Used Metal Milling Machine for sale (67,574)

Condition: excellent (used), Year of construction: 1998, Hermle UWF 802 M Hermle UWF 802 M with Heidenhain TNC 124 NC control, cycle-controlled, year of manufacture 1998, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Travel distances X: 500 mm, Y: 430 mm, Z: 400 mm Table size 800 x 390 mm Spindle connection ISO 40 Spindle speed 71 to 3550 rpm, 18 steps Feed rate X and Y 2 to 1600 mm/min, stepless Feed rate Z 2 to 1000 mm/min, stepless Rapid traverse X and Y 1.6 m/min Rapid traverse Z 1 m/min Spindle drive 3 kW Mains connection 400 volts, 50 Hz - Spindle speed via 18 gear stages - Vertical milling head, swiveling to the right and left - Hydro-mechanical tool clamping, vertical and horizontal - Automatic central lubrication - Coolant system located next to the machine - Control cabinet fixed to the machine - Fixed angle table - Operating manual and wiring diagram Space requirement L x W x H 2000 x 1800 x 1950 mm Weight approx. 1750 kg Accessories and equipment: Operating manual, electrical diagrams Machine feet Ledpfozbrz Ijx Ah Sjhn About the machine: We offer a Hermle UWF 802 M milling machine with Heidenhain TNC 124 NC control, cycle-controlled, year of manufacture 1998, in very good condition. The machine is fully functional, of course. All slides move very smoothly and evenly. Even at high speeds, the Hermle runs very quietly. This newer generation of milling machines is very user-friendly. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see for yourself what condition it is in.

Condition: used, Year of construction: 1967, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: Universal tool and cutter grinding machine Machine weight: approx. 3.1 t Travel distances X-axis travel: 1,100 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Spindle and milling head Distance spindle/table: 9–509 mm Swivel range of spindle head: 360° Spindle mount: SK 40 Spindle speed: 30–2,066 rpm Speed stages: 27 Milling head: original Huron adjustable milling head, adjustable in 3 dimensions Horizontal milling: possible Feed and rapid traverse Feed rate: 1.6–820 mm/min Feed stages: 27 Rapid traverse X-axis: 2.8 m/min Rapid traverse Y-axis: 2.8 m/min Rapid traverse Z-axis: 1.4 m/min Work table Clamping surface: 1,435 × 460 mm Performance data Total power requirement: 10 hp Lhodpfo Aa Au Sjx Ah Ssn Dimensions Width: approx. 2.36 m Height: approx. 1.65 m Depth: approx. 1.45 m EQUIPMENT Original Huron adjustable milling head Handwheels for X, Y, and Z axes Feeds for X, Y, and Z axes Safety machine main switch Adjustable work light Coolant system Heidenhain digital display

Condition: good (used), Internal article number: 26031 Universal milling machine Deckel FP1 Continuously variable feed + Collet set (S20x2) + Hydraulic machine vice Röhm 110 The tool holders shown in the pictures are not included in the offer. The servo motor has been overhauled! Travel distances: X300 / Y160 / Z340 mm Spindle stroke: 60 mm Power consumption: 1.9 kW Lhodpfx Ajyqx S Ejh Son Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: Continuously variable, 5-500 mm/min The machine is fully functional and can be inspected, by prior arrangement, in our heated warehouse with an area of over 500 m².

Condition: ready for operation (used), functionality: fully functional, spindle bore: 20 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 65 rpm, overall weight: 170 kg, total length: 1,200 mm, total width: 450 mm, Single-phase 230-volt, 2-speed motor is running smoothly. Lhsdpfx Ahez E Rymj Sjn Geared headstock, gears running in oil. 8 spindle speeds adjustable from 65 to 2800 RPM. Power feed in sideways directions. Thread cutting possible, gear changes included. MT2 tailstock spindle. Made in Austria. Emco cabinet. Quick-change toolpost. Distance between centers: 620mm Center height: 105mm Spindle bore: 20mm Emco FB2 milling column. Geared head, gears running in oil. 6 spindle speeds adjustable from 120 to 2000 RPM. Head adjustable in height and angle. MT2 spindle. Overall dimensions: 120x45x115cm Includes all accessories as shown in front of the machine. Contact us for shipping options! €2,650.00

Condition: used, Dimensions (LxBxH): 120 x 100 x 160 cm - Number of axes [pcs]: 3 - X-axis travel [mm]: 550 - Y-axis travel [mm]: 200 - Z-axis travel [mm]: 500 - Table length [mm]: 1000 - Table width [mm]: 250 - Tool holder: ISO40 - Min. spindle speed [rpm]: 44 - Max. spindle speed [rpm]: 2000 - Transport dimensions: 1200mm x 1000mm x 1600mm (l x w x h) Lhodpfxszrx Rcs Ah Sen Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Kunzmann WF 7/3 Tool milling machine Kunzmann WF7/3 with Heidenhain TNC 124 control, manufactured in 1997, in good CONDITION. CE compliant!! The machine comes from the vocational school of the HWK Augsburg and, according to the master craftsman, has approximately 300 operating hours. Technical data: Year of manufacture: 1997 Fixed angular table Clamping slots: 6 Slot width: 14 H 7 Slot spacing: 63 mm Maximum load: 300 kg Lhsdpfxezy Uh Te Ah Sjn Spindle speeds S I: 1 – 1125 min-1 Spindle speeds S II: 1126 – 4500 min-1 Feed rate (potentiometer 100%): longitudinal and transverse 0 – 2000 mm/min. Rapid traverse: longitudinal and transverse 5000 mm/min. Feed rate: vertical 0 – 2000 mm/min. Rapid traverse: vertical 4000 mm/min. Travel distances X/Y/Z: 600/400/400 mm Vertical and horizontal quill - SK40 Hydraulic clamping system Weight: approx. 2000 kg Dimensions: approx. 2 x 2 x 2 m Main drive motor: 7.5 kW Accessories and equipment: Heidenhain TNC 124 control Hydraulic chuck, vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating manual for the control unit and programming examples Handwheels Coolant system About the machine: Offered is a tool milling machine Kunzmann WF7/3 with a Heidenhain TNC 124 control. This universal milling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site under power. You can find more milling machines from well-known manufacturers on our website.

Condition: ready for operation (used), functionality: fully functional, spindle speed (max.): 2,900 rpm, spindle speed (min.): 100 rpm, total height: 1,700 mm, total length: 1,000 mm, total width: 750 mm, rotational speed (max.): 2,900 rpm, rotational speed (min.): 100 rpm, spindle mount: MK 3, type of input current: three-phase, overall weight: 260 kg, table length: 560 mm, table width: 250 mm, 3-phase 380V, 2-speed motor is running perfectly! Spindle RPM adjustable from 100 up to 2900. Geared head. Lsdpfxexnvrve Ah Sjhn 115mm drilling depth. MT3 spindle taper. Head adjustable in height and angle. Coolant pump in base. Cross table in good condition. Table dimensions: 560x250mm Made in Sweden! Overall dimensions: 100x75x170cm Includes all accessories shown in the pictures. Contact us for shipping options! €2,800.00 EX VAT!

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Travel ranges X-axis: 300 mm Y-axis: 300 mm Z-axis: 400 mm Work table Table dimensions: 620 × 390 mm Spindle Speed range: 40–2,500 min⁻¹ Tool holder: SK 40 Milling head, swiveling: ± 90° Feeds Feed range: 2–3,600 mm/min Rapid traverse: 4 m/min Control Control system: Deckel DIALOG 4 MACHINE DETAILS Machine type: Tool milling machine Manufacturer: Deckel Model: FP2 MC Dimensions (L × W × H): 2,000 × 1,800 × 1,800 mm Weight: 1,000 kg Ljdpo Adz Huofx Ah Sehn

Condition: like new (used), Year of construction: 2018, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, Year of manufacture: 2018 Table: 4,500 * 2,000 mm X: 4,000 mm Lhsdjz Nifdjpfx Ah Sjn Y: 3,000 mm Z: 1,500 mm Additional information: Heidenhain TNC 640 HSCI Main spindle ISO 50 Spindle speeds: max 6,000 rpm Tool changer: 60 tools Coolant through the spindle UAD/universal head 0.002/0.002 degrees Many additional options!

Condition: ready for operation (used), Year of construction: 1986, Available immediately from our location: Fully automatic milling machine, Busch Lhsde Aa Ik Sopfx Ah Son Type NF 8/32 Year of manufacture 1986 Groove width up to 32 mm Processing length up to 6100 mm Automatic material feed Automatic feed Drive power 5.5 kW Accessories: Support table Clamping devices, milling cutters Coolant system Digital display Weight 4 tons Price: EUR 2,500.00 plus VAT, ex works

Condition: used, machine/vehicle number: 2806-0743, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Travel distances X-axis travel: 800 mm Y-axis travel: 550 mm Z-axis travel: 500 mm Spindle quill travel: 80 mm Work table Table clamping area: 1,000 × 550 mm Spindle and tool holder Spindle speed: 0–5,000 rpm Tool holder: SK 40 Feed rate and rapid traverse Ljdpfj Aa A Hnsx Ah Sohn Feed rate: 2–6,000 mm/min Rapid traverse: 6.0 m/min Performance data Total power consumption: 12 kW Machine weight: approx. 3.9 t Dimensions Length: 2,200 mm Width: 2,800 mm Height: 2,400 mm EQUIPMENT No information on accessories available.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Machine type: Tool milling machine Manufacturer: Kunzmann Model: WF9 Year of manufacture: 1998 Control system: Heidenhain WORKING AREA Travel in X-axis: approx. 800 mm Travel in Y-axis: 500 mm Travel in Z-axis: 500 mm WORK TABLE Table dimensions: 1,200 × 600 mm Number of T-slots: 9 SPINDLE Tool holder: SK40 ELECTRICAL DATA Operating voltage: 400 V Frequency: 50 Hz Rated current: 25 A MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 2,500 mm Lhedj Ad Dqcepfx Ah Ssn Width: 1,500 mm Height: 2,000 mm Weight: 3,000 kg EQUIPMENT Heidenhain control system

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,000 mm, total length: 1,600 mm, total width: 1,600 mm, type of input current: three-phase, controller manufacturer: Union Dialog electronic control, compressed air connection: 6 bar, water pressure: 2 bar, Used 2018 Union MDMV 1 closed-circuit vacuum solvent degreaser, 50kg basket, Dialog control, Industrial Frigo chiller and 2 Safechem units. Manufacturer: Union Model: MDMV 1 Machine Type: Closed-circuit vacuum solvent metal degreasing / component cleaning machine Year: 2018 Condition: Excellent Includes: Industrial Frigo GR2A 30/Z industrial water chiller & 2 x SAFECHEM SAFE-TAINER chemical storage/handling units Machine Description Used 2018 Union MDMV 1 industrial metal degreasing and component cleaning machine, designed for precision cleaning of small and complex metal components using super-stabilised perchloroethylene (PCE / PER / tetrachloroethylene). This is a closed-circuit hermetic vacuum solvent cleaning system incorporating washing, rinsing, vapour degreasing, solvent recovery/distillation and vacuum drying within an enclosed process. Technical Specifications Maximum Basket Capacity: 50 kg Solvent Type: Perchloroethylene / PCE / PER / Tetrachloroethylene – C₂Cl₄ Solvent Load: Approx. 397 kg / 248 litres Main Electrical Supply: 400 V / 3 Phase / 50 Hz Installed Power: Approx. 23 kW Rated Current: Approx. 46 A Steam Pressure Requirement: Approx. 4–5 bar Compressed Air Requirement: Approx. 6–8 bar Water Pressure Requirement: Approx. 2–3 bar Floor / Ground Loading: Approx. 549 kg/m² Control: Union Dialog electronic control This particular machine also has a substantial integrated solvent-management system incorporating working and recovery tanks, solvent pump, fine filtration, swarf filtration, still/distillation system, condenser, heat exchanger, separator, decanter, vacuum pump and active-carbon treatment. Continuous Solvent Recovery A particularly useful feature of the MDMV design is the continuous solvent distillation/recovery system. Union states that MDMV machines operate under vacuum for rapid washing cycles and use continuous vacuum distillation with automatic final stripping of residues, allowing contaminated solvent to be regenerated and reused during production. Industrial Frigo GR2A 30/Z Chiller Included The machine is supplied with a 2018 Industrial Frigo GR2A 30/Z air-cooled industrial water chiller. Refrigerant: R407C Refrigerant Charge: Approx. 5 kg Electrical Supply: 400 V / 3 Phase / 50 Hz Rated Current: Approx. 23 A Nominal Water Pressure: Approx. 3.2 bar Temperature Set-Point Range: -10°C to +25°C Weight: Approx. 390 kg The complete installation includes: 2018 Union MDMV 1 metal degreasing machine 50 kg maximum basket capacity Union Dialog control Closed-circuit solvent cleaning system Vacuum cleaning/drying system Rotating / oscillating basket system Spray cleaning capability Immersion cleaning capability Solvent vapour degreasing Integral solvent distillation and recovery Working solvent tank Recovered-solvent / waiting tank Solvent circulation pump Fine solvent filtration Swarf filtration Vacuum pump Condenser Heat exchanger Water / solvent separation Decanter Active-carbon vapour treatment system Floor safety / spill-containment tank Lhodpfxoz Itlwe Ah Sen 2018 Industrial Frigo GR2A 30/Z industrial chiller 2 x SAFECHEM SAFE-TAINER chemical handling/storage units Stainless steel containment trays Use and maintenance handbook Electrical documentation Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith.

Condition: good (used), functionality: fully functional, Mikron WF 32 CH with Heidenhain TNC 355 Lodpfj Afacqox Ah Sshn

Condition: ready for operation (used), Year of construction: 1989, Available immediately ex-works: Tool milling machine MAHO Type MH 500 M Year of manufacture 1989 Heidenhain digital display Table 800 x 360 mm SK 40 Spindle speeds 63 – 4000 rpm Quill travel 50 mm Lodpfx As Aa Il Neh Sohn Travel distances X/Y/Z 500/380/350 mm Drive 3 kW Feeds 10 – 1000 mm/min Coolant system Weight 1600 kg Accessories: Hydraulic vice Price: Euro 2,500.00 plus VAT, ex-works.

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Lhsdpfx Aor Hr Arsh Ssn Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: used, Year of construction: 2013, Milling machines Travel distance X: 650 mm Travel distance Y :530 mm Travel distance Z: 600 mm Number of axis: 3 Lhodpfxj Adz Hho Ah Son milling machine / machining center Control: Heidenhain iTNC 620 spindle chuck: SK40 spindle revolutions: 9000 rpm Speed range to: 9000 U/min table size X: 850 mm table size Y: 560 mm tool changer: 30 - time Rapid traverse: 30 m/min chip conveyor control Heidenhain - Very good condition - Washdown gun - Electronic handwheel - Documentation / manual - Without clamping equipment - Inspection under power possible

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Ljdpfx Ahsxdmgvo Sshn Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: used, Year of construction: 1983, functionality: limited functionality, feed length X-axis: 1,700 mm, feed length Y-axis: 650 mm, feed length Z-axis: 700 mm, table width: 570 mm, table length: 2,000 mm, Oerlikon FM 3 CNC milling machine Heidenhain TNC 320 was used until recently for milling weld preparation edges Tool holder: SK 50 Lhodpfx Ajyp Dxuoh Son Loading possible with an overhead crane

Condition: ready for operation (used), Year of construction: 1989, Immediately available from training center: Universal Milling Machine Horizontal - Vertical WMW Auerbach Type FW 250 x 1000 / 2 Year of manufacture: 1989 Table: 1250 x 250 mm Table load capacity: 1250 kg Travel X/Y/Z: 700 / 400 / 500 mm Heidenhain 3-axis digital readout SK 40 Spindle speeds: 55 – 2800 rpm Feeds: 10 – 630 mm/min, stepless Vertical head Horizontal milling device Drive power: 6.3 kW Weight: 2.5 t Lhjdpfx Aho Aa Imgo Sjn Offered at EUR 2,000 – plus VAT, ex location

Condition: used, Year of construction: 1980, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: Universal bed-type milling machine Machine weight: approx. 11 tons Travel distances X-axis travel: 1,600 mm Y-axis travel: 800 mm Z-axis travel: 630 mm Spindle and tool holder Spindle taper: SK 50 Speed range: 20–2,000 rpm Horizontal milling spindle: SK 50 Vertical milling spindle: SK 50 Feed rate and rapid traverse Feed rate: 10–6,000 mm/min Rapid traverse: 6 m/min Work table Ledo Aa Ahrjpfx Ah Sjhn Table load capacity: max. 5,000 kg Control system Control system: Philips NC 6664 Axes: 4 Program memory: available Rotary table Rotary table: NC-controlled Diameter: 630 mm Electrical data Total power requirement: 18 kW Control cabinet Control cabinet dimensions: 1,800 × 530 × 2,000 mm Dimensions Space requirement: approx. 4.6 × 2.9 × 2.62 m EQUIPMENT NC-controlled rotary table Hydraulic tool clamping Coolant system Chip conveyor Horizontal milling spindle Vertical milling spindle Separate control cabinet Safety emergency stop

Condition: good (used), Year of construction: 1962, Spindle mounting, vertical + horizontal SK / ISO 40 Angular table clamping surface 700 x 285 mm X-axis travel 500 mm Y-axis 200 + approx. 250 mm Z-axis 400 mm Quill stroke approx. 80 mm 18 main spindle speeds 40 - 2000 rpm 18 feed speeds 8 - 400 mm/min rapid traverse 1200 mm/min drive power 2,2 kW dimensions L x W x H 1150 x 1050 x 1650 mm Machine weight 1000 kg Accessories / special features: - Vertical milling head, swiveling R/L - Fixed angle clamping table - Feed + rapid traverse in all axes Lhjdpfxem Uygve Ah Sjn Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Lhodo Ad Emxspfx Ah Ssn TECHNICAL DETAILS Control System CNC control: Siemens Sinumerik System 3 MACHINE DETAILS Machine dimensions Length: 2,500 mm Width: 2,000 mm Height: 2,400 mm Machine weight Weight: 2,000 kg

Condition: good (used), Year of construction: 1981, Table size 1300 x 400 mm Tool holder DIN 2080 ISO 40 Travel ranges X-axis, automatic/manual 1000 / 1020 mm Y-axis, automatic/manual 350 / 370 mm Z-axis, automatic/manual 430 / 450 mm Speed range, 2 steps 32 – 1400 rpm Quill in vertical milling head yes Milling head, swiveling ± 90° Feed range X/Y-axis, stepless 10 – 1000 mm/min Feed range Z-axis, stepless 4 – 400 mm/min Lhjdpfx Ahsd D Tf He Son Rapid traverse X/Y-axis 5 m/min Rapid traverse Z-axis 1.8 m/min Drive power, vertical + horizontal 3.2/4 kW Space requirement L x W x H 3200 x 2700 x 2200 mm Weight 2400 kg Accessories / Special features: • NC point-to-point control HEIDENHAIN TNC 131 S • RS 232 interface • Stepless feed • Automatic and/or manual operation possible • Safety devices / prompts to secure the hand crank when the X-Y and Z axes are moved manually, as well as the manual tool clamping • Vertical and horizontal milling spindle • Quill in vertical milling head • Hydraulic axis clamping • Central lubrication • Coolant system Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, total height: 2,000 mm, total width: 2,300 mm, total length: 2,000 mm, Year of manufacture: 1969 Colour: Grey Empty weight: 3.800 kg - Year: 1969 - Serial number: 9327 - Drive system: Conventional - Horizontal/vertical: Horizontal and vertical - Number of axes [pcs]: 3 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 420 - Z-axis travel [mm]: 710 - Table length [mm]: 1520 - Table width [mm]: 385 - Tool holder: ISO50 - Main spindle power [kW]: 11 - Min. spindle speed [rpm]: 25 - Max. spindle speed [rpm]: 2000 - Transport dimensions: 2000mm x 2300mm x 2000mm (l x w x h) - Transport weight [kg]: 3800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Lhjdpoyzhdmefx Ah Sjn VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum