Used Mitre Saw for sale (8,346)

Condition: used, Year of construction: 2007, functionality: fully functional, Used machine Year of manufacture: 2007 Product information: Max. cutting length: 6,000 mm Max. saw blade diameter: 380 mm Gbsdpfoyu Hupjx Abmel The saw heads can be continuously swiveled from 0° to 45° to the left and right, allowing for both external and internal dimension cuts. Indexing points at 15°, 30°, and 45° Hydropneumatic saw feed for precise cutting, infinitely adjustable with rapid traverse Vertical and horizontal pneumatic material clamping devices ensure optimal profile fixation E 111 Electronics: Manual cutting length adjustment with digital display E 111 Switching between absolute measurement and chain measurement Retention of the displayed actual value in the event of power failure Technical Data: Minimum cutting length: 520 mm Electrical connection: 400 V, 3~, 50 Hz Power output per motor: 3 kW Compressed air connection: 7 bar The following accessories are also included: 1x Fixed workpiece support

Condition: good (used), Year of construction: 2009, functionality: fully functional, saw blade diameter: 450 mm, total length: 1,300 mm, total width: 1,300 mm, total height: 1,500 mm, cutting range round steel at 90°: 100 mm, overall weight: 500 kg, length stop: 2,000 mm, power: 4 kW (5.44 HP), Circular saw for Aluminium, capacity Ø 3 - 100 mm, blade Ø 450 mm, mitre LH + RH 22° - 90° - 22°, motor 4 kw, speed 2800 rpm; options: vertikal clamping, air/oil mist lubrication, digitale mitre device, pression regulation device, rollers left side 3 meter with vertical rollers, measuring rollers right side brand AMAT 2 meter with back pulling device; dimension 130 x 130 x 150 cm, weight ca. 500 kgs Gsdsyxfxiopfx Abmjbl

Condition: good (used), Year of construction: 2018, machine/vehicle number: 68892, Offer 26014 Hydraulic, Two-Column Guided Mitre Band Saw Automatic Machine Technical Data: - Automatic work cycle for cutting operation, hydraulic lifting / lowering of the saw frame, manual mitre adjustment with hydraulic clamping - Automatic material feed system, motorized mitre adjustment - Saw band dimensions: 4400 x 34 x 1.1 mm - Cutting speed, infinitely variable: 15 - 150 m/min Godpfx Abeytn Dismjbl - Cutting pressure regulation, infinitely variable: 10 - 15 bar - Lowering speed: 0 - 300 mm/min - Cutting range: - 30° to 90° - at 90° round: 335 mm - square-flat: 500 x 335 mm - at 45° round: 330 mm - square-upright: 320 x 335 mm - at 30° square-upright: 170 x 335 mm - Material feed automaton - Discharge roller conveyor: 4000 mm - Infeed roller conveyor: 4000 mm - Drive: 400 V / 6.5 kW - Required space (approx.): W 2300 x H 1750 x D 2200 mm - Weight (approx.): 1800 kg

Condition: used, Year of construction: 1991, saw blade diameter 275 mm cutting diameter 90 mm cutting speed 80 m/min Godsx Avtvspfx Abmobl EISELE Miter Circular Saw VMS 120 Saw blade diameter: 275 mm Cutting capacity at 90° (round): 90 mm Cutting capacity at 90° (rectangular): 75 × 75 mm Cutting capacity at 45° miter (rectangular): 75 × 75 mm Saw blade speed: 40 / 80 rpm Drive motor: 380 V, 1 / 1.2 kW Required floor space: 700 × 600 × 1580 mm Weight: approx. 180 kg

Condition: used, Year of construction: 1995, cutting width 375 mm Gsdpfx Abotv Rgrsmsbl Cutting height 150 mm dimensions of saw-blade 500 x 30 mm Motor output 2 x 3 kW Cutting length 5100 mm speeds 2800 U/min air pressure 6 bar weight of the machine ca. 700 kg dimensions of the machine ca. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Stable cast construction of the saw unit * Large cutting range, 2 profiles can be cut at the same time * Easy adjustment of the moving unit with roller guides * Double storage of the swivel device * Safe clamping thanks to the two-pressure system * Double saw feed guide * Hydropneumatic saw feed * External dimension correction scale * Left saw unit fixed * Swivel range 45°-90° * Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 9000x1400x1680 mm Weight 1600 kg Total power requirement 7,5 kw Gbodpfsv A E Ndjx Abmol - Max process length 2.5 m (Can be customzied)- Max process width 200 mm -Min process width 30 mm- Max process thickness 1O0 mm (Can be customzied)- Saw blade 405/120/30/3 , 455/120/30/3 mm- Spindle motor 7.5 KW / 400 V- Machine size 9000 mm x 1400 mm x 1680 mm- Machine weight 1600 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, saw blade diameter: 600 mm, Defect cutting function Power supply: 400 V Saw blade diameter: Ø 600 mm Machine weight: 1,820 kg Year of manufacture: 2006 Model: CT 600 Motor power: 7.5 kW Serial number: 260856 Infeed pusher dimensions: 10,300 × 2,000 × 1,250 mm Outfeed conveyor dimensions: 6,300 × 800 × 1,120 mm Godpfxsx Nnd Ae Abmobl Outfeed table dimensions: 5,000 × 1,250 × 910 mm Rotational speed: approx. 2,600 rpm Table rotation range: max. ±70° Cutting height: approx. 200 mm (at 0°) Maximum cutting width: approx. 410 mm Minimum workpiece dimension: 20 × 10 mm Positioning accuracy: ±0.4 mm Cycle time: approx. 4 seconds per cut Working height: 1,000 mm Dust extraction port: Ø 100 mm Beckhoff control with 12” touchscreen (Windows interface), 3D workpiece visualization, cutting list import via USB / Ethernet.

Condition: good (used), cutting width 300 mm Cutting height 85 mm Motor output 1,5 kW saw-blade dia. 300 mm Gsdjyiu Sfopfx Abmobl connected load frequency 380 V

Condition: used, Year of construction: 1990, cutting diameter 500 mm cutting length 5000 mm saw blade diameter 420 - 500 mm dimensions ca.6400 x 1500 x 1600 mm weight ca. 1600 kg feed stufenlos Motorized length adjustment with digital display Gbsdpfov U Dlusx Abmjl manual and spare part list included

Condition: used, Year of construction: 2004, cutting width max. 700 mm Cutting height max. 120 mm Gsdpfex Eblvex Abmsbl saw-blade dia. max. 700 mm

Condition: used, Year of construction: 2022, Cutting height 260 mm sawing motor 7,5 kW saw-blade dia. 500 mm feed max. 250 m/min Gbodpox Ditfjfx Abmel

Condition: used, cutting width max. ca. 600 mm Cutting height max. ca. 120 mm feed pneumatisch m/min Gjdsxrtzpepfx Abmebl

Condition: used, cutting length ca. 2.200 mm mitre angle 45° - 90° workpiece max. 50 x 70 mm Gsdpfx Abew D Dfxjmjbl

Condition: used, cutting width 380 mm Cutting height 85/40 mm machine weight ab. 50 kg Combined pull-through and table saw Graule AGT. The pull-through saw can be tilted and swiveled. The machine can also be used as a pull-through saw only by removing the table. Gbsdpfx Abowqphlomel

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Equipment and technical data: - Swivels both sides up to 45° - Saw blade tiltable to one side up to 45° for vertical mitre cuts - Motor: 2 kW, 400 volt, 2800 rpm - Saw blade diameter: 300 mm - Extraction connection diameter: 75 mm - Cross cuts: 380 x 85 mm - Mitre cuts, saw blade vertical, 45° swivel to left or right: 265 x 85 mm - Mitre cuts, vertical, saw blade tilted 45° to the left: 380 x 60 mm Gbedoykvw Sepfx Abmol Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1999, power: 3 kW (4.08 HP), input voltage: 400 V, cutting height (max.): 200 mm, saw blade diameter: 520 mm, overall weight: 350 kg, cutting length (max.): 420 mm, mount diameter: 50 mm, saw drive: 3,000 W, No. 04511 Crosscut and mitre saw Graule ZS 200 N Used, year of construction 1999 Saw can be swiveled and tilted 3 kW three-phase brake motor 400 V Saw blade diameter 520 mm Saw blade holder 50 mm Cutting height 200 mm Saw blade tilted to 45°: Cutting height 140 mm Cutting length 420 mm Gjdpfx Ajyh Nfuobmsbl Table dimensions 900 x 700 mm LW Aluminium fence back With machine stand and hand crank at the rear for tilt adjustment Hydraulic feed brake Pneumatic material clamping on both sides from above Saw blade spray device for coolant or lubricant Carbide circular saw blade for aluminium and plastics, diameter 520 mm Roller conveyor type RLK 4000 mm, with fold-away material fence and scale Roller conveyor 4000 mm long after the saw Roller conveyor width 350 mm Transport dimensions machine approx. 1650 x 1200 x 1850 mm LWH, roller conveyors approx. 4500 x 400 x 1950 mm LWH Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Year of construction: 2004, condition: good (used), Crosscut and mitre saw, pull saw, crosscut saw, aluminum circular saw, metal circular saw, metal cutting saw, underfloor circular saw with double mitre, aluminum crosscut saw, underfloor saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw Gbsdpfx Ast Hafksbmel -Manufacturer: Graule Type ZS135 -Engine power: 2 kW -Speed: 2700 rpm -Saw blade: Ø 350 mm, pivoting -Cutting area: 90° flat 430 x 135 mm -Cutting area: 45° flat 300 x 135 mm -Transport dimensions: 1150/910/H1200 mm -Weight: 185 kg with pallet

Year of construction: 2007, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1340020469, Mitre Saw Machine AKS 134/00 1 x Saw Blade Ø550mm 1 x Saw Blade Ø500mm Gbedex A D Ihopfx Abmel Equipped with digital angle setting readout

Condition: used, Technical details: saw blade diameter: 420 mm cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual flushing device hydropneumatic feed Gbedpfeu Nigwox Abmol use of carbide saw blades i.D. *

Condition: new, GRAULE ZS 85 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 85 N cross-cut and mitre saw - inclinable - Material feed shoulder made of laminated wood - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 85 N to ZS 170 Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Godpfju R Sycjx Abmjbl - new exhibition machine -

Condition: new, GRAULE ZS 170 N cross-cut and mitre saw - tiltable - Gsdpfou R Sypsx Abmsbl Includes: - GRAULE ZS 170 N cross-cut and mitre saw - tiltable - - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 135 N and ZS 170 N Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm - new exhibition machine -

Year of construction: 1996, condition: good (used), functionality: fully functional, machine/vehicle number: 26 628, Technical specifications: Cutting length: 5000 mm Saw blade: 420 mm with roller conveyor Saw unit swiveling and tilting Godpfx Aeyill Hsbmobl

Condition: new, Technical Data: Cutting range: Round 0°: 255 mm Square 0°: 200 x 200 mm Flat 0°: 320 x 200 mm Round 45°: 195 mm Square 45°: 195 x 195 mm Flat 45°: 195 mm Round 60°: 125 mm Square 60°: 125 x 125 mm Flat 60°: 130 x 120 mm Round -45°: 200 mm Square -45°: 170 x 170 mm Flat -45°: 200 x 170 mm Cutting speeds: 35 / 70 m/min Saw blade: 2750 x 27 x 0.9 mm Working height approx.: 930 mm Coolant pump: 100 W Saw motor: 1.5 kW Connection: 400 V Dimensions LxWxH approx.: 2000 x 1250 x 1900 mm Weight approx.: 350 kg Features: - Double mitre saw with a pivoting saw bow from left -45° to right +60° - Ideal for cutting pipes, profiles, as well as solid VA, steel, etc. in commercial applications - Generously dimensioned cast saw arm for low-vibration operation - Two saw band speeds for optimum adaptation to the workpiece - Hydraulic downfeed cylinder - Quick-release vice for simple and fast workpiece clamping - Precise, adjustable saw band guides for optimal cutting results - CE/IEC, German documentation and German service Scope of delivery: - Saw blade - Material stop - Pressure gauge (band tension) - Carbide saw blade guides - Vice with quick-release - Integrated coolant system - Hydraulic bow downfeed - Motor protection switch - Automatic shut-off Gbjdpfx Abjd R Sipemsl - Stand/base

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Electronic X-axis control X-axis positioning speed (m/min) 25 Pneumatic head tilting External tilting 45° / 22° Mechanical adjustment of intermediate angles Gjdeyv Ag Sepfx Abmobl Hydropneumatic blade feed Usable cutting length (mm) 5,000 Minimum standard cut with 2 heads at 90° (mm) 310 Blade diameter (mm) 450 Contact probe

Condition: new, saw-blade dia. 210 mm Cutting height 70 x 305 mm Gbedpfxou Imnie Abmjl Cutting height at 45° 35 x 305 mm saw blade turning speeds 4500 U/min Motor output 1,5 kW machine weight ab. 9 kg Dimensions (L/W/H) 340 x 500 x 740 mm Cross-cut saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover folds away automatically. Delivery including: saw blade (installed) 6mm allen key anthers 2x side supports