Used Extraction System For Grinding Dust for sale (32,803)

Condition: used, Grinding Dust Extraction Table SAT Type SATp2 Length A: 2100 mm, Length B: 1770 mm Filter area: 17.6 m² Motor: 2.2 kW Weight: 295 kg Mobile Gtodpfx Aswixrdjfwjt

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, nominal power: 11 kW (14.96 HP), Wet extraction for metallic dusts with 11kW and approx. 6000 m³/h. Demonstration machine in very good condition. Gjdpfx Afjxw Ib Iewjtt

Condition: good (used), suction capacity: 3,300 m³/h, negative pressure: 2,000 Pa, Dust extraction, welding fume extractor, self-cleaning filter, cartridge filter for plasma, laser, sandblasting, shotblasting The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: DUST HOG / UAS Model: SBS-4-2 SD Engine power 4 Kw Fan in sound-absorbing housing Capacity 3300 m3/h Vacuum - 2000 Pa Filtration area - 112m2 Inlet diameter - 300 mm Gedpfounh Uvox Afwett Cartridge filter cartridges - 4 pieces. Height - 3.90 m depth - 1.70m width - 1.25m

Condition: good (used), Year of construction: 1998, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan Gtjdorp Ii Ujpfx Afwet -Manufacturer: Eurovent, dust extraction fan radial fan type MPR 502 -Motor: AEG 5.5 kW 2860 rpm -Volume flow: 3000 m³/h -Pressure: 3900 Pa -Connection: Inlet Ø 305 mm -Connection: Output 220 x 160 mm -Base plate: 415 x 400 mm -Dimensions: 755/750/H770 mm -Weight: 100 kg

Condition: excellent (used), OptiAir unit to extract dust when predusting food products with fine flour. Gtodpfx Afex Hamqowjt

Condition: used, Complete extraction system Scheuch for a medium operation, consisting of: * Scheuch RH-filter type FRH36-H2-03 * Filter top with automatic shaking * Dust collection sump with screw and cage rotor feeder * Heat recovery * Extinguishing device * Extensive pipes, branch lines and pneumatic shut-off valves * Container connection station with fan * Radial fan 1: 30 kW * Radial fan 2: 7.5 kW * Radial fan 3: 4 kW * Control with Siemens PLC. Gsdpfxex Tfl Se Afwott filter area: 312 m²

Condition: reconditioned (used), Year of construction: 2019, operating hours: 6,700 h, functionality: fully functional, machine/vehicle number: 3.9 - 1200C, type of input current: three-phase, input voltage: 400 V, filter area: 40 m², suction capacity: 1,500 m³/h, negative pressure: 3,000 Pa, compressed air connection: 5 bar, power: 3 kW (4.08 HP), extraction connection diameter: 200 mm, LM Ecocell 1500 Godpfx Afjx Rrlmjwjtt Year of manufacture: 2019. 3 KW / 6 A / 50 HZ Type: 3.9 - 1200C - Equipped with DOL relay start in original LM control unit, with on/off and automatic start-up functions. - Price includes 9x 4.5m² NEW filter cartridges installed in the unit upon sale. - Price includes 1x NEW HEPA filter cartridge installed in the unit upon sale. - Equipped with compressed air cleaning system, Delta P controlled. - Ex works Soerendonk (NL), loaded on truck free of charge. Tested and operational, can be demonstrated in our workshop. - Sold as seen, no warranty. - Tested on site and in proper working order. - Testing and inspection possible.

Condition: excellent (used), Dust extraction Walther NOVA 2000 with 2 extraction arms mobile on rollers Gsdpfx Ajivta Njfwstt 2 pieces available Very good condition ready for use!!!

Year of construction: 2012, condition: good (used), functionality: fully functional, For sale is a CFT compact filter technic top-mounted dust extraction system, type HKAF 12-30 The system is fully functional and ready for use immediately after connection Godpfx Aferfcpmewjtt All documentation for the system available thanks to CFT Digital Contact details can be passed on after purchase. Technical data: Year of construction: 2012 Length: 2476 mm Width: 1277 mm Height: 2330 mm Weight: 600 kg Exhaust air flow rate: 28 m3/min Filter elements: 12 pieces Filter area: 30 m² Filter material PMB 600*500 Shock valves: 4 pieces Rotary cycle control unit: 12 cycles Compressed air parameters: 4.5 bar Loading & or shipping possible for an additional charge Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 0.6 kW -Speed: 2800 rpm -Volume flow rate: m³/h -Pressure: Pa -Inlet connection: Ø 150 mm -Output connection: 150 x 110 mm Gtsdpfx Afeca D Edjwot -Impeller: Ø 260 mm -Number: 1x fan available Price: per piece -Dimensions: 450/400/H390 mm -Weight: 19 kg

Condition: used, filter area: 1.65 m², negative pressure: 1,800 Pa, total height: 1,900 mm, total width: 650 mm, total length: 1,100 mm, volume flow: 2,000 m³/h, overall weight: 50 kg, nominal flow rate: 2,000 m³/h, intake manifold diameter: 140 mm, input voltage: 380 V, extraction connection diameter: 140 mm, space requirement length: 1,100 mm, space requirement width: 650 mm, space requirement height: 1,900 mm, power: 1.1 kW (1.50 HP), nominal power: 1.1 kW (1.50 HP), transport width: 650 mm, transport length: 1,100 mm, transport height: 1,900 mm, No. 3258 Mobile extraction unit / mobile dust extractor Scheppach HA 3200 Used For extracting wood shavings, milling chips, sawdust and sanding dust Motor 1.1 kW, 380 V Air output 2000 m3/h Pressure difference max. 1800 Pa Extraction connection diameter 140 mm Impeller diameter 320 mm Special filter diameter 500 mm, height 800 mm Filter surface 1.65 m2 Extraction unit mobile with 2 swivel castors Transport dimensions approx. 1100 x 650 x 1900 mm LWH Weight approx. 50 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Godpfjx Hi Rxox Afwott Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: new, functionality: fully functional, Year of construction: 2025, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. Gedox Agpzepfx Afwett A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Condition: excellent (used), Extraction dust removal Nedermann type 663 Gtsdpfsiyyxcex Afwjt with 2 suction arms Very good condition, directly from production!!!

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 1.1 kW -Speed: 2810 rpm -Max. volume flow: m³/h -Max. pressure: Pa Gedpfxjdz Umrj Afwstt -Inlet connection: Ø 300 mm -Outlet connection: Ø 290 mm -Impeller: Ø mm -Number: 2 fans available -Price: per piece -Dimensions: 970/770/H660 mm -Weight: 46 kg

Condition: used, filter area: 1.65 m², negative pressure: 1,800 Pa, total height: 1,900 mm, total width: 650 mm, total length: 1,100 mm, volume flow: 2,000 m³/h, overall weight: 50 kg, nominal flow rate: 2,000 m³/h, intake manifold diameter: 140 mm, extraction connection diameter: 140 mm, space requirement length: 1,100 mm, space requirement width: 650 mm, space requirement height: 1,900 mm, power: 1.1 kW (1.50 HP), nominal power: 1.1 kW (1.50 HP), transport width: 650 mm, transport length: 1,100 mm, transport height: 1,900 mm, No. 3257 Mobile extraction unit / mobile dust extractor Scheppach HA 3200 Used For extracting wood shavings, milling chips, sawdust and sanding dust Gsdpex Hi H Hjfx Afwjtt Motor 1.1 kW, 380 V Air output 2000 m3/h Pressure difference max. 1800 Pa Extraction connection diameter 140 mm Impeller diameter 320 mm Special filter diameter 500 mm, height 800 mm Filter surface 1.65 m2 Extraction unit mobile with 2 swivel castors Transport dimensions approx. 1100 x 650 x 1900 mm LWH Weight approx. 50 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 0.37 kW -Speed: 2800 rpm -Max. volume flow: m³/h -Max. pressure: Pa Gtodedz Umpspfx Afwjt -Inlet connection: Ø 190 mm -Outlet connection: Ø 190 mm -Impeller: Ø mm -Dimensions: 700/580/H560 mm -Weight: 37 kg

Condition: good (used), Year of construction: 1992, radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: approx. 3 kW -Inlet connection: Ø 230 mm -Output connection: 335 x 290 mm -Impeller: Ø 340 mm -Dimensions: 540/580/H660 mm Gtjdpfx Asb Rh U Tofwot -Weight: 80 kg

Condition: good (used), Year of construction: 2006, radial fan, dust extraction blower, fan, extraction, dust blower, blower Gedpfx Asg N Dhwjfwett -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 -Volume flow rate: 20000 m³/h -Motor: Hoyer 11 kW 1460 rpm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm -Total weight: 584 kg

Condition: good (used), Year of construction: 1998, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan Gtsdpfx Aotz Hubofwet -Dust extraction fan: Radial fan type -Motor: Loher 3.5 kW 955 rpm Ex protected -Volume flow: m³/h -Connection: inlet Ø 500 mm -Connection: Output 400 x 500 mm -Dimensions: 1160/880/H950 mm -Weight: 153 kg

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower -Engine power: 3.6 kW -Speed: 1440 rpm Gtsdpfx Ajb Ilxdjfwst -Volume flow rate: m³/h -Inlet connection: Ø 450 mm -Outlet connection: Ø 450 mm -Impeller: Ø 670 mm -Quantity: 1 available -Dimensions: 1200/1100/H1350 mm -Weight: 242 kg

Condition: good (used), Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan, low pressure radial fan -Manufacturer: Dietz, low-pressure radial fan type DN 14 -Motor: Dietz 0.45 kW 2880 rpm -Volume flow: 19 m³/min -Connection: inlet Ø 130 mm -Connection: Output 110 x 110 mm Gtedpfjuncwxsx Afwet -Protection class: IP56 -Dimensions: 380/300/H295 mm -Weight: 15.4 kg

Condition: good (used), Year of construction: 1985, radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 0.4 kW -Speed: 1276 rpm -Total pressure: 260 Pa -Volume flow rate: 3200 m³/h -Inlet connection: Ø 400 mm Gtodscii N Sopfx Afwet -Outlet connection: 360/470 mm -Dimensions: 1130/560/H780 mm -Weight: 106 kg

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower, blower, exhaust fan -Manufacturer: Nedermans, Dust extraction blower exhaust fan 500725 -Motor: 0.37 kW 3000 rpm -Fan wheel: Ø 290 mm -Connection: Inlet Ø 130 mm -Connection: Output Ø 120 mm Godehprg Aspfx Afwott -Dimensions: 540/420/H520 mm -Weight: 24 kg

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas suction fan -Manufacturer: Coral, dry grinding dust extraction filter system type GRINDEX Gsdpfxorw A U Ij Afwett -Power: 0.75 kW / 2810 rpm -Individual components/technical data: see photos -Dimensions: 855/750/H1085 mm -Weight: 120 kg

Condition: good (used), Year of construction: 1983, radial fan, dust extraction blower, fan, extraction, dust blower -Type: HL8-355/595-A -Motor power: 15 kW -Speed: 2900 rpm -Volume flow rate: 10,000 m³/h -Total pressure: 3500 Pa -Inlet connection: Ø 350 mm Gjdpfx Aob A Siuofwott -Outlet connection: Ø 350 mm -Dimensions: 2000/1000/H1350 mm -Weight: 260 kg