Used Miter Fence for sale (1,630)

Condition: good (used), Year of construction: 1988, Double Mitre Saw Düspohl DGK 400 B Stock number: 001071 Double Mitre Saw Düspohl Type: DGV 400 B Year of manufacture: 1988 Swivelling saw blades Max. cutting length: 2500 mm Approx. cutting height: 70 mm Max. saw blade diameter: approx. 300 mm Was used for door frames Motor power: 4 kW Fsdpfx Ajyv R Nzopwsgb Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Stop, depth stop, length stop for miter saw, pull saw... Fgedpfodapm Rjx Apwsb -Receiver: Bosch profile -Length Unit of measurement: 2000 mm -Price: complete -Dimensions: 2215/100/H1000 mm -Weight: 10 kg

Condition: good (used), Year of construction: 2020, functionality: fully functional, 5.5 kW, Fedjykar Hjpfx Apwjgb -45/+45° tiltable, electric height and swivel adjustment Left/right, 6 speeds Aigner fence 2 x 500 mm, digital readout on the spindle fence, table 2500 mm x 780 mm, mechanically programmable spindle fence with two displays, system for quick removal from the worktable New price: €18,700 Available around September 2026 Shipping available at extra cost!

Condition: good (used), Year of construction: 2011, machine/vehicle number: 4315002, Offer 26087 Technical data: - Saw band dimensions: 4150 x 27 x 0.9 mm - Cutting speed: continuously adjustable, 15 - 105 m/min - Cutting feed rate: continuously adjustable, 0.2 - 2.0 m/min - Cutting capacity: - at 90° round: 320 mm - square/flat: 400 x 280 mm - at 45° round: 200 mm - at 30° right round: 170 mm - Mitre adjustment with digital angle display - Total drive: 400 V / 3.0 kW - Minimum quantity coolant spraying device, pneumatically assisted Fedpfx Apjy Aufgowegb - Hydraulic saw band tensioning & motorized saw band brush - 2 original roller conveyors, each 2000 mm - Required space approx.: W 4200 x H 1650 x D 2450 mm - Weight approx.: 1400 kg

Year of construction: 1990, condition: used, machine/vehicle number: 102-014-3150, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 210 x 80 mm Fodpfx Apedbp Eqjwsgb cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 160 x 80 mm cutting speed: 11/22 m/min space needed: 2650 x 1450 x 1980 mm weight: ca. 1100 kg

Year of construction: 1971, condition: used, machine/vehicle number: 23964, disk of circular saw-Ø: 370 mm cutting area at 90°: 115 mm cutting area at 45°: 115 mm engine: 380 V, 4/5 kW space needed: 1000 x 1200/2200 x 1500 mm weight: ca. 900 kg Fgjdecu Dvuepfx Apweb

Condition: good (used), Year of construction: 2003, Head machining of posts, boards, laths for tear-free machining. with magazine which works itself off automatically 2 milling spindles move independently from the outside to the middle so that there are no tears. Fgjdpfx Apogmt Erewsb

Condition: new, Year of construction: 2026, functionality: fully functional, 7.5 HP 200 mm cutting height 1Hydraulic feed brake Tiltable to the left up to 60°, to the right up to 30°, tiltable from the front using a hand crank cutting height 140 mm at 45° inclination Tiltable to the left up to 60° to the right up to 45 Cutting length at 90° - 420 mm Cutting length at 45° - 295 mm Fodpfx Apsb Dkyvowjgb Length of the unloading roller conveyor with scale and stop slide left - 6000 mm Length of infeed roller conveyor 2000 mm, attachment side right Machine completely mobile, total length 9000 m inclinable from the front with hand crank, machine is also available with 215 mm or 240 mm cutting height and other options,

Year of construction: 1991, condition: like new (used), Machine is fully functional. Now is in stock. Fgjdpfshvrz Tox Apwsb 6.000 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, cutting length (max.): 6,000 mm, total length: 7,500 mm, total width: 1,500 mm, total height: 2,000 mm, Technical data – Elumatec DG 244/2, year of manufacture 2008 Control unit model: E555 – touchscreen Technical advantages of the machine: - Saw blade diameter: 550 mm - Blade speed: 2800 rpm - Compressed air supply: 7 bar - Weight: 2300 kg The machine is fully operational and can be tested on site. Fjdpfx Aoyv E N Aspwegb Price includes loading. We can also assist with delivery to the specified address. The machine is located in Poland – 33350. Inspection possible by prior arrangement. Our company is situated 120 km from Kraków airport (KRK). Transport possible. Export price.

Condition: used, Year of construction: 1980, Graule ZS 85 N Cross-cut and mitre circular saw, tiltable ~ Year of manufacture: 1980 Fsdpfx Asyv Aa Sjpwegb 400 Volt three-phase, 2 kW Saw blade diameter: 350 mm, bore: 30 mm Cutting height: 85 mm Cutting length: 380 mm at 90° Cutting length: 270 mm at 45° Extraction port D = 100 mm

Condition: reconditioned (used), functionality: fully functional, Power connection: 230V, 1.5kW Current consumption in operation: 5.5A Cutting height approx. 80 mm Cutting length 150 mm Dimensions (W x H x D): 500 x 570 x 750 mm Weight approx. 50 kg Handwheel height adjustment Swivels right/left 45° Tiltable 45° Fedpfoyypfpex Apwsgb

Condition: new, Equipment: CE marking, saw blade guard, Mitre saw with a saw blade diameter from 400mm to 800mm - Manual mitre adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (height and tilt angle of the clamping cylinders are infinitely adjustable) - Two-hand safety control Version as an automatic saw available on request. Optional available: - Automatic mitre adjustment - Hydraulic saw feed - Hydraulic clamping device - Roller conveyor with length stop or positioning system - Version as automatic saw - Preloading magazine - Horizontal clamping device - Extraction system Fedpfxsyxlqre Apwsgb - Additional accessories on request We are happy to prepare a quotation tailored to your requirements. The machine can be inspected and tested in 56812.

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 20221346, input voltage: 400 V, Quiet running Heavy cast iron version High cutting accuracy due to vibration-free running Fgjdpfx Apoyx S Dfswob Ball-bearing saw blade guide EMV class C2 Twin-channel safety chain with quick stop in case of emergencyStop Chips brush Microswitch for automatic limit switch Push button - Manual saw band run - the hand lever switches the saw band run on and off Serially with high-quality bi-metal saw band Material stop with scaling Quick clamping vice adjustable via hand wheel. Clamping the workpiece with a handy quick-action clamping lever Stable machine base End stops adjustable to the degree Steplessly adjustable saw blade speed 15 - 90 m/min Double miter Turntable: Any angle between 45° and -60° can be sawed as the cutting gap swivels with the saw arm

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: 90F, functionality: fully functional, Double miter saw with circular blades of 250–275 mm diameter and cuts at 45°+45° with fixed fence. The operator performs the 45° horizontal cut by pulling one blade at a time. Fgodpfxjy Iag Ts Apwjb Wide cutting capacity (120 mm width x 80 mm height). Precise and high-quality cuts in soft and hard woods – PS and all MDF materials. Low noise and high safety standards. Particularly suitable for all picture framers with small production runs.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, power: 2 kW (2.72 HP), saw blade diameter: 350 mm, Radial arm saw Graule This machine can cut 90° only !!! Length of cut : 430 mm Depth of cut : 135 mm Fgedpfx Ajy Dgdkopwob Sawblade-Ø : 350 mm Suction plant-Ø : 100 mm

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner Fjdpfx Ajgylq Ispwogb -Double miter saw: Saw unit right and left -Saw unit: swivels 45° -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: Ø 420 x 30 mm -Price/Fee: complete -Overall dimensions: 1200/800/H690 mm -Total weight: 234 kg

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 258882, cutting length (max.): 6,000 mm, saw blade diameter: 500 mm, total length: 7,550 mm, total width: 1,700 mm, total height: 1,740 mm, type of input current: AC, input voltage: 400 V, overall weight: 1,450 kg, the machine is used and it's in good condition Fsdpfsyt Sf Rjx Apwjgb

Condition: excellent (used), Type: ZF 2 Manufacturer: WAFIOS Year of manufacture: - Serial No.: 2.1062.013 Capacity: 45 weft wires/min = 3.712 m Linear wire diameter: Core: 1.6 mm / Outer diameter: 2.6 mm Weft wire diameter: Core: 2.6 mm / Outer diameter: 3.6 mm Tensile strength: 600 – 700 N/mm² Number of twists of the 3 line wires: Crimp pitch: 19.14 mm Linear wire spacing: 153 mm Weft wire spacing: 82.5 mm Max. braid height: 1,250 mm Condition of the machine(s): Used, dismantled Fedowr Akcspfx Apwogb

Condition: excellent (used), Year of construction: 1978, Machinetype: chain link fence machine Double spiral Manufacturer : WAFIOS Type: VDF80 Fgedpovdtaaefx Apweb Constr. year: 1978 wire diameter: 1,6-3,8 mm mesh width: 20-80 mm working width: 2000 mm capacity: 160 m²/h

Condition: excellent (used), Year of construction: 1980, WAFIOS DF5 Wire range- 1,5- 5,0 mm Mesh with - 20 - 100 mm Fgjdpfjv Uw Ddox Apwob Working with - max.2000mm Capacity - 170 m2 / hour Tooling for the mesh width - 60 mm

Condition: excellent (used), functionality: fully functional, Double mitre saw ALFAMACCHINE T350 Double saw for 45-degree angle cuts Blade diameter: 350 mm Blade bore diameter: 30 mm Blade speed: 3,000 rpm Fedpfsyzrgxox Apwjgb Motors: 2×1.5 kW Air requirement: 5–7 bar Cutting width: 15–80 mm Cutting height: 10–80 mm

Year of construction: 2026, condition: new, TNDG manual positioner with handwheel operation and pneumatic clamping. Measurement display via linear encoder and digital readout. Available in lengths of 3, 4, 6, and 8 meters Working height: 800–1050 mm Permissible load: 70 kg per meter Roller dimensions: 40 x 300 mm Fsdpfx Apopa Nzyewogb PACKING AND DIMENSIONS: TNDG-3: 3530 x 670 x 430 mm (95 kg) TNDG-4: 4500 x 670 x 430 mm (110 kg) TNDG-6: 6500 x 670 x 430 mm (130 kg) We look forward to your inquiry! Plantec Maschinen GmbH

Condition: good (used), Model: Univer 330IP Double mitre saw / compound mitre saw Year of manufacture: 2001 Motor power: 4.5 kW Maximum cutting length: 3300 mm Minimum cutting length: 240 mm Saw blade diameter: 330 mm Dimensions (L × W × H): approx. 3750 × 940 × 1450 mm Fgjdpfx Apsymg D Uowob Weight: 350 kg Note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contract, and we recommend checking all relevant details. Financial information VAT/margin: VAT: The price shown is excluding VAT (VAT deductible for businesses).

Condition: new, Semi-automatic bandsaw with double-sided mitre cutting R/L 60° including hydraulic blade tension indicator Option for retrofitting minimum quantity lubrication Cutting capacity 90° round 280 mm / flat 410 x 280 mm / square 280 mm 45° right round 280 mm / flat 310 x 150 mm / square 270 mm 45° left round 280 mm / flat 330 x 100 mm / square 280 mm 60° right round 210 mm / flat 205 x 100 mm / square 190 mm 60° left round 220 mm / flat 225 x 100 mm / square 210 mm Material support height 756 mm Saw blade dimensions 3800x0.9x27 mm Cutting speed 20-120 m/min Fsdpfx Apjd Dpzgowegb Drive power 2.2 kW Dimensions LxWxH 2130 x 1070 x 1440 mm Weight 530 kg Price on request