Used Mep Shark 320 for sale (145)

Condition: new, cutting diameter 330 mm capacity 90 degrees: flat 510 x 320 mm capacity 90 degrees: square 320 x 320 mm capacity 45 degrees: flat 350 x 320 mm capacity 45 degrees: round 320 mm Rsdpfx Aboxaa Tzsgsw capacity 45 degrees: square 300 x 300 mm capacity 60 degrees: flat 230 x 310 mm capacity 60 degrees: square 200 x 200 mm capacity 60 degrees: round 200 mm turning speed range: 15 - 100 m/min dimensions of saw-band 4640 x 34 x 1,1 mm engine output 4,0 kW weight 1190 kg Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device Rsdpjxabpwefx Abgsw

Condition: new, cutting diameter 230 mm capacity 90 degrees: flat 230 x 230 mm capacity 90 degrees: square 230 x 230 mm vice 235 mm turning speed range: 15 - 100 m/min dimensions of saw-band 2950 x 27 x 0.9 mm Control MEP CNC total power requirement 3.18 kW weight of the machine ca. 1175 kg dimensions of the machine ca. 1980 x 1105 mm * Automatic two-column band saw with a footprint of only 2.5 square meters * * Highest performance in the smallest space * Features : - powerful CNC automatic band saw in two-column design * for cuts at 0° - with Windows-CE based touch screen control * 5.0 - 180° tiltable control panel * Up to 100 cutting programs, each with different quantities and lengths * Minimizes programming time for frequently executed jobs - 2x operating modes (semi-automatic and automatic) * enable efficient cutting under all conditions - Saw head feed via linear guides driven by hydraulic cylinders . with preloaded recirculating ball bearings Rsdpfx Ajxabq Uobgew * Reduction of mechanical vibrations during cutting - Automatic alignment of the front saw blade guide head * Reduces processing time - feed system with 600 mm stroke is repeatable and cuts all lengths - vertical pair of rollers can cut any type of bar or bundle material - infinitely variable blade speed adjustment from 15 to 100 m/min - robust cast iron structure (G25) to compensate for vibrations - Safety housing in accordance with the latest safety regulations . the Machinery Directive EN 13898/2007

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm Rjdpfx Aboxaav Asgew capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3650 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice

Condition: new, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2 mm cutting diameter minimum 5 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm total power requirement 2,2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces . and a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in the network with a residual current device (FI), this should be universally sensitive and not less than 300 mA. Rsdpsxabwhefx Abgsw SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, cutting diameter 225 mm Rodpfx Ajxaacisbgow capacity 90 degrees: flat 245 x 150 mm capacity 90 degrees: square 200 x 200 mm capacity 45 degrees: flat 160 x 140 mm capacity 45 degrees: round 160 mm capacity 45 degrees: square 140 x 140 mm capacity 60 degrees: flat 110 x 80 mm capacity 60 degrees: square 90 x 90 mm capacity 60 degrees: round 90 mm vice 245 mm turning speed range: 46/92 m/min saw band length 2450 x 27 x 0,9 mm total power requirement 0,7 / 0,81 kW weight of the machine ca. 265 kg Equipment: - compact / robust manual band saw - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - hydraulic lowering of the saw bow * stepless feed adjustment * limit switch at the end of the cut - 2x saw band speeds - saw band guide made of hard metal plates - manual vice with quick lock - machine base - coolant device - manual saw band tension (star grip at the front) - 1x angle stop - 1x metal saw band - operating instructions

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 x 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 x 180 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 x 110 mm capacity 60 degrees: round 120 mm vice 285 mm turning speed range: 36 / 72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 370 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - one-sided miter cut up to 60° - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - 2x saw band speeds - saw band guide made of hard metal plates - 1x saw band - 1x angle stop Rsdpfxexaa H Ie Abgew - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: used, Year of construction: 2006, dimensions of saw-band 2950x27x0,9 mm 15-100 m/min 285 mm capacity 90 degrees: square 220 mm capacity 90 degrees: round 250 mm capacity 90 degrees: flat 280x220 mm Rjdpfjyvvm Eex Abgjw capacity 60 degrees: round 120 mm capacity 60 degrees: square 80 mm capacity 60 degrees: flat 140x100 mm capacity 45 degrees: round 230/200 mm capacity 45 degrees: square 200/170 mm capacity 45 degrees: flat 220x200/200x140 mm total power requirement 2,2 kW Weight 990 kg Overall size 2500x2230x2050 mm Accessories / equipment: - Discharge roller conveyor with pneumatic stop, 350 mm wide, digital, length 7.000 mm

Condition: new, cutting diameter 330 mm capacity 90 degrees: flat 510 x 320 mm capacity 90 degrees: square 320 x 320 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Semi-automatic, electro-hydraulic band saw machine for cutting Rjdpfjfg E Ibex Abgow 60° left to 60° right. Versatile machine with a tape of 4640 x 34 x 1.1 mm for the Cutting pipes, profiles and beams up to a maximum cutting range from 510x320 mm to 0°. The control console on a swiveling arm allows for comfortable and safe operation from any position. Electronic inverter for continuous belt speed regulation from 15 to 100 m/min. Large turntable with a diameter of 280 mm and engraved exact fine scaling, easily adjustable and stored.

Condition: new, cutting diameter 250 mm saw band length 2950x27x0,9 mm band speed 36/72 m/min total power requirement 1,8 kW Redpfjfg E H Nex Abgsw weight of the machine ca. 440 kg Basic equipment: Vice with quick adjustment and adjustable guide bars Hydraulic band tensioning device with tensioning pressure display Base frame with removable coolant tray Chip clearing brush Precision stops set for cuts of: 0°, 45° and 60° left and 45° right Turntable for double miter cuts Electric coolant device 48 V (A micro spray device can be installed)

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108401 23-D, Offer 25318 Technical Data: - Manual bandsaw machine - Bandsaw blade dimensions: 2375 x 20 x 0.9 mm - 2 cutting speeds: 33 / 66 rpm - Max. clamping capacity: 205 mm - Mitre adjustable left & right: 30° - Cutting range: - 90°: round 160 mm - square 160 mm - flat 200 x 100 mm - 45° left & right: round 140 mm - flat 140 x 60 mm - Drive: 400 V / 1.5 / 1.8 kW - Coolant system Rodpfxsxta N Ae Abgjw - Discharge roller conveyor with stop: 3000 mm - Infeed roller conveyor: 1500 mm - Weight: approx. 350 kg - Space requirement: approx. W 1100 x H 1700 x D 1550 mm

Condition: reconditioned (used), Used semi-automatic bandsaw MEP Shark 281 sxi evo Three operating modes: semi-automatic, manual, and manual dynamic (gravity) Blade dimensions: 2950 x 27 x 0.9 mm Rsdpeyyn Suofx Abgsw Two blade speeds: 36/72 m/min Max vice opening: 285 mm Cutting capacity: at 0° round 250 mm, rectangle 280x200 mm at 45° round 190 mm, rectangle 180x180 mm at 60° round 120 mm, rectangle 110x110 mm Year: 2006 Weight: 435 kg Fully serviced.

Condition: new, cutting diameter 280 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 330 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,24 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Attention: special price!!! •Fully automatic hydraulic band saw •Miter cuts up to 60° left possible •Saw band length: 3650x27x0.9 •Single stroke: 600 mm (programmable up to 10m) •Simple touchscreen operation. •Saw arm made of nodular cast iron - robust and stable Rsdsfg E H Djpfx Abgjw •Required space 3.4 m² •Footprint 1900mm wide x 1800mm deep

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm band speed 15 - 115 m/min total power requirement 5,5 kW Rodpsfm T Hbsfx Abgjw weight of the machine ca. 2,8 t dimensions 3,2 x 2,2 x 2,7 m Automatic electromechanical band saw machine in two-column design for 0° Cuts on solid material and profiles made of steel, stainless steel and Steel alloys up to a maximum of 350x350 mm. The standard equipment includes: Powered chip conveyor, to be mounted on the right or left of the machine. Clamping pressure regulation of the vices. Feeder with vertical rollers for lateral material support. Sensors for initial material detection. Clamping pressure regulation. 300 programs can be saved. The machine is available with a 34 or 41 band - at no extra charge. Price on request.

Condition: new, 355 mm 350 x 350 mm Rjdpfx Aofg E Hzebgsw saw band length 4640 x 34 x 1,1 mm table height mm band speed 15 - 115 m/min total power requirement 4,0 kW weight of the machine ca. 2,8 t dimensions 3,1 x 2,2 x 2,2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two Column construction for 0° cuts on solid material and steel profiles, Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: + Powered chip conveyor, can be installed on the right or left of the machine. + Clamping pressure regulation of the vices. + Feeder with vertical rollers for lateral material support. + Numerically controlled band saw machines, which are also operated semi- automatically can be done with the new MEP 50, especially from MEP for automatic Machine developed, Windows “CE” based control. + Cutting cycle “clean cut” The feeder pushes the workpiece at the back to avoid scoring on the cutting surface when the tape moves up again at the end of the cut. + Fieldbus communication system with double microprocessor and serial Connection. + The user interface with 7” touch screen display and mechanical Buttons are used to ensure the operating functions of the sawing machine reliable, simple and intuitive use, as well as a Real-time control of all cutting parameters

Condition: new, dimensions of saw-band 3650 x 27 x 0,9 mm speed 15 - 100 m/min vice 335 mm capacity 90 degrees: round 300 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330 x 260 mm capacity 45 degrees: round 260 / 200 mm capacity 45 degrees: square 250 / 180 mm capacity 45 degrees: flat 270 x 200 / 200 x 160 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170 x 170 mm total power requirement 2,2 kW weight 1.105 kg dimensions 2700 x 2300 x 1800 mm Fully automatic electro-hydraulic band saw with multi-micro processors and additionally semi-automatic, semi-automatic-dynamic and manual Function. - Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with two controlled axes that allow for the same material thickness 1000 various editing programs, each with a different cutting length and quantity, too program. - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45 ° right to 60 ° left) - Semiautomatic dynamic system (manual lowering of the saw band bow up to the desired position and cycle start via the push button.) - Manual or semi-automatic-dynamic cycle to cut directly without Programming. Some features: - New fieldbus communication system (Modbus protocol) - Display with 20 characters x 4 lines to display the technical parameters such as: - Saw blade speed - Number of programmed and executed cuts - saw blade thickness - feed length - cutting time - ammeter - belt tension - Display of (about 100) diagnostic messages and warnings, everything in the respective user language. - Display and entry of the alarm and error messages with the possibility of display incidents that have occurred. - automatic parameter setting via control, if a new driver or Inverter is mounted. - Electronic inverter for continuous regulation of the belt speed of 15 up to 100 m / min. - New hydraulic control unit of the latest generation, highly efficient and with low energy consumption. - New material supply of 600 mm with stepper motor and ball screw mounted on opposite ball bearings. - Hublauf the saw blade directly from the control panel programmable, for Adaptation to the cutting material. - Electronic band tension control. - Automatic monitoring of the cutting load by a direct on the Cylinder mounted servo valve. - The coolant sump (equipped with 2 electric pumps for lubrication and Cooling of the saw blade) is installed in the base. - Swarf drawer (can be replaced by a chip conveyor - see Optional) - Preparation for the installation of the minimum lubrication set of the saw blade Rjdpsyv Nylefx Abgew (Optional), in addition to conventional standard lubrication with emulsion oil. Chip removal brush. - Machine is intended for lifting truck transport. - Bi-metal saw band for solid and profile material.

Condition: new, dimensions of saw-band 2950x27x0,9 mm Redpfx Abeyv Nptogow 2 speeds 36/72 m/min Vice opening 285 mm capacity 90 degrees: round 250 mm capacity 90 degrees: square 220 mm capacity 90 degrees: flat 280x220 mm capacity 45 degrees: round 230/200 mm capacity 45 degrees: square 200/170 mm capacity 45 degrees: flat 220x200/200x140 mm capacity 60 degrees: round 120 mm capacity 60 degrees: square 80 mm capacity 60 degrees: flat 140x100 mm output 1,5 / 1,8 kW Weight 440 kg dimensions 1700x1000x1650 mm - with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the Saw bow by the weight of the saw head - The lowering speed is infinitely regulated. Single cuts can do so be carried out with uniform feed - The SHARK 282 CCS has a turntable for double-sided miter. The cut always takes place in the same groove

Condition: new, dimensions of saw-band 4640x34x1,1 mm 15-100 m/min 515 mm capacity 90 degrees: square 320 mm capacity 90 degrees: round 330 mm capacity 90 degrees: flat 510x320 mm 320 mm 320 mm 350x320 mm 230 mm 230 mm 230x310 mm 320 mm 320 mm 380x320 mm 250 mm Redpfx Aoyv Nkkjbgjw 250 mm 250x320 mm total power requirement 4 kW Weight 1190 kg Overall size 2000x1200x1800 mm

Condition: new, 36/72 m/min 285 mm capacity 90 degrees: round 250 mm capacity 90 degrees: square 230 mm capacity 90 degrees: flat 280x200 mm capacity 45 degrees: round 190 mm capacity 45 degrees: square 180 mm capacity 45 degrees: flat 180x180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: square 110 mm capacity 60 degrees: flat 110x110 mm dimensions of saw-band 2950 x 27 x 0,9 mm Rsdpfx Abeyv Nfujgjw output 1,5 / 1,8 kW Weight 435 kg dimensions 1700x1000x1840 mm Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts - vise opens

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 350 mm dimensions of saw-band 4640x34,1,1 mm 355 mm sawband speed 15-115 m/min weight of the machine ca. 2800 kg dimensions of the machine ca. 3050x2190x2200 mm Rodpfx Aeyv Nd Rebgew

Condition: new, 36/72 m/min 285 mm dimensions of saw-band 2950 x 27 x 0,9 mm capacity 90 degrees: square 220 mm capacity 90 degrees: round 250 mm capacity 90 degrees: flat 280x220 mm capacity 60 degrees: round 120 mm capacity 60 degrees: square 80 mm capacity 60 degrees: flat 140x100 mm capacity 45 degrees: round 230/200 mm capacity 45 degrees: square 200/170 mm capacity 45 degrees: flat 220x200/200x140 mm total power requirement 1,5/1,8 kW Weight 485 kg Overall size 1970x1150x1840 mm Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut Rjdpeyv Narsfx Abgsw - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desired Position and cycle start via the manual button. Upper position is saved automatically.

Condition: new, dimensions of saw-band 2950x27x0,9 mm Rsdpeyvvqkjfx Abgow 36/72 m/min 285 mm capacity 90 degrees: round 250 mm capacity 90 degrees: square 230 mm capacity 90 degrees: flat 280x200 mm capacity 45 degrees: round 190 mm capacity 45 degrees: square 180 mm capacity 45 degrees: flat 180x180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: square 110 mm capacity 60 degrees: flat 110x110 mm total power requirement 1,5/1,8 kW weight 375 kg dimensions 1700x1000x1650 mm Domestic equipments: - with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the Saw bow by the weight of the saw head - The lowering speed is infinitely regulated. Single cuts can do so be carried out with uniform feed

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Redpfxsul Svle Abgew Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg The machine is fully refurbished and tested.

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, Bandsaw MEP Model: SHARK 330 CNC FE Year: 1996 Condition: Refurbished Cutting capacity at 0 degrees: round: 260 mm – square: 230 mm – rectangular: 330x230 mm Cutting capacity at 45 degrees left: round: 240 mm – square: 200 mm – rectangular: 230x200 mm Blade dimensions: 3150x25.4x0.9 mm Cutting speed: Slow: 36 m/min – Fast: 72 m/min Table height: 690 mm Blade motor: 1.5 kW Electro-pump motor: 0.13 kW Hydraulic power unit motor: 0.22 kW Rsdpfx Aoyk Unvobgsw Machine dimensions: 2460x2020x1790H mm Weight: 1220 kg Overhauled Ready for delivery

Condition: refurbished (used), Year of construction: 2011, Used automatic metal band saw MEP SHARK 282 nc evo Year of manufacture: 2011 Blade dimensions: 2950x27x0.9mm Redpfx Abeykvg Hjgjw Cutting angle: from -45° to +60° Four operating modes: manual, semi-automatic dynamic, semi-automatic, and automatic Blade cutting speed: from 15 to 100m/min Cutting capacity at 0°: - round 250mm - square 220mm - rectangle 280x220mm Machine weight: 980kg The machine is fully refurbished.