Used Minarctig Evo for sale (1,831)

Condition: ready for operation (used), Technical characteristics Double loading Advance by pneumatical tightening 2 motors Hnjdjundguspfx Ag Neu Double blade : 250 and 175 mm Tables Power and Motors Voltage: 380 V Pluging: Three-phased Power: 3,5 Kw Overall dimensions

Condition: new, Year of construction: 2023, rebar bending machine evo 36 Hnodpfx Ajhiyadog Nju 400 Volt 50 Hz 3 ph. capacity up to 36 mm at R=65kg/mm2 weight 320 kg with 6 round tooling 50-60-70-80-95-120 mm 1 pc. square bolt foot pedal CE declaration

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN control MillPlus iT table surface area ø 500 x 380 mm B-axis 0 - 161,955 ° C-axis 360 ° spindle taper SK 40 spindle turning speed range 20 - 18.000 U/min spindle power max. 35 kW max. torque on the spindle max. 130 Nm feeds -stepless- bis 20.000 mm/min rapid traverse X/Y/Z axis 80 / 50 / 50 m/min rapid traverse B-axis 40 U/min C-axis rapid feed 50 U/min no. of tools in magazin 30 tool diameter if 2 vacant positions 130 mm tool diametre at full load 80 mm tool length - max. 300 mm weight of tools max. 6 kg internal coolant system feed 40 bar total power requirement 52 kVA Hsdpowlvi Eefx Ag Nonu weight of the machine ca. 6 t = 5-axis machining center with 2-axis NC swivelling rotary table Accessories: electron. handwheel, chip conveyor, coolant, band filter device

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 4,624 h, load capacity: 1,800 kg, lifting height: 5,475 mm, free lift: 1,869 mm, fuel type: electric, mast type: triplex, construction height: 2,471 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-Wheel Forklift Load center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Double pedal Condition: Refurbished without warranty Hnedpfx Agswwdcqe Nju Technical condition: Good Front tire type: Superelastic Front tire size: 200/50-10 Front tire condition: New Rear tire type: Superelastic Rear tire size: 140/55-9 Rear tire condition: New Battery voltage: 48V Battery capacity: 625Ah Battery manufacturer: Hawker Battery type: PzS Battery year: 2019 Battery condition: 60 - 80% Description: Handover with new FEM 4004 inspection including inspection book. If you have further questions, feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to offer you leasing & financing as well as delivery at attractive rates. Trade-in of Linde equipment is also possible – even if you do not purchase a machine from us. The specified operating hours were read at the time of listing. Subject to prior sale, changes, and errors. Sideshift, fork positioner, Integrated Kaup fork positioner with sideshift 3rd valve, 4th valve, rear work light, front work light, half cab, full free lift, safety light, seat heating, Red/white LED light bar front and rear, beacon, Bluespot front and rear.

Condition: used, functionality: fully functional, machine/vehicle number: H2X393V04103, Year of construction: 2019, operating hours: 5,337 h, load capacity: 3,000 kg, lifting height: 4,805 mm, free lift: 1,474 mm, fuel type: diesel, mast type: triplex, construction height: 2,241 mm, fork length: 1,380 mm, empty load weight: 4,925 kg, drive type: Diesel, Diesel forklift truck Chassis Number: H2X393V04103 Hjdswrukbepfx Ag Nenu Load Centre: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Condition: Ready for operation and fully functional Technical Condition: Good Front Tyres Type: Superelastic Front Tyres Condition: 60 - 80% Rear Tyres Type: Superelastic Rear Tyres Condition: 80 - 100% Description: Workshop inspected with UVV safety approval Load guard, side shifter, fork positioner, Kaup attachment 3rd valve, rear work light, front work light, heating, full cab, air conditioning, CE certificate, joystick, beacon, windscreen wiper, seat heating, Blue Spot front & rear, comfort seat with seat heating

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 0 h, machine/vehicle number: plate roll, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG EVO, controller model: EVO 4 AXIS, number of rollers: 4, roller (bottom) diameter: 140 mm, roller (top) diameter: 160 mm, side roll diameter: 150 mm, roller diameter: 200 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, overall weight: 2,200 kg, total length: 3,200 mm, total width: 1,100 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BRAND MG ITALY, HYDRAULIC MODEL M2006P EVO_CNC PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BENDING CNC_EVO PROGRAMMABLE AUTOCALCULATION AUTOMATIC PLATE ROLLING Hedpjw Dnd Sjfx Ag Nenu Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls -useful width mm. 2050 -Top roll mm. 160 - Lower roll mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, with adjustable force upon the input of plate thickness • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller on touch screen 15” , CAD/CAM interface 4 axis auto calculation software package. with digital readout of the axis for use in manual rolling, semiautomatic and fully automatic programmable. • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service.

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, As an OPTION we can offer a workpiece storage Eco-Tower 60 and a handling system LANG Technik GmbH. Control: 3D path control including 15" TFT screen Siemens 840 D solutionline with ShopMill Open user interface TECHNICAL DATA Travel range. X-axis (longitudinal) 500 mm Y-axis (transverse) 450 mm Z-axis (vertical) 400 mm Drive power (40/100% ED) 35/25 kW Speed range 20 - 18000 1/min Tool holder SK 40 NC swivel rotary table Clamping surface ø 500 x 380 mm B-axis swivel range 0/+ 108° C-axis swivel range 300° Tool changer (chain magazine) Number of tool positions 60 EQUIPMENT/ACCESSORIES  NC swivel rotary table with B and C axes and absolute measuring system including drive cooling of the B and C axes  Chain magazine with 60 tool positions with double gripper Hjdpfxjvtaxus Ag Nenu  Infrared measuring probe Heidenhain TS 649  Laser tool measurement for measuring tool length and diameter Calibration mandrel with tool holder  Internal coolant supply, 40/80 bar switchable; Delivery rate 23 l/min/11 l/min, container size 980 l Paper belt filter  IKZ = internal coolant supply 40/80 bar  Rotating viewing window  Sealing air for linear measuring system  Coolant unit for spindle and drives  Active control cabinet cooling  Oil emulsion mist separator with electrostatic filter  Flushing gun for chip flushing  Blowing air through the center of the spindle, selectable via M function  Chip conveyor, designed for 60 magazine positions  Operating mode 4; Process monitoring in production  Absolute position measuring systems in all axes (X, Y, Z, B + C)  Preparation for automatic handling system (loading through side window)  Installation elements  Documentation

Condition: used, Year of construction: 2016, operating hours: 2,256 h, load capacity: 3,500 kg, lifting height: 4,900 mm, fuel type: diesel, construction height: 3,150 mm, gearing type: automatic, Equipment: cabin, head guard, Linde forklift H35D EVO FIN: G04614 * 2,256 operating hours * Tires front and rear solid rubber * Duplex mast * Hydraulic connections for shovel/reversible fork * Fork tines 1200mm * Heating Hnjdpfx Aget Aqvlo Nju * Radio * Load capacity 3.5 t * Overall height 3.15m Other: * 1 previous owner * UVV New general inspections/safety tests or weight reductions/increases are available on request. We are happy to help you obtain export/transfer license plates, and we can also transfer your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing and spelling errors, changes, prior sale and errors reserved!----Who are we? Leible Commercial Vehicles is a family business based in Kehl am Rhein. Thanks to our many years of experience in the areas of reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Commercial Vehicles lies in the sales of new and used commercial vehicles. A wide range of vehicles can be found on 11,000 square meters. Our corporate philosophy is characterized by fairness and seriousness. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who supports them when buying or selling vehicles. See for yourself! Our service for you: Loading vehicles We are happy to help you load the vehicles you have purchased. Organizing special transports We are happy to help you organize special transports. Day numbers / export license plates We are happy to help you obtain export license plates / short-term license plates. Completing customs formalities We are happy to help you with customs matters.

Condition: new, MEP SHARK 382-1 SXI EVO metal band saw Hydraulic semi-automatic. MEP dealer - please send us your inquiry motor power 1,5 / 1,8 kW Bench opening 385 mm belt dimensions 3770 x 27 x 0,9 mm weight 695 kg Speed 40/80 m/min. cutting area 0° 300 / 250x250 / 380x250 cutting area 45° right 260 / 250x250 / 300x200 Cutting area 45° left 240 / 210x210 / 280x160 Cutting area 60° right 180 / 170x170 / 200x170 Cutting area 60° left Description Electro-hydraulic, semi-automatic band saw with additional manual and Hedog Hzxispfx Ag Njnu semi-automatic dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical posts. 420 mm rotary table on roller bearing with preloaded thrust bearing and interchangeable steel inserts. Double belt speed (40/80 m/min.).

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 6,500 h, load capacity: 5,000 kg, lifting height: 5,365 mm, free lift: 1,864 mm, fuel type: gas, mast type: triplex, construction height: 2,625 mm, fork carriage width: 1,350 mm, drive type: Treibgas, construction width: 1,350 mm, LPG forklift Load center of gravity: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Gearbox: Hydrostatic / 2-pedal Speed class: 20 Condition: Reconditioned without guarantee Technical condition: good Front tires type: Superelastic Front tires size: 300-15 NEW Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires size: 250-15 Rear tires condition: 80 - 100% Description: Handed over with new FEM 4.004 test including test book If you have any further questions, please call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik We will be happy to enquire about leasing & financing as well as delivery at favourable conditions. It is also possible to trade in Linde equipment - even without purchasing a device from us. The operating hours shown were read off as of the date of entry. Subject to prior sale, changes and errors. Forklift, Attachments on request Hnsdpewr N Tdjfx Ag Neu 3rd valve, 4th valve, rear work light, front work light, heating, STVZO, full cabin, full free lift, safety light, outside mirror, dust pre-separator, blue spot, double bottle holder, STVO equipment

Condition: used, functionality: fully functional, machine/vehicle number: H2X393G05194, Year of construction: 2016, operating hours: 6,650 h, load capacity: 3,000 kg, lifting height: 4,805 mm, free lift: 1,474 mm, fuel type: gas, mast type: triplex, construction height: 2,241 mm, fork length: 1,100 mm, empty load weight: 5,136 kg, drive type: Treibgas, LPG Forklift VIN: H2X393G05194 Load Center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Triplex Hsdpswba Eisfx Ag Njnu Condition: Ready for use and fully functional Technical Condition: Very good Front Tires Type: Superelastic Front Tires Condition: 60 - 80% Rear Tires Type: Superelastic Rear Tires Condition: 80 - 100% Description: Workshop tested with accident prevention approval Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heating, load backrest, solenoid valve, road traffic regulations (StVZO), full cab, air conditioning, full free lift, CE certificate, interior mirror, joystick, windshield wiper, single pedal, air-suspended seat

Condition: used, Year of construction: 2009, functionality: fully functional, For sale is a used, fully functional semi-automatic miter band saw. 0° 330 mm 320 mm 450 x 320 mm + 45° 320 mm 300 mm 300 x 300 mm + 60° 210 mm 200 mm 200 x 200 mm - 45° 320 mm 300 mm 300 x 300 mm - 60° 210 mm 200 mm 200 x 200 mm Max. vise opening 455 mm Blade size 4500 x 34 x 1.1 mm Saw blade motor power 4.0 kW - three-phase Blade speed 15 - 100 m/min Hnodpfx Agjwigavj Nju Accessories: 4.5 m roller conveyor, various saw blades

Condition: excellent (used), Year of construction: 2008, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, As an OPTION we can offer a workpiece storage Eco-Tower 60 and a handling system LANG Technik GmbH. Control: 3D path control including 15" TFT screen Siemens 840 D solutionline with ShopMill Open user interface TECHNICAL DATA Travel range. X-axis (longitudinal) 750 mm Y-axis (transverse) 600 mm Z-axis (vertical) 520 mm Drive power (40/100% ED) 35/25 kW Speed range 20 - 18000 1/min Tool holder SK 40 NC swivel rotary table Clamping surface ø 700 x 500 mm B-axis swivel range 0/+ 102° C-axis swivel range 300° Hnjdpjvtar Isfx Ag Neu Tool changer (chain magazine) Number of tool positions 120 EQUIPMENT/ACCESSORIES  NC swivel rotary table with B and C axes and absolute measuring system including drive cooling of the B and C axes  Chain magazine with 120 tool positions with double gripper  Infrared measuring probe Heidenhain TS 649  Laser tool measurement for measuring tool length and diameter Calibration mandrel with tool holder  Internal coolant supply, 40/80 bar switchable; Delivery rate 23 l/min/11 l/min, container size 980 l Paper belt filter  IKZ = internal coolant supply 40/80 bar  Rotating viewing window  Sealing air for linear measuring system  Coolant unit for spindle and drives  Active control cabinet cooling  Oil emulsion mist separator with electrostatic filter  Flushing gun for chip flushing  Blowing air through the center of the spindle, selectable via M function  Chip conveyor, designed for 120 magazine positions  Operating mode 4; Process monitoring in production  Absolute position measuring systems in all axes (X, Y, Z, B + C)  Preparation for automatic handling system (loading through side window)  Installation elements  Documentation

Condition: used, functionality: fully functional, machine/vehicle number: H2X392F01684, Year of construction: 2015, operating hours: 5,995 h, load capacity: 2,500 kg, lifting height: 3,700 mm, free lift: 200 mm, fuel type: diesel, mast type: standard, construction height: 2,450 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Fahrgestellnummer: H2X392F01684 Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Transmission: Hydrostat Technical condition: Very good Front tires Type: Superelastic Front tires Condition: 80 - 100% Hnedpfxetfmgde Ag Nju Rear tires Type: Superelastic Rear tires Condition: 80 - 100% Description: Workshop checked, new UVV & inspection, new paintwork Sideshift, 3rd valve, rear working lights, front working lights, roof cover, windshield, CE certificate,

Condition: new, MEP SHARK 282 SXI evo [Semi-automatic] All MEP models on request ! Motor power 1,5/1,8 kW Bank opening 285 mm belt dimensions 2950x27x0,9 mm Weight 485 Kg Speed 36/72 m/min. cutting surface 0° 250 / 220x220 / 280x220 cutting surface 45° right 230 / 200x200 / 220x200 Cutting area 45° left 200 / 170x170 / 200x140 Cutting area 60° right 120 / 80x80 / 140x80 Cutting area 60° left Description Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic manual function, has MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At cycle start occurs: - Vise closes and motor starts - Saw head lowers for cut - Motor shuts off - Saw head raises - Vise opens. Semi-automatic dynamic system (manual lowering of the saw band to the desired position and cycle start via the manual button). Some features: New centralized control panel on articulated arm to allow the operator to easily switch from any working position. Control panel with low voltage: Membrane keypad in polyester with thermoformed highlighted Push buttons and actuation control signal. Hnsdpocgbq Ijfx Ag Nsu Display to show: * Diagnostics (messages in user language). * Alarms (description of alarm causes) * Status of inputs and outputs * Counting of the cuts * Time used for the performed cut * Current consumption of the saw band motor * Saw band tension * Saw band speed * Numerical display of the head position. Switch handle IP55 of the manual 24 V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for particular applications. New hydraulic control unit of the latest generation, highly efficient and with low energy consumption. Large work surface with turntable mounted on roller bearings, of 265 mm with preloaded thrust bearing. Double speed of the belt (36/72 m/min.) with control. Provided for the inclusion of an electronic inverter for the continuous regulation of the band speed from 20 to 90 m/min. Stroke of the saw bow programmable directly from the control panel, for adaptation to the material to be cut. Clamping device laterally movable to the left and right, with quick-action vice. Manually operated band tension control with display on the screen by means of electronic converter. Base frame with extendable coolant tray. Electric coolant pump for cooling and lubrication of the saw band. Preparation for the installation of the minimum lubrication kit of the saw band (optional), in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is designed for lift truck transport. Length stop for cuts of the same length material support arm with roller, for fixing the loading platform Bimetal saw band for solid and profiled material. Tools and instructions for use in the user's language. For further technical data, please refer to the attached PDF document.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 7,473 h, load capacity: 3,500 kg, lifting height: 4,805 mm, free lift: 1,474 mm, fuel type: diesel, mast type: triplex, construction height: 2,241 mm, fork carriage width: 1,150 mm, drive type: Diesel, Diesel forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrostatic / 2-pedal Condition: Refurbished without warranty Technical condition: good Front tire type: Super elastic Front tire size: 27x10-12 NEW Front tire condition: 80 - 100% Rear tire type: Super elastic Rear tire size: 23x9-10 NEW Rear tire condition: 80 - 100% Description: Handover with new FEM 4.004 inspection including inspection booklet. The price includes refurbishing incl. maintenance, new paint job, new tires. For further questions, please call us. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. Leasing & financing as well as delivery at favorable conditions can be requested. Trade-in of Linde equipment is also possible – even if you do not purchase a device from us. Specified operating hours were read off at the time of listing. Subject to prior sale, changes, and errors. Hnodpfx Aewr N S Hsg Nou Clamp fork, reach fork, Attachments on request 3rd valve, 4th valve, rear work light, front work light, heater, soot filter, full cabin, air conditioning, full free lift, safety light, seat heating, LED,

Condition: used, functionality: fully functional, machine/vehicle number: H2X386H08658, Year of construction: 2017, operating hours: 6,534 h, load capacity: 1,600 kg, lifting height: 3,200 mm, free lift: 15,190 mm, fuel type: electric, mast type: duplex, construction height: 2,005 mm, fork length: 1,200 mm, empty load weight: 3,370 kg, drive type: Elektro, Electric 3-wheel forklift truck Fahrgestellnummer: H2X386H08658 Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Front tires Type: Superelastic Front tires Condition: 60 - 80% Hjdpfx Agsu D Stie Nsnu Rear tires Type: Superelastic Rear tires Condition: 80 - 100% Battery Volt: 48V Battery Ah: 690Ah Battery year of construction: 2017 Battery condition: 80 - 100% Description: Workshop tested with UVV approval rear tires are renewed Sideshift, 3rd valve, rear working lights, front working lights, windshield, full free lift, CE certificate,

Condition: ready for operation (used), Year of construction: 2007, The TAE evo 602/P3 chiller is a compact machine designed for use in industry (but not only), equipped with hermetic scroll compressors, a built-in ~3Bar pump and an innovative finned evaporator mounted inside a hydraulic buffer tank. Refrigerant is R407C. Designed to work in pressure (closed) systems but can works in open type circuits. Capacity ~110kW for +12/7°C and +35°C. We provide 3-month guarantee (concerns the area of Poland). The transport service is not included. Hodpfxopuh Aqj Ag Nenu

Condition: new, MEP COBRA 352 SX evo [Semi-automatic] Article number CB352SX motor power 1,5/2,2 kW belt opening 180 mm belt dimensions 350x32x3,4 Weight 285 Kg Speed 1700/3400 1/min. Hnodpechkv Iofx Ag Nju Cutting surface 0° 120 / 105 / 180x70 Cutting surface 45° right 120 / 100 / 135x60 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description Semi-automatic circular saw for sawing of solid and hollow aluminum materials and light alloys with electro-welded carbide tooth wheel. Basic equipment: -Machine for miter cuts from 45° right to 45° left. -Alignment along the vertical gives the possibility of sawing operations with head inclined between 0° and 45° left. -* MEP represents the latest generation of controls designed for semi-automatic machines with single axis microprocessors. -CHARACTERISTICS: At the start of the cycle: - Vise closes and motor starts - Saw head lowers for cut - Motor stops - Saw head raises - Vise opens. -New - Display with 16 characters x 2 lines for displaying the following technical parameters: + number of executed cuts + cutting time + ammeter + display of over 100 diagnostic messages and warnings. -New - Display and entry of the alarm and error messages with the possibility of displaying the incidents that have occurred. Electrical equipment: -New - Low voltage control panel: membrane polyester keypad with thermoformed and highlighted push buttons and actuation control signal. -Saw blade stroke programmable directly from the control panel, to adapt to the cutting material. -Ball bearing mounted rotary table to ensure easy and accurate rotation. -Clamping system consisting of two face vices that can be freely arranged along the longitudinal axis of the parts. -Adjustable mechanical stops for quick positioning of the head in the angular positions at 0° and 45° right and left. -Swarf extractor with preparation for OPTIONAL extraction system. -Automatic saw blade lubrication system, operating only at the start of the cut. -Machine is supplied without saw blade. -Preparation for the installation of the minimal lubrication kit of the saw blade (OPTIONAL), besides the conventional standard lubrication with emulsion oil. -Tool and instruction manual with spare parts list. For further technical data, please refer to the attached PDF document. Catalog 2nd page !

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 8,974 h, load capacity: 2,500 kg, lifting height: 6,465 mm, free lift: 2,274 mm, fuel type: gas, mast type: triplex, construction height: 2,804 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Treibgas, LPG forklift Load center of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Gearbox: Hydrostatic / 2-pedal Condition: Reconditioned without guarantee Technical condition: good Front tires type: Superelastic Front tires size: 23x9-10 NEW Front tires condition: 80 - 100% Hsdpfxewr N Ste Ag Nsnu Rear tires type: Superelastic Rear tires size: 23x9-10 NEW Rear tires condition: 80 - 100% Description: Handed over with new FEM 4.004 test including test book If you have any further questions, please call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik Leasing & financing as well as delivery at favorable conditions. We will be happy to inquire for you. It is also possible to trade in Linde equipment - even without purchasing a device from us. The operating hours shown were read off at the time of entry. Subject to prior sale, changes and errors. Sideshift, fork positioner, Durwen fork positioner 3rd valve, 4th valve, rear work light, heating, STVZO, full cabin, air conditioning, full free lift, safety light, Double bottle holder

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 6,761 h, load capacity: 2,000 kg, lifting height: 4,250 mm, free lift: 150 mm, fuel type: diesel, mast type: duplex, construction height: 2,746 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center of gravity: 500 Hnjdpfx Aowr N Sgjg Nsu ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Gearbox: 1-pedal control Condition: Reconditioned without guarantee Technical condition: good Front tires type: super elastic Front tires size: 200/50-10 NEW Front tires condition: 80 - 100% Rear tires type: super elastic Rear tires size: 18x7-8 NEW Rear tires condition: 80 - 100% Description: Handed over with new FEM 4.004 test including test book. Conversion to double pedal possible! If you have any further questions, please call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik We will be happy to enquire about leasing & financing as well as delivery at favourable conditions. It is also possible to trade in Linde equipment - even without purchasing a device from us. The operating hours shown were read off at the time of entry. Subject to prior sale, changes and errors. Side shift, fork positioner, integrated fork positioner with side shift 3rd valve, 4th valve, rear work light, front work light, half cabin, single pedal, LED,

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,303 h, load capacity: 2,000 kg, lifting height: 3,150 mm, free lift: 1,560 mm, fuel type: electric, mast type: duplex, construction height: 2,121 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Gearbox: 1-pedal control Condition: Ready for use and fully functional Technical condition: good Front tires type: Superelastic Front tires size: 200 50 10 Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires size: 140/55-9 Rear tires condition: 60 - 80% Hnsdpfx Aswr N Sasg Nju Battery voltage: 48V Battery Ah: 750Ah Battery manufacturer: IBB Battery type: PzS Battery year of manufacture: 2016 Battery condition: 60 - 80% Description: Handover with new FEM.4004 test including test book If you have any further questions, please call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik Leasing & financing and we will be happy to inquire about delivery at favorable conditions for you. Linde equipment can also be traded in - even without purchasing a device from us. The operating hours shown were read off at the time of entry. Subject to prior sale, changes and errors. Sideshift, 4th valve up to fork carriage / sideshift integrated 3rd valve, 4th valve, rear work light, front work light, roof cover, full free lift, safety light,

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 6,752 h, load capacity: 1,600 kg, lifting height: 3,070 mm, free lift: 1,474 mm, fuel type: electric, mast type: duplex, construction height: 2,080 mm, fork carriage width: 980 mm, fork length: 1,000 mm, drive type: Elektro, Electric 4-wheel forklift Load centre of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Gearbox: 1-pedal control Condition: Ready for use and fully functional Technical condition: good Front tyres type: super elastic Front tyres size: 18x7-8 Front tyres condition: 60 - 80% Rear tyres type: super elastic Rear tyres size: 16x6-8 Rear tyres condition: 60 - 80% Battery voltage: 48V Battery Ah: 625Ah Battery manufacturer: GNB Battery type: PzS Battery year of manufacture: 2017 Hnodpfx Aewr N R Ajg Nju Battery condition: 80 - 100% Description: Handed over with new FEM 4.004 test including test book If you have any further questions, call Please feel free to contact us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik Leasing & financing as well as delivery at favorable conditions. We are happy to inquire for you. Trade-in of Linde devices is also possible - even without purchasing a device from us. The operating hours shown were read off at the time of entry. Subject to prior sale, changes and errors. Side shift, integrated side shift 3rd valve, rear work light, front work light, full free lift, safety light, seat heating, LED,

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 9,225 h, load capacity: 3,500 kg, lifting height: 4,805 mm, free lift: 1,474 mm, fuel type: diesel, mast type: triplex, construction height: 2,241 mm, fork carriage width: 1,150 mm, fork length: 1,350 mm, drive type: Diesel, Diesel Forklift Load Center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Triplex Transmission: Hydrostatic / 2-Pedal Condition: Ready for use and fully functional Technical Condition: Good Front Tires Type: Super Elastic Front Tires Size: 27x10-12 NEW Front Tires Condition: 80 - 100% Rear Tires Type: Super Elastic Rear Tires Size: 23x9-10 NEW Rear Tires Condition: 80 - 100% Description: Delivered with a new FEM 4.004 inspection and inspection book. The price includes refurbishment, maintenance, new paint, and new tires. If you have any further questions, please feel free to call us. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We're happy to inquire about leasing and financing, as well as delivery at favorable terms. Part-exchange of Linde equipment is also possible – even without purchasing a unit from us. Reported operating hours were read as of the date of entry. Subject to prior sale, changes, and errors. Attachments available upon request. 3rd valve, 4th valve, rear work light, front work light, heater, solenoid valve, soot filter, full cab, air conditioning, full free lift, safety light. Hodpfx Ajwmtnbog Nsnu

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 7,168 h, load capacity: 8,000 kg, lifting height: 3,050 mm, free lift: 150 mm, fuel type: diesel, mast type: standard, construction height: 2,880 mm, fork carriage width: 2,200 mm, fork length: 2,000 mm, drive type: Diesel, Diesel forklift Load centre of gravity: 900 Hodpfx Aowl R Rqog Nenu Fork width: 200 mm Fork thickness: 70 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: standard Gearbox: double pedal Technical condition: good Front tires type: super elastic Front tires size: 8.25-15 Front tires condition: 80 - 100% Rear tires type: super elastic Rear tires size: 300-15 Rear tires condition: 80 - 100% Description: If you have any further questions, please call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik Leasing & financing as well as delivery at favorable conditions. We will be happy to inquire for you. It is also possible to trade in Linde equipment - even if you do not purchase a device from us. The operating hours shown were read off at the time of the entry. Subject to prior sale, changes and errors. Side shift, fork positioner, Durwen fork positioner with side shift 3rd valve, 4th valve, rear work light, front work light, heating, full cabin, air conditioning, Comfortable fabric seat, vehicle lighting in accordance with the German Road Traffic Act, 20 km/h limit, flashing light, Linde Safety Pilot SP active