Used Metal Material for sale (47,315)

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are 80x stacking boxes, II.choice Manufacturer: SSI Schäfer Type: Traka 14-6 Material: Metal Surface: Ral 5002, ultramarine blue dimensions: 600x400x120 mm Weight: approx. 2,840 kg Further data / information: Hole pattern: 117 Todpehm Sltofx Adlef bottom + all 4 side walls staggered round perforation Ø: approx. 12 mm distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stacking boxes II. Choice. There may be scratches, soiling or color defects may be present. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 50 mm -Load capacity: 6000 kg -Number: 1x terminals available -Price: per piece Todpfjxxl Hqox Adlsf -Weight: 28 kg/piece

Year of construction: 2019, condition: good (used), Cassel Shark 2 Metal Detector The METAL SHARK is used free-standing or combined with conveyor belts. Using 3D detection technology, it detects the smallest magnetic and non-magnetic metal contaminants (iron, stainless steel, aluminum etc.) precisely and reliably even under difficult conditions. The robust, closed stainless steel housing is stable and easy to clean – ideally suited to the meat industry. Reliably detects metals in raw or frozen meat in standardized E2 boxes Tsdoxyw N Tepfx Adljf Especially high sensitivity with moist or frozen products with 3D detection Easy setup and intuitive operation with Autocalibration and TeachAssistant Maintenance-free design with automatic and continuous calibration of detector coils Manufacturer: Cassel Model: Shark 2 BD Year: 2019 Power: 0,75kW Aperture LxW: 385x260 mm Material: Stainless Steel

Condition: excellent (used), fuel type: electric, color: green, Year of construction: 2015, operating hours: 25,987 h, Year of manufacture: 2015 Field of application: Construction Empty weight: 30.000 kg Mast length: 13 m Technical condition: very good Visual appearance: very good Price: On request Serial number: 825.7.2315 Please contact Ferdinand Pater for more information Stock no. D19 Machine Brand Sennebogen Type: 825AE-D-series Weight: 30 Ton Serial number: 825.7.2315 Building year: 2015 Worked hours: 25.982 Engine: Electro engine 400V 110kW Boom: K13 Boom configuration, boom 7.5 meter, stick 5.8 meter Tedjt Dlv Nspfx Adljf Cabin: "Maxcab industrie, Hydraulic Cab Riser, 2,7 m. in height gantry catwalk on cabin, extra window 320x270mm in cabin floor " Upper carriage: Standard Sennebogen color, Central greasing system, Hydro-clean filter Undercarriage: Sennebogen ST20, 400x400 including 2x 5 tons extra counterweight, 1 meter extra pilon. Lights: Several (LED) lights on boom, stick and cabin Extra: Machine has a brand new origional Sennebogen slewing ring, is serviced and clean, ready for work

Condition: used, This listing is for the Gilson PIPETMAN P10 1-10uL Single Channel Pipette with Metal Ejector Colourcode Red The unit is in full working condition and is ready for immediate use Tedpoxv Dt Defx Adlef The traditional “L” version: robust, bomb‑proof build, fully autoclavable stainless steel tip‑ejector, volume adjustable 1–10 µL. PVDF and stainless exterior, designed to be durable in tough lab setting Fully adjustable 1–10 µL range with fine decimal display Dual-position metal tip ejector supports D10 and DL10 tips Low pipetting resistance, especially in G-series (≈2 N force) PVDF body + stainless steel parts for chemic

Year of construction: 2017, condition: good (used), Loma IQ3+E Metal detector checkweigher Todpoual Amsfx Adlsf 2017, Stainless, overall belt dimensions 1600mm x 330mm, aperture 450mm L x 225mm W, AIC checkweigher 250g -3500Kgs, mobile, 1Ph

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. The oil drip tray is used for the storage of non-spillable or opened containers such as paint cans, paint buckets, cleaning agents, etc. The oil drip tray can be optimally placed in a shelf rack. The scope of delivery includes: 01x oil drip tray, II. choice (new goods) Manufacturer: SSI Schäfer Tsdpfxon Atm Dj Adlsf Type: OAW 4800 Material color: sendzimir galvanized Capacity: approx. 60 liters load capacity: 200,00 kg total width: approx. 1.020 mm Usable width: approx. 970 mm Total depth: approx. 790 mm Usable depth: approx. 784 mm Total height: approx. 125 mm Useful height: approx. 95 mm Material thickness: approx. 3.00 mm Weight | pc.: approx. 26,960 kg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a dispatch of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: new, Center length ----- 2000 mm Center height ----- 280 mm Turning diameter ----- 560 mm Passage of main spindle ----- 105 mm Bed width ----- 350 mm Spindle speed ----- 25-1600 rpm Motor ----- 7.5 KW Tedpfsga Tvpsx Adlef INCLUDING * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOC3 with 4 baffles * Rapid traverse X,Y * Electric brake * Foot brake * Self-centering 3-jaw chuck * Independent 4-jaw chuck * Fixture plate * Fixed and moving goggles * LED working light * Cooling system * Box with various tools

Condition: good (used), Cassel Metal Shark metal detector If metal is detected the outfeed belt will open (see the video). Tsdpfx Adjvzw Dqelsf The throughput of the head is 15cm in height and 65cm in width. Machine Dimensions LxWxH: 1.700x1.300x2.250 mm

Year of construction: 2008, condition: ready for operation (used), Control Unit Brand SIEMENS Model SIMATIC HMI Main Drive Number of axis 3 Additional Equipment Includes tube and mandrel rod support. Bending mandrel is hydraulically extendable with a programmable pre-release. Bending mandrel has automatic minimal quantity lubrication. Tsdpoxz H Smsfx Adlsf Oil cooler equipped. This 3-axis TRACTO-TECHNIK Tubotron 30 CNC was manufactured in 2008. It features a programmable sequence control, Simatic Panel PC 677 for menu navigation, and manual or automatic operation modes. The machine includes a free-standing bending head, hydraulic pipe clamping, and a hydraulic long-neck chuck for precise positioning. Ideal for high-quality bending operations. Contact us for more information about this machine. Application Types Other Sheet Metal Machinery

Condition: used, This listing is for the Gilson PIPETMAN P1000 100-1000uL Single Channel Pipette with Metal Ejector The unit is in full working condition and is ready for immediate use Key Features & Specifications Volume Range: Fully adjustable from 100 to 1000 µL — ideal for a wide range of liquid handling needs Precision & Accuracy: Systematic (bias): at 100 µL ±3 µL, at 500 µL ±4 µL, at 1000 µL ±8 µL Random (precision): ≤0.6 µL at 100 µL, ≤1 µL at 500 µL, 1.5 µL at 1000 µL Construction: Built with durable PVDF and stainless steel components — trusted for reliability, robustness, and long lifespan Tedpfsxv Dtdjx Adljf Ergonomics: Designed for comfortable use with reduced pipetting forces to minimize hand fatigue during prolonged sessions Maintenance: Easy to dismantle with an autoclavable tip holder and ejector, ensuring convenient cleaning and decontamination Metal Tip Ejector: Durable metal ejector reduces tip ejection force and enhances longevity

Condition: excellent (used), power: 129 kW (175.39 HP), Year of construction: 2015, operating hours: 11,202 h, Equipment: air conditioning, Applicable material: Waste Drive: Wheel Empty weight: 23.200 kg Tjdpfexzx Uysx Adlef Make of engine: CAT CE mark: yes Technical condition: very good Visual appearance: very good Production country: FR Please contact Nedtrax B.V. for more information Caterpillar MH3022 Year 2015 11202 hours* * *CE* Caterpillar MH3022 Year: 2015 Reading hours: 11202 h Weight: 23200KG 129.4KW C7.1 Acert Airco/Klima camera Hydraulic elevated cabin Cabin protection central greasing 4 Outriggers CE-MARKED In good condition

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Tedpohm Slpefx Adljf Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are: 05x stacking boxes, II.choice Manufacturer: SSI Schäfer Type: Traka 14-6 Material: Metal Surface: Ral 5002, ultramarine blue Dimensions: 600x400x120 mm Weight: approx. 2,840 kg Further data / information: Hole pattern: 117 bottom + all 4 side walls staggered round perforation Ø: approx. 12 mm distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stacking boxes II. Choice. There may be scratches, soiling or color defects may be present. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: new, Year of construction: 2025, Optimum Optisaw SD 500 Double miter metal band saw with swiveling saw bow Art. no. 3292380 length approx. 2122 mm width/depth approx. 1046 mm height approx. 1497 mm Weight approx. 522 kg Electrical data Motor power coolant pump 100 W Total connected load 3.8 kW Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 35 / 70 m/min Saw band length 3770 mm Saw band width 34 mm Saw band thickness 1,1 mm Cutting angle 45 - -60 ° Feed Hydraulic via lowering cylinder Lifting of saw bow manually Cutting ranges 0° round (solid material) 355 mm 0° square (solid material) 280 mm 0° rectangular upright (solid material) 280 x 490 mm -45° round (solid material) 290 mm -45° square (solid material) 250 mm -45° rectangle standing (solid material) 250 x 250 mm +45° round (solid material) 355 mm +45° square (solid material) 280 mm +45° rectangle upright (solid material) 280 x 340 mm +60° round (solid material) 230 mm +60° square (solid material) 180 mm +60° rectangle standing (solid material) 180 x 220 mm Heavy industrial design Low noise operation High cutting accuracy due to vibration-free running Miter adjustment -45° to 60° by swiveling the entire saw bow High-quality bi-metal saw band as standard equipment Microswitch for automatic end stop Coolant pump Ball bearing saw band guide with hard metal plates for optimal cutting results Easy adjustment of the lowering speed by means of feed control valve in the control panel Large dimensioned quick clamping screw stoc [...] Tjdpfx Asgd Si Eedlef

Condition: excellent (used), power: 110 kW (149.56 HP), fuel type: diesel, Year of construction: 2018, operating hours: 3,680 h, General information Year of manufacture: 2018 Model year: 2018 Serial number: 107888 Weights GVW: 24.200 kg Functional Mast length: 10 m CE mark: yes Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Additional information Please contact Ferdinand Pater for more information LH24, year 2018, 3600 hours, perfect condition New engine oil and origional Liebherr filters New tires Todpfxsxqryus Adljf Please ask for rental options!!

Condition: good (used), Year of construction: 2013, operating hours: 2,300 h, functionality: fully functional, machine/vehicle number: 630124, DEBURRING MACHINE MANUFACTURER: ERNST / Sematec MODEL: ATLAS EBR YEAR OF MANUFACTURE: 2013 Condition: Used Operating hours: 2,300 hours Working width: 1,500 mm Max. material pass-through: 1,520 mm Workpiece thickness: 1–100 mm Feed rate: 0.5–4.0 m/min, steplessly adjustable Conveyor belt: Rubber Working height: 1,000 mm Max. part weight: 160 kg/m² Deburring roller: 420 mm diameter 50 oscillating strokes per minute Drive motor: 15 kW Abrasive size: 1,540 mm x 1,540 mm ATLAS brush module – SPIN 2 rotating brush units: 300 mm x 260 mm Vacuum system for small parts: 200 mm wide, 80 x 80 mm Infeed table, LxWxHxWork width x Sheet thickness: 2,704 x 385 x 1,650 x 0.8–100 mm Deburring module: 2,704 x 580 x 1,650 x 1,500 x 0.8–100 mm Brushing module: 2,704 x 870 x 1,650 x 1,500 x 0.8–100 mm Tsdpfoxuu Dksx Adlef Discharge/ belt cleaning: 2,704 x 290 x 1,650 x 1,500 x 0.8–100 mm Deburring module - Power Electric Air pressure Extraction m³/h Weight 16 32 6/80 bar 2,500/25 400 kg Brushing module - 12 24 6/80 2,500/725 1,600 kg Rotor module - 20 40 6/10 4,500/25 1,800 kg Discharge module - 1 2 - - 400 kg Operating voltage: 400 V / 50 Hz Special voltage: 480 V / 60 Hz Control voltage: 24 V Compressed air: 6 bar, dry and oil-free Feed rate: 0.5 – 4 m/min stepless (option up to 1.0 – 8 m/min stepless) Working height: 1,000 mm The external filter is not included in the sale. Working width 1,500 mm, maximum thickness 100 mm, vacuum conveyor runs the full machine width. The first station is a grinding roller (foam rubber roller with abrasive paper and pneumatic tension), which can also oscillate as required and removes burrs. The second module consists of two steel wire brush rollers that round off/knock down the burrs. This is followed by a rotor module (rotating multi-brush head) for fine edge rounding. EC Declaration of Conformity Dust collector is not included, but we can offer a suitable unit as an option. Operating manual included. The machine is sold without infeed roller conveyor!

Condition: used, Uncoiler and recoiler KEMMERICH Type 2V AR / Z Serial No. 3395 Year of manufacture: 1980 Coil weight: 80 kg Coil inner diameter: approx. 250 - 440 mm (with the support bolts) Coil outer diameter: 650 mm Distance from center of mandrel to base: 915 mm Mandrel rotation speed: 16 rpm Motor power: 0.18 kW Power supply: 380 Volt, 50 Hz - Coil holding via 4 support bolts – mandrel holding arms are missing (needs repair) - Central expansion of the 4 holding bolts via eccentric lever - Simple on/off switch - Simple mechanical loop control actuation with electrical switch - V-belt drive via gear motor Tjdsxy Stajpfx Adljf - Mechanically adjustable brake shoes via set screw - Height adjustable by clamping to the base column Dimensions (L x W x H): 700 x 650 x 1300 mm Net weight: 110 kg Surcharge for refurbishing the 4 support bolts for the coil holding device = EUR 200 net

Condition: good (used), The scope of delivery includes: 03x stacking container, used Manufacturer: Thyssen Material color: hot-dip galvanized Total width: approx. 850 mm (outside- outside) frame width: approx. 800 mm useful width: approx. 780 mm Total height: approx. 580 mm (floor - OK crane eye) Frame height: approx. 540 mm Useful height: approx. 400 mm Underride height: approx. 100 mm Total depth: approx. 560 mm (outside - outside) Frame depth: approx. 480 mm Useful depth: approx. 400 mm stackable: yes crane eyes: 4 pieces Todpfem Sgmyox Adlsf diameter of crane eyes: approx. 40 mm Remark: The stacking or transport containers may be bent. Furthermore, they may have dents or other damages. other damages.

Condition: new, Year of construction: 2025, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Todjg U Uv Repfx Adlof Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: good (used), functionality: fully functional, We are looking for company liquidations of sheet metal processing machines Todpjvzl H Tsfx Adlsf

Condition: used, The scope of delivery includes: 01x stacking container, used Material color: hot-dip galvanized Tedok Nlppspfx Adljf Total width: approx. 850 mm (outside- outside) frame width: approx. 800 mm usable width: approx. 780 mm Total height: approx. 580 mm (floor - OK crane eye) Frame height: approx. 540 mm Useful height: approx. 400 mm Underride height: approx. 100 mm Total depth: approx. 560 mm (outside - outside) Frame depth: approx. 480 mm Useful depth: approx. 400 mm stackable: yes crane eyes: 4 pieces diameter of crane eyes: approx. 40 mm Remark: The stacking or transport containers may be bent. Furthermore, they may have dents or other damages. other damages. The above price refers to the Pickup price per piece!

Condition: new, Year of construction: 2025, MBSM 150-20 For sanding surfaces, edges and rounding off Powerful motors with vibration-free running to achieve the best sanding results Working height adjustable due to infinitely variable inclination of the sanding unit Workpiece support angle adjustable Continuous flat sanding surface enables sanding of long workpieces as well One suction nozzle each at the spark box and at the rear belt roller Protective disc can be folded away Tsdpjhk Df Dsfx Adlsf Quick clamping system for changing the abrasive belt in seconds Simple adjustment of the belt run via adjusting screw Motor with brake and circuit breaker Dimensions and weights Length approx. 527 mm width/depth approx. 995 mm height approx. 1025 mm Weight approx. 114 kg Suction Nominal width of external suction nozzle 60 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Noise emission Emission sound pressure level at the workplace Lp (idling without extraction) 80 dB(A) Grinding unit Grinding width max. 150 mm Sanding belt length 2000 mm Sanding belt width 150 mm Belt speed(s) 30 m/s Contact wheel diameter 200 mm

Condition: excellent (used), The scope of delivery includes: 01x lattice box, used Length: approx. 820 mm Depth: approx. 420 mm Height: approx. 420 mm Material: steel Material color: galvanized Tjdpfx Adomnnvaolsf Wire Ø: approx. 4.50 mm Mesh width: approx. 54 x 54 mm Stackable: yes Stacking edge: 30 x 18 mm (W x H) Inner height: front approx. 185 mm | rear: approx. 390 mm Weight / piece: approx. 15.74 kg Note: half open in width Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: new, Year of construction: 2025, Optimum Metal Band Saw OPTIsaw S 275NV Metal band saws with pivoting saw frame. S 275NV with continuously adjustable saw blade speed Tsdpfx Adjgx T I Uelef Item number: 3300265 TECHNICAL DATA Dimensions and weights Length (product) approx. 1400 mm Width/Depth (product) approx. 685 mm Weight (net) approx. 185 kg Max. width/depth (product) approx. 985 mm Max. height (product) approx. 1700 mm Electrical data Drive motor power: 1.5 kW Connection voltage: 230 V Mains frequency: 50 Hz Coolant pump motor power: 90 W Machine data Saw blade speed(s): 20 – 90 m/min Saw blade length: 2480 mm Saw blade width: 27 mm Saw blade thickness: 0.9 mm Cutting angle: 0 – 60° Feed: continuously variable Adjustable Manual saw frame lifting Cutting ranges Cutting range 0° round (solid material) 225 mm Cutting range 0° square (solid material) 190 mm Cutting range 0° rectangular horizontal (solid material) 150 x 245 mm Cutting range +45° round (solid material) 145 mm Cutting range +45° square (solid material) 150 mm Cutting range +45° rectangular horizontal (solid material) 190 x 150 mm Cutting range +60° round (solid material) 90 mm Cutting range +60° square (solid material) 90 mm Cutting range +60° rectangular horizontal (solid material) 120 x 90 mm Explanation of cutting range: Cutting range determined based on the weight of the saw frame with aluminum. May vary depending on the material used and may be smaller (not cutting capacity). SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base Coolant pump Location: From stock 54634 Bitburg - available immediately -

Condition: good (used), Included in delivery: 03x stacking container, used Manufacturer: SSI Schäfer Material color: hot-dip galvanized Total width: approx. 850 mm (outside- outside) frame width: approx. 800 mm Usable width: approx. 770 mm Total height: approx. 670 mm (floor - OK crane eye) Frame height: approx. 605 mm Useful height: approx. 470 mm Underride height: approx. 105 mm Total depth: approx. 550 mm (outside - outside) Frame depth: approx. 500 mm Useful depth: approx. 490 mm Tjdponabz Sjfx Adlsf Further technical data of the stacking container: Weight / pcs.: approx. 37,000 kg load: maximum 0,8 t stackable: yes (stacking factor: 1+5) crane eyes: 4 pieces diameter of crane eyes: approx. 36 mm Remark: The stacking containers may be bent. Furthermore, they may have dents or other damages. other damages. Usage: The stacking containers are suitable due to your robustness especially for the workshop or transport. Due to the catch corners and reinforced feet a safe stacking is given. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.