Used Mill Turn Machine for sale (65,643)

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 370483, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, controller model: HEIDENHAIN TNC 124, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Table length: 800 mm Table width: 425 mm Max. workpiece weight on table: 250 kg Distance between vertical spindle and table: 560 mm Spindle taper: SK 40 Max. spindle speed: 5,000 rpm Swiveling range vertical milling head: ± 90° Feed rates: up to 2,000 mm/min Rapid traverse X-axis: 10 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse Z-axis: 8 m/min Vertical quill stroke: 60 mm MACHINE DETAILS Control: HEIDENHAIN TNC 124 Hnsdeyhnmtopfx Aadeh Connection: 50 Hz 3x 400 Volt Milling spindle motor: 5.5 / 7 kW Total power consumption: 15 kVA Dimensions & Weight Machine weight: approx. 1,800 kg Dimensions (L x W x H): 2,100 x 1,800 x 2,050 mm EQUIPMENT Rigid angle table Electronic handwheel Heidenhain probe Vertical milling head Full splash guard cabin Coolant system Machine lamp

Condition: excellent (used), feed length X-axis: 700 mm, feed length Y-axis: 350 mm, feed length Z-axis: 475 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 475 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 25 rpm, quill stroke: 100 mm, table length: 1,360 mm, table width: 300 mm, Cincinnati 2MK Horizontal Mill with Universal Vertical Head Model: 2MK Table Atea: 1360 x 300mm (53.5” x 11.8”) Longitudinal Travel: 700mm Cross Travel: 350mm Vertical Travel: 475mm Spindle Taper: 50 INT Spindle Speeds: 25 – 1500 RPM Hjdpfx Aaeygk Drjdsnh Machine with: Horizontal Arbor & Arbor Support Angular Double Swivel Head

Condition: used, New 2013 Table size 1474 x 356 mm X axis 1016 mm Y Axis 596 mm Z Axis 584 mm (Head Traverse) Spindle Speeds 40 – 5000 rpm & 40ISO Hjdpfeyhdi Rsx Aadonh 7.5 hp Spindle Drive. Max Table load 850 kg

Condition: good (used), Year of construction: 2010, Maximum turning diameter 406mm, Maximum turning length 520mm, bar capacity 65mm, Y axis -/+ 51mm, Spindle speed, 4,500 rpm, sub-spindle speed 4,500 rpm, milling speed 5,000rpm, 12 station turret, 18.5 kw main motor, Hedpfxjyizllj Aadsnh C axis 0.001degrees, Fanuc I series control, parts catcher, tool setter, swarf conveyor, 3 jaw chucks to main and sub spindles, magazine barfeed

Condition: good (used), Mazak Integrex E-410H Multi-Tasking Lathe Mazatrol 640M Pro Control, Hsdpfx Asvgzuweadenh 610mm Turning Dia Serial No. 164385 (2003)

Condition: used, Year of construction: 2014, Mazak Quick Turn Smart 250 CNC Turning Centre with Mazatrol Smart CNC Control, Kitagawa BB 210 Powered 3 Jaw Chuck, 12 Position Tool Turret, Tailstock, Max Spindle Speed 4000rpm, Filtermist FX 4002 Oil Mist Extractor. Machine Weight 4610kg. S/No. 240540 (2014) Includes Various Tool Holders, Sleeves and Centre in Turret and Boxes. Country of Origin: United Kingdom Hnsdpjyhd Exjfx Aadsh Location: These lots are located in Dundee, Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, Approx. 3000mm Between Centres, 10 Position Tool Turret, Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006) Includes Various Tool Holders and Sleeves in Tool Turret and Boxes. Country of Origin: Korea Hnedpfxsyhdw Is Aadsh Location: These lots are located in Dundee, Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2000, Nicolas Correa CF22/25 Plus CNC Bed Type Milling Machine With Heidenhain TNC-426 Control Table Dimension 2,500 x 700mm (5 'T' Slots). Maximum Table Load 3,500kg. Axis Travel 'X'=2,500mm, 'Y'=800mm, 'Z'=800mm. Rapid Traverse 'X'=12m/min, 'Y'=12m/min, 'Z'=12m/min. Cutting Feed 'X, Y, Z'=5-5,000mm/min. Spindle Taper ISO 50. Spindle Speed Range 20-4,000rpm (22kW Motor). Universal Manual Rotary Spindle Head. S/No. 967319 (2000). Hjdpfeydmhzjx Aadonh With Coolant System. Weight 10,000kg.

Condition: used, Year of construction: 1997, Year: 1997 Table: 1780 x 415mm Spindle Speed 30 – 2066 RPM FIDIA Control Power Draw Bar Hnedewtd Dyspfx Aadeh LOVO Light Coolant

Condition: refurbished (used), Table Size: 1635mm x 460 mm X Long Axis: 1300 mm Hnodpfxswh N Uys Aadjh Y Cross Axis: 700 mm Z Vertical Axis: 500mm Spindle Taper: 40 ISO Spindle Speeds: 30-2066rpm Feed Range: 1.6 to 820mm/min Rapid Feed Rates X/Y/Z: 2800mm/min Max. distance between milling head and table 649 mm Machine Weight 3200 kg Machine Dimensions L x 2361mm D x 2500mm H x 1648mm Main Motor 8.7 kW Machine Light Universal Head Coolant Condition: Fully Refurbished (reground, hand scraped and re-aligned) New Screws & Nuts on X, Y and Z

Condition: excellent (used), Year of construction: 2011, New 2011 Axis X 785 mm Axis Y 470 mm Axis Z 530 mm CNC PROTOTRAK PMX Table length 900 mm Table width 500 mm Max. part weight 460 kg Number of tool pockets 16 Spindle taper BT40 Max. spindle speed 8000 rpm Hnjdpfx Aaett Ivbodeh Spindle motor power 11 kW ----- Length x width x height 2870.0 × 2246.0 × 2743.0 Weight 3410 kg

Condition: excellent (used), Year of construction: 2020, Distance between spinles 800mm, Hedpfx Ajw Nwfboadjnh Y axis (+/-105mm), C axis 0.001 degrees, B axis -30/+210 degrees, main spindle speed 5,000rpm, sub spindle speeds 6,000 rpm, milling speed 12,000rpm, bar capacity 65mm, 38 station ATC, spindle power 22/18.5 kw, Siemens 840D control, tool setter, through spindle coolant, magazine barfeed, robot loader,

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 530, empty load weight: 45,000 kg, total length: 11,055 mm, total width: 6,320 mm, total height: 4,140 mm, Type: DMC-4100LH 2800 mm tussen de kolommen!! Zonder freeskop kunt u klassieke verticale bewerkingen uitvoeren. Met de multihoekfrees (MA-25) kunt u veel verschillende vlakken bewerken. MA-25 2-assige freeskop - 30 kW - 2000 tpm - 1500 Nm koppel C-as bereik: 0-360° - 2,5° Bereik van de A-as: +/- 110° - 2,5° Koeling via spindel: 40 bar Totaal vermogen: 67 kW Geen foundation nodig! De Johnford DMC-serie brugfreesmachine met dubbele kolom en beweegbare tafel is vervaardigd uit een brug/kolomconstructie van gegoten Meehanite-ijzer, die naar verluidt 30 procent minder vloeroppervlak in beslag neemt dan vergelijkbare verticale bewerkingscentra met C-frame. De brugfreesmachines zijn verkrijgbaar in uitvoeringen met beweegbare tafel en met schuifkolom (vaste tafel), met afmetingen variërend van 91 x 91 x 76 cm tot 18 x 6 meter. De lange basisconstructie biedt volledige ondersteuning aan de tafel over de gehele Y-asbeweging van 130 cm, waardoor zeer zware werkstukken bewerkt kunnen worden. De Y- en Z-assen dragen te allen tijde een vaste belasting, terwijl de X-as de enige dynamische belasting draagt. Dit maakt nauwkeurige bewerkingen en strakke toleranties mogelijk tijdens bewerkingen met hoge snelheid. Doordat er geen tafeloverhang is, worden de helling en de draaiing van de X-as geëlimineerd. De afstand tussen de hartlijn van de spindel en de kolom is geminimaliseerd, wat de stijfheid verder verhoogt. De zwaar geribbelde gietijzeren constructie van de machine zorgt voor een lange levensduur van het gereedschap en een goede oppervlakteafwerking van het werkstuk. De combinatie van twee schroefbandtransporteurs en een rupsbandtransporteur garandeert een volledige spaanafvoer met minimale handmatige reiniging. Bovendien wordt eindige-elementenanalyse (FEA) gebruikt voor het ontwerp van elke brugfreesmachine, waarbij de effecten van realistische omstandigheden, zoals trillingen, warmte, vloeistofstroming en andere fysieke invloeden, worden gesimuleerd. Hodpfexp Sk Dox Aadenh Longitudinal travel X-axe: 4100 mm Cross travel Y-axe: 2800 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 4200 x 2400 mm Power on spindle: 30 kW Admission in millinghead (ISO): BT 50 Max speedrange: 6000 rpm

Condition: ready for operation (used), total height: 2,550 mm, total length: 4,200 mm, total width: 3,250 mm, empty load weight: 11,000 kg, met digitale uitlezing Max longitudinal travel X-axe: 1800 mm Max cross-travel Y-axe: 700 mm Max travel Z-axe: 1000 mm Power on spindle: 15 kW Admission in boring head (ISO): ISO 50 Hjdpfx Aeyivzneadjnh Spindlespeeds: 2000 rpm Table size: 2500 x 620 mm ACCESSORIES & TOOLING: yes

Condition: used, Year of construction: 2014, Mori Seiki NMV 3000 DCG 5 Axis CNC Milling Machine with Mori Seiki F31IAS CNC Control, 350mm Work Area/Bed, 120 Position ATC, BT40 Spindle Taper, Hydrajet WP10-1000 High Pressure Coolant System, ConSep Swarf Conveyor. S/No. V3010111005 (2014). Country of Origin: Switzerland Hsdoyfgbqepfx Aadsnh Location: These lots are located in York, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 1984, Water slot milling machine, water slot milling machine -Three-spindle -electropneumatic circuit -pneumatic workpiece clamping Hnjdpfx Aaox R Sv Sedoh -Fine adjustment via spindles and handwheels

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Table Size: 457 x 381mm ‘X’ axis Travel: 355mm Hjdpfx Asydvzdjadjnh ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required

Condition: ready for operation (used), De vorige eigenaar was een Belgisch bedrijf dat aluminium mallen produceerde voor Bridgestone-autobanden. De apparatuur bestaat uit 3 Breton-machines en een Fanuc-robot voor het lossen van de werkstukken. Breton Ultrix 800 (nr. 1) Breton Ultrix 800 (nr. 2) Breton Xceeder 900 Fanuc M-900iB handlingrobot Max longitudinal travel X-axe: 18 000 mm Hnodsxtgkgopfx Aadeh

Condition: used, Year of construction: 1990, total height: 2,300 mm, total width: 1,800 mm, total length: 2,800 mm, Empty weight: 3.500 kg - Year: 1990 - Documentation available: Yes - CE certificate present: No - Serial number: 16090455 - Drive system: CNC - Horizontal/vertical: Horizontal - Control system brand: Heidenhain - Power [kW]: 16.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 850 - Y-axis travel [mm]: 435 - Z-axis travel [mm]: 210 - Table length [mm]: 1570 - Table width [mm]: 500 - Main spindle power [kW]: 3.8 - Options: External cooling - Tools included: Yes - Transport dimensions: 2800mm x 1800mm x 2300mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hnedpfx Aasx Dicmsdjh Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table load: 14,000 kg, table length: 5,100 mm, overall weight: 35,000 kg, torque: 1,178 Nm, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, BRAND NEW BED-TYPE MILLING MACHINE Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN 19" TFT monitor HEIDENHAIN package: motors, measuring systems, and handwheel ICS: Internal coolant supply – 36 bar Additional Equipment: Drum-type tool changer with double gripper, 24 positions Double articulated belt chip conveyor (longitudinal), one at the front and one at the rear Hodpfjq Ixh Hox Aadenh Preparation for 4th axis (rotary table) Perimetric enclosure Accuracies: Positioning accuracy: 0.025 mm Repeatability: 0.008 mm Only inquiries from Germany will be answered.

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,200 mm, table load: 6,000 kg, table length: 1,600 mm, workpiece weight (max.): 6,000 kg, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, BRAND NEW BED TYPE MILLING MACHINE WITH ROTARY TABLE Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN 19" TFT display HEIDENHAIN package (motors, measuring systems, and handwheel) ICS: Internal coolant supply, 36 bar Hnodpfjhy At Aex Aadoh Rotary Table: 1600 x 1200 mm – double motor drive system Additional Equipment: Chain-type tool changer with double gripper, 40 positions Double hinged belt chip conveyor (longitudinal), one at the front and one at the rear Perimeter enclosure Accuracies: Positioning accuracy: 0.015 mm Repeatability: 0.008 mm Only inquiries from Germany will be answered.

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, torque: 1,178 Nm, coolant supply: 36 bar, Equipment: documentation/manual, rotational speed infinitely variable, BRAND NEW GANTRY MILLING MACHINE Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measuring systems, handwheel) Work Table: Plate table / rotary table / pendulum machining (depending on configuration) Additional Equipment: Tool changer with double gripper, 40 stations Hinged belt chip conveyor (longitudinal) Hnjdpfxohy Au Is Aadsh Work table per customer specification: plate table / rotary table / pendulum machining Accuracies: Positioning accuracy: ±0.030 mm Repeatability: ±0.008 mm Only inquiries from Germany will be answered.

Condition: new, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 9,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 62,000 kg, coolant supply: 36 bar, workpiece weight (max.): 62,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, FACTORY-NEW GANTRY MILLING MACHINE Controls and Drives: Two HEIDENHAIN TNC 640 digital path controllers (one at the front of the machine and one at the rear inside the enclosure) HEIDENHAIN package: motors, measuring systems, and handwheel Additional Equipment: Chain-type automatic tool changer with double gripper, 60-position magazine Double hinge-type chip conveyor (longitudinal), one at the front and one at the rear Hnedpfx Aaom Tv D Aodjh Accuracies: Positioning accuracy: ± 0.040 mm Repeatability: ± 0.008 mm Only inquiries from Germany will receive a response.

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 7,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 42,000 kg, coolant supply: 36 bar, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, Brand new travelling column milling machine Control and motors: Hnsdpfevrv Susx Aadjh Two HEIDENHAIN TNC 640 digital path controls – one at the front of the machine and one at the rear in the cabin 2 x HEIDENHAIN TFT 19" displays HEIDENHAIN package (motors, measuring systems, and handwheel) Additional equipment: Chain-type tool changer with double gripper, 60-tool capacity Double hinged belt chip conveyors (longitudinal), one at the front and one at the rear Accuracies: Positioning accuracy: ±0.040 mm Repeatability: ±0.008 mm Only inquiries from Germany will be responded to // Nur Anfragen aus Deutschland werden bearbeitet

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,200 mm, table load: 6,000 kg, table length: 1,600 mm, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, FACTORY-NEW BED TYPE MILLING MACHINE WITH ROTARY TABLE Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN TFT 19" display HEIDENHAIN package: motors, measuring systems, and handwheel ICS: Internal coolant supply - 36 bar Rotary Table: 1600 x 1200 mm - dual-motor drive system Additional Equipment: Chain-type tool changer with double gripper, 40 positions Double hinge belt chip conveyor (longitudinal), one at the front and one at the rear Full perimeter enclosure Accuracies: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Hnsdpfx Aaeff Hz Hsdjh Only inquiries from Germany will be answered.