Used Mep Shark 320 Ax for sale (112)

Condition: new, Motor power 1,1/2,2 kW belt opening 130 mm belt dimensions 350x32x2,5 weight 220 kg Speed 30/60 1/min. Cutting surface 0° 115 / 100 / 130x80 Cutting surface 45° right 100 / 85 / 90x80 Cutting surface 45° left 75 / 75 / 90x65 Cutting surface 60° right Cutting surface 60° left Description Manual crosscut saw for miter cuts from 45° right to 45° left, with high sawing power. Gedpfxecgrkys Aadoin Construction in sturdy cast iron, practical and safe for every cut. FALCON 352 is available in bench version or on stand (accessories). The machine is equipped with a two-speed - three-phase motor. On request, the machine is supplied with pneumatic vice (FALCON 352 MA, when the head is lowered, the vice closes automatically) This version is always supplied with stand. Basic equipment: clutch adjustable from the outside Blocking device with vice Sliding on prismatic guide with adjustable bar Fixed clamping of the vice with axial adjustment for clamping the workpiece in the immediate vicinity of the cutting line. Adjustable fixing of the degasser, made entirely of steel. Electric 48 V coolant pump for cooling and lubrication of the saw blade. Double spring for the return of the to fix the loading platform. The machine can be lifted. Endless worm shaft mounted on pair of bearings. Saw blade holding shaft mounted on off-center punch. 2 speeds 30 and 60 rpm. Vise opening 130 mm Machine is supplied without saw blade. Electrical equipment: Electrical control panel marked cable connections main safety switch provided for padlock Emergency stop device Phase failure protection Speed changeover switch Thermal magnetic protection Undervoltage release Motor with IP 54 protection Low voltage system 24 Volt Electric coolant pump 48 V Motor 1,1/2,2 kW - 400 Volt For further technical data please refer to the attached PDF document.

Condition: new, MEP TIGER 372 CNC LR 4.0 Item number TI372CNCLR motor power 4,0 kW belt opening 190 mm belt dimensions 370x32x3 weight 1.060 Kg Speed 15-150 1/min. Cutting surface 0° 120 / 110 / 180x100 Cutting surface 45° right 115 / 100 / 120x100 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description Electro-mechanical vertical circular saw with semiautomatic function for the use of HSS saw blades to make precision cuts from 45° right to 60° left with multi-micro processors with two controlled axes that allow to program 80 different cutting programs, each with different cutting length and number of pieces, for the same thickness of material Basic equipment: -Saw head slides on recirculating ball linear double guides. -saw head feed with electromechanical cylinder -Rotary axis with thrust bearing -three-stage gearbox -material feeding (length 1000 mm) via recirculating ball screw with stepper motor and movable feeding vice Giodpfochkyrex Aadon -Vice opening 190 mm -Saw head stroke directly programmable from the control panel, for adaptation to the cutting material -Pneumatic vertical vice -Saw blade HSS DMO 5 Æ 370x32x3 for solid and profiled material -chipping brush -The machine is designed for lift truck transport incl. tools and operating instructions Electrical equipment: -control panel -80 different cutting programs programmable -control light for operational readiness -Main safety switch -console for programming and control, LCD display with auto-diagnostics -LED check indicator on the control panel to check the machine functions -Emergency stop button -Speed changeover switch -Thermomagnetic protection -Undervoltage release -Switch handle protection class IP 55 -Low voltage system 24 volts -Electric coolant device for lubrication and cooling of the saw blade (attachment of a micro-spraying device possible) -Motor 4,0 kW - 400 Volt MEP TIGER 372 CNC LR 4.0 RC with automatic miter cutting Item number TI372CNC LR 4.0 RC motor power 4,0 kW bench opening 190 mm belt dimensions 370x32x3 weight 1.060 Kg Speed 15-150 1/min. Cutting surface 0° 120 / 110 / 180x100 Cutting surface 45° right 115 / 100 / 120x100 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description -Automatic electromechanical vertical circular saw for the use of HSS saw blades to perform serial cuts with automatic miter adjustment between -45° to +45° on steel. -Semi-automatic cycle to perform miter cuts between -45° and +60°. -with multi-micro processors with two controlled axes that allow to program 80 different cutting programs, each with different cutting length and number of pieces, on the same material thickness. Basic equipment: -Saw head slides on recirculating ball linear double guides. -saw head feed with electromechanical cylinder -Rotary axis with thrust bearing -three-stage gearbox -material feed (length 1000 mm) via recirculating ball screw with stepping motor -movable feeding vice -vice opening 190 mm -Saw head stroke directly programmable from the control panel, for adaptation to the cutting material -Pneumatic vertical vice -Saw blade HSS DMO 5 Æ 370x32x3 for solid and profiled material -chipping brush Electrical equipment: -control panel -80 different cutting speeds

Condition: new, MEP COBRA 352 MA Article number CB352MA motor power 2,2 kW belt opening 180 mm belt dimensions 350x32x3,4 weight 210 Kg Speed 1700/3400 1/min. Cutting surface 0° 120 / 105 / 180x70 Cutting surface 45° right 120 / 100 / 135x60 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description Manual circular saw for sawing aluminium, mitre cuts from 45° right to 45° left and saw head can be tilted 0°to 45° to the left. On the Cobra 352 MA (automatic vice) the vices close automatically when the saw head is lowered. Basic equipment: -Roller bearing mounted rotary table for fast and precise mitre adjustment. -screw lock to lock the saw head in any angular position -Automatic saw blade lubrication -Clamping system consisting of two vices -Saw head locking in the upper position -Adjustable length stop for cuts of the same length -Vice opening 180 mm -incl. tools and operating instructions Electrical equipment: -control panel -marked cable connections Gijdpfx Aechku Soadsn -indicator light for operational readiness -Main safety switch -emergency stop button -speed changeover switch -thermal magnetic protection -Undervoltage release -Switch handle Protection class IP 55 -low voltage system 24 Volt -Motor 1,5/2,2 kW - 400 Volt For further technical data, please refer to the attached PDF document.

Condition: new, MEP COBRA 352 NC 5.0 [Fully automatic] Article number CB352NC 5.0 motor power 2,6/3,5 kW belt opening 180 mm belt dimensions 350x32x3,4 Weight 600 Kg Giodpfx Aaochkwhedsn Speed 1700/3400 1/min. Cutting surface 0° 120 / 105 / 180x70 Cutting surface 45° right 120 / 100 / 135x60 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description Automatic cross-cut saw with semi-automatic function for sawing aluminium and light alloys. Mitre cuts from 45° right to 45° left and saw head can be tilted 0°-45° to the left. It is controlled by multi-microprocessors, while two NC controlled axes allow to program 1000 different cutting programs, each with a different number of pieces and length, for the same material. -New centralized control panel on an articulated arm, so that the machine can be easily operated from any working position and the emergency stop button can be pressed at any time. -Fieldbus communication system with double microprocessor and serial port. -Display with 20 characters x 4 lines for displaying the following technical parameters: Number of cuts programmed and executed, saw band thickness, feed length, cutting time, ammeter, display of over 100 diagnostic messages and warnings. -New - Display and recording of alarm and error messages with the possibility of displaying the incidents that have occurred. New - Material feed of 600 mm with cutting motor and recirculating ball screw mounted on opposite ball bearings.

Condition: used, Year of construction: 2009, functionality: fully functional, For sale is a used, fully functional semi-automatic miter band saw. Giedpfx Aowigavoaden 0° 330 mm 320 mm 450 x 320 mm + 45° 320 mm 300 mm 300 x 300 mm + 60° 210 mm 200 mm 200 x 200 mm - 45° 320 mm 300 mm 300 x 300 mm - 60° 210 mm 200 mm 200 x 200 mm Max. vise opening 455 mm Blade size 4500 x 34 x 1.1 mm Saw blade motor power 4.0 kW - three-phase Blade speed 15 - 100 m/min Accessories: 4.5 m roller conveyor, various saw blades

Year of construction: 2001, condition: good (used), machine/vehicle number: 129603-40-6, Technical data: Gsdped Aai Tsfx Aadein -Saw blade size 300 x 3.4 x 32 mm -Blade rotation speed RPM -Section - at 90 ° round 90 mm - or square-80 mm -Pneumatic chucks -Material supplies automatic position control -Easy lifting up to approx. 1000 mm -Multiple hub -Swing-arm control panel with CNC control MEP -MOT. Dust aspiration + mobile chip extraction -Drive 400 V / 1,1 kW - space requirement approx. B 2750 x H 1800 X 2000 mm -Weight approx. 600 kg

Condition: good (used), Year of construction: 2008, machine/vehicle number: 21100122-F, Offer 25108 Technical Data: - Saw blade dimensions 350 x 3.4 x 32 mm - Saw blade speed 3400 rpm - Cutting range at 90° round 120 mm - or flat 105 x 105 mm - 180 x 70 mm - at 45° round 110 mm - flat 135 x 60 mm Gjdpowq N Swefx Aadsin - Bevel adjustable left + right 45 ° - Tiltable bevel adjustment of the saw head for ship cuts left - Pneumatic vises - Discharge – roller conveyor with length stop 2000 mm - Feed – roller conveyor 3000 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 600 x H 1730 x D 1200 mm - Weight approx. 180 kg

Year of construction: 1998, condition: good (used), machine/vehicle number: 080024-38 U, Offer 23332 Gisdpfx Aasp Ebn Sjdjn Technical data: - Saw blade dimension 250 x 2 x 40 mm - Saw blade spindle speed 52 rpm - cutting range at 90° round 80 mm - flat 95 x 60 mm - miter adjustable up to 45 ° - Material vice - Drive 400 V / 0,5 kW - Space requirement approx. W 650 x H 1500 x D 750 mm - Weight approx. 100 kg

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW weight of the machine ca. 0,41 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. With Linear guide of the saw head. •new system with head sliding vertically on linear guides Upstream slide rails with recirculating balls. •Double gear set for high transmission performance •4 speeds 15/30/45/90 rpm •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 350x32x2.5 for solid and profile material •Vise with counter-clamping device for double workpiece clamping •Base with removable coolant tray •Chip clearing brush Gjdpofg Rlbefx Aadsin •Length stop for cuts of the same length •Material support arm, at the same time connection option for roller conveyor/ loading side •Turntable with additional central axis

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Gsdofgpdlepfx Aadoin Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW weight of the machine ca. 0,38 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Manual vertical circular saw for miter cuts from 60° left to 45° right.

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm Gijdpfx Aaefg Rlcsdsn capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, SEMI-AUTOMATIC CIRCULAR SAW MEP TIGER 352 SX EVO - Blade rotation at 4 speeds (15/30/45/90 rpm) - Rotating table mounted on central spindle and axial bearing - Cutting head feed on double linear guideway Gjdpfx Aasxdr Rtodein - Mechanical stops at -45°, 0°, +45°, and +60° with locking device at any angle - User interface with display