Used Metal Stacker for sale (36,884)

Condition: good (used), functionality: fully functional, machine/vehicle number: 1719P, Year of construction: 2016, operating hours: 11,150 h, load capacity: 10,000 kg, lifting height: 18,800 mm, fuel type: diesel, motor manufacturer: Cummins, empty load weight: 39,510 kg, ID43982 MACHINE: Empty container handler BRAND: Hyster MODEL: H23XM-12EC YEAR OF CONSTRUCTION: 2016 Hjdpfsx Thpmex Addeng ENGINE: Diesel, Cummins TRANSMISSION: Automatic OPERATING HOURS: 11150 MAST: 2 Stages ATTACHMENTS: Spreader LIFT HEIGHT: 18800 mm CONDITION: Good

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 2,185 mm, total width: 670 mm, total height: 2,150 mm, overall weight: 1,090 kg, input voltage: 400 V, workpiece height (max.): 100 mm, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 200 mm, input current: 16 A, This machine is as good as new, has only been on display in the showroom, and was used as a demo model. Hedpfx Aex U D Dpoddsng The F200 XL is a 3-station machine and comes standard with the brush height tracking system developed by Q-Fin. Combined with its simple button interface, this ensures that setting up and operating the F200 is intuitive, resulting in the most user-friendly machine available on the market. The machine is equipped as standard with steplessly adjustable speed settings for both the conveyor and the brush(es) and/or grinding head(s), allowing for all possible machining processes and finishes to be achieved. You can determine your desired finish yourself. The F200 XL can be fitted with either a vacuum system (for non-ferrous metals, such as stainless steel and aluminum) or a magnet system (for ferrous metals), depending on your application. These systems ensure effective fixation of the workpieces on the conveyor table, allowing even smaller workpieces (from 10 x 10 mm with the magnet system) to be processed safely, easily, and quickly. At Q-Fin, we truly believe in a narrow machine for small workpieces and a wider machine for large workpieces. In many cases, the throughput speed of this machine is up to 5 times higher than comparable machines.

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Hsdpfx Aehmmfkjddjng Good condition

Year of construction: 2020, condition: good (used), Remmert LaserFLEX | Fully Automatic Loading and Unloading – Used - : Price ex location: now only €119,000 (net), previously €145,000 (net) plus dismantling, etc.! Manufacturer: Remmert Model: LaserFlex Year of manufacture: approx. 2020 Sheet format: 3015 Load capacity: 1,000 kg 220 kg/m² Maximum sheet dimensions: 3048 x 1524 mm Maximum sheet thickness: 25 mm SMART Control 4.0 Can be combined with a sheet metal storage system (storage system not included in the sale) Original price: €250,000 (net) Manufacturer description: Equipped with two automation units – a loading unit and an unloading unit – the LaserFLEX allows for the decoupling of loading and unloading processes in laser cutting systems. After cutting, a fork unit lifts the processed metal sheet from the change table, while simultaneously a new sheet is transported from the connected storage system via a vacuum unit. As soon as the sheet is positioned next to the laser machine, the system is loaded with the workpiece by the unloader. This entire process takes just one minute. With LaserFLEX, the downtime of integrated laser cutting systems is virtually eliminated, even high-speed laser processing is optimally supported. Key features: • Changeover times of approx. one minute (with 3015 format) • Highly automated production processes • Separate loading and unloading operations for the laser cutting machine • Manufacturer-independent integration of laser systems • Flexible storage options with tower or large-scale storage systems • Reduced downtime of the processing machine • Connection of multiple laser systems in a chained layout • Integration into existing warehouse and production environments • Intuitive, graphical touch operation with visual status management • Modern industrial design Hsdpfjwga E Tjx Addsng Fast, flexible solution for the automation of laser systems Increased productivity in laser processing Fastest sheet changeover time on the market Seamless integration into existing production environments Handling of any sheet formats Effective supply and removal for multiple laser systems Intuitive, graphical touch operation with visual status management Innovative, modern industrial design Condition: Good Available: Immediately Location: 46419 Isselburg

Condition: used, This listing is for the Gilson PIPETMAN P10 1-10uL Single Channel Pipette with Metal Ejector Colourcode Red The unit is in full working condition and is ready for immediate use The traditional “L” version: robust, bomb‑proof build, fully autoclavable stainless steel tip‑ejector, volume adjustable 1–10 µL. PVDF and stainless exterior, designed to be durable in tough lab setting Fully adjustable 1–10 µL range with fine decimal display Dual-position metal tip ejector supports D10 and DL10 tips Low pipetting resistance, especially in G-series (≈2 N force) PVDF body + stainless steel parts for chemic Hnsdpoxv Dt Dofx Addjg

Condition: good (used), Metal band saw, band saw machine, vertical band saw -Passage width: 380 mm -Passage height: 230 mm -Table: swiveling Hedpfx Asfiqrcoddsng -Speeds: 12 pieces min: 45 rpm max: 800 rpm -Dimensions: 1150/715/H1900 mm -Weight: 522 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: K10027, control type: CNC control, degree of automation: semi-automatic, throat depth: 1,000 mm, bending angle (max.): 140 °, Equipment: CE marking, emergency stop, foot remote control, Jorns Long Folding Machine for folding Sheet Metal I have operated this machine from new. It is a very capable and reliable machine made by Jorns of Switzerland who are known to be at the very top of their game. It is capable of folding 1.2mm in steel and 2mm in aluminium. The machine has a 1m insertion depth and four backstops which are adjustable. (there is an option to add more, but we never needed to.) The machine also has a slitter installed for slitting sheets along the full length of the machine to desired width. This is all controlled from the CNC. The machine was manufactured in 2010. It has the Jorns CNC50 control system which can be programmed with 100 different programs. The machine is very easy on power as all folding movements are hydraulicly driven. Hnedpfsx Ilx Iox Addjg Overall the machine is in extremely good condition and can be seen operating until Mid January. Machine comes with safety light curtains. Machine will be ready for collection middle/end of January. I would prefer buyer to collect but if delivery is necessary, it could be arranged as an extra charge. Machine is approx 8m long x 2m wide and weighs approx 7 Tonne. New Jorns machine forces sale.

Condition: used, Year of construction: 2023, functionality: fully functional, total length: 1,850 mm, total width: 670 mm, total height: 2,145 mm, overall weight: 1,090 kg, input voltage: 400 V, workpiece height (max.): 100 mm, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 200 mm, input current: 16 A, This machine has been used for several years. The machine has been inspected, tested, and operates 100% as intended. Hnodpfx Adox U Dx Hjdsg The F200 XL is a 3-station machine suitable for deburring, grinding, and/or edge rounding of small sheet metal parts. As its first processing station, this deburring machine features a grinding unit, followed by two combination brushes. The grinding belt removes burrs or provides the product with a fine linear finish. The brushes deliver the desired edge rounding and create a uniform finish on the surface. The F200 XL can be optionally equipped with a vacuum system (for non-ferrous metals, such as stainless steel and aluminium) or a magnetic system (for ferrous metals). These systems ensure effective fixation of the workpieces on the conveyor table, making it possible to safely, efficiently, and quickly process even the smallest workpieces (from 10 x 10 mm with the magnetic system). At Q-Fin, we are firmly convinced of the advantages of a compact machine for small workpieces. In many cases, the throughput speed of this machine is up to five times higher than comparable machines.

Condition: used, Hydraulic Plate Shear LVD Type HST-C 31 / 6 Machine No. 21348 Year of manufacture: 1994 Cutting length: 3,100 mm Hnsdpfxjtvb Iue Addjg Cutting thickness: 6.35 mm Backgauge: 770 mm Working height: 950 mm Hydraulic sheet hold-downs: 17 units Hydraulic tank capacity: 150 liters Motor power: 7.5 kW Power connection: 400 Volt, 50 Hz, 9.5 kW, 19 Amp. - Motorized backgauge with digital actual position display ELGO - Backgauge adjustment via push button – rapid in both directions and fine adjustment by jogging in the minus direction only - Sheet lifting device below the backgauge with pneumatic lifting cylinder - Continuously adjustable blade gap from 0.1 mm via handwheel with analog display - Cutting angle adjustment in 5 steps from 1.5° to 3.5°, electrically pre-selectable - Left side angle stop 1,500 mm - 2 table extensions as sheet supports - Electric foot switch - Comprehensive operating manual Space requirements without front table extension (L x W x H): 4,150 x 1,850 x 1,900 mm Space requirements with front table extension (L x W x H): 4,150 x 2,850 x 1,900 mm Weight: 5.5 tons Good condition Very good cutting results, including with thin sheet metal

Condition: good (used), Year of construction: 2014, operating hours: 188 h, Stacker forklift LINDE L14 duplex 300cm 188 hours 2014 Continuous stock available, see website. Prices are ex Nuland. Hnodpfx Adex Td E Dsdsg Van de Wert Trading B.V. maintains a changing inventory of machines, trucks, trailers, and attachments. All our deliveries are at trade prices and in AS-IS condition without any guarantees. (see our terms and conditions) For viewing and/or a test drive, you can make a non-binding appointment. Please call in advance as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, This listing is for the Gilson PIPETMAN P1000 100-1000uL Single Channel Pipette with Metal Ejector Hnjdpfx Ajxv Dtdeddjg The unit is in full working condition and is ready for immediate use Key Features & Specifications Volume Range: Fully adjustable from 100 to 1000 µL — ideal for a wide range of liquid handling needs Precision & Accuracy: Systematic (bias): at 100 µL ±3 µL, at 500 µL ±4 µL, at 1000 µL ±8 µL Random (precision): ≤0.6 µL at 100 µL, ≤1 µL at 500 µL, 1.5 µL at 1000 µL Construction: Built with durable PVDF and stainless steel components — trusted for reliability, robustness, and long lifespan Ergonomics: Designed for comfortable use with reduced pipetting forces to minimize hand fatigue during prolonged sessions Maintenance: Easy to dismantle with an autoclavable tip holder and ejector, ensuring convenient cleaning and decontamination Metal Tip Ejector: Durable metal ejector reduces tip ejection force and enhances longevity

Condition: good (used), Metal detector for conveyor belts, all-metal detection system, tunnel metal detector -Manufacturer: SS Temafa, Metal Detector All-Metal Detection System -Metal detector: SS TFX 4000/440 Hjdpfx Adjrz Syyedsng -Detector opening: Ø 440 x 530 mm -Control: Temafa MSG 4-FF -Individual components: see photos -Dimensions: 750/530/H790 mm -Weight: 96 kg

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 15,950 h, load capacity: 45,000 kg, lifting height: 14,700 mm, fuel type: diesel, drive type: Diesel, Full container reachstacker Load center: 1900 Condition: Limited operational readiness Technical condition: normal Front tire size: 18.00-33 Rear tire size: 18.00-33 Hnodpfx Adex Sz I Todjg 20-40 ft topspreader + piggy-back Hydraulic sliding cabin, central greasing, rear view camera

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total length: 2,150 mm, total width: 1,805 mm, total height: 2,320 mm, overall weight: 2,850 kg, input voltage: 400 V, input frequency: 50 Hz, power: 16 kW (21.75 HP), input current: 32 A, This machine is as good as new, has only been displayed in the showroom, and has served as a demonstration model. F800 – All-round Finishing Machine Hnjdpfxsx Uz Ilo Addjg Discover the advanced F800 finishing machine, equipped with an intuitive HMI touchscreen for effortless operation. This screen enables operators to easily switch between various finishing programs, ensuring high reproducibility of product quality and minimizing operational errors. Depending on the materials to be processed, you can choose a system with either vacuum or magnetic support. At the infeed side, burrs and irregularities are removed by a grinding unit, resulting in a smooth, burr-free surface. This is followed by four oscillating combination brushes that apply light pressure. The brushes deliver uniform edge rounding on all edges and holes, both around and within the ground product, resulting in optimal finishing quality. The F800 features automatic brush calibration to guarantee consistent precision, as well as full ERP control, ensuring seamless integration into automated production environments. In short, this is a finishing machine fully prepared for the future!

Year of construction: 1999, condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 1 to 30 mm Hedpfx Aodi Sl Ijddsng -Load capacity: 2000 kg -Number: 1x terminal available -Weight: 10 kg

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 1,795 mm, total width: 2,210 mm, total height: 1,085 mm, overall weight: 1,400 kg, input voltage: 400 V, workpiece height (max.): 150 mm, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 1,200 mm, input current: 16 A, This machine has been in use for several years. The machine has been inspected, tested, and operates 100% as intended. Hnsdpfx Ajx Ux Rwjddeg Slag removal is a labor-intensive task, often still performed using a hammer and chisel. Alternatively, an electrically powered hand tool is used. Due to the heavy workload during operation, both for the operator and the hand tools, these hand tools require frequent replacement. This results in high costs, additional waste streams, and potential health issues for the operator. Manual slag removal is time-consuming and burdensome for both the operator and the equipment, leading to increased costs and wear. The DS600 and DS1200, specially developed by Q-Fin, automatically remove slag after plasma or oxy-fuel cutting. These machines can be easily integrated into any production line, ensuring slag is removed before the product reaches the deburring machine for edge rounding. The removed residual material is collected in a bin and can be disposed of as scrap. By carrying out slag removal separately, contamination in the deburring machine is prevented. Both models are ergonomically designed and feature touchscreen controls for ease of use. Slag is effectively removed by two counter-rotating slag hammer rollers, which strike the product twice per revolution. The result is a flat product ready for further finishing.

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper Hodpfxsb A S A Es Addong -Sheet metal claws -Span: 0 to 55 mm -Load capacity: 9000 kg -Number: 2x terminals available Price: per piece -Weight: 28 kg/piece

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper Hnedpfx Adedkbgfedeg -Sheet metal claws -Span: 0 to 20 mm -Load capacity: 1000 kg -Number: 1x terminal available -Weight: 10 kg

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws with plastic insert -Span: 10 to 25 mm -Load capacity: 1,000 kg Hnjdsdg Snlepfx Addeg -Number: 1x terminal available -Weight: 20 kg

Condition: excellent (used), Metal band saw blade, band saw blade -unused original packaging -Number: 5x sheets available -Price: per piece Hnsdpfsb A H Eljx Addsg -Toothing: 5/8 ZpZ W -Dimensions: 2950 x 27 x 0.9 mm -Weight: 0.6 kg

Condition: excellent (used), Metal band saw blade, band saw blade -unused: original packaging Hjdpfx Adeb A Inwedong -Number: 6x sheets available -Price: per piece -Toothing: 4/6 -Dimensions: 4400 x 34 x 1.1 mm

Condition: good (used), Carrier claw, sheet metal clamp, sheet metal claw, carrier clamp, sheet metal gripper, material gripper, material gripper, plate gripper, lifting claw, lifting clamp, screw clamp -Manufacturer: Seebeck, sheet metal clamp screw clamp type 76 -Clamping range: 8-32 mm -Load capacity: 8 t -Quantity: 1x clamps available -Dimensions: 275/80/H300 mm -Weight: 30 kg Hnodop A A Rvopfx Addjg

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws Hnodeb A Swaepfx Addjg -Span: 0 to 50 mm -Load capacity: 9000 kg -Weight: 32 kg

Condition: good (used), Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Pehaka, Vertical band saw USF-5R -Drive: 3 kW -without brakes, removed -Cutting width: max. 500 mm -Cutting height: max. 400 mm -Saw blade: Length 3850 to 4050 mm -Saw blade speed: stepless -Work table: swiveling -Accessories: including additional band saw blades (see photos) Hsdpfx Adslf Tqujdjng -Dimensions: 1300/910/H2140 mm -Weight: 625 kg

Condition: good (used), Stacking boxes, stacking boxes, steel boxes, euro stacking boxes, transport basket, stacking basket, euro stacking containers, euro stacking containers, small load carriers Hnsdpfofkv Scox Addsg -Sheet metal container with: lid -Dimensions: 615/800/H910 mm -Weight: 54 kg