Used Mix Tower for sale (2,882)

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. Knodpjzmyvisfx Afwsa 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Year of construction: 2019, condition: ready for operation (used), A complete and fully automated tank storage and mixing system for the production of non-alcoholic, non-explosive liquids is available. Stainless steel tanks: 2, tank volume: 5m³, total volume: 10m³. Equipment: load cells, dosing pump, agitators, control system and level sensors. The system has seen very little operation and is therefore in an almost like-new condition. Documentation available. An on-site inspection is possible. Ksdszl U H Hjpfx Afwona

Condition: new, STATIONARY CONCRETE BATCHING PLANT S160-TWN GENERAL Plant Type : Stationary Concrete Plant with TWIN Shaft Mixer Plant Capacity : 160m³/hour freshly compressed concrete Mixer Capacity : 6000/4000 lt (4m³ Compressed Concrete) Total Motor Power : 245kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY MAINTENANCE * SUITABLE TO WORK UNDER HARD CONDITIONS * ABLE TO PRODUCE RCC CONCRETE DETAILS: Compacted concrete capacity : 160 m³/h Air Compressor Capacity : 1400 lt/min Aggregate Hopper : 4×40 = 160m³ or 6×30 = 180m³ Mixer Type : TWIN Shaft (4m³). 6000/4000 lt capacity Aggregate Conveyor Band : 1200 mm * 35000 mm Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Kedpfxoflz Ins Afwsna Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, LANG Eco Tower 60 in like-new condition, consisting of: 1 × ECO TOWER 60 component loading tower, year of manufacture 2016 1 × ECO FEED component loading system, year of manufacture 2016 30 × Macro Grip vises 1 × LANG Quick-Point automated clamping tower This automation system can be easily integrated with any CNC milling machine and is available immediately! Knjdpfx Afjztvgqewja Capacity up to 60 vises!! Inspection possible at any time!

Condition: reconditioned (used), Ribbon mixer Machine has been overhauled Capacity: liters Motor power: 3kW, 23 rpm Material: Steel Kjdpfjwygclex Afwona

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: SNDE106744, input voltage: 400 V, input frequency: 50 Hz, Vacuum casting system was used to cast epoxy resin into plastic housings Knjdpfx Afsvnrz Dowsa

Year of construction: 2001, condition: good (used), VMI 2936L mixing vessel Ksdpfx Afoqqhh Rewsna 2001, Stainless, 2936L jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with Inoxpa centrifugal pump, 3Ph

Year of construction: 2001, condition: good (used), VMI 3500L mixing vessel Kedpfx Afeqqhhxewona 2001, Stainless, 3500L jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with centrifugal pump, 3Ph

Condition: used, Vertical tank with a top-entry three-bladed propeller agitator (TMR, 1.6 kW), most recently used for mixing diatomaceous earth. Additional title: vertical vessel with agitator Ksdpfx Ajzi Aqujfwsna Volume appr.: 1500 l Power: 1,6 kW Length: 1100 mm Width: 1100 mm Height: 2200 mm Position: standing on 4 feet Base construction: cylindrical vessel on feet Features: Agitator; manhole on the top; control cabinet

Condition: good (used), Imer mixing plant Type: Mix 360 Bowl diameter: 90 cm Boiler height: 52 cm Electricity: 400 V Knsdpfxjq Eh Huj Afwoa

Condition: good (used), Jordan MK1 High shear mixing plant Kodpfx Afow Dhhwswjna Stainless, 100L high shear mixing plant, mayo plant, variable speed high shear mixer, 4Kw, steam jacketed vessel, with Johnson lobe pump outfeed, variable speed pump, mobile, 3Ph

Condition: like new (used), Chemineer Ltd PD5M mixing tanks Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph Knodpfxokl Hq Ne Afwsa

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, We are selling our tower crane due to company downsizing. It is a POTAIN HUP 32-27 from 2019. The crane is in top condition with the usual signs of wear and tear. No known defects. The crane has not been used for rental purposes. Technical details: - Maximum outreach: 32 meters - Maximum hook height: 27 meters - Maximum lifting capacity: 4,000 kg (up to an outreach of approximately 12 meters) - Lifting capacity at the jib tip: 1,000 kg (at full 32-meter outreach) - Support base: 4 m x 4 m - Slewing radius: 2.25 meters or 2.75 meters In addition: - The crane is equipped with the TopSite system. - The crane has a central lubrication system (automated). - The cable guide chain in the mast (Potain recall) has already been replaced. - Includes a permanently installed connection cable, approx. 15m, with a 63A CEE plug. - The radio remote control is in very good condition, almost new. - Includes cable remote control. - Includes all technical documentation (original). - Includes concrete ballast. - Due to its transport length of approximately 12m, it can be used on very tight construction sites (see pictures). Knjdpfx Aszlb Epefwea The crane is currently located in 76870 Kandel and must be removed from there at the buyer's expense, including the ballast. Transport axles are not included in the offer. A suitable generator must be brought for functional testing, as there is no power supply on site. The sale is made without any warranty or liability for defects. Errors and prior sale are reserved. If you are interested, please contact us via message or email.

Condition: used, Suitable for 34K / 42K Without operational constraints Knsdpjzp Dgqefx Afwja 5 units in stock, each for €1950.00 Location: Langenzenn

Condition: used, Stainless steel inline mixer, mixing screw, paddle mixer Diameter: 280mm Length: 3000mm Motor power: 2.2kW, 30 rpm Knodpfozc Idnex Afwja See our other listings. VMA Wekerom

Condition: good (used), Year of construction: 1998, functionality: fully functional, Equipment: documentation/manual, Hansa Food-Mix 2000 – Industrial Cream Aerator / Continuous Mixer (similar to Mondomix®) For sale is a powerful Hansa industrial mixer Food-Mix 2000, specifically designed for the continuous processing and aeration of cream and similar products under hygienic conditions. Knjdpfoy I A Ersx Afwea The machine impresses with its robust stainless steel construction, precise process control, and high production capacity – ideal for use in the dairy and food industries. - Manufacturer: Hansa Industrie-Mixer GmbH & Co. KG (Germany) - Model: Food-Mix 2000 (re-infection free) - Year: 1998 - Design: Stainless steel frame and housing - Mobile: Machine mounted on castors - Infinitely variable mixing head drive - Speed range: 80 – 450 rpm - Motor power: 9.2 kW - Foam density: 400 – 900 g/l (cream) - Specific feed density: 1,000 – 1,200 g/l (cream) - Throughput: approx. 300 – 1,500 kg/h (cream) - Dynamic stainless steel mixing head - Mixing head volume: approx. 9 litres - Separate cooling for rotor/stator possible - Can be sterilized with steam

Condition: used, -Dimensions (LxWxH): 850x950x850mm Knsdpfx Aex Ux Snofwja -Capacity: 10 x 1/1 GN -Model: CPCM10 -Serial Number: E11CD03051089 -10 levels: 540x330mm -3 cooking modes: steam, convection, combination Gtjy Tdox Ux Snox Hdst -5 fan speeds -Voltage: 400V -Power: 19kW -Weight: 336kg

Condition: new, Year of construction: 2026, BITUMEN EMULSION SPRAYER ABS-8000 Bitumen Emulsion Sprayer ABS 8000 – is the optimal equipment for performing large volumes of work in the shortest possible time. Autonomous diesel engine makes it possible to install the equipment on any truck. Theelements of control are located on a separate panel in the driver’s cab with partial redundancy in the control cabinet, which facilitates the adjustment of equipment and the transition of its working bodies from the transport to the working position. High quality bitumen pump and shut-off valves ensure trouble-free operation of the equipment. SPECIFICATIONS Density of surface coating – from 100 g / m2 to 1600 g / m2 Spraying width – from 2 m to 3.7 m Cleaning system. Tank capacity 8000 l. Function of tank self-pumping. Spraying barblowing by compressor. Rear view camera with monitor in driver’s cab. Bitumen emulsion spraying dosing control (g/m2) via touch screen display in driver’s cab. The system for heating the bitumen emulsion with a diesel burner (Italy). Spraying rod control equipment (lowering and expanding) by means of a remote control in the driver’s cab and on the vehicle body. REQUEST A CALL Buy BITUMEN EMULSION SPRAYERS TM TICAB – the best decision for you! Our price is competitive today and tomorrow. Specifications: Density of surface coating – from 100 g/m2 to 1600 g/m2; Spraying width – from 2 m to 3.7 m; Cleaning system; Tank capacity 8000 l; Function of tank self-pumping; Spraying bar blowing by compressor; Knodjvpt Dcepfx Afwsa Rear view camera with monitor in driver's cab; Bitumen emulsion spraying dosing control (g/m2) via touch screen display in driver's cab; The system for heating the bitumen emulsion with a diesel burner (Italy); Spraying rod control equipment (lowering and expanding) using a remote control inside the driver's cab and on the sprayer body.

Condition: good (used), Year of construction: 2006, Complete AMMANN asphalt mixing plant Dryer drum with burner: 2006 Filter: 2014 ERMIIS automation: 2013 Capacity: 160 tons/hour Machine currently being dismantled Knodpfexqpvtjx Afwea

Condition: excellent (used), Year of construction: 2011, TOP TOWER 3000 asphalt mixing plant comprising: Ermont dryer drum + CBS burner + filter and hopper below filter + mixer, 6 dosing hoppers. 2 bitumen storage silos. Year: 2011. Capacity: 200 tons/hour. Knsdpfoxpm Ttjx Afwoa

Condition: good (used), Year of construction: 2006, Complete Ermont asphalt mixing plant AE feeders: 2005 Ermont drum: 2006 Knodpfx Afsxuwurowsa ERMIS control station: 2011 Capacity: 170 tonnes/hour

Condition: used, Mixing tank with two different agitators. Capacity approx. 20 hl Additional title: Vertical stainless steel container with two agitators Content: 2000 l Kjdpjzgc Arofx Afwena Length: 1500 mm Width: 1500 mm Height: 2200 mm Material: stainless steel Position: free standing Base construction: Cylindrical container with flat lid Features: 2 top-entry agitators, hinged lid, side outlet

Condition: used, Year of construction: 1991, Complete mixing tank system comprising three vertical pressure tanks, each with two cooling zones, frame insulation, a bottom-entry agitator and various fittings. One of the tanks is also equipped with a CO₂ gas injection unit and a pump for tangential feed. A pipe fence, pipe panel, control cabinet and various measurement and control equipment and pumps complete the system. Kedjzgcuzspfx Afwsna Additional title: Insulated, coolable stainless steel pressure tanks as a mixing system with proce Volume: 33000 l per tank Max. pressure: 2 bar Pump capacity: 28 m³/h Operating temperature: 40 °C Length: 2600 mm Width: 2600 mm Height: 8500 mm Weight: 3900 kg Operation / Control: Rush-Flow-Dosing: SPS-Typ = C7-633, HMI = ProTool Material: stainless steel 1.4301 Position: free standing Base construction: Cylindrical tank with dished ends and pipe feet on spherical caps Features: 2 zone frame cooling, insulation with stainless steel sheet panelling, agitator in the base, manhole at the side, tank fittings; 2 pumps; pipe fence; panel with CO2 fumigation; measurement and control technology; control cabinet with control panel; Other: Pipe fencing, pipe panels, measurement and control technology. Pumps, CO₂ injection unit

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: AC, Aquamix 32 – Water mixing and dosing unit Fully automatic water mixing and dosing unit with automatically controlled flow rate and numerical input. Technical data: Temperature inlets: 3 (with ice water) Dosing volume range: 0.1 l - 999.9 l Temperature control range: +0.5°C to +70°C Temperature accuracy: +/-2°C Dosing accuracy from 1 l: +/- 0.1 l Kodpfx Ajygdayefwsna Water flow rate at 3 bar: up to 30 l/min Water connection: 3/4" external thread Power connection: 220 - 240V Device dimensions W x H x D: 300 x 300 x 170 mm Used device We have other devices in stock!

Year of construction: 2024, operating hours: 2 h, condition: new, functionality: fully functional, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precautionary measure, the basket was completely shot-blasted, and every single stainless steel component was pickled and then hand-polished. All screws and nuts have been replaced with new ones, all shafts have been replaced with stainless steel, and all ball bearings have also been replaced with stainless steel deep groove ball bearings. Replacement motors (drive for the basket and for the modular belt), as well as approximately 20 meters of modular belt, are included as spares. Total modular belt width: approx. 340 mm, blue area width approx. 280 mm, outer side areas on the right and left made of stainless steel. Total belt length: 100 m. Number of tiers: 9. Spacing between each tier: 105 mm. Overall tower height: 2060 mm. Kedpfxsyvrvpj Afwjna Overall length incl. discharge belt: approx. 4000 mm; discharge section: approx. 2000 mm; total width: 2235 mm; running surface inner width: 370 mm; running surface outer width: 465 mm. Modular belt is made of stainless steel and POM. This spiral cooling tower also comes with a Z-belt. The Z-belt shown is for reference only and is not the original.