Used Milling Head for sale (23,038)

Year of construction: 2012, condition: used, Serial number: AKS20xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20322 Description: We have a 2012 Bobcat Asphalt Mill for skid steer loader for sale. Iisdpfx Agswi Rpbs Noh Owner says it works as it should. Some rust on tilt cylinders. So some additional cost must be expected. Has a milling width of 50 cm. Ready for delivery

Year of construction: 1994, condition: good (used), Macmon M400 CNC with Heidenhain TNC 355 control Iodefmu E Ajpfx Ag Noih Manufacturer: Macmon Type: M400 CNC Control: Heidenhain TNC 355 Year of construction: 1994 Weight: 2700 kg Connected load: 12 kW Travel X: 630 mm Travel Y: 450 mm Travel Z: 380 mm clamping surface table: 800x500 mm spindle revolutions: 20-2780 rpm Steps: 2x continuous Spindle power: 5,5 kW tool holder: SK40/ISO40 Axle drive: 0-2000 mm/min Axis drive rapid traverse: 5000 mm/min quill stroke W: 100 mm Swivelling of the head: 2x90 Resolution measuring system: 0.001 mm positioning: +/- 0,02 mm Special features: protective housing to open, chip tray, quill stroke

Condition: used, Year of construction: 2007, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, table width: 5,500 mm, table length: 2,600 mm, total height: 4,900 mm, total width: 16,200 mm, total length: 9,000 mm, overall weight: 55,100 kg, CNC Floor Type Bed Milling Machine CNC Control Heidenhain iTNC 530 Controlled NC Table 1600 x 1600 mm Table dimensions 5500 x 2600 mm Movement X-axis 8000 mm Movement Y-axis 2100 mm Movement Z-axis 1300 mm Movement W-axis 1000 mm Iisdpfxexltbvs Ag Njh C-axis-swivel of milling head body 360 ° A-axis-swivel of milling head 180° Spindle speed 36 - 6.000 R/min Spindle motor 42 / 30 kW Spindle taper DIN 69871-SK 50 Tools in tool magazine 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2001, x-travel 400 mm y-travel 320 mm z-travel 450 mm Iijdpfxexndahs Ag Neh Control Haidenhain TNC 124 drive of main spindle 3 kW number of spindle speeds 63-3150 u/min tool taper SK 40 stroke of quill vertical 60 mm feed speeds 5-2000 mm/min rapid traverse 2 m/min work table: 800x320 mm coolant 20 l/min total power requirement 5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,2x2,4x1,6 m

Year of construction: 1980, condition: used, Manufacturer MAHO Type MAHO 900 Isdsb D Iv Tepfx Ag Neih Year of manufacture 1980 Operating hours 45000 Accessories: Various tool holders SK50 Space requirement machine (LxWxH) 4800 x 3600 x 2400 Loading dimensions machine (LxWxH) approx. 4m x 2,1m x 2,5m Weight machine 5600 kg

Year of construction: 1989, condition: good (used), Machine: Control Heidenhain TNC 355 Built in 1989 Travel: X 600 mm method path Y 450 mm process path Z 400 mm method Spindle speed 20 – 4000 min-1 Angular size 850 x 440 mm Swivel cull 650 x 395 mm Electronic hand wheel Ioded I Uwmspfx Ag Njih The machine is still under power and is in good condition.

Year of construction: 1973, condition: used, Travel 800 x 500 x 450 mm Table load approx. 600 kg Ijdpsb S Ivuefx Ag Njih Weight approx. 4 t.

Condition: good (used), Year of construction: 1983, Maho 700 C, year of manufacture 1983 Travel paths X/Y/Z: 700 mm/500 mm/450 mm Table dimensions X/Y: 900 mm/500 mm Spindle mount: ISO 40 Iiedpfx Agjwya U Uo Neh Spindle speed: 3150 rpm Spindle stroke: 100 mm Weight: approx. 3500 kg Controller: Philips CNC 432

Condition: good (used), Year of construction: 1984, Milling machine - horizontal drilling machine Brand: Bohle Type: BWS 120 Ijdpfxevvldns Ag Noih Year of manufacture: 1984 Voltage: 380 V Power: 22 kW Longitudinal displacement in X: 1800 mm Transverse movement in Y: 600 mm Vertical movement in Z: 600 mm Overall dimensions: 3.80 mx 5.4 mx 3.2 m Weight: 9500 kg

Condition: good (used), gebr. dividing head with a 3 jaw Röhm chuck dia 140 mm Iedeipic Iopfx Ag Nsih

Condition: good (used), Indexable inserts milling cutter, Sandvik Coromill 200 Iiedpfx Agsip Dyij Neh Diameter 200 mm with packing

Year of construction: 1978, condition: good (used), Ravensburger, type KT 45, year 1978 Iiodpfx Agskyukdj Noh Center height over bed 600 mm Center distance face plate to support 450 mm Face plate diameter 1,000 mm turning diameter in the recess max. 1.350 mm with digital display Power 18,5 kW

Year of construction: 2006, condition: excellent (used), Swing angle 135 Motor 1.1 kW table height 860 mm table surface 800×1000 mm spindle dimension 28 x 90 mm Iiodpfx Agohr D Aye Neh spindle speed 1500 rpm with feed unit: Fields S/308, year 2011 and accessories

Condition: good (used), Year of construction: 1990, CNC milling machine, lid, FP4-AT, 3 axes X 560/Y500/Z450 speed range 40-4000 min-1 control Contur-3, SK-40 record, weight 3.4 tons. Isdpfx Aodygdhjg Noih

Condition: good (used), Year of construction: 1985, Technical Data – Bridgeport Series I Table Size / Work Area 9″ × 49″ (approx. 299 mm × 1245 mm) T-Slots 3 slots, spacing 2.5″ (approx. 64 mm), slot width 0.625″ (approx. 16 mm) Travel Paths X (Longitudinal) without power feed: 36″ (approx. 914 mm) with power feed: 33″ (approx. 838 mm) Traverse Y (Cross Travel) 12″ (approx. 306 mm) Quill Stroke (Quill Travel) 5″ (approx. 127 mm) Knee Travel (Z-Axis/Table Elevation) 16″ (approx. 406 mm) Ram Travel (Headstock Fore/Aft on Ram) 12″ (approx. 306 mm) Min./Max. Distance Spindle Axis to Table Top (Spindle to Table Surface) min: 2.5″ (approx. 64 mm) max: 18.25″ (approx. 463 mm) Isdpfxjxl R N Dj Ag Neih Min./Max. Distance Spindle to Column Front (Min./Max. Throat) min: 6.75″ (approx. 171 mm) max: 18.75″ (approx. 476 mm) Spindle / Quill Spindle diameter: 1.875″ (approx. 48 mm) Quill diameter: 3.375″ (approx. 86 mm) Spindle taper (standard): R-8 Spindle Motor / Power 30 min. rating: 3 HP (approx. 2.2 kW) Continuous duty: 2 HP (approx. 1.5 kW) Spindle Speed Range (variable, two speed ranges) Low: 60 – 500 rpm High: 500 – 4200 rpm Drilling Capacity (Power Quill Feed, mild steel) approx. 3/8″ (approx. 9.5 mm) Milling Capacity (mild steel, cutting) approx. 2 CI/min (Cutting Inches per Minute) Drilling Radius (mild steel) up to Ø 6″ (approx. 152 mm) Traverse Speeds (X/Y) manual / automatic up to 100 ipm (approx. 2540 mm/min) in CNC models Machine Footprint & Height Floor space: 84″ × 120″ (approx. 2140 mm × 3048 mm) Overall height: 87″ (approx. 2210 mm) Net Weight / Shipping Weight Net weight: approx. 1930 lbs (approx. 875 kg) Maximum Workpiece Weight (on table) approx. 750 lbs (approx. 340 kg)

Condition: good (used), used dividing head with a 3 jaw chuck from Röhm (110 mm). Ijdpfx Agevtqllj Njih

Condition: used, Year of construction: 1984, Technical data: Longitudinal travel (x-axis) 15,900 mm Horizontal feed path (z-axis) 790 mm Vertical feed path (y-axis) 500 mm Swivel range of the milling spindle 45°F +/- Milling spindle drive power of the DC motor 50 kW Milling spindle diameter in the front bearing 160 mm Inside tool holder ISO No. 50 DIN 2079 Outside tool holder ISO No. 60 Tool feed - manual via threaded rod M24 Spindle speeds continuously adjustable in 2 ranges from 50-500 rpm. Speed range in the 1st stage 50-250 rpm. Speed range in the 2nd stage 100-500 rpm. Step step 1:2 Range of constant power 160 rpm. Max. torque on the milling spindle 2,000 Nm Milling feed in the x-direction continuously adjustable from 40-4,000 mm/min. Rapid traverse 8,000 mm/min. Adjustment speed in the y and z-direction continuously adjustable from 20-500 mm/min. Rapid traverse for the y and z-axis 1,000 mm/min. Max. swivel speed for the milling spindle 2°/sec. Display resolution of the 3 axes (positioning accuracy) 0.1 mm Operating voltage 380 volts 50 Hz Control voltage 220 volts Distance from the clamping table to the retracted, horizontally positioned milling spindle nose 500 mm Distance from the cheek support (floor) to the middle of the milling spindle in the vertical middle position 1,300 mm Distance from the clamping table to the middle of the support guide 2,300 mm Length of the cheek and support guide 16,800 mm Iisdpfsvvll Ssx Ag Nsh Weight approx. 23,000 kg Defects: some leaks on the clamping cylinders

Condition: good (used), various accessories for a Bridgeport milling machine according to photo Isdpfx Agoipidae Nsih 3 jaw chuck, face plates, cutters, collets and much more.

Condition: excellent (used), Walter cutterhead, type: F3042B080Z0515 Iiodpfoqgc Thex Ag Neh

Condition: used, branded milling machine, Stanko type 6175 Travel X/Y/Z: 320/210/300 mm Spindle speed: 50 - 2040 rpm Feed speed: 13 - 395 mm / min Drive power: 1.5 kW Tool holder: 4 MK Groove width: 14 mm Number of grooves: 3 pieces Iedpfotrl D Sex Ag Noih Groove spacing: 50 mm

Year of construction: 1988, condition: good (used), Tool milling machine make: INFRATIREA, type: FUS-32, year 1988 Technical data: table 950 x 450 mm travels X / Y / Z: 500 / 320 / 400 mm spindle speeds 25 - 2000 rpm with digital display Isdpjhaq T Tofx Ag Noih

Year of construction: 1969, condition: good (used), Univ. tool milling machine DECKEL type FP 1 Machine No. 37101 Year of construction approx. 1969 travel X: 300 mm Y: 150 mm Z: 340 mm table size 600 x 200 mm spindle mounting MK 4 - S20 x 2 Ijdpfol Dx I Sex Ag Noih spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 1,0 and 1,5 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base - pinol shift at vertical milling head 60 mm - adjacent control cabinet space requirement L x W x H 1000 x 900 x 1750 mm weight 690 kg good condition accessories: - collets - rotary table - vice - Counterholder H. Milling

Condition: good (used), Travel xyz 400 x 300 x 370 mm Angled table inclinable 380 x 700 mm Isdpfxou T I D Tj Ag Noih Spindle holder SK 40 rpm 40 - 1.500 Horizontal and vertical spindle The machine was used very little.

Year of construction: 1989, condition: good (used), 1 used CNC milling machine, make TOS, type FNG 63 traverse paths: X 800 mm Iiodpjgd Dcqefx Ag Noh Y 500 mm Z 630 mm Heidenhain control

Year of construction: 1995, condition: good (used), travels: x=1600mm Y=800mm Z=900mm Iiedoh Nuhrjpfx Ag Nsh spindle speed max. 2000 revolutions per minute Control HH 407 A Cover of z axis present but defective.