Used Mfh 5000 for sale (2,158)

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 650 mm, area performance: 3,300 m²/h, warranty duration: 24 months, tank capacity: 85 l, total height: 1,170 mm, total width: 660 mm, total length: 1,300 mm, water tank capacity: 95 l, empty load weight: 229 kg, We offer for sale a brand new IXSA X8 Ride-On Scrubber Dryer. Device warranty: 24 months Iodpfx Agjx U T E Ne Ujth Battery warranty: 60 months Technical Specifications: • Working width: 650 mm • Productivity: 3,300 m²/h • Brush diameter (quantity): 330 mm (2) • Squeegee width: 1,020 mm • Recovery tank: 95 l • Solution tank: 85 l • Rated power: 1,350 W • Maximum slope: 10% • Vacuum motor power: 24V / 500W • Brush motor power: 24V / 2x300 W • Maximum speed: 8 km/h • Brush pressure: 2.8 MPa • Brush speed: 180 rpm • Pad diameter: 13'' • Vacuum: 188 mbar • Noise level (EN 60704): 63 dB(A) • Dimensions (L x W x H): 1,300 x 660 x 1,170 mm • Weight (without battery): 229 kg • Lifepo4 batteries: 24V 200Ah. Working time: approx. 7 h • Batteries can be opportunity-charged Standard equipment for the scrubber dryers offered includes: • Neodymium disc brushes – magnetically mounted • Pad holder • LifePro batteries with extended cycle life and longer runtime compared to standard gel batteries • Charger • Squeegee blades made from Linatex material Why choose IXSA? ✅ Durability – minimal electronic components for increased reliability and long service life ✅ 5-year lithium-ion battery warranty – exceptional in the industry, confirming top durability and reliability ✅ Significantly higher charge cycle count vs. gel batteries (700 vs. 5,000 cycles) and longer runtime – IXSA batteries offer more efficient operation and lower replacement costs in the long term ✅ Magnet-mounted brushes – quick and easy installation/removal ✅ Long battery runtime with short charging times ✅ Premium quality American LINATEX squeegee blades ✅ Dual suction system – perfectly dry floors immediately after cleaning ✅ Neodymium brushes – state-of-the-art technology for better cleaning performance and longer service life ✅ High surface efficiency – saving time and reducing operating costs ✅ Robust construction, low operating costs – built for intensive, professional use ✅ Ergonomic, intuitive operation – user-friendly design and controls

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 530 mm, area performance: 2,500 m²/h, warranty duration: 24 months, tank capacity: 52 l, total height: 1,090 mm, total width: 550 mm, total length: 1,270 mm, water tank capacity: 48 l, empty load weight: 154 kg, We offer for sale a New IXSA X6 Scrubber-Dryer. Warranty on the machine – 24 months Warranty on batteries – 60 months Technical data: • Scrubbing width: 530 mm (20 inches) • Squeegee width: 790 mm • Dimensions: L1270 x W550 x H1090 mm • Solution / recovery tank capacity: 48 / 52 L • Vacuum motor: 370 W • Brush motor: 500 W • Productivity: 2,500 m²/h • Net weight: 154 kg • Working speed: 0–5 km/h • Semi-automatic drive • Battery charging time – approx. 4 h (80% charge in 2 h) • Battery runtime – approx. 4 h • Battery life – 5,000 cycles • Battery can be recharged at any cycle Standard equipment included with the scrubber-dryer: • Neodymium disc brushes – magnet-mounted • Pad holder • LifePro batteries featuring increased cycle count and longer runtime compared to standard Gel batteries • Charger Iedpfx Ajx U Tvusg Ueth • Squeegee blades made of Linatex material Why choose IXSA? ✅ Durability – minimal electronic components for extended trouble-free operation ✅ 5-year warranty on lithium-ion batteries – unique in the industry, confirming highest durability and reliability ✅ Significantly higher charging cycles compared to gel batteries (5,000 vs. 700 cycles) and longer operating times – IXSA batteries provide more efficient use and lower long-term replacement costs ✅ Magnetic brush mounting – easy to install and remove ✅ Long battery runtime with short charging times ✅ Top-quality American LINATEX squeegee blades ✅ Dual suction system – leaves floors perfectly dry immediately after cleaning ✅ Neodymium brushes – modern technology for superior cleaning results and longer lifetime ✅ High productivity – save time and reduce operating costs ✅ Sturdy construction, low operating costs – suitable for intensive, professional applications ✅ Ergonomic and intuitive operation – user comfort with simple controls

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 530 mm, area performance: 3,000 m²/h, warranty duration: 24 months, tank capacity: 60 l, total height: 1,090 mm, total width: 550 mm, total length: 1,270 mm, water tank capacity: 65 l, empty load weight: 154 kg, We offer for sale a New Scrubber-Dryer with traction – IXSA Model X7T Device warranty – 24 months Battery warranty – 60 months Technical specifications: • Scrubbing width: 530 mm (20 inches) • Squeegee width: 790 mm • Dimensions: L1270 × W550 × H1090 mm • Solution / recovery tank capacity: 60/65 L • Vacuum motor: 370 W • Brush motor: 500 W • Cleaning capacity: 3000 m²/h • Net weight: 154 kg • Working speed: 0–5 km/h • Semi-automatic drive • Battery charging time – approx. 4h (2h to 80%) • Battery operating time – approx. 4h • Battery lifespan – 5000 cycles • Option for opportunity charging Standard equipment included with the listed scrubber-dryer: • Neodymium disc brushes – magnetic mounting • Pad holder • LifePro batteries offering extended cycle life and longer runtime compared to standard Gel batteries • Charger • Linatex squeegee blades Why choose IXSA? ✅ Durability – minimal electronics used in the device ensures extended reliability and reduced risk of failure Itedpfx Agex U Ty Hs Ueh ✅ 5-year warranty on lithium-ion batteries – unmatched in the industry, confirming highest durability and reliability ✅ Greater number of charge cycles compared to gel batteries (700 vs. 5000 cycles) and longer operating time – IXSA batteries allow for more efficient use and lower long-term replacement costs ✅ Magnetically mounted brush – easy installation and removal ✅ Long operating time with short charging cycles ✅ Highest quality American LINATEX squeegee blades ✅ Dual vacuum system – perfectly dry floors immediately after cleaning ✅ Neodymium brushes – advanced technology for superior cleaning results and longer lifespan ✅ High surface productivity – saves time and reduces operational costs ✅ Robust construction, low maintenance costs – equipment designed for intensive, professional use ✅ Ergonomic and intuitive operation – user comfort and straightforward controls

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,356 h, load capacity: 4,500 kg, lifting height: 5,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,500 mm, gearing type: hydrostat, fork carriage width: 1,250 mm, fork length: 1,250 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200X50-10, rear tire type: cushion tires (black), rear tire size: 250-15, overall weight: 11,440 kg, empty load weight: 6,940 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,250 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, HUBTEX DQ45G – 2017 | 1365 hours | LPG | DUPLEX 5000 mm | FORK POSITIONER Ready for use from day one – no investment, no risk ✅ Why choose this forklift? Need a machine that won’t disrupt your workflow? ⚙️ This HUBTEX DQ45G is fully serviced and ready for immediate operation – no hidden costs. ✔️ Full service (oils, filters, complete inspection) ✔️ Condition: like new ✔️ Only 1365 operating hours Itodpfxezff Sto Ag Ueh ✔️ New tyres – no additional investment required Key Specifications 🔹 Capacity: 4,500 kg 🔹 Drive: LPG 🔹 Mast: Duplex – 5,000 mm 🔹 Fork positioner: 1,250 mm 🔹 Forks: 1,250 mm 🔹 Cabin: fully enclosed, heated Technical Data 🔹 Year: 2017 🔹 Hours: 1,365 🔹 Weight: 6,940 kg 🔹 Load centre: 600 mm Mast & Lifting 🔹 Duplex mast 🔹 Lifting height: 5,000 mm Dimensions 🔹 Height: 2,600 mm 🔹 Length: 2,500 mm 🔹 Width: 2,250 mm Chassis 🔹 Superelastic tyres (100%) – new Equipment 🔹 Heated full cabin 🔹 Fork positioner 🔹 Lighting Condition ✔️ Technical: 5/5 ✔️ Visual: like new Perfect for 🏭 Narrow aisles 🌲 Timber/steel industry 📦 Long loads 🌍 Indoor & outdoor applications What you receive ✔️ Fully tested machine ✔️ Ready for immediate use ✔️ Online demonstration available ✔️ Delivery to your location Delivery & Service 🚛 Europe-wide transport 📦 Comprehensive logistics support 💼 Leasing options available 🔧 After-sales support Why FT LOGISTICS? ✔️ 100+ machines in stock ✔️ In-house service team ✔️ Extensive European experience ✔️ Trusted by numerous clients FT LOGISTICS – Forklifts that get the job done.

Year of construction: 2019, condition: like new (used), machine/vehicle number: 1810001-01, DARTEK TAR 1200/5000 VIBRATORY SCREEN, designed for the efficient classification and separation of bulk materials in industrial recycling and material processing applications. The unit is equipped with a separation system consisting of a bar screen (finger screen) and a mesh screen, allowing for flexible separation in multiple stages. Itodpfxozcm T Uo Ag Ush • Type: Vibratory screening system • Configuration: Finger screen (bars) + mesh screen • Application: Size-based classification and separation of mixed bulk materials • Status: Available for inspection • Current condition: In industrial condition (or disassembled/stored, if applicable) The system is designed for high-capacity screening operations, enabling efficient separation of materials according to their size and type. The finger screen is suitable for coarse separation and handling of bulky or irregular materials, while the mesh screen allows for finer classification of smaller particles. The vibratory system ensures a constant flow of material and optimal screening efficiency, reducing blockages and improving performance in demanding recycling and sorting environments. The equipment is suitable for recycling plants, quarries, and material recovery facilities where reliable and continuous screening performance is required.

Condition: ready for operation (used), functionality: fully functional, The Tecno Fluss VM 5000, manufactured in 2003 and identified by serial number 913, is an ideal solution for automating the dispensing of liquid or semi-solid products. This versatile model facilitates the precise dosing of various creams, sauces, and pastes. Furthermore, its ergonomic design reduces manual intervention, thereby increasing production rates. Furthermore, the intuitive operation of the Tecno Fluss VM 5000 allows operators to easily adjust parameters, ensuring a consistent flow. Each portion remains uniform, even at high production rates. Furthermore, the use of stainless steel components enhances its robustness and simplifies maintenance. As a result, this machine helps reduce the risk of contamination while extending its lifespan. Furthermore, the robustness of this dispenser meets the rigorous standards of the food industry. In addition, its compact design facilitates its integration, whether in a confined space or within a complete production line. In short, the Tecno Fluss VM 5000 represents a strategic investment to improve dosing accuracy, increase productivity, and reduce operational costs. This ensures consistent quality and significant time savings in your manufacturing processes. Isdswdv Ryjpfx Ag Ujth Technical specifications: Adjustable production speed to accommodate high throughput Stainless steel construction to maintain optimal hygiene Intuitive control for simplified use Dosing system suitable for liquid and semi-solid products Estimated power: approximately 3 kW depending on configuration OWYSnISl

Condition: used, Year of construction: 2011, Pallet: 500 x 500 mm X: 730 mm Y: 730 mm Z: 740 mm Maximum detail size: Ø 800 x 1000 mm Max load capacity: 700 kg Spindle speed: 12 000 r/min - High-torque Spindle effect: 22/30 kW , 300 Nm (AC40HP) CAT 40 Tool changer: 40 positions Interface for coolant system Prepare for probe OMP60 Iedpey H Dnxsfx Ag Uoth Cromar conveyor Synchronised tapping G00 slope constant EIA EIA 3D COMP Scaling included loading of machine included tools and cubes Mazak HC Nexus 5000-II: LxWxH: 475 x 238 x 285 cm Pallet: 500 x 500 mm X: 730 mm Y: 730 mm Z: 740 mm Max load capacity: 700 kg Tool changer: 40 positions

Condition: ready for operation (used), Suitable for twist-off caps Isdpfxoy A Tk Io Ag Ueth Suitable for screw caps Capacity: up to 30,000 caps per hour Magnetic elevator belt

Condition: like new (used), Year of construction: 2024, Traverses XYZ: 625 x 450 x 400mm, 500 x 450mm diameter table, max table weight 400kg, Itsdpfxeyia T So Ag Ush maximum workpiece size 550mm dimeter x 450mm high, B axis table tilt +30°, -110°, C axis 360degrees, 18.5kW, 12000rpm, BT40, 24 pallets 120 station tool changer, Fanuc I series control, swarf conveyor,

Condition: used, Year of construction: 2004, functionality: fully functional, Well used Sunnen honing machine with Felsomat loading system. Diameter range (INSIDE Ø)¹: Krossgrinding® tools: 5.46 to 32 mm when loaded with CGT tools TurboHone® tools: 3.81 to 32 mm when loaded with MMT tools Connecting rod tools: 53.8 to 63.8 mm when fitted with CRT tools Larger tools: 25.4 to 101.6 mm Workpiece²: 8 to 150 mm Max. Workpiece weight: 2.0 kg Spindle speed range: 250 to 3,700 rpm, adjustable Standard speed: High torque in the low speed range: 20 to 1,000 rpm, adjustable Stroke speed range: 33 to 500 H/min, adjustable Coolant system Pump motor: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l and 11.2 l/min Coolant requirements: Compressed air requirements: 566 l/min at 4.48 bar, 5.52 bar is recommended Temperature range: 0° to 35° C Floor space requirements: (concrete floor) At least 150 mm thick Itodpoud Nm Rjfx Ag Uoh Machine dimensions: L 2946 mm x W 2971 x H 1829 Color: Pearl grey with pewter grey and burgundy decorative stripes Stand weight: 1,579 kg Noise emissions: < 71 dB (A) continuous load, < 75 dB (A) peak load Special features: Automatic set-up: spindle speed, stroke speed, stroke length, infeed value and sparking Automatic finishing: Standard Machine operating modes Automatic: Manual: Series production Individual production Clamping optional

Year of construction: 2018, condition: excellent (used), Used Fagor 2500ton hydraulic h frame press for sale FAGOR H4-2500-5000-3000 2500 ton YOM: 2018 Moving Bolster Table Size: 5000 x 2500 mm Die Cushion in Table: 600 to stroke: 400 mm Die Cushion in Ram: 350 to stroke: 200 mm Manufacturer: Model: Controls: PLC SIEMENS Simatic TouchControl Manufact. year: 2018 Press Design frame design H-frame Openings in uprights yes Moving bolster yes Press forces Total force (nominal) 2500 to Press Table Clamping surface (left-right) 5000 mm Clamping surface (front-back) 3000 mm Table height over floor 820 mm Ram Clamping surface (left-right) 5000 mm Clamping surface (front-back) 3000 mm Stroke 1800 mm Ram (hydraulic press) Number of main-cylinders 4 Approximation velocity max. 490 mm/s Working velocity max. 17 mm/s Return velocity max. 250 mm/s Cushion in ram Force of cushion 350 to Stroke 200 mm Clamping surface (left-right) 4300 mm clamping surface (front-back) 2500 mm working principle hydraulical regulated yes page 2 of 2, Stock No.: 7-46523 Die Cushion (table cushion) force of cushion 600 to stroke 400 mm clamping surface (left-right) 4320 mm Isdpfx Aoifkldjg Ueth clamping surface (front-back) 2700 mm working principle hydraulical regulated yes Tool Assembly Dimensions Distance between columns (H-frame) 5050 mm Tool Assembly Dimensions Distance table – ram max. 2700 mm Electrical specifications Total power consumption 565 kW Mains voltage 400 V Mains frequency 50 Hz Dimensions / weights Height above floor level 10750 mm total weight approx. 500000 kg Light barrier yes Hydraulic overload protection yes This FAGOR machine was manufactured in 2018 and commissioned in 2019 and was only used sporadically after that. The condition can be described as new. Description of condition – Hydraulic press equipped with: – front moving bolster, – draw cushion in the table – cushion inside the ram, – 16 hydraulic tool clamping units, – two hydraulic cylinders for ” out of center pressure ” compensation – Siemens HMI touch control, – ideal for tryout of tools. – max. rapid speed of ram 490 mm/sec – ram and table deflection accuracy 0,125 mm/m.

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 Iedsr Nfvmopfx Ag Usth P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: excellent (used), mileage: 38,265 km, first registration: 04/1980, fuel type: diesel, fuel: diesel, driver cabin: day cab, gearing type: automatic, number of gears: 8, Year of construction: 1980, Transmission: S8, 8-speed, automatic Number of cylinders: 6 Gross weight: 19,000 kg Body manufacturer: ZF Emission class: Euro 0 Contact Vitali Lenda for further information. Itedpfx Ajy D Al Dog Ush

Condition: used, Year of construction: 2014, Duplo booklet maker System 5000 offer consists of: - 2x collators DC-10/60 - lifting unit LUL-HM - bookletmaker DBM-500 - trimmer DBM-500T - preset kicker DBM-K - conveyor DBM-400LS Duplo System 5000 booklet maker 2xDC-10/60: collator - number of bins: 20 - paper size: width: min. 120mm, max. 350mm length: min. 148mm, max. 500mm - paper weight: 0-300g/sqm - loading volume: 60mm - feeding system: belt suction feed system - conveyance system: roller belt conveyance system - power supply: 120 to 240 V 50/60 Hz - power consumption: 9.5A (120 V 60 Hz), 4.5A(220-240V, 50Hz) DBM-500: stitcher folder Itsdpfx Ageymx Tbo Uoh - paper size: min. 120x170mm; max. 350x500mm - process speed: >5000 pcs/h, A5 >4600 pcs/h, A4 >4000 pcs/h, A3 - No. of stitches 0 to 2 - stitch thickness within 5mm - wire diameter #25 to #27 - folding capacity: below 25 sheets - dimensions: 2,230 (W) x 865 (D) x 1300 (H) - ratings: 120 to 240 V 50/60Hz 6.5-3.8A - weight: 412kg DBM-500T: Trimmer - booklet size: min. 85x120mm; max. 250x356mm - trimmed booklet size: min. 75x120mm - speed: ut to 5000 sets per hour - power consumption: 120V 690Hz 10A - dimensions: 700mm x 635mm x 1094mm - weight: 532 lbs (241kg) We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Year of construction: 2007, condition: ready for operation (used), A heavy-duty pre-screening unit ABR for the mining industry for separating aggregates is available. Inclination: 15°, screen area X/Y: 5000mm/2000mm, number of decks: 1, screen area: 10m², machine dimensions X/Y/Z: approx. 5500mm/2400mm/1500mm, weight: approx. 10000kg. Without a screen. An on-site inspection is possible. Itsdpfxsy R Dtps Ag Uoh

Condition: good (used), Year of construction: 2003, functionality: fully functional, 1.High-Speed Planer/Moulder WACO MAXI 8 spindles for horizontal splitting, feed speed 20-150 m/min Working width planing: 30-300 mm Working height planing: 10-150 mm Cutting circle- 180-260 mm Operating voltage: - 400 Volts, 50 Cycles Main feed motor - 37 kW Frequency concerter - 45 kW 1.Bottom head - 24,5 kW 2.Top head - 30 kW 3.Right side head - 18,5 kW 4.Left side head - 30 kW 5.Right side head -18,5 kW 6.Left side head - 24,5 kW Itsdszc I Dbepfx Ag Uoh Horizontal splitting: 7.Right side head - 53 kW 8.Left side head - 53 kW Max working width 200 mm Max working height 63 mm Max saw blade diameter 300 - 400 mm Spindle diameter 50 mm Vertical adjustability 10 mm Spindle speed 5.500 v/min Exhaust connection 2 x Æ 160 mm Unit lenght 1300 mm 2. High-Speed Planer/Moulder WACO MAXI 3 spindles for finishing, feed speed 30-300 m/min Main feed motor - 37 kW Frequency converter - 45 kW Feed speed, variable: 30-300 m/min 1.Beading head: 24,5 kW 2.Top head 24,5 kW 3.Rotaplan head 30 kW

Condition: new, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, electrical fuse: 35 A, welding current at 60% duty cycle: 420 A, welding current at 100% duty cycle: 360 A, input current: 44 A, protection type (IP code): IP23, welding current (min.): 10 A, welding current (max.): 500 A, input frequency: 60 Hz, We are offering this new Fronius TransSteel 5000 PULSE welding machine. Manufacturer: Fronius Model: TransSteel 5000 PULSE Part number: 4.075.229 Serial number: 31239039 Standard: IEC 60974-1/-10 Cl.A Protection class: IP 23 Rated input voltage: 380/400 V Alternative input voltage: 460 V Mains frequency: 50-60 Hz Mains current I1 max (380/400 V): 44 A Mains current I1 eff (380/400 V): 28 A Mains current I1 max (460 V): 38 A Mains current I1 eff (460 V): 24 A Fuse size: 35 A Welding current range: 10–500 A Welding voltage range: 14.5–39.5 V Duty cycle 40%: 500 A Welding voltage at 40% duty cycle: 39.0 V Duty cycle 60%: 420 A Welding voltage at 60% duty cycle: 35.0 V Duty cycle 100%: 360 A Iedpfezbvp Nex Ag Uoth Welding voltage at 100% duty cycle: 32.0 V If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,877 h, functionality: fully functional, machine/vehicle number: NH501CD0388, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 730 mm, controller model: Fanuc MGS-501, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 650 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 730 mm Rapid traverse rate, X-axis: 50 m/min Rapid traverse rate, Y-axis: 50 m/min Rapid traverse rate, Z-axis: 50 m/min Maximum workpiece height: 900 mm Maximum workpiece diameter: 730 mm Maximum workpiece weight: 500 kg Table dimensions: 500 x 500 mm Table load capacity: 500 kg Maximum spindle speed: 8,000 rpm Distance from table center to spindle nose: 100 mm Number of spindles: 1 Torque: 302 Nm Isdpfx Ajzcla Hsg Ueth Number of tool positions in the tool magazine: 60 Tool length: 500 mm Tool diameter: 120 mm Tool weight: 30 g Tool holder type for turret 1: ISO 50 MACHINE DETAILS Control system: Fanuc MGS-501 Rated apparent power: 73 kVA Input voltage: 380 V Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,900 x 2,595 x 2,770 mm Total weight: 13,200 kg Operating hours (according to diagram): 28,877 h Power-on time (according to diagram): 94,850 h EQUIPMENT CE marking Documentation/Manual Spindle speed infinitely adjustable Chip conveyor

Condition: good (used), Year of construction: 2004, functionality: fully functional, Punching force: 220 kN Sheet thickness: 8 mm Working area: 2535x1280 mm Sheet thickness for stainless steel: 4-6 mm Accessories: Ijdpfx Ageyrcycj Uoth - Tool change cassettes - Table with ball rollers - Operating hours: 97,000

Condition: excellent (used), 1 tower DC 10/60 Isdpjvttxhefx Ag Ueth DBM 500 DBM 500 T

Condition: excellent (used), Duplo System 5000 Itjdpfextwyxox Ag Ush Year 2007 Trimmer DBM 500 2xDC 10/60

Condition: excellent (used), Year of construction: 2003, CNC machining center MORI SEIKI NH 5000/40 2003 Iedpfx Agovuql Ue Usth Technical data: x-travel 630 mm y-travel 600 mm z-travel 670 mm Tool holder BT 40 Spindle speeds - continuously variable 14000 rpm Pallet change with rotary indexing table 360x1 degree 2 Max. workpiece weight 500 kg Tool change device 60-way Table size 500 x 500 mm Total power requirement 56 kW

Condition: used, Year of construction: 2009, greates pass round over bed 1050 mm dist. between centers 6000 mm centre height 520 mm turning length 4810 mm workpiece weight max. (main spindle) 6000 kg Maximum workpiece weight with steady rests 8000 kg max. torque on the spindle 12500 Nm number of spindle speeds 2,8-560 1/min feed per revolution 0,08-56 mm chuck diameter 630 mm Maximum travel distance of the longitudinal slide 4810 mm Maximum travel distance of the cross slide (suppor 530 mm Maximum travel distance of the tool slide (support 340 mm Tailstock quill diameter 150 mm total power requirement 31 kVA weight of the machine ca. 10500 kg dimensions of the machine ca. 7860 x 1970 x 1480 mm Equipment/accessories: -2 x face plates -3 jaw chucks -2 x steady rests -Multifix holder Ijdoygxy Uepfx Ag Usth -Turning tools -Various tips -Technical documentation

Condition: used, Year of construction: 2010, Duplo booklet maker System 5000 offer consists of: - 2x collators DC-10/60 - lifting unit LUL-HM - bookletmaker DBM-500 - trimmer DBM-500T - preset kicker DBM-K - conveyor DBM-400LS Duplo System 5000 booklet maker 2xDC-10/60: collator - number of bins: 20 - paper size: width: min. 120mm, max. 350mm length: min. 148mm, max. 500mm - paper weight: 0-300g/sqm - loading volume: 60mm - feeding system: belt suction feed system Isdpfex Ir Ensx Ag Usth - conveyance system: roller belt conveyance system - power supply: 120 to 240 V 50/60 Hz - power consumption: 9.5A (120 V 60 Hz), 4.5A(220-240V, 50Hz) DBM-500: stitcher folder - paper size: min. 120x170mm; max. 350x500mm - process speed: >5000 pcs/h, A5 >4600 pcs/h, A4 >4000 pcs/h, A3 - No. of stitches 0 to 2 - stitch thickness within 5mm - wire diameter #25 to #27 - folding capacity: below 25 sheets - dimensions: 2,230 (W) x 865 (D) x 1300 (H) - ratings: 120 to 240 V 50/60Hz 6.5-3.8A - weight: 412kg DBM-500T: Trimmer - booklet size: min. 85x120mm; max. 250x356mm - trimmed booklet size: min. 75x120mm - speed: ut to 5000 sets per hour - power consumption: 120V 690Hz 10A - dimensions: 700mm x 635mm x 1094mm - weight: 532 lbs (241kg) We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,356 h, load capacity: 4,500 kg, lifting height: 5,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,500 mm, gearing type: hydrostat, fork carriage width: 1,250 mm, fork length: 1,250 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200X50-10, rear tire type: cushion tires (black), rear tire size: 250-15, overall weight: 11,440 kg, empty load weight: 6,940 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,250 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, HUBTEX DQ45G – 2017 | 1365 hours | LPG | DUPLEX 5000 mm | FORK POSITIONER Ready for use from day one – no investment, no risk ✅ Why choose this forklift? Need a machine that won’t disrupt your workflow? ⚙️ This HUBTEX DQ45G is fully serviced and ready for immediate operation – no hidden costs. ✔️ Full service (oils, filters, complete inspection) ✔️ Condition: like new Itedpfx Aszccdieg Ueh ✔️ Only 1365 operating hours ✔️ New tyres – no additional investment required Key Specifications 🔹 Capacity: 4,500 kg 🔹 Drive: LPG 🔹 Mast: Duplex – 5,000 mm 🔹 Fork positioner: 1,250 mm 🔹 Forks: 1,250 mm 🔹 Cabin: fully enclosed, heated Technical Data 🔹 Year: 2017 🔹 Hours: 1,365 🔹 Weight: 6,940 kg 🔹 Load centre: 600 mm Mast & Lifting 🔹 Duplex mast 🔹 Lifting height: 5,000 mm Dimensions 🔹 Height: 2,600 mm 🔹 Length: 2,500 mm 🔹 Width: 2,250 mm Chassis 🔹 Superelastic tyres (100%) – new Equipment 🔹 Heated full cabin 🔹 Fork positioner 🔹 Lighting Condition ✔️ Technical: 5/5 ✔️ Visual: like new Perfect for 🏭 Narrow aisles 🌲 Timber/steel industry 📦 Long loads 🌍 Indoor & outdoor applications What you receive ✔️ Fully tested machine ✔️ Ready for immediate use ✔️ Online demonstration available ✔️ Delivery to your location Delivery & Service 🚛 Europe-wide transport 📦 Comprehensive logistics support 💼 Leasing options available 🔧 After-sales support Why FT LOGISTICS? ✔️ 100+ machines in stock ✔️ In-house service team ✔️ Extensive European experience ✔️ Trusted by numerous clients FT LOGISTICS – Forklifts that get the job done.