Used Sawmill Operations for sale (26,939)

Condition: refurbished (used), A complete used sawline is available for sale. The first sawing stage includes an edger, and the second stage features profiling machines. All conveyors and components are included. The line will be fully refurbished mechanically; the electrical system is complete but sold as is. Please inquire for pricing and further details. Njdpfxowa Nrpj Adtjcr

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, cutting length (max.): 5,000 mm, cutting height (max.): 50 mm, cutting width (max.): 300 mm, Equipment: documentation/manual, We offer this very good Brodbaek BCO Edger Infeed Conveyors for sawmill (stationary), year of construction 2012. Manufacturer: Brodbaek Model: BCO Edger Year of manufacture: 2012 Dimensions before Edging: Width minimum: 75mm Width maximum: 300mm Thickness: 15mm – 50mm Length: 2.1m – 5.0m Dimensions After Edging: Width minimum: 75mm Width maximum: 200mm Thickness: 15mm – 50mm Length: 2.1m – 5.0m Waterfall conveyor • Including sub frame for the waterfall conveyor • Height adjustable legs to ensure ease of installation • Designed to singulate the boards Ncedsyw Sx Hspfx Adtjr • Reject board facility • Dogs designed to pick up 16mm - 38mm thick boards, • Waterfall works automatically with sensors • High Quality Conveyor Chain • Rotating arm to knock off 2nd board as it travels up waterfall • Board singulation controlled automatically by 2 sets of arresting fingers • Accelerate the board • High Quality Conveyor Chain • 12 Sensors from above to measure wane on the boards, • Rollers to ensure the board is fair ended Infeed Kick in chain - all pieces centralised to the infeed chain

Condition: used, Hydraulic power chuck cylinder for actuating power chucks Suitable for Gildemeister GDM 42 Through-hole cylinder RÖHM SZS 45/92 559 Ident no.: 414096 Serial no.: 7069 Nedoy E T A Aspfx Adtecr Operating pressure: max. 40 bar Speed: max. 7000 rpm Piston diameter: 125 mm Piston rod diameter: 62/53 mm Piston stroke: 25 mm Inner diameter of cylinder tube: 45 mm Hydraulic power chuck cylinder for opening and closing automatic power chucks. For hydraulic operation of power chucks or collet chucks. Through-hole cylinder for hydraulic actuation of power or collet chucks with a through-bore.

Condition: new, functionality: fully functional, machine/vehicle number: 6AV6645-0AB01-0AX0, Siemens SIMATIC Mobile Panel 177 DP – NEW (NOS) + Accessories – 6AV6645-0AB01-0AX0 For sale is a Siemens SIMATIC Mobile Panel 177 DP in new, unused condition (NOS – New Old Stock). Details: Manufacturer: Siemens Model: SIMATIC Mobile Panel 177 DP Order number: 6AV6645-0AB01-0AX0 Condition: New, unused from stock Origin: Industrial inventory / warehouse clearance Scope of delivery: - Mobile Panel 177 DP (new) - Original packaging - Service Package (6AV6574-1AA04-4AA0) - Protective films / membrane set (10 pcs, 6AV6574-1AD04-4AA0) - Documentation + Siemens DVD Special features: - Model discontinued → ideal as spare part - Perfect for maintenance / retrofit / machine service - Complete package with valuable accessories FURTHER COMPONENTS (OPERATOR PANELS, PLCs, etc.) AVAILABLE! Nodsy E N Nrjpfx Adtjcr

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Esterer full-frame saw, model HDS 600, year 1990. Passage width 735 mm, stroke 600 mm. Includes switch cabinets, operator control panels, and drive motor. The machine fits on the foundation of the HDS 700. Can be inspected at Scheibner GmbH, 36110 Schlitz. Ncsdpformmqzsx Adter

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, cutting length (max.): 3,600 mm, cutting width (max.): 400 mm, year of last overhaul: 2024, Woodmizer SLP line and extraction system with log turner infeed fully operational video shows complete line with crosscut. £80,000 plus VAT cost over £250,000 just for the sawline. Contact me for any futher information. Nsdpoyub Ahsfx Adtjcr

Condition: used, No. 3264 Complete sawmill Möhringer / Paul Used, still connected to power until 30.06.26 Consisting of: - Log crosscut table with driven tapered rollers Length measurement Hecht with remote-controlled photoelectric sensors - 1 cross conveyor to the frame saw, 7000 x 5500 mm LW Cam chains in mint condition - 1 cross conveyor, 3800 x 4000 mm LW - 1 roller conveyor in front of the frame saw, length 12400 mm, roller width 1400 mm With hydraulic lowering and lifting for sawn timber, cross-discharge with 2 flap gates - Quick-clamping frame carriage EWD with auxiliary carriage - 1 auxiliary conveyor for log feeding in front of the frame - Root reducer Möhringer - Frame saw Möhringer B 75-55 Multi-BV, year of construction 1994 Passage 700 mm, stroke 550 mm, saw blades hydraulically adjustable, conveyor belt, log loading device with adjustable laser, round timber measurement Hecht, clamps Jansen, hooks, 60 saw blades, adjustment gauge Ncsdpfxsyzr Tfe Adtjr - Powered splitting wedge with chain bed Möhringer 230-292, year of construction 1994 With pre-cutting, photoelectric sensors, and laser for adjustment - 1 roller conveyor 4000 x 1400 mm LW, with grooved rollers, cross-feed with pneumatic cylinders - 1 S-conveyor with storage 3500 x 4000 mm LW, flights Albert made of square tube - 1 S-conveyor 3000 x 5500 mm LW, motor with adjustable slip clutch, function monitoring, drive elements made of angle iron - 1 under-table cross-cut saw Paul 15 AO, year of construction 1992 - 1 double edger Paul KME 2 / 750 R, year of construction 1988 With splinter separator, right-hand side unit electrically adjustable, through-feed cross-cut unit, length sorting system, preselection programs Österle - 1 conveyor belt 7400 x 400 mm LW - 1 conveyor belt 4000 x 400 mm LW - 1 conveyor belt 3000 x 500 mm LW - 1 trough conveyor approx. 6500 x 500 mm LW, ascending, for sawdust - 1 trough conveyor HOLTEC approx. 6500 x 500 mm LW, ascending, for wood chips - 1 trough conveyor HOLTEC, horizontal, with left and right rotation as a distributor over the boxes - Drum chipper HAAS, feed width 600 mm, feed height 150 mm, with vibrating chute - Frame saw sharpening machine OPL - Saw blade tooth setting machine VOLLMER GSA, year of construction 1996 - Frame saw sharpening machine VOLLMER (needs minor repairs, push cylinder bent) Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: new, pressure 2,5 kN stroke 45 mm throat 90 mm Working height from to 80 - 220 mm table surface area 120 x 60 mm weight of the machine ca. 22 Kg dimensions 160 x 230 x 390 mm Hand presses with rack HZ 250 The power is transmitted via a rack and pinion construction. she finds their use where during the working process a constant pressure is needed. Precisely manufactured, spindle hardened and ground, unlimited service life Ncjdpjfv Av Iofx Adtjr Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.

Condition: new, Technical specifications: Length: 6 m Njdpfx Aewavqlsdtscr Length of cut log: 1000 – 4200 mm Main motor: 7.5 kW Diameter of processed log: 1000 mm 600 mm band saw guide wheels Frame made of 160 mm C-profile Band saw length: 4800 mm Band saw width: 40-50 mm Electric up and down drive Feed via a gear motor, continuously controlled by an inverter Support arms x 5 Saw hoist: Hydraulic ADDITIONAL EQUIPMENT Hydraulics: Log loading x 1 Drag arm team Log leveling system x 1 Log press x 1 Chain turner x 1 Hydraulic power unit: 4 kW Optional equipment: Board drop system Microprocessor cutting thickness controller ISP-10 Bark cutter/debarker Bed extension Motor: 11 kW 15 kW / 18.5 kW Electric roller Additional manual pressure Driver's seat Operator platform Desktop-stationary Additional hydraulic components / Log press / Chain turner / Powered leveling / Leveling / Loading Double-sided head lifting chains 2x16B Hydraulic accumulator Water solenoid valve Extendable support arms Loading ramp Head drive from two sides

Condition: used, Year of construction: 1986, functionality: fully functional, We are offering this used Brenta Vertical Band Saw with automatic turning carriage. Year of manufacture: 1986 Vertical saw: Type Tuonyelec Machine no.: 407482 S230 N8586 Wheels: 125 cm Saw carriage: Type Progress 750 Machine no.: 409621 S268 N1143886 Maximum cutting length: 12 meters In the various photos, you can see: - overall view of the saw - saw machine nameplate - saw with extraction pit - automatic line behind the saw - pit under the lower wheel - infeed line from outside - infeed line as seen from inside - outfeed line inside - extra hoisting bracket to resaw pieces. This bracket can return the log onto the carriage with a chain - collection bin behind the outfeed line - collection bin seen from the other side. With red button operable both here and from the machine room - overview of the outfeed line - machine plate of the saw carriage Nedpfxjyxhq Uj Adtocr - saw carriage in the outer position, where the log can be loaded - control room behind the saw - control room interior. Electronic measurement setting and control of all infeed and outfeed lines - wall-mounted electronics across from saw. Control current with relays, which can also be operated manually - Atlas Copco GX 11 FF compressor - Compressor nameplate, year of manufacture 2005 - Grass Air DW 31 air dryer - Stellite adjustment blocks for the guides where the saw blades run through Technical information: - The machine must be supplied with air, hydraulics, and electricity (including control current) - The wheels (upper and lower) were ground approximately three years ago and can last for many more years. - Infeed conveyor control cabinet was renewed in 2025 - At the end of the infeed line, there is a crosscut saw which can trim capping, planks, or beams. This can be set electronically for thickness adjustment. This Brenta vertical band saw with automatic turning carriage is an excellent combination. The listed price is based on the EXW Incoterm, with dismantling by the buyer. If you have any questions or require further information, please feel free to contact us or give us a call.

Condition: new, Year of construction: 2026, The machine is designed to cut both soft and hard wood or wood blocks in lengths compatible with the design of the machine. Dry or fresh (raw) wood can also be cut. This model is equipped with a powerful petrol engine. The absence of a power connection allows greater mobility and independence. Maximum cutting length depends on the number of extensions used (optional equipment). In the basic version, it is 2.72 m. Gasoline engine (LIFAN, manual + key start) 9HP Capacity 301cc The maximum dimensions of the workpiece 660x178x2794 mm The dimensions of the cutting band are 3670x34x0.9 mm Ncjdpfxsgykduj Adtjr Belt speed 17 m / min Pitch between the teeth 22mm Wheel diameter 475mm Dimensions 4064x1778x1800 mm Track dimensions 4042x900 mm Transport dimensions P1:1800 * 550 * 810 mm,P2: 2000 * 140 * 95 mm Weight 312/344 kg Additional 2 Meter section costs 350 euro without VAT

Condition: new, Year of construction: 2026, 7.5 kW electric motor 400V capacity, 3 phases The maximum dimensions of the workpiece 790 x 178 x 2794 mm Cd3zuudzwy Cutting band dimensions 3960 x 34 x 0.9 mm Belt speed 17 m / s Pitch between the teeth 22 mm Wheel diameter 480 mm Dimensions 4064 x 1778 x 1800 mm Track dimensions 4000 x 1030 mm Nsdpfx Adolk Dxhstecr Transport dimensions 2150 x 610 x 810 mm Weight 352/380 kg Additional 2 Meter section costs 350 euro without VAT electromotive height adjustment

Condition: new, Year of construction: 2026, 5.5 kW electric motor 400V capacity, 3 phases The maximum dimensions of the workpiece 660x178x2794 mm The dimensions of the cutting band are 3690x34x0.9 mm Belt speed 17 m / s Pitch between the teeth 22 mm Wheel diameter 480 mm Dimensions 4064x1778x1800 mm Track dimensions 4000x900 mm Transport dimensions 2080x610x810 mm Weight 352/380 kg Ncedpfx Aeid I Dfodtor Additional 2 Meter section costs 350 euro without VAT

Condition: new, Year of construction: 2026, 7.5 kW electric motor 400V capacity, 3 phases The maximum dimensions of the workpiece 790 x 178 x 2794 mm Cutting band dimensions 3960 x 34 x 0.9 mm Belt speed 17 m / s Pitch between the teeth 22 mm Wheel diameter 480 mm Dimensions 4064 x 1778 x 1800 mm Track dimensions 4000 x 1030 mm Transport dimensions 2150 x 610 x 810 mm Weight 352/380 kg Ncsdpjid I A Eofx Adtor Additional 2 Meter section costs 350 euro without VAT

Condition: new, Year of construction: 2026, The machine is designed to cut both soft and hard wood or wood blocks in lengths compatible with the design of the machine. Dry or fresh (raw) wood can also be cut. This model is equipped with a powerful petrol engine. The absence of a power connection allows greater mobility and independence. Maximum cutting length depends on the number of extensions used (optional equipment). In the basic version, it is 2.72 m. 15HP gasoline engine (LIFAN, manual start + key) Capacity 420cc The maximum dimensions of the workpiece 790x178x2794 mm The dimensions of the cutting band are 3670x34x0.9 mm Nedpfx Adogykfvjtecr Belt speed 17 m / min Pitch between the teeth 22mm Wheel diameter 475mm Dimensions 4064x1778x1800 mm Track dimensions 4042x900 mm Transport dimensions P1: 1800 * 550 * 810 mm P2: 2000 * 140 * 95 mm Weight 312/344 kg Additional 2 Meter section costs 350 euro without VAT

Condition: new, Year of construction: 2026, 15HP gasoline engine (LIFAN, manual start) Capacity 420cc The maximum dimensions of the workpiece 790x178x2794 mm The dimensions of the cutting band are 3670x34x0.9 mm Ncedpfxslk Dyis Adtsr Belt speed 17 m / min Pitch between the teeth 22mm Wheel diameter 475mm Dimensions 4064x1778x1800 mm Track dimensions 4042x900 mm Bvxbjjoxyr Transport dimensions P1: 1800 * 550 * 810 mm P2: 2000 * 140 * 95 mm Weight 312/344 kg Additional 2 Meter section costs 350 euro without VAT Electromotive height adjustment

Condition: new, Year of construction: 2026, 27 HP petrol engine (LONCIN, auto start) Capacity 764 cc The maximum dimensions of the workpiece 910 x 4800 mm The dimensions of the cutting tape are 4576 x 40 x 0.9 mm Belt speed 17 m / min Tooth pitch 22 mm Wheel diameter 508 mm Manual feed Dimensions 4064 x 1778 x 1800 mm Extension 6000 x 1010 mm Transport dimensions 2080 x 750 x 830 mm Ncsdpehg Ahnjfx Adtsr Weight 722/782 kg Option transporting wheels

Condition: used, Year of construction: 2005, functionality: fully functional, cutting length (max.): 6,500 mm, input voltage: 400 V, - Year of manufacture: 2005 Ncodpfx Ajyrdg Dsdter - Electrical diagram - Electric motor: 15 kW - Log cutting length: up to 6.5 meters - Control: stationary control panel - Additional equipment: - Hydraulic loading - Hydraulic hold-down - Hydraulic log turner - Roller adjustment - Debarker (for removing bark prior to cutting) - Dual-function hold-down - Side stops - Leveling rollers Machine dimensions: - length: 750 cm - width: 220 cm - height: 240 cm - weight ~1700 kg

Condition: good (used), for sheet thickness up to: 8 mm Nedpstx Uqaofx Adtjcr flat iron: 80 x 12 mm square iron: 20 mm round iron: 18 mm weight approx.: 88 kg space required: 620 x 250 x 380/880 mm high (with/without base frame)

Condition: excellent (used), For sale: Professional fire-fighting pump METZ TS 8/8 manufactured by METZ Feuerwehrgeräte GmbH Karlsruhe. The equipment is in very good visual and technical condition and comes from a fire brigade unit. The pump is powered by a Volkswagen type 122 engine with 25 kW output, renowned for its durability and ease of maintenance. Njdsyt H R Uepfx Adtscr A significant advantage is its low operating hours—approximately 66 hours, which is exceptionally low for equipment of this type. Technical specifications • Manufacturer: METZ Feuerwehrgeräte GmbH • Model: TS 8/8 • Standard: DIN 14410 • Year of manufacture: 1989 • Engine: Volkswagen type 122 • Engine power: 25 kW • Displacement: 1192 cm³ • Pump capacity: 800 l/min at 8 bar • Operating weight: approx. 190 kg • Hour meter: approx. 66 hours Equipment • Pressure and vacuum gauge • Hour meter • Work lights • Firefighting quick couplings • Transport frame • Choke and throttle control Application • Volunteer and professional fire brigades • Water transfer from ponds, rivers, and wells • Agricultural operations • Fire-protection systems • Dewatering and water management duties Robust German engineering—very durable and easy to service.

Condition: excellent (used), Year of construction: 2021, operating hours: 370 h, functionality: fully functional, For sale is a complete sawmill line from Woodmizer, consisting of: LT70 Remote, EG800, HR700, three-way table, 6 cross conveyors, log infeed, and much more. The sawmill line is fully operational. Customer service has been newly performed. The line is still in operation and can be inspected at any time. The price also includes approximately 100 saw bands for LT70/HR700 and 11 saw blades for EG800. Ncsdpfx Adsyz Ia Ijtjr Currently, the HR700 is not in use and is in storage. The HR700 is fully operational with only 30 operating hours. An alternative setup of the line with HR700 can be seen in the last picture. If you have any questions, I am happy to assist.

Condition: used, Year of construction: 1993, functionality: fully functional, We are selling our packaging timber sawmill: - Esterer frame saw H30 - EWD step feeder - with stacking system - Costa Multiprisma (35), logs up to 6 meters - Costa double-shaft saw type Leopard - Zeno drum chipper Ncedpewbpi Dofx Adtsr - with numerous auxiliary machines The machines can be inspected on site by appointment if interested.

Condition: good (used), machine/vehicle number: 8607719 / 8412427, Equipment: rotational speed infinitely variable, 2x OZAKI lathes - 1x in working order; OSL-III 8607719 Ncsdpfexg R Nyox Adtjr - 1x defective (for spare parts); OSL-III No. 8412427

Condition: excellent (used), Year of construction: 2010, The following components of a Linck VM50 saw line are available: Condition of the machines is very good! Infeed device ZV21, model EV 50 (in stock) Profiling chipper ZD31, model VM50, 2 × 200 kW (in stock) Nedpfx Adsy Hbxhstocr Outfeed device AV31, model VZM (in stock) Centering device VZ21, model VZV (in stock) Log rotator DV21, model DV70-2 (in stock) Additional components: Infeed and centering device EVP – available from September 2026 Profiling chipper VM50, 2 × 200 kW – available from September 2026 Profiling aggregate VMP450 F61, 4 × 110 kW – available from September 2026

Condition: excellent (used), Year of construction: 1994, Low-speed machine with hydraulic moving floor. Rotor width: 840 mm. Motor: 18.5 kW. Hopper with lid included. Ready for operation. Only 3400 operating hours. Nedpfx Asx Ilp Hodtocr