Used Mikron Vcp 1000 for sale (191)

Condition: used, Ball screw with nut, transroll screw, ball screw nut, lead screw, threaded rod, threaded bolt, threaded rod, ball screw, linear bearing, precision ball screw Nsdpfxekvrqio Ah Ujwr -Manufacturer: Mikron, ball screw from CNC milling machine Mikron WF 51C/155 -Thread length: 540 mm -Shaft: Ø 32 mm -Dimensions: see photos -Dimensions: 870/140/H130 mm -Weight: 18kg

Condition: good (used), Year of construction: 1991, weight of the machine ca. ca. 6 t The design of the basic machine is characterised by the following features: - horizontal position of the workpiece spindle; vertical position of the milling spindle or milling head of the milling head - The workpiece is held between the workpiece headstock (left) and the tailstock (right). - the radial slide is mounted on the base (X-axis) - the axial slide moves on the radial slide (Z-axis) - the shift milling head is equipped with an automatic angle adjustment (A-axis); the shift slide (Y-axis) moves diagonally to the workpiece diameter - CNC controlled - IBH control - loading device - Many accessories Technical data: - largest milling module with hobs according to DIN 8002: 4.5 mm - largest milling module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - max. workpiece diameter for manual loading: 200 mm - max. workpiece diameter for automatic loading: 150 mm - maximum workpiece length: 400 mm - largest / smallest milling cutter diameter: 102/40 mm - maximum cutter length: 230 mm - largest / smallest milling arbor diameter (standard): 32/16 mm - Axial slide path = largest milling length Z-axis: 300 mm - Radial slide path X-axis: 140 mm - Milling cutter shift path Y-axis: 100 mm - Milling stock path W-axis: 420 mm - Swivelling angle of shift milling head (left/right) A-axis: 50°/60° Milling coordinates: - Z-axis: 100 - 400 mm Nedpoub Amfofx Ah Uowr - X-axis: 1ß0 - 150 mm - Y-axis (end face of milling spindle): 50 - 230 mm - W-axis (face of tailstock spindle): 165 - 585 mm - Milling cutter speed range standard B-axis: 0 - 1500 rpm - Workpiece speed C-axis: 0 - 350 rpm Feed speeds: - X-axis: 3500 mm/min - Z-axis: 3500 mm/min - Y-axis: 4000 mm/min - W-axis: 5500 mm/min - V-axis (gantry loader): 80000 mm/min

Year of construction: 1987, condition: good (used), Mikron WF2SA tool milling machine with 3-axis Heidenhain active digital readout. Fixed angle table, SK 40 spindle holder. Ready for operation . Machine ready for demonstration under power by arrangement. Nsdpfeqttt Tox Ah Uewr

Condition: good (used), Mikron WF 32 CH Universal milling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Nwedpswit Rhjfx Ah Usr Technical specifications Manufacturer: Mikron Type: WF 32 CH Control: Heidenhain TNC355 Travels: X 560 mm Y 500 mm Z 400 mm Clamping surface: 530 x 900 mm Rapid traverse: X, Y 6,000 mm/min, Z 5,000 mm/min Spindle speed: 20 - 6,300 rpm Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg You can find more items - new and used - in our store! International shipping costs on request!

Condition: like new (used), Year of construction: 2012, operating hours: 2,500 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 24 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 16 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, overall weight: 18,600 kg, spindle speed (max.): 10,000 rpm, spindle nose: ISO B40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, Machine in good condition and maintained by the manufacturer. Available quickly. Nwsdpfx Ahjvxk Tgo Uer Equipped with Renishaw, Option: 4th Axis. Digital integration and 4th axis cabling. A second machine is available. Possibility of delivery and installation by us.

Condition: used, Year of construction: 1985, x-travel 500 mm y-travel 500 mm z-travel 350 mm table surface area 800 x 450 mm spindle taper: ISO 40 quill stroke mm feed - longitudinal/cross mm/min feeds vertical mm/min turning speed range max. 3150 U/min voltage 380 V / 50 Hz power capacity 4 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,5 x 2,3 x 2,0 m • HEIDENHAIN TNC 155 - control, • with electrical hand wheel, • several tool tapers, Nedpfx Ahjtv Ia Te Uswr • new set of bevel gears,

Condition: used, CNC control, control panel, logic unit, path control -Manufacturer: Heidenhain, logic unit path control -Type: LE 407 A 236 484 10 -Individual components: see photos Nwsdpfjpz Sf Esx Ah Uor -Dimensions: 480/330/H140 mm -Weight: 9.5 kg

Condition: good (used), Year of construction: 1972, max. wheel diameter 80 mm gear width 60 mm max. module 3 min. module 0,1 total power requirement 0,4 kW weight of the machine ca. 120 kg dimensions of the machine ca. 0,6x0,6x0,75 m Njdpfxjw N S D Sj Ah Uewr

Condition: used, Year of construction: 2001, Technical data: Tool holder: SK 40 Travels: X-axis: 530 mm Nedpot Hr Ahjfx Ah Uewr Y-axis: 450 mm Z-axis: 450 mm Max. Tool weight: 260 kg Spindle speed: 12000 1/min Max. Table load: 380 kg Weight, approx.: 6500 kg Dimensions (DxWxH), approx.: 2000 x 2200 x 2400 mm Equipment: - Control Heidenhain TNC 430 - 4-axis from SMP (France)

Condition: good (used), Mikron WF31D Precision milling and drilling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Technical specification The WF 31 D is a precision milling and drilling machine for series production and CNC training. Driven by an automatically shiftable stepped gearbox and Poly-V-belt. Vertical spindle can be extended by 90 mm; changeover from vertical to horizontal machining possible. Recirculating ball screws with DC drives enable simultaneous feed movements. Guides are protected against dust, chips and coolant. Technical data Manufacturer: Mikron Type WF31D Control: Heidenhain TNC 355 Longitudinal movement (X): 560 mm Transverse movement (Y): 500 mm Vertical movement (Z): 400 mm. Drive power: 3.3/4.0 kW Speed range: 40-4000 rpm. Feed speed: 2-3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min. Electrical equipment Total installed rated power: 10.0 kW installed effective power: 7.3 kW. Operating voltage: 3 x 380 V - 50/60 Hz Protection class: IP 54. Max. permissible ambient temperature: +35 °C Relative humidity: 75 %. Dimensions and weights Width 2450mm Length 2800mm Nsdpfewiucfjx Ah Uowr Height 2000mm Net weight of the machine: approx. 2570 kg. Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, Year of construction: 1997, Technical details: x-travel: 710 mm y-travel: 630 mm z-travel: 500 mm turning speed range - spindle: 5 - 5000 1/min power - main spindle: 11 kW tool taper: SK 40 tool changer: 44 Werkzeuge feed: 10 m/min surface area: 1200 x 600 mm table load: 0,5 t total power requirement: 15 kVA weight of the machine ca.: 4,24 t Toolchanger with 44 tools, pendant handwheel for easy setup. * Nsdpovb Hzrsfx Ah Uewr

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 5.47.07.02, feed length X-axis: 600 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, rotational speed (max.): 6,300 rpm, number of slots in tool magazine: 44, TECHNICAL DETAILS Drive power at 44% duty cycle: 9 kW Drive power at 100% duty cycle: 6 kW Max. torque: 52 Nm Machining spindles (vertical and horizontal) Max. torque at the spindle at 44% duty cycle: 800 Nm Number of gear stages: 4 Speed range adjustable (vertical and horizontal): 10 – 6,300 rpm Tool holder / Pull stud: SK 40 / DIN 69871 Max. tool weight: 13 kg Tool diameter: 130 mm Pull force: 10,000 N Ejector force: 3,500 N Travel paths in automatic mode Longitudinal movement, spindle feed (X-axis): 600 mm Cross movement, spindle slide (Y-axis): 500 mm Vertical movement, spindle slide (Z-axis): 450 mm Feed drive (AC) Feed rate programmable X / Y axis: 0 – 15,000 mm/min Feed rate programmable Z axis: 0 – 12,000 mm/min Rapid traverse speed X-/Y-axis: 15,000 mm/min Rapid traverse speed Z-axis: 12,000 mm/min Coolant Coolant tank capacity: 150 l Flow rate: approx. 20 l/min Noise emission Sound power: 75 dB(A) Clamping table Table size: 530 × 900 mm Number of T-slots: 4 T-slot width: 14 H7 Table load capacity: 400 kg Tool changer TCD 44 Tool stations: 2 × 22 Tool diameter: 80 / 130 mm Tool length (max.): 350 mm Tool weight (max.): 6 kg Workpiece weight max. in drum magazine: 200 kg Chip-to-chip time: 20-25 s Tool change time: 12 - 16 s MACHINE DETAILS Total weight with protective enclosure: 3,000 kg Total weight with cabin roof: 3,100 kg Ambient conditions Max. permissible ambient temperature: 35 °C Max. permissible relative humidity: 75 % Electrical connection data Nedpfjwm I N Hex Ah Uswr Total installed nominal power: 15.8 kW Utilized and connection power: 12.3 kW Operating voltage and frequency: 3 × 400 V / 50 Hz

Condition: used, Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron UME 600 -Motor: Siemens 380V 3.7/5.25 kW see photo nameplate -Speed: 1500/9000 rpm -Spindle head: SK40 mount Nwedpjrc Ik Hefx Ah Usr -Dimensions: 1550/560/H735 mm -Weight: 555 kg

Condition: ready for operation (used), Year of construction: 2008, operating hours: 3,825 h, functionality: fully functional, machine/vehicle number: 214.84.70.265, MIKRON HSM 400 U from 2008, very few operating hours Nsdpfx Ahsxg Rvyj Uswr

Condition: good (used), Year of construction: 1990, 1 used universal tool milling machine made by Mikron type WF 2 SA year 1990 with Heidenhain active digital readout TNC 114 Nsdpfxsrywgzj Ah Uewr Stepless feed Lamp Coolant device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm Clamping surface 635 x 250 mm Feed in 3 axes 0 - 750 mm/min Rapid traverse in 3 axes 1400 mm/min Holder ISO 40 Vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m Weight approx. 1200 kg

Year of construction: 1992, condition: ready for operation (used), X-axis: 560mm, Y-axis: 500mm, Z-axis: 400mm, clamping table dimensions vertical: 300/450mm, number of threaded holes: 2/6, threaded hole spacing: 45mm, thread: M16, angle table clamping surface: 460/800mm, number of T-slots: 7, T-slot spacing: 63mm, T-slot width: 14mm, max. workpiece weight (recommended): 350kg. Milling spindle drive number of working spindle speeds: 21, speed (geometrically graduated): 40-4000/min, step increment: 1.259, spindle motor power: 3.3/4kW, tool holder: ISO 40 / M16 with draw-in groove, vertical quill stroke: 90mm, feed in all 3 axes steplessly adjustable: 2-3000mm/min, rapid traverse X-axis and Y-axis: 6000mm/min, rapid traverse Z-axis: 4000mm/min, feed motor torque longitudinal and transverse: each 3.5Nm, feed motor torque vertical: 7Nm, control: Heidenhain TNC 407, connected load: 8.7kW, length: 3705mm, width: 2430mm, height: 3100mm, weight of the machine with vertical milling head and angle table: 2410kg, weight of the crate base: 170kg, weight of the transport crate: 400kg, operating hours: 18,924h. Accessories: 3D probe, 20x tool holders, splash guard cabin, coolant pump, work light, handwheel, machine documentation. An on-site inspection is possible. Nedpfx Ajxcxz Njh Uewr

Condition: used, Auxiliary circuit breakers, circuit breakers, circuit breakers, load disconnectors, load disconnectors, circuit breakers, circuit breakers, auxiliary switches, main switches -Manufacturer: Mikron, main switch switch disconnector from CNC milling machine Mikron UME 600 -Adapter: Heidenhain Type: 239 758 01 Nedpforc Ilnox Ah Uswr -Dimensions: 430/150/115 mm -Weight: 1.1 kg

Condition: used, Permanent magnet motor, permanent magnet motor, electric motor, n-Mot, Perm Magnet Motors, servo motor, geared motor, electric motor, three-phase motor -Manufacturer: Siemens, permanent magnet motor from CNC milling machine Mikron WF 51C/155 -Type: HU3074-OAC01-Z -Voltage: 167 V -Power: 1.8 kW -Speed: 2000 rpm -Shaft: Ø 22 x 45 mm -Number: 2x motor available Nsdpfx Ahskxhpus Ujwr -Price per piece -Dimensions: 390/140/H185 mm -Weight: 23 kg/pc.

Condition: good (used), Servo Drive, Servo Card, Input Processor, Control Card, Input Card, Controller, Converter, Controller, Servo Module, Axis Amplifier, Axis Amplifier, Velocity Control Unit, Spindle Amplifier Module, Servo Amplifier -Manufacturer: Bosch, transistor amplifier completely equipped from CNC milling machine Mikron WF 51C/155 -Type: TR15-XA-140-230V -Control cards/single modules: see photos Nsdpfx Aowd N S Djh Uswr -Dimensions: 480/260/H365 mm -Weight: 24 kg

Condition: used, Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke -Manufacturer: varimax, soft start choke, three-phase choke from CNC milling machine Mikron WF 51C/155 Nsdpfx Aokzpngsh Uewr -Type: D 1515 S3 -Current: 10A -Dimension: 180/90/H190 mm -Weight: 9.5 kg

Condition: used, PLC control, power module, LT module, E/R module, regenerative module, CNC control, safety slot universal module, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: Mattle Mikron, safety insert universal module board from CNC milling machine Mikron UME 600 Nedpfxsrb E Ewe Ah Ujwr -Safety module: Type SEMU TN 24VDC -Board: Mikron 958 74 10 275 S300 -Dimensions: 300/170/H200 mm -Weight: 1.4 kg

Year of construction: 2018, condition: used, Computer monitor, screen, TFT industrial monitor Nodpjrcnmzsfx Ah Uowr -Monitor: TFT industrial monitor from CNC milling machine Mikron UME 600 -Type: 12.1" TFT industrial monitor 2363130 -Dimensions: 400/320/100 mm -Weight: 3.1 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table Nwederbm Udspfx Ah Uer -Manufacturer: Mikron, milling machine table T-slot table from CNC machining center UME 600 -Table surface: 530 x 900 mm -T grooves: groove width 14 mm, groove spacing 63 mm -Transport dimensions: 900/530/H390 mm -Weight: 248 kg

Condition: used, CNC control, control panel, machining center operator panel, control unit, control panel, control unit -Manufacturer: Mikron, operating unit -Type: TCD 22 - DIN 8659 -Printed circuit board: WW TCD 22 control unit 104.73.20.042 -Individual components: see photos -Dimensions: 480/130/H240 mm -Weight: 5 kg Nedpfxoprb Dvo Ah Uswr

Condition: good (used), Electronic handwheel, Simatic panel, operator panel, machine control, interface panel, control panel, operating unit, control panel, HMI panel, hand terminal, hand control panel -Manufacturer: Mikron, hand terminal control panel from CNC milling machine Mikron UME 600 -Connection plug: see photos Nsdsrc Ikxepfx Ah Uowr -Transport dimensions: 400/240/H95 mm -Weight: 1.1kg