 5,000 rpm • Spindle bore: Ø76 mm • Motor output: 18.5 / 15 kW • Torque: 325 / 238 Nm • Acceleration time: 4.5 s • Factory option: HD2 spindle synchronization function • Milling spindle • Max speed: 12,000 rpm • Motor output: 24 kW • Cooling: Oil & air • 90° indexing time: 0.5 s • Acceleration: 1.27 s • Lubrication: Oil & air • Tool capacity: • O.D. turning tools: □25 mm • I.D. turning tools: Ø40 mm • Milling tools: Max Ø125 × 400 mm • Axis travels • W: 1574 mm • Rapid traverse: X/Z 50 m/min; Y 40 m/min; W 30 m/min • Tool system and magazine • Tool system: CAPTO C6 • Tool magazine capacity: 72 positions • Automatic tool changer: Included • Functions: Tool breakage detection in magazine; Overload detection • CNC functions and software • 5‑axis machining function package • Tool radius compensation for 5‑axis • Cylindrical interpolation • Polar coordinate interpolation • Synchronous tapping with milling spindle • Cooling and preparation • Through‑tool coolant: 7 MPa • Preparation for oil mist extraction system • Highlights • Practically new condition with only ~68 operating hours • Very rich factory configuration • Full 5‑axis simultaneous machining • Main and sub‑spindle configuration • 72‑tool CAPTO magazine • Production‑ready with significant savings vs. new Additional equipment • Chip and parts handling • Side chip conveyor – Consep type • Belt‑type parts conveyor • Bar feeding and workpiece handling • LNS QLS II bar feeder • Bar feeder interface kit • Automatic parts catcher • Filtration • SEI FILTRATION unit • Series: JT040 • Model: 40/70‑V‑I‑R‑FM • Year: 2018 • Other accessories • Machine mounting anchors • 3‑color machine status signal lamp Technical Specification Cgjdpfx Ahoy Sltgoqjw Counter Spindle Yes Driven Tools No Taper Size Capto C6

Condition: ready for operation (used), Year of construction: 2012, laser power: 4,000 W, travel distance X-axis: 3,000 mm, number of axes: 3, This 3-axis Mazak Optiplex 3015 was manufactured in 2012. It features a powerful 4 kW resonator and can accommodate a maximum sheet size of 3000 x 1500 mm. If you are looking to get high-quality laser cutting capabilities, consider the Mazak Optiplex 3015 CO2 laser cutting machine we have for sale. Contact us for further details. Csdpfxezh E Aqj Ahqegw • Resonator power: 4 kW • Max sheet size: 3000 x 1500 mm