Used Mikron Vce 500 for sale (190)

Year of construction: 1999, condition: excellent (used), Working travels 710x500x500mm Bedpfxsd Hftxs Al Ielg Table size 1080x580mm Spindle taper 40 Spindle speeds -10000 rpm Tool changer 30 Pos. Control HEIDENHAIN TNC-430 Coolant through spindle MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 500 mm, feed length Z-axis: 400 mm, type of input current: three-phase, input voltage: 380 V, input current: 20 A, input frequency: 50 Hz, We offer this ready-for-use Mikron WF31D/TNC355 milling machine, year of construction 1989. Vertical and Horizontal machining Phase voltage: 380 V Frequency: 50 Hz Current: 20 A Power: 9 kW Control circuit voltage: 24 V Bljdsyhatljpfx Al Ijg Diagram number: 152.34.80.805 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 5.47.07.02, feed length X-axis: 600 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, rotational speed (max.): 6,300 rpm, number of slots in tool magazine: 44, TECHNICAL DETAILS Drive power at 44% duty cycle: 9 kW Drive power at 100% duty cycle: 6 kW Max. torque: 52 Nm Machining spindles (vertical and horizontal) Max. torque at the spindle at 44% duty cycle: 800 Nm Number of gear stages: 4 Speed range adjustable (vertical and horizontal): 10 – 6,300 rpm Tool holder / Pull stud: SK 40 / DIN 69871 Max. tool weight: 13 kg Tool diameter: 130 mm Pull force: 10,000 N Ejector force: 3,500 N Blsdjwm I N Hopfx Al Ijg Travel paths in automatic mode Longitudinal movement, spindle feed (X-axis): 600 mm Cross movement, spindle slide (Y-axis): 500 mm Vertical movement, spindle slide (Z-axis): 450 mm Feed drive (AC) Feed rate programmable X / Y axis: 0 – 15,000 mm/min Feed rate programmable Z axis: 0 – 12,000 mm/min Rapid traverse speed X-/Y-axis: 15,000 mm/min Rapid traverse speed Z-axis: 12,000 mm/min Coolant Coolant tank capacity: 150 l Flow rate: approx. 20 l/min Noise emission Sound power: 75 dB(A) Clamping table Table size: 530 × 900 mm Number of T-slots: 4 T-slot width: 14 H7 Table load capacity: 400 kg Tool changer TCD 44 Tool stations: 2 × 22 Tool diameter: 80 / 130 mm Tool length (max.): 350 mm Tool weight (max.): 6 kg Workpiece weight max. in drum magazine: 200 kg Chip-to-chip time: 20-25 s Tool change time: 12 - 16 s MACHINE DETAILS Total weight with protective enclosure: 3,000 kg Total weight with cabin roof: 3,100 kg Ambient conditions Max. permissible ambient temperature: 35 °C Max. permissible relative humidity: 75 % Electrical connection data Total installed nominal power: 15.8 kW Utilized and connection power: 12.3 kW Operating voltage and frequency: 3 × 400 V / 50 Hz

Condition: not inspected (used), Year of construction: 2000, operating hours: 6,191 h, functionality: unexamined, machine/vehicle number: 7158, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 46, No minimum price – guaranteed sale to the highest bidder! Loading can take place on 08/09/2025 or 09/09/2025! TECHNICAL DETAILS Spindle Spindle speed: max. 15,000 rpm Tool Data Tool magazine: 46 positions Tool holder: ISO-B40 Travel X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table NC rotary swivel table diameter: 800 mm Rotary Axis Nominal speed: 3,000 rpm Static torque (100K): 27 Nm Permissible load (with clamped swivel axis): 10,000 N Rotational speed of rotary axis: 12 rpm Bledpfsw Hq Ifjx Al Iog Swivel Axis Nominal speed: 3,000 rpm Static torque (100K): 27 Nm Permissible load (5-axis operation): 5,000 N Maximum rotational speed of rotary axis: 4 rpm Control: HEIDENHAIN TNC 426 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,200 x 2,900 x 3,000 mm Weight: 7,500 kg Spindle hours: 6,191 h Machine runtime hours: 26,997 h EQUIPMENT Technical documentation SK 40 tool holders ATORN 3D probe Note: The tool holders visible in the images are included in the scope of sale and delivery. The tools clamped in the holders, such as drills, reamers, milling cutters, etc., are not included in the scope of sale and delivery. The drive for the head swivel axis is missing.

Condition: ready for operation (used), Sell due to new acquisition good condition Mikron VC 1000 milling machine Bedpoh Tnpxefx Al Ielg

Condition: excellent (used), Mikron Gear Hobbing Machine A33/0 – for Module 0.5 to 2.5 – rarely used Manufacturer: Mikron Model: A33/0 – Gear Hobbing Machine (vertical) Version: Base machine with standard milling head Condition: used, very good condition, machine has been rarely operated Color: green Technical Data Max. workpiece diameter: approx. 80 mm Max. hobbing length: approx. 150 mm Module range: approx. 0.5 – 2.5 Ideal for small gears in the module range 0.5 – 1.0 Bjdpfx Alex A D Izs Islg Main drive: 3 kW Electrical connection: 3 x 380 V AC, 50 Hz Total power consumption: approx. 9.5 kVA Dimensions & Weight L x W x H: approx. 1,450 x 1,380 x 2,080 mm Weight: approx. 2,200 kg Special Features Very well-suited for manufacturing small gears (module 0.5 – 1.0) Machine was rarely used in production, therefore minimal wear Availability / Service Detailed photos and operating video available upon request Quotation including price, delivery terms, and lead time possible Subject to prior sale and errors.

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Mikron WF 3S with 3-Axis Active Digital Display Heidenhain TNC 114 and Infinitely Variable Feed Technical Data: >> Year of manufacture: approx. 1990 >> Fixed angle table, clamping surface 800 x 450 mm Bsdexu Hkcopfx Al Islg >> Spindle speed: 50 - 2240 rpm >> Infinitely variable feed on 3 axes from 1 to 750 mm/min >> Rapid traverse on 3 axes: 1400 mm/min >> Travel X/Y/Z: 500/500/380 mm >> Vertical quill - SK40, extendable >> Weight: approx. 1600 kg Accessories and Equipment: >> 3-axis active digital readout Heidenhain TNC 114 >> Central lubrication >> Operating manual, programming manual, electrical diagrams About the machine: For sale is a used Mikron WF 3S universal milling machine. It is equipped with a Heidenhain path control system TNC 114, which means it can travel a programmed distance in any one axis (X, Y, or Z) and stop automatically upon reaching the set value. Up to 4 different zero points can be set, and dimensions can be entered as either absolute values or incremental (chain) dimensions. The feed is infinitely variable from 0 to 750 mm and can be adjusted during machining. Rapid traverse can be activated at the push of a button. Spindle speed is step-adjustable from 50 rpm to 2240 rpm, but only when the machine is at standstill. The vertical milling head is mounted with three bolts, allowing for removal or reattachment in just 2 minutes; it is manually fixed using the articulated arm on the left of the machine and simply swung aside. A particular feature of this machine is its large travel distances relative to its size: Z = 380 mm, X = 500 mm, and Y = 500 mm. Additionally, the machine has electronic overload protection for the vertical spindle. Mechanically and electrically tested. You are welcome to view and test the machine under power at our facility.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 956.71.80.288, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, controller model: HEIDENHAIN TNC 150, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a site closure. Placing a bid constitutes a binding commitment to collect the item on time between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Bljdjxqg Itjpfx Al Ijg Travel X-axis: approx. 300 mm Travel Y-axis: approx. 300 mm Travel Z-axis: approx. 300 mm Tool holder: SK 40 Table dimensions: 1,000 x 500 mm, with 7 T-slots MACHINE DETAILS Control: HEIDENHAIN TNC 150 Electrical Data Operating voltage: 380 V Frequency: 50 Hz Rated current: 25 A Connection: 10.5 kW Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,400 x 2,200 mm Weight: 2,000 kg EQUIPMENT Documentation Collets Gauge block set

Condition: used, Year of construction: 1981, x-travel 800 mm y-travel 500 mm z-travel 460 mm table surface area 1000 x 500 mm spindle taper SK 40 control HEIDENHAIN TNC 150 spindle turning speed range 31,5 - 3150 U/min feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid traverse longitudinal and cross 6 m/min rapid traverse vertical 4 m/min quill stroke 110 mm Bodpfx Aetqqplel Iolg distance spindle nose and table max. 559 mm table load capacity max. 500 kg total power requirement 14 kW weight of the machine ca. 3,1 t dimensions of machine L x W x H 2,15 x 1,8 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, coolant

Condition: used, Year of construction: 1998, x-travel 710 mm y-travel 630 mm Bljdpetz Sqhofx Al Ieg z-travel 500 mm table surface area 1100 x 585 mm rotary table dia. 500 mm spindle taper SK 40 spindle turning speed range 5 - 6300 U/min spindle power 11 kW no. of tools in magazin 2 x 22 control HEIDENHAIN, TNC 426 total power requirement 20 kW weight of the machine ca. 5,8 t Accessories: various tool holders, probe RENISHAW OMP 60, coolant

Condition: good (used), Year of construction: 1998, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 107.40.98.165, Year 1998 Heidenhain TNC 430 710x500x500 mm - 42000 RPM Netweight 5670 kg Dimensions 2794x2997x3035* mm TECHNICAL DATA Table Dimensions 1220 x 457 mm Admitted load 1575 kg T-grooves 14 mm Number of T-grooves 5 Travels Longitudinal X 1016 mm Transverse Y 508 mm Vertical Z 635 mm Workspindle Power of AC-motor, 2-stepped gears 11kW Speed range, continuous 10-7500 min-1 Spindle speed (option) 10'000 rpm Taper ISO40 Feeds drive Feed programmable axes X, Y & Z 0 – 7620 mm/min Rapid feed axes X, Y, Z 18,0 m/min Automatisation Tool changer 20 pos Bledpfx Aocl Rurol Iog Tool changing time (for nearby posts) 5,0 sec. errors and omissions excepted-data given without obligation Inventory Nr.4112006, machine equipped with  : NC Heidenhain TNC430M Milling spindle 42’000 min-1, HSK 40 E 36 tool positions Electronical handwheel Tool measuring Renishaw TS27 Ethernet card Minimal quantities greasing Unilube Aspiration Lumestat Protection cabin Rotary table Air passage through rotary table Vacuum clamping (by external provider) Spray gun Chips conveyor

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 5.45.25.06, No minimum price – guaranteed sale to the highest bidder! Payment deadline for the machine is 20/11/2025! Placing a bid obligates you to timely collection between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Bodpfx Aexnk Hbjl Islg Travel distances: Travel X: 900 mm Travel Y: 630 mm Travel Z: 500 mm Spindle speed range, vertical and horizontal: 5–5,000 rpm Tool holder: SK 40/DIN 69871 Tool weight: max. 12 kg Tool diameter: max. 200 mm Clamping surface of the angle table: 1,200 x 600 mm Max. workpiece weight: 500 kg MACHINE DETAILS Control system: HEIDENHAIN TNC 407 Dimensions (L x W x H): 3,500 x 2,900 x 2,200 mm Weight: 4,100 kg Coolant tank capacity: 150 l EQUIPMENT Technical documentation Note: Transport by standard truck.

Condition: excellent (used), Year of construction: 1996, NEW ARRIVAL +++++ 1 used, very well-maintained MIKRON MULTISTAR CX 24 transfer machine / rotary transfer machine Machine can be inspected under power. Part setup is no problem. With MITSUBISHI AACPU-S1 control system - Machine Year of manufacture 1996 - Detailed technical data as per appendix - Machine can be inspected under power. Bedpfx Alst I T N Eo Iolg Conversion - INSTALLATION - Setup - Application can be offered. Pricing: ex-site, unpacked, uninsured. Delivery time: immediately - subject to prior sale. Technical data is non-binding - errors excepted. Payment: As is customary for used machines, net before removal.

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector Bjdpet Hw D Rofx Al Ijlg " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, Year of construction: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm total power requirement 2,6 kW Bsdpfeu U Sabox Al Iolg weight of the machine ca. 1,5t t

Condition: used, Year of construction: 1992, max. wheel diameter 150 mm gear width 300 mm max. module 4,5 min. module total power requirement 20 kW weight of the machine ca. 6 t Bedpfxjt Hwxbe Al Iolg dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1073098273, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: HEIDENHAIN TNC 426, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is December 4, 2025! By placing a bid, you commit to collecting the machine on time between December 10, 2025 and December 12, 2025! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 450 mm Travel Z-axis: 450 mm Feed rate XYZ: 3,000 rpm Rapid traverse: max. 22 m/min Max. recommended working feed rate: 15 m/min Spindle speed: 100 – 18,000 rpm Tool holder: HSK-63 A Tool change time: approx. 5 s Chip-to-chip time: approx. 7 s Tool diameter: Ø 90 mm fully loaded / Ø 110 mm partially loaded Tool length: 250 mm without taper Tool weight: max. 6 kg Table surface: 850 x 530 mm T-slots: 6 x 14 H12, alignment slot 14 H7 in the center of the table Slot spacing: 63 mm Table load capacity: max. 400 kg MACHINE DETAILS Bledpfexvp Iyex Al Iog Control: HEIDENHAIN TNC 426 Electrical data Operating voltage: 400 V Frequency: 50 Hz Connection: 40 kW Nominal current: 80 A Dimensions & Weight Dimensions (L x W x H): 2,800 x 2,300 x 2,800 mm Weight: 6,800 kg EQUIPMENT 30-position tool changer

Condition: not inspected (used), Year of construction: 2001, operating hours: 3,260 h, functionality: unexamined, machine/vehicle number: 730, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 685 mm, workpiece weight (max.): 1,500 kg, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you are committing to collecting the item within the specified period: between 01.12.2025 and 05.12.2025. TECHNICAL DETAILS Travel distances X-axis travel: 1,350 mm Y-axis travel: 1,150 mm Z-axis travel (vertical): 685 mm Z-axis travel (horizontal): 870 mm Spindle Main spindle speed: 0 – 12,000 rpm Acceleration time: approx. 2.5 s Tool holder: HSK-A63 Tool Data Tool magazine: 46-position changer Bledpfxjxxzqrj Al Isg Number of magazine stations: 46 Max. tool diameter (full magazine): 80 mm Max. tool diameter (partial magazine): 130 mm Max. tool weight: 8 kg Max. tool length: 300 mm Max. magazine load: 200 kg Chip-to-chip time: 9–12 sec H/H Feeds and Rapid Traverses Rapid traverse X, Y, Z: 30 m/min Table NC rotary table diameter: 1,100 mm Clamping surface: Ø 1,100 x 1,000 mm Table load: 1,500 kg Centering bore: Ø 50H6 Table height above floor: approx. 1,120 mm Swivel axis (A-axis): +15° to -120° Control: HEIDENHAIN TNC 426 MACHINE DETAILS Spindle hours: 3,260 h Machine operating hours: 82,797 h Dimensions & Weight Machine weight: approx. 12,000 kg Space requirement (L x W x H): 4,130 x 3,680 x 3,150 mm EQUIPMENT RENISHAW OMP60 probe system Technical documentation Note: Transport is expected to be carried out by a truck with a loading width of 3,000 mm.

Condition: not inspected (used), Year of construction: 2000, operating hours: 6,191 h, functionality: unexamined, machine/vehicle number: 7158, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 46, No reserve price – guaranteed sale to the highest bidder! Bidding obligates buyers to collect the machine within the specified period: between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Spindle Spindle speed: max. 15,000 rpm Tool Data Tool magazine: 46 stations Tool holder: ISO-B40 Travel Paths X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table NC rotary tilting table diameter: 800 mm Rotary Axis Nominal speed: 3,000 rpm Static torque (100K): 27 Nm Permissible transport load (with clamped tilting axis): 10,000 N Rotary axis speed: 12 rpm Tilting Axis Nominal speed: 3,000 rpm Bljdjxxzpuepfx Al Ijg Static torque (100K): 27 Nm Permissible transport load (5-axis operation): 5,000 N Maximum rotary axis speed: 4 rpm Control: HEIDENHAIN TNC 426 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,200 x 2,900 x 3,000 mm Weight: 7,500 kg Spindle hours: 6,191 h Machine on-time hours: 26,997 h EQUIPMENT Technical documentation SK 40 holders ATORN 3D probe Note: The tool holders visible in the images are included in the scope of sale and delivery. The tools clamped in these holders, such as drills, reamers, milling cutters etc., are not included in the scope of sale or delivery. The drive for the head tilting axis is missing.

Condition: not inspected (used), Year of construction: 2001, operating hours: 3,260 h, functionality: unexamined, machine/vehicle number: 730, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 685 mm, workpiece weight (max.): 1,500 kg, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Bidding obligates the buyer to collect the machine within the specified period from 01.12.2025 to 05.12.2025! TECHNICAL DETAILS Travel distances Travel X: 1,350 mm Travel Y: 1,150 mm Travel Z (vertical): 685 mm Travel Z (horizontal): 870 mm Spindle Working spindle speed: 0 – 12,000 rpm Acceleration time: approx. 2.5 s Tool holder: HSK-A63 Tool data Tool magazine: 46-position changer Number of magazine positions: 46 Max. tool diameter (all positions): 80 mm Max. tool diameter (some positions): 130 mm Max. tool weight: 8 kg Max. tool length: 300 mm Max. magazine load: 200 kg Chip-to-chip time: approx. 9–12 sec, tool-to-tool Feed rates and rapid traverse Rapid traverse X, Y, Z: 30 m/min Table NC rotary table diameter: 1,100 mm Clamping surface: Ø 1,100 x 1,000 mm Table load capacity: 1,500 kg Centering bore: Ø 50H6 Table height above floor: approx. 1,120 mm Swivel axis (A-axis): +15° to -120° Control system: HEIDENHAIN TNC 426 MACHINE DETAILS Spindle hours: 3,260 h Machine on-time: 82,797 h Bsdpoxm Tx Djfx Al Ijlg Dimensions & weight Machine weight: approx. 12,000 kg Required space (L x W x H): 4,130 x 3,680 x 3,150 mm EQUIPMENT RENISHAW OMP60 probe Technical documentation Note: Transport will likely be arranged via truck with a loading width of 3,000 mm.

Condition: not inspected (used), Year of construction: 2000, operating hours: 6,191 h, functionality: unexamined, machine/vehicle number: 7158, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 46, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Bidding obligates you to timely collection between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Spindle Spindle speed: max. 15,000 rpm Tool data Tool magazine: 46 positions Tool holder: ISO-B40 Bodpfx Aoxm Txksl Ielg Travel distances X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table NC rotary tilting table diameter: 800 mm Rotary axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible load during transport (with clamped tilting axis): 10,000 N Rotary axis speed: 12 rpm Tilting axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible load (5-axis operation): 5,000 N Maximum rotary axis speed: 4 rpm Control: HEIDENHAIN TNC 426 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,200 x 2,900 x 3,000 mm Weight: 7,500 kg Spindle hours: 6,191 h Power-on hours: 26,997 h EQUIPMENT Technical documentation SK 40 holders ATORN 3D probe Note: The tool holders shown in the pictures are included in the sale and delivery. The tools clamped in the holders, such as drills, reamers, end mills, etc., are not included in the sale and delivery. The drive for the head tilting axis is missing.

Condition: like new (used), functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530, spindle speed (max.): 36,000 rpm, operating hours of spindle: 4,651 h, spindle nose: HSK 50, number of spindles: 15, Equipment: CE marking, documentation/manual, VERTICAL MACHINING CENTER MIKRON MODEL HSM 800 X-AXIS TRAVEL 800 mm Y-AXIS TRAVEL 600 mm Z-AXIS TRAVEL 500 mm SPINDLE HSK E 50 SPINDLE SPEED 36,000 RPM WORKPIECE PROBE LASER MEASUREMENT SYSTEM OPERATION AND MAINTENANCE MANUALS CE CERTIFICATION CNC HEIDENHAIN iTNC 530 REMOTE HANDWHEEL Bedpfew U T Szex Al Iolg SIEMENS MOTORS AND DRIVES HEIDENHAIN LINEAR GLASS SCALE MEASURING SYSTEM TOTAL OPERATING HOURS: 6447 SPINDLE HOURS: 4651

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, controller model: iTNC Heidenhain 530, spindle speed (max.): 42,000 rpm, swivel angle C-axis (max.): 360 °, number of axes: 5, No minimum price – guaranteed sale to the highest bidder! The lot consists of 2x 5-axis HSC machining centers and pallet system with robot MIKRON HSM 600 U (serial number: 217.88.00.070) TECHNICAL DETAILS Travel X-axis travel: 800 mm Y-axis travel: 600 mm Blodpfx Alox Hx T As Ieg Z-axis travel: 500 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: +30° / –110° C-axis rotation range: 360° C-Axis Combination rotary table range: n x 360° Rotational speed: 360 rpm (2,160°/s) Torque (nominal): 340 Nm Torque (max.): 217 Nm max. Clamping torque: 1,400 Nm B-Axis Swivel range: +30° / –110° Swivel speed: 200 rpm (1,200°/s) Swivel torque: 640 Nm Clamping torque: 2,800 Nm Clamping surface: 320 x 320 mm Table load capacity: max. 120 kg Tool magazine: 68 stations Control: Heidenhain iTNC 530 Workpiece weight: max. 120 kg EQUIPMENT Rotary tilting table with Erowa UCP MIKRON HSM 400 U (serial number: 217.87.00.178) TECHNICAL DETAILS Travel X-axis travel: 400 mm Y-axis travel: 240 mm Z-axis travel: 350 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: ±110° C-axis rotation range: 360° C-Axis Combination rotary table range: n x 360° Rotational speed: 250 rpm (1,500°/s) Torque (nominal): 132 Nm Torque (max.): 217 Nm max. Clamping torque: 500 Nm B-Axis Swivel range: ±110° Swivel speed: 165 rpm (990°/s) Swivel torque (nominal): 485 Nm Swivel torque (max.): 686 Nm max. Clamping torque: 2,000 Nm Clamping surface: ITS 148 Powerchuck Table load capacity: max. 25 kg Tool magazine: 36 stations Control: Heidenhain iTNC 530 EQUIPMENT Rotary tilting table EROWA ROBOT MULTI TWIN Gripper station: 6 stations Grippers: various Storage system Rotary storage: 5 levels Level allocation Level 1: 5 x UCP 300 x 300 mm Level 2: 5 x UCP 300 x 300 mm Level 3: 15 x ITS 148 Level 4: 15 x ITS 148 Level 5: 30 x ITS 50 GENERAL EQUIPMENT Absolute measuring systems on all axes Infrared touch probe LASER Electronic handwheel for setup mode Graphite dust extraction 2x BURN WK 5806 Rotary pallet storage

Condition: used, Year of construction: 1980, x-travel:500 mm y-travel:500 mm z-travel:400 mm turning speed range:30 - 2240 U/min feeds -stepless-:1 - 750 mm/min rapid traverse:1500 mm/min table surface area:400 x 800 mm tool taper:SK 40 total power requirement:7,8 kW weight of the machine ca.:1.8 t dimensions of the machine ca.:2,1 x 1,6 x 2,2 m Bljdpfjcxxq Dsx Al Iog

Condition: used, Year of construction: 1997, x-travel:710 mm Blodpfx Alelu N Hie Iog y-travel:630 mm z-travel:500 mm turning speed range - spindle:5 - 5000 1/min power - main spindle:11 kW tool taper:SK 40 tool changer:44 Werkzeuge feed:10 m/min surface area:1200 x 600 mm table load:0,5 t total power requirement:15 kVA weight of the machine ca.:4,24 t Toolchanger with 44 tools, pendant handwheel for easy setup.