Used Mikron Vce 1000 for sale (176)

Condition: good (used), Year of construction: 1972, max. wheel diameter 80 mm gear width 60 mm max. module 3 min. module 0,1 Blsdpfx Aow N S D Soacep total power requirement 0,4 kW weight of the machine ca. 120 kg dimensions of the machine ca. 0,6x0,6x0,75 m

Condition: ready for operation (used), Year of construction: 2008, operating hours: 3,825 h, functionality: fully functional, machine/vehicle number: 214.84.70.265, MIKRON HSM 400 U from 2008, very few operating hours Bledpfxsxg Rvye Aacjp

Condition: good (used), Year of construction: 2016, Traverses XYZ: 800 x 800 x 550mm, 500 x 500mm table, Bljdpfxewq A Rge Aacsp A axis -91 / + 121 degrees, C axis , 360 degrees, Heidenhain TNC530, Spindle Speed 20000rpm, 36kW Spindle Motor, HSK A63 Spindle Taper, 60 tools, swarf conveyor.

Condition: good (used), Year of construction: 2002, Machine is in good condition. Bsdetwpamspfx Aacelp Parts shown by hand not come.

Condition: used, Year of construction: 2001, Technical data: Tool holder: SK 40 Travels: X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Max. Tool weight: 260 kg Spindle speed: 12000 1/min Max. Table load: 380 kg Bjdpfx Aast Hr Ahscslp Weight, approx.: 6500 kg Dimensions (DxWxH), approx.: 2000 x 2200 x 2400 mm Equipment: - Control Heidenhain TNC 430 - 4-axis from SMP (France)

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 956.71.80.274, feed length X-axis: 600 mm, feed length Y-axis: 500 mm, feed length Z-axis: 400 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, input voltage: 400 V, Equipment: documentation/manual, The system shown is in perfect condition and ready for immediate use. Bsdpfxjwnq Sgs Aacolp No heavy roughing work has ever been performed with this machine. The machine is being sold together with a vise, including a tool cabinet with the shown contents. Additionally, it comes with 2 sets of ground supports and approximately 80 cutters, all in usable condition (some barely used), some as good as new, mostly coated in solid carbide, suitable for machining steel and aluminum.

Condition: good (used), Year of construction: 1991, weight of the machine ca. ca. 6 t The design of the basic machine is characterised by the following features: - horizontal position of the workpiece spindle; vertical position of the milling spindle or milling head of the milling head - The workpiece is held between the workpiece headstock (left) and the tailstock (right). - the radial slide is mounted on the base (X-axis) - the axial slide moves on the radial slide (Z-axis) Bjdpfx Aeub Amfoacelp - the shift milling head is equipped with an automatic angle adjustment (A-axis); the shift slide (Y-axis) moves diagonally to the workpiece diameter - CNC controlled - IBH control - loading device - Many accessories Technical data: - largest milling module with hobs according to DIN 8002: 4.5 mm - largest milling module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - max. workpiece diameter for manual loading: 200 mm - max. workpiece diameter for automatic loading: 150 mm - maximum workpiece length: 400 mm - largest / smallest milling cutter diameter: 102/40 mm - maximum cutter length: 230 mm - largest / smallest milling arbor diameter (standard): 32/16 mm - Axial slide path = largest milling length Z-axis: 300 mm - Radial slide path X-axis: 140 mm - Milling cutter shift path Y-axis: 100 mm - Milling stock path W-axis: 420 mm - Swivelling angle of shift milling head (left/right) A-axis: 50°/60° Milling coordinates: - Z-axis: 100 - 400 mm - X-axis: 1ß0 - 150 mm - Y-axis (end face of milling spindle): 50 - 230 mm - W-axis (face of tailstock spindle): 165 - 585 mm - Milling cutter speed range standard B-axis: 0 - 1500 rpm - Workpiece speed C-axis: 0 - 350 rpm Feed speeds: - X-axis: 3500 mm/min - Z-axis: 3500 mm/min - Y-axis: 4000 mm/min - W-axis: 5500 mm/min - V-axis (gantry loader): 80000 mm/min

Condition: good (used), Year of construction: 1998, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 107.40.98.165, Year 1998 Heidenhain TNC 430 710x500x500 mm - 42000 RPM Netweight 5670 kg Dimensions 2794x2997x3035* mm TECHNICAL DATA Table Dimensions 1220 x 457 mm Admitted load 1575 kg T-grooves 14 mm Number of T-grooves 5 Travels Longitudinal X 1016 mm Transverse Y 508 mm Vertical Z 635 mm Workspindle Power of AC-motor, 2-stepped gears 11kW Speed range, continuous 10-7500 min-1 Spindle speed (option) 10'000 rpm Taper ISO40 Feeds drive Feed programmable axes X, Y & Z 0 – 7620 mm/min Rapid feed axes X, Y, Z 18,0 m/min Automatisation Tool changer 20 pos Tool changing time (for nearby posts) 5,0 sec. errors and omissions excepted-data given without obligation Bjdpfxecl Rurj Aacslp Inventory Nr.4112006, machine equipped with  : NC Heidenhain TNC430M Milling spindle 42’000 min-1, HSK 40 E 36 tool positions Electronical handwheel Tool measuring Renishaw TS27 Ethernet card Minimal quantities greasing Unilube Aspiration Lumestat Protection cabin Rotary table Air passage through rotary table Vacuum clamping (by external provider) Spray gun Chips conveyor

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, nominal power (apparent): 10 kVA, overall weight: 6,500 kg, spindle speed (max.): 20,000 rpm, Heidenhain TNC530, 4th axis rotary table, spindle 12,200 rpm HSK 63, table 850x530mm, travels 600x450x450mm, 30-tool changer, weight 6500 kg. Blsdow Dc Irepfx Aacjp

Condition: good (used), Year of construction: 2000, 20000 rpm, Bljdpsr Urm Sefx Aacsp tool measurement on table will come, Parts shown by hand not come.

Year of construction: 1992, condition: ready for operation (used), X-axis: 560mm, Y-axis: 500mm, Z-axis: 400mm, clamping table dimensions vertical: 300/450mm, number of threaded holes: 2/6, threaded hole spacing: 45mm, thread: M16, angle table clamping surface: 460/800mm, number of T-slots: 7, T-slot spacing: 63mm, T-slot width: 14mm, max. workpiece weight (recommended): 350kg. Milling spindle drive number of working spindle speeds: 21, speed (geometrically graduated): 40-4000/min, step increment: 1.259, spindle motor power: 3.3/4kW, tool holder: ISO 40 / M16 with draw-in groove, vertical quill stroke: 90mm, feed in all 3 axes steplessly adjustable: 2-3000mm/min, rapid traverse X-axis and Y-axis: 6000mm/min, rapid traverse Z-axis: 4000mm/min, feed motor torque longitudinal and transverse: each 3.5Nm, feed motor torque vertical: 7Nm, control: Heidenhain TNC 407, connected load: 8.7kW, length: 3705mm, width: 2430mm, height: 3100mm, weight of the machine with vertical milling head and angle table: 2410kg, weight of the crate base: 170kg, weight of the transport crate: 400kg, operating hours: 18,924h. Accessories: 3D probe, 20x tool holders, splash guard cabin, coolant pump, work light, handwheel, machine documentation. An on-site inspection is possible. Bledpfx Asxcxz Nsacjp

Condition: good (used), Year of construction: 2000, Travels 1350 x 900 x 750 mm Bodei El Iaspfx Aacelp Machine. - Control Heidenhain TNC 426 Equipment tool changer 46-fold, milling spindle SK 40 12.000 rpm, incl. IKZ system and spool feeder Glass scales, 3D probe Renishaw MP12 Extensive accessories available if required! Please ask if you are interested !

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Heidenhain iTNC 530, working area X 600 x Y 450 x Z 450 mm, spindle mount CAT40, 24-position automatic tool changer, 20,000 rpm spindle, machine weight 6,100 kg, power connection 16 kW, main fuse 32 A, operating voltage 400 V, 50/60 Hz Bjdow Hxzmopfx Aacjlp

Condition: ready for operation (used), Year of construction: 2008, Movement X-Axis Movement 600 Y-Axis Movement 450 Z-Axis Movement 450 This 5-axis MIKRON UCP 600 Vario was manufactured in 2008, featuring a Heidenhain control, 600 mm X-axis, 450 mm Y-axis, and 450 mm Z-axis travel. It boasts a 20,000 rpm spindle speed, HSK-A 63 spindle nose, and a 75-slot tool magazine. Additional features include a BLUM tool measurement system and a 600L coolant tank with belt filter. Consider the opportunity to buy this MIKRON UCP 600 Vario vertical machining centre. Contact us for more information about this machine. Application Types Milling Bljdpoxc Rb Ujfx Aacop

Condition: used, functionality: fully functional, Universal Milling Machine Mikron WF 3S with 3-axis Heidenhain TNC 114 digital readout and infinitely variable feed Bjdjw Ni Riopfx Aacslp Technical Data: >> Year of manufacture: approx. 1990 >> Fixed angle table, clamping surface 800 x 450 mm >> Spindle speed: 50 - 2240 rpm >> Infinitely variable feed on 3 axes from 1 to 750 mm/min >> Rapid traverse on 3 axes: 1400 mm/min >> Travels X/Y/Z: 500/500/380 mm >> Vertical quill - SK40 extendable >> Weight approx. 1600 kg Accessories and Equipment: >> 3-axis active digital readout Heidenhain TNC 114 >> Central lubrication >> Operating manual, programming manual, electrical diagrams About the Machine: For sale is a used Mikron WF 3S universal milling machine. It features a Heidenhain path control TNC 114, which means it can move to a programmed dimension in any chosen axis (X, Y, or Z) and stops automatically upon reaching it. Four different zero points can be set, and dimensions can be entered as absolute or incremental values. The feed rate is infinitely adjustable from 0–750 mm/min, and can also be regulated during machining. Rapid traverse can be activated at the push of a button, while spindle speed is step-adjustable from 50 rpm to 2240 rpm, but only adjustable when the machine is stationary. The vertical milling head is mounted with three bolts and can be removed and reattached in just 2 minutes. It is hand-fastened using the swing arm seen on the left side of the machine and can be simply swung aside. A key feature of the machine are the large travel distances relative to its size: Z = 380 mm, X = 500 mm, Y = 500 mm. Additionally, the machine is equipped with electronic protection for the vertical spindle. Both mechanically and electrically inspected. Take the opportunity to inspect and test the machine under power on site.

Condition: good (used), MAchine come with toolholders. Blsdpjvk Ng Asfx Aacep

Year of construction: 1990, condition: excellent (used), Mikron WF2S tool milling machine with 3-axis Elesta-Visulesta digital display. Rigid angle table , SK 40 spindle mount. Very good working condition , from institute. Machine ready for demonstration under power by arrangement. Bjdpfx Aasg Nw Rzocslp

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 2,240 rpm, spindle speed (min.): 30 rpm, total height: 1,750 mm, total width: 1,790 mm, total length: 1,375 mm, table width: 450 mm, table length: 800 mm, overall weight: 1,450 kg, The milling machine is connected to the network and can be inspected by appointment. Very good condition. Accessories: 10 tool holders SK 40 1 hydraulic machine vice Bledpfjxbtaqjx Aacsp with Heidenhain path control.

Condition: excellent (used), functionality: fully functional, total length: 1,120 mm, gear diameter: 100 mm, total height: 1,680 mm, total width: 1,120 mm, workpiece diameter (max.): 100 mm, milling spindle length: 100 mm, type of input current: three-phase, milling length: 100 mm, spindle speed (max.): 2,400 rpm, spindle speed (min.): 200 rpm, overall weight: 500 kg, rotational speed (max.): 2,400 rpm, rotational speed (min.): 200 rpm, ⚙️ Mikron Type 132-02 (23) Gear Hobbing Machine – Very Good Condition | For Sale in Ireland 📍 Location: Ireland 💼 Condition: Very Good 🔧 Machine Type: Manual Gear Hobbing Machine ✅ In Stock and Ready for Inspection 🔍 Description: We are offering a Mikron Type 132-02 (23) Gear Hobbing Machine in very good mechanical condition. Manufactured in Switzerland, this machine is designed for precision cutting of spur, helical, and spline gears. Highly regarded for reliability and build quality, it’s an excellent choice for toolrooms, gear repair workshops, and small-scale gear production. The machine is fully functional and ready for immediate delivery from our facility in Ireland. 🧾 Technical Specifications: Manufacturer: Mikron Model: Type 132-02 (23) Control: Manual / Mechanical Gear Types: Spur, helical, spline Workpiece Capacity: Small to medium gears Workholding: Tailstock and chuck Drive Type: Mechanical with gear-driven spindle speeds Country of Origin: Switzerland Max Diameter: 100mm (4") Max Length: 100mm (4") Number of Teeth: 6-400 Max Pitch in Steel: 15 D.P. Max Pitch in Brass & Light Metal: 12 D.P. 12 Hob Revs: Geometrically Graded Between 200-2400rpm Feed: Horizontal or Plunge-Cutting Feed Speed: Hydraulically or Infinitely variable between 0.05 and 1mm per rev. Main Motor: 1.5hp Coolant Pump Motor: 0.1hp Hydraulic System Motor: 0.1hp Dimensions: 1120x1120x1680mm Machine Weight: 500kg Included Accessories: Hob arbors Tailstock 📦 Additional Information: ✅ Located in Ireland – available for inspection Bedpswqr T Dsfx Aacelp ✅ Ready for immediate dispatch 🚛 European and nationwide delivery available Mikron gear hobbing machine | Used Mikron 132-02 (23) for sale | Gear cutting machine Ireland | Spur gear hobbing lathe | Manual gear cutting machine UK Europe | Mikron hobbing machine used | Gear manufacturing toolroom machine

Condition: ready for operation (used), Year of construction: 2013, operating hours: 11,576 h, Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 20000 Bedpfx Aasw S N Elecelp Number of axis 5 Movement X-Axis Movement 800 mm Y-Axis Movement 650 mm Z-Axis Movement 500 mm Additional Equipment Automatic cabin doors Kineopt Internal cooling supply with ARO belt filter system and extraction 11380 program run hours, 11500 spindle hours Optional accessories such as clamping devices and tools available This 5-axis MIKRON UCP 800 Duro was manufactured in 2013. Ideal for complex geometries and multi-sided machining, this vertical machining center ensures precision and efficiency. Consider the opportunity to buy this MIKRON UCP 800 Duro vertical machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Five older thread milling machines Mikron are available, 3x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible. Blodpfjw Sxyxox Aacep

Condition: good (used), Mikron WF 32 CH Universal milling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Technical specifications Manufacturer: Mikron Type: WF 32 CH Control: Heidenhain TNC355 Travels: X 560 mm Y 500 mm Z 400 mm Clamping surface: 530 x 900 mm Rapid traverse: X, Y 6,000 mm/min, Z 5,000 mm/min Spindle speed: 20 - 6,300 rpm Dimensions: 2,700 x 2,000 x 2,400 mm Bjdpfxjwit Rho Aacelp Weight: 2,400 kg You can find more items - new and used - in our store! International shipping costs on request!

Condition: excellent (used), functionality: fully functional, total length: 1,120 mm, gear diameter: 100 mm, total height: 1,680 mm, total width: 1,120 mm, workpiece diameter (max.): 100 mm, type of input current: three-phase, milling length: 100 mm, spindle speed (max.): 2,400 rpm, spindle speed (min.): 200 rpm, overall weight: 500 kg, rotational speed (max.): 2,400 rpm, rotational speed (min.): 200 rpm, ⚙️ Mikron Type 132-02 (M23) Gear Hobbing Machine – Very Good Condition | For Sale in Ireland 📍 Location: Ireland 💼 Condition: Very Good 🧰 Machine Type: Manual Gear Hobbing Machine ✅ In Stock and Ready for Inspection 🔍 Description: We are offering a Mikron Type 132-02 (M23) Gear Hobbing Machine, in very good working condition. This Swiss-engineered model is ideal for high-precision gear cutting, capable of producing spur, helical, and spline gears. Built for reliability and accuracy, it is particularly well-suited for toolrooms, gear manufacturing, and precision engineering applications. Bodpfx Aaowqr S Hjcslp 🧾 Technical Specifications: Make / Model: Mikron 132-02 (M23) Machine Type: Manual Gear Hobbing Control: Manual/mechanical (non-CNC) Workpiece Capacity: Small to medium-size gears Spindle Speeds: Manually adjustable gear ranges Hob Slide: Vertical with fine feed adjustment Workholding: Tailstock and chuck system Country of Origin: Switzerland Condition: Very good – clean and mechanically sound Max Diameter: 100mm (4") Max Length: 100mm (4") Number of Teeth: 6-400 Max Pitch in Steel: 15 D.P. Max Pitch in Brass & Light Metal: 12 D.P. 12 Hob Revs: Geometrically Graded Between 200-2400rpm Feed: Horizontal or Plunge-Cutting Feed Speed: Hydraulically or Infinitely variable between 0.05 and 1mm per rev. Main Motor: 1.5hp Coolant Pump Motor: 0.1hp Hydraulic System Motor: 0.1hp Dimensions: 1120x1120x1680mm Machine Weight: 500kg Accessories Included: Hob arbors Change gears and tooling 📦 Additional Details: ✅ Located in Ireland – quick dispatch available ✅ Fully functional 🚛 Nationwide and European delivery available 🔍 Inspection welcome by appointment Mikron M23 gear hobbing machine | Used gear cutting machine for sale | Mikron 132-02 lathe | Manual gear hobber Ireland | Spur and helical gear machine | Toolroom hobbing lathe | Mikron Switzerland gear cutter | Gear hobbing machine in stock Europe

Condition: ready for operation (used), Year of construction: 2011, operating hours: 15,000 h, Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 20000 rpm Number of axis 5 Movement X-Axis Movement 650 Y-Axis Movement 650 Z-Axis Movement 550 Tools Number of index 30 Type of tool holder HSK63 Additional Equipment Bodpfx Ajw S N Eroacolp Internal cooling supply with ARO belt filter system and extraction 30 tools, HSK63, 20000 rpm Optional accessories such as clamping devices and tools available This 5-axis MIKRON HPM 600U was manufactured in 2011. A vertical machining centre designed for precision and efficiency, it's ideal for complex machining tasks. Consider the opportunity to buy this MIKRON HPM 600U vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2009, General Data Measurements width 2300 mm Measurements depth 5100 mm Measurements height 3090 mm Machine weight 12600 kg Control Unit Brand HEIDENHAIN Model i TNC 530 Main Drive Spindle speed range 15000 Spindle motor power HSK-A 63 Number of axis 5 Movement X-Axis Movement 1350 mm Y-Axis Movement 1150 mm Z-Axis Movement 700 mm A-Axis Movement 136° (-16 +120) Table Table load 1600 kg Additional Equipment A.P. cooling through spindle Chip evacuation Tool control with Dual Laser Radio frequency touch probe Air through spindle APS (Advanced Process System) Blodpexfww Isfx Aacop ITC (Intelligent Thermal Control) This 5-axis MIKRON HPM 1350U was manufactured in 2009. A universal machining centre, it offers advanced capabilities for diverse and complex machining tasks. If you are looking to get high-quality milling capabilities, consider the MIKRON HPM 1350U machine we have for sale. Contact us for more information. Application Types Milling