Used Miscellaneous for sale (218)

Condition: used, Year of construction: 2016, Format: 400 x 770 mm Power: 230V / 400V Net Weight: 350 Kg Measurements: (LxWxH):105 x 135 x 130cm Tjdpfeyxqwkox Abuod Equipment: Mechanical speed: 250 pieces/hour Blank Sheet Width: Minimum 250 mm to Maximum 770 mm Blank Sheet Height: Minimum 150 mm to Maximum 400 mm Allowable Board Thickness: From 1.5 mm up to 3.5 mm thick rigid greyboard Cutting Width (Horizontal): Adjustable from a narrow minimum of 6 mm (perfect for thin hardcover book spines) up to a maximum width of 700 mm. Cutting Height (Vertical): Adjustable from 127 mm up to 355 mm. Automatic 3-Panel Segmenting Automated Material Lift & Feed Integrated Sheet Transport Conveyor Heavy-Duty Rotary Shear Knife Block Digital Operator Display Panel Maximum Sheet Feed Capacity: Accommodates a raw board thickness range commonly spanning 1.0 mm up to 4.0 mm

Condition: used, Format: 300 mm Tjdpfx Aj Adtmgebued

Condition: used, Format: 530 mm Todpfx Abozcd Nmoued

Condition: used, Year of construction: 1981, Format: 680 mm Equipment: with 1x perforating tools Tedpoy Dufcofx Abued with 1x creasing tools perforating machine with electric motor

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws :Brake/drive :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. Tsdpfxjz Enbbj Abusd :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side

Condition: used, Format: 762 x 530 mm Equipment: Tsdpfex N Tz Tex Abujd details on Request

Condition: used, The equipment in question is a vertical stack delivery system with an integrated pressing station, manufactured by Lega. This specific model is identified as type 30/55 and bears the serial number 32323. Currently, the equipment is in stock and located in Germany. It is reported to be in good condition, making it ready for immediate use or integration into existing operations. Format: Tsdpjwzxzcefx Abued Equipment: Vertical stack delivery with pressing station Good condition

Condition: used, Year of construction: 2010, The Mailmaster 565HS, manufactured by KAS in 2010, is currently in stock and located in Germany. This machine is in good condition with no damages and is configured with FSFi for faster intake, featuring 6 attachment stations. It can handle envelope formats from DL to C5 and operates at a speed of up to 7,000 cycles per hour. The delivery terms are FCA. Todjvfxqajpfx Abujd Equipment: Speed: bis zu 7.000 Takte/h Envelope formats: DL - C5 Configuration: FSFi (fast feed), 6 insert stations Good condition without any damage

Condition: used, Year of construction: 2008, Format: 300 x 450 mm Equipment: max. screen frame size 500 x 750 mm table height 945 + 30 mm screen lift height 300 mm max. printing speed 100 - 500 mm/sec. max. cycling speed 800 p/h mains supply 220, 50/60 V / Hz working pressure 5 - 7 bar dimensions (LxWxH) 920 x 750 x 1710 mm Tedpfx Aboyzrupeusd weight approx. 245 kg

Condition: used, Year of construction: 1998, Format: 650 x 320 mm Equipment: 1 clamp Milling and Notching Station Spine Gluing Todpfxszkapdo Abujd Side Gluing Hotmelt Automatic Cover Feeder Nipping Station Up to 600 cycles/hour Voltage: 3-phase, 400 V or 230 V 3.3 kW

Condition: used, Year of construction: 2007, Format: 1360 x 1200 mm Equipment: Fully automated palletizing of loose stacks and solid containers at a speed of up to 1,800 stacks/hr Automatic Palletizing product infeed via accumulating conveyor Pallet dimensions: 1360 x 1200 - 1000 x 800 travel stop for dropping of very smooth products pallet removal in moving direction Todpfx Ajyxqvgebusd Pallet sizes 1,360 x 1,200 or 1,000 x 800mm Speed 30 Stacks/min

Condition: used, Format: 390 mm Equipment: Binding station: Manual insertion and pressing device with adjustable stops for precise block alignment. Heating system: Integrated thermal heating element with a fixed operating temperature, calibrated to the melting point of the original Planax Stripes (fabric binding strips). ??? Format flexibility: Infinitely variable binding for everything from very small formats up to a maximum binding length of 390 mm (making it suitable for A4 landscape or A3 portrait orientation). Tjdpfo Adtmysx Abuod ??? Document thickness capacity: Binds documents ranging from just a few sheets up to a maximum thickness of 60 mm.

Condition: used, Year of construction: 1982, Format: 0x0 Equipment: Corner cutter, manual Tjdex Rh Dxopfx Abujd

Condition: used, Year of construction: 1999, Format: 340 mm Equipment: VIVA 340 No. 85, equipped with: 1 paper unwinder (1 m diameter) 1 rotary die-cutting unit with magnetic cylinder, 14 Zoll format length 6 letterpress units with integrated register carriage and magnetic cylinder (14 Zoll format length) Tsdpjzcp D Nofx Abusd 1 Grated exhaust system (600 mm diameter) 1 Winding system (700 mm diameter) 1 Longitudinal cutting/trimming unit 1 UV flexo coating unit with magnetic plate cylinder 7 I.S.T. UV dryers with CMK reflectors and provision for water cooling 1 Rotometrics Hydrajack pressure control system for the main die-cutting unit 1 BST ProMark video web inspection system (model Euroscope) 1 Preparations for COVID-19 treatment 1 Plate punching machine 1 Plate bending machine

Condition: used, Year of construction: 2002, Format: 0x0 Todpfey Dudxex Abusd Equipment: 2 spindles

Condition: used, Year of construction: 2004, Format: 320 ?? 550 mm Equipment: Tjdpfxoyxqxbo Abued Sheet feeder: Two drum feeders with gripper system Belt conveyor channel for product conveying Surface with rice paper structure to protect the product Front stop made of aluminum Side guides with sorting screws for sheet positioning Screw ejector for precise bow positioning Sheet control system: Double sheet inspection using mechanical thickness measurement Misaligned bow detection using photocell Photocell-controlled activation of the second feeder and glue injection timing Glue unit: Hot melt or cold glue application (configurable) Glue injector with digital keyboard setting Delivery: Double roller press station for optimal adhesion Inclined conveyor belt for shingled product stacking at the exit Control system: SPS control unit Touchscreen control panel Safety system with light barriers Technical data: Min. Format 100 ?? 150 mm Max. Format 320 ?? 550 mm Max. sheet thickness 5 mm Maximum mechanical speed 6,000 cycles/hour

Condition: used, Year of construction: 1998, Format: 600 x 750 mm Equipment: Max. stacking height 1200 mm Min. stack height 540 mm Platform width 900 mm Tjdpfey D Tc Tjx Abued Platform depth 625 mm Load capacity 500 KG

Condition: ready for operation (used), IN STOCK - Tjdpsir E Ruefx Abujd 2 x feeders - Model 888

Condition: ready for operation (used), IN STOCK - 2 up kit to suit Muller Martini three knife trimmer 217/DSS/890 Tedoir E R Aspfx Abuod

Condition: ready for operation (used), IN STOCK Tsdpfxoir E Rij Abuod 2 x 1555 feeders

Condition: ready for operation (used), IN STOCK - 4/5th knife attachment for a Muller Martini DSS/890 trimer Tsdpfxjir E Rxj Abuod

Condition: used, The Josef Foellmer Iram 16, serial number 2037, is a robust four-head paper drilling machine designed for precision and efficiency in professional finishing environments. Currently located in a printshop in Germany, the unit is in good condition without any damage, reflecting its durability and careful maintenance. With its four drilling heads, the Iram 16 offers flexibility for a variety of drilling patterns and applications, making it a reliable solution for bindery and finishing operations that require accuracy, consistency, and productivity. Equipment: Good condition without any damage Tedpfxoxb Dpis Abusd 4 head paper drills

Condition: used, The Robatech Roba 40 nozzle glue system is a specialized adhesive application system designed for precise and efficient gluing operations. Manufactured by Robatech, this model is located in Germany, with pricing available upon request. The system is equipped with a 40 nozzle configuration, ensuring accurate and consistent adhesive application for various industrial and manufacturing needs. Format: Equipment: Tjdpfxovphzis Abujd 40 nozzles for consistent adhesive application

Condition: used, This Poege Letterpress is a historic museum piece, manufactured in 1900. Currently in storage and located in Germany, this item is a significant artifact from the early days of printing technology. This piece is ideal for collectors, museums, or educational institutions focused on preserving and showcasing the evolution of printing machinery. Tedpfxjvfx Tnj Abued Format: Equipment: Letterpress, perfect for Collectors or Museum

Condition: used, The Nagel Multinak S is a stitching machine designed for efficient and precise stitching tasks. Currently in storage and located in Germany, this model is available for transport under FCA delivery terms. With its double stitching heads and magazine stitcher, it offers high productivity and versatility in handling various stitching requirements. Format: Tedpfx Aovfx Sqjbujd Equipment: double stitching heads magazine binder