Used Mitsubishi Mvr 30 for sale (367)

Condition: new, Mitsubishi HA300NCB-S SPECK NO 84017 + Encoder OSA104 SN J4AVP403AW, unused with signs of storage, 100% functional, scope of delivery as per photos Ndjdpeqx Dfdofx Ah Ssc

Condition: new, Mitsubishi HA300NCB-S SPEC NO 54016 + Encoder OSA104 J4AVP9V5602, unused with signs of storage, 100% functional, scope of delivery as per photos Nedsqyrrgepfx Ah Ssdc

Condition: ready for operation (used), Mitsubishi HA23NCB-S servo motor, serial number: 83008 + OSA253S encoder, serial number: J4AVQ448127, used, shows normal signs of wear, 100% functional, scope of supply as shown in the photos. Nsdpfoi D I Nxsx Ah Sodc

Condition: used, power capacity / kW volt / V Nedpeyn Sbzofx Ah Ssdc ampere / A revolutions per minute / U/min For sale is a functional MITSUBISHI HA300C spindle motor AC spindle motor

Condition: used, mileage: 323,000 km, first registration: 07/2015, Fuso 7C18 refrigerated vehicle with Carrier Supra 750 refrigeration unit, Lamberet box body, and LBW tail lift. • EURO 6 emission standard • Cruise control • Leaf/leaf suspension • Automatic transmission • ABS • ASR / switchable • Airbag • Air conditioning • Central locking • Double bench seat for passenger (3-seater) • Electric windows • Fog lights • Headlight range adjustment • Reversing camera • Tire size: 205/75 R17.5 • 7,490 kg gross vehicle weight (GVW) • Unladen weight: 5,200 kg • Payload: 2,300 kg! LAMBERET refrigerated box body: • 12 pallet spaces • Soft wall, 3-part; longitudinally adjustable • Cold curtain • Portal doors at the rear • Side door on the right • Aluminum impact strips on the right and left at the bottom • Tie-down rails, double on the right and left • Floor: Aluminum tread plate • Box body interior dimensions: 5,200 x 2,470 x 2,450 mm • Dhollandia DLHM 10 tail lift, vertical CARRIER Supra 750 refrigeration unit: • Diesel / Electric (380 V) Nsdpfx Ahowmn Suj Sedc • Remote control in the cab • Temperature recorder • !! Engine has been completely overhauled in our master workshop, 0 km! • !! Clutch new! - German vehicle - 1st owner! - TÜV / MOT inspection on request and for an extra charge: new! Errors and prior sale excepted! = Further information = Year of construction: 2015

Condition: new, Mitsubishi HA300NCB-S SPEC NO 84004 + Encoder OSA104 SN J4AVP4034B4, unused with signs of storage, 100% functional, scope of delivery as per photos Nedpfxeqx Ddvo Ah Sodc

Condition: ready for operation (used), Mitsubishi TRA 30C drive board, used, 100% functional. Nsdpfx Ahoi Eb N Ej Sjdc

Condition: ready for operation (used), Mitsubishi HA80C-SS servo motor, serial number: 53031 + OSE 5KN-6-12-108 encoder, serial number: 66319S, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nodpfx Aji D I Ryeh Sodc

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 400 mm, wire diameter (max.): 0.3 mm, overall weight: 2,700 kg, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Mitsubishi MP1200 wire EDM machine was manufactured in 2021. It features a robust design with a machine weight of 2700 kg and is equipped with the advanced D-CUBES controller. If you are looking to get high-quality wire electrical discharge machining capabilities, consider the Mitsubishi MP1200 machine we have for sale. Contact us for further details. Ndedpfx Aez E Su Eeh Sec - Machine Type: Wire Electrical Discharge Machine- Series: MP Series (Water Technology)- Type: TYPE II- Controller: D-CUBES- Power Supply: 3PE 50Hz AC200V, 35A, SCCR 2.5kA- Air Source: 0.5 MPa, 75 L/min- Operating Hours:- Machining Time: 3711- Start Time 1: 26- Start Time 2: 4137- Off Time: 426

Condition: used, mileage: 125,000 km, power: 132 kW (179.47 HP), fuel type: diesel, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,100 mm, loading space width: 2,500 mm, loading space height: 2,370 mm, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, spoiler, tachograph, tail-lift, Year of manufacture: 2020 Year of construction: 2020 Empty weight: 4.358 kg Carrying capacity: 3.132 kg GVW: 7.490 kg Tail lift: tail lift, 1000 kg = Additional options and accessories = - Airbag - Beifahrerbank - Front center armrest Ndedsz I Tt Uepfx Ah Sec - Outside temperature display - Radio - Reversing camera - Roof spoiler - Suspension seat - Tined glass - Toolbox

Condition: ready for operation (used), Mitsubishi ADU30B B0265 Power Supply, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ndsdpfji Eb Igex Ah Sec

Condition: good (used), Year of construction: 2009, operating hours: 1,850 h, functionality: fully functional, overall weight: 4,000 kg, Equipment: documentation/manual, The machine was put into operation in Switzerland in 2010 and operated flawlessly until its last day. The machine comes from a prototype development department, which explains the low number of operating hours. Nsdpsz Hzz Dsfx Ah Ssdc

Condition: excellent (used), functionality: fully functional, machine/vehicle number: F26-00153, Year of construction: 1997, operating hours: 775 h, load capacity: 3,500 kg, lifting height: 3,600 mm, fuel type: diesel, mast type: simplex, gearing type: automatic, tire condition: 85 %, overall weight: 8,430 kg, empty load weight: 4,930 kg, color: green, Equipment: cabin, head guard, lighting, For sale: forklift Nsdpfx Aez Sal Ioh Sjdc - Mitsubishi FD35A Diesel, manufactured in 1996. - Hour meter reading: 775 operating hours. - Lifting capacity: 3.5 tons. - Mast lift height: 360 cm. - Own weight: 4930 kg. - Complete lighting system. - Forklift in very good condition.

Condition: used, fuel type: diesel, power: 1,900 kW (2,583.28 HP), total length: 12,000 mm, total width: 2,400 mm, total height: 2,700 mm, Year of construction: 2004 Generator capacity: 2.100 kVA Availability: in stock Nodpfsz S Inpjx Ah Ssdc Current frequency: 60 Hz

Condition: used, power: 1,650 kW (2,243.37 HP), total length: 12,000 mm, total width: 2,400 mm, total height: 2,700 mm, Year of construction: 2008 Generator capacity: 1.650 kVA Availability: in stock Current frequency: 60 Hz Nedpfxsz S Invo Ah Ssdc

Condition: used, Year of construction: 2014, Mitsubishi MV 2400 S wire EDM machine Ndedpfx Ahszuvyas Soc Year of manufacture: 2014, available from the end of August.

Condition: used, fuel type: diesel, power: 1,900 kW (2,583.28 HP), total length: 12,000 mm, total width: 2,400 mm, total height: 2,700 mm, Year of construction: 2004 Empty weight: 24.500 kg Ndodpfjz Srgisx Ah Soc Fuel tank: 7500 litres Generator capacity: 2.000 kVA Current frequency: 60 Hz

Condition: used, Year of construction: 2015, Travel range: Nedoz D Egrspfx Ah Sodc X 600 mm Y 400 mm Z 400 mm Including coolant system Water bath machine

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, wire diameter (max.): 0.3 mm, table load: 3,000 kg, controller manufacturer: MITSUBISHI, controller model: MV-4800, number of axes: 5, wire diameter (min.): 0.15 mm, This 5-axis Mitsubishi MV-4800 wire EDM machine was manufactured in 2018. It features a travel capacity of 800 x 600 x 510 mm and can accommodate workpieces up to 1200 x 1020 x 505 mm with a maximum weight of 3000 kg. The machine is equipped with advanced control features, including a 15" touch screen and 3D CAD/CAM capabilities. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV-4800 machine we have for sale. Contact us for further details. Ndjdpoz Nk T Njfx Ah Sec - Travel (U, V): ±100 mm- Maximum Workpiece Dimensions: 1200 x 1020 x 505 mm- Maximum Workpiece Weight: 3000 kg- Table Base: Closed mounting base, 4-side hardened frame table- Drive System: Tubular direct drives in X/Y axes, Optical Drive System (ODS)- Measuring System: Linear scales in X, Y, U, V axes- Wire Threading: Intelligent AT - Automatic wire threading without water jet (for wire diameter 0.15 - 0.3 mm)- Wire Station: 20 kg wire station- Control Unit: MITSUBISHI ELECTRIC ADVANCE M700 with 15" Touch Screen- Control Features: 3D CAD/CAM on board, 10 GB user hard drive, ESPERADVANCE dialog system, 3D Parasolid import, 3D graphic check, Hand pilot- Control Interfaces: Ethernet TCP-IP, 2 x USB Port, prepared for mcAnywhere- Generator & Processing Technologies: - PFC (Precise Finish Circuit) high-speed sensing - HSS-AE Anti-Electrolysis Generator - ECONO CUT wire consumption reduction - POWER MASTER process safety system - CORNER MASTER³ radius shaping - ORBIT MASTER circular machining - DIGITAL AE II parallelism optimization - SL-CONTROL for height steps - TS-MASTER for homogeneous surface structures- Equipment: Automatic fine hole search, Easy 3D-Setup, Wire alignment block, Wire chopper, Compressor cooler, E.KO IONISER

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 2,326 h, lifting height: 220 mm, fuel type: electric, gearing type: automatic, battery capacity: 270 Ah, battery voltage: 24 V, battery weight: 150 kg, overall weight: 445 kg, empty load weight: 200 kg, total height: 1,600 mm, total length: 2,500 mm, total width: 800 mm, I am selling an electric forklift manufactured by Mitsubishi. It runs very well and can be tested on-site. The battery is in good condition. It has been inspected, and the defective cells have been replaced. Ndjdpfj Aa Aq Tex Ah Sjc

Condition: used, Year of construction: 2013, Mitsubishi glp3 Bj 2013 Nodpfxozt Rups Ah Sodc Working well Triple side shift

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, 2006 Mitsubishi D 16 Max, a 4-unit single web offset press with a 22.750” (578 mm) cutoff and 38” web width, featuring heat-set capabilities. Ndjdpjz Ezqcofx Ah Soc Semi-automatic plate changers with a plate positioning system for all 4 printing units. Folder type: Combination folder with a single cutter and digest fold. Mitsubishi Diamond 16 pinless combination folder with a single cutter and digest fold, capable of producing tabloid, magazine, and digest-folded products. Cutoff: 578 mm.

Condition: used, New: No Part suitable for: Mitsubishi Manufacturer: RG Waalwijk Havenweg 15 5145NJ WAALWIJK, NL robert. Ndodpfx Ahsxb Txtj Soc

Condition: used, power capacity // kW volt / V ampere / A total power requirement / kW weight of the machine ca. / t required space / m MITSUBISHI ELECTRIC CORP. AC SERVO MOTOR HA300C SERIAL: 0Z137 + Ndodeymgapspfx Ah Sjc TAMAGAWA FA-CODER TYPE: OSE 5KN-6-12-108

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,068 h, load capacity: 4,000 kg, lifting height: 3,240 mm, fuel type: gas, mast type: telescopic, construction height: 2,300 mm, gearing type: automatic, fork length: 2,400 mm, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 8.25-15, rear tire type: superelastic tires (black), rear tire size: 7.00-12, overall weight: 5,080 kg, total height: 2,300 mm, total length: 3,100 mm, total width: 1,400 mm, fuel: liquid petroleum gas (LPG), motor model: EBT-GK45-3B, Equipment: sideshift, MITSUBISHI FG 40 N – LPG forklifts TECHNICAL DATA Lifting capacity: 4.000 kg Lifting height: 3.240 mm Nedsz Aqfyjpfx Ah Sjdc Closed height: 2.300 mm Mast: Standard (2W324) Fork length: 2.400 mm Fork carriage: 3A Drive: 6-Zyl. Treibgas Engine: EBT-GK45-3B Transmission: Automatik Tyres: Superelastik 8.25-15 (70%) / 7.00-12 (60%) Service weight: 5.080 kg Length: 3.100 mm Width: 1.400 mm Year of manufacture: 2018 Operating hours: 7.068 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights ATTACHMENTS Sideshift Internal no.: 1201952 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.