Used Mori Seiki Sv 50 for sale (159)

Year of construction: 2012, operating hours: 6,500 h, condition: ready for operation (used), Main Drive Number of axis 3 Gjdpfjxfmn Asx Ag Nskc Media Chip conveyor Yes Additional Equipment 15 bar pump with filter KITAGAWA Hollow Clamping Device with KITAGAWA SS1881K21 for the main spindle Coolant system with increased pressure (5 bar) Hinged belt conveyor, right-hand discharge Integrated parts catcher for the main spindle Interface for bar feed, LNS Double foot switch with protective cover Signal light (red, yellow, green) Tool overhang length 100 mm for driven Y-axis travel + Tool holder package Transformer 45000 VA This 3-axis DMG Mori Seiki NLX2500Y 700 was manufactured in 2012. It features a KITAGAWA Hollow Clamping Device, enhanced coolant system at 5 bar, and an integrated parts catcher. Additional attributes include a hinged belt conveyor, I/F for bar feed, and a signal light system. Ideal for turn-mill operations, consider the opportunity to buy this DMG Mori Seiki NLX2500Y 700 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 2008, Parts shown by hand not come. Gjdpfx Aoxhg Eyeg Njkc

Condition: ready for operation (used), Year of construction: 2012, Mori Seiki NLX2500MC Turning Centre (2012) Mori Seiki M370BM Control Manufactured & Installed in 2012 Various Live Tool Holders & Various Static Tooling Supplied Tool Setting Arm, Tailstock, 10” Chuck, Swarf Conveyor, Mist Extraction Machine Capacity: Max’ Swing over Bed 544mm Max’ Swing over Cross Slide 541mm Max’ Recommended Turning Dia’ 366mm Standard Turning Dia’ 271mm Max’ Turning Length 705mm Max’ Bar Work Dia’ 80mm X Axis Travel 260mm Z Axis Travel 795mm Spindle: Main Spindle Speeds 4000rpm 2 Spinde Ranges Spindle Nose A2-8 10” Chuck Turret: Number Of Tool Stations 10 Height of Angle Tool Shank Section 25mm Dia’ of Borig Bar 50mm Live Tooling Speeds 6000rpm General Dims: Gkodow Rrzaopfx Ag Njc Machine Dims - 3380 x 1980mm Weight 5500kg For sale with Jet Machinery Ltd Jet Machinery Stock No: #78831 Machine Serial Number: NL253120316 Ex works - £54,950.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 4017, overall weight: 4,200 kg, - Year of manufacture: 1990 - 1st owner and from own use, well maintained - Fully functional, powered, ready for demonstration Gedpfexgt Acox Ag Njkc - X-axis travel: 160 mm - Z-axis travel: 590 mm - Swing diameter over bed: Ø520 mm - Swing diameter over cross slide: Ø350 mm - Centre distance: 625 mm - Machining diameter: Ø230 mm - Max. machining length: 550 mm - Number of tool stations: 12 - Main spindle motor: 15/11 kW - Control: Fanuc Series O-T - Dimensions: 2860x1520x1750 mm – 4200 kg Net price unloaded ex location Luckenwalde (Germany), without transport

Condition: used, Year of construction: 2001, functionality: fully functional, Japanese-built 4-axis CNC lathe for secondary machining, featuring C axis, Y axis, and driven tools. Installed in 2002 and compliant with CE standards, with the following main specifications: Turning diameter: 755 mm Workable diameter: 390 mm Workable length: 655 mm 12-position driven turret Y axis travel: +/- 60 mm C axis Spindle nose: A2-8 Kitagawa B-210, 250 mm Spindle speed: 3,500 rpm Spindle motor: 18.5 kW Driven tool motors: 5.5 kW Driven tool speed: 4,000 rpm Bar capacity: 73 mm Tailstock: MT5 Rapid traverse speed: 18 and 24 m/min on X and Z axes Weight: 5,800 kg Complete with: - Hydraulic programmable tailstock - Box ways - Chip conveyor - Headstock oil cooling - Dual foot pedal for main chuck and tailstock open/close Gjdpfx Agsxf Iyge Nokc - Set of fixed tool holders - Set of driven tool holders - Complete manual set - CE certificate

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, TECHNICAL DETAILS / TECHNICAL DETAILS: - CNC Control: CNC Control: M730BM - X axis mm: X axis mm: 260 - Z-axis mm: Z axis mm: 795 - Y-axis mm: Y-axis mm: +/- 50 - Max. Turning Diameter mm: / Max. Turning Diameter: 366 mm - Incremento Eje Cº / Cº Axis Increase: 0,001 - Max. Turning Length / Max. Turning Length : 705 mm - Swing over bed / Swing over bed mm: Ø 920 - Swing over slide / Over cross slide mm: Ø 742 - Paso de Barra / Bar work capacity mm: Ø 80(main) / Ø 51 (sub) - Rapid traverse max. m / min X,Z - Rapid traverse max. m / min X,Z: X,Z,B 30, Y 10 - Main spindle / L-SPINDLE 12 - Spindle speed / Spindle speed rpm: 4.000 - Spindle power kW: 18,5 Gkedpjvftqbofx Ag Noc - Spindle Nose Main / Spindle Nose Main: A2-8 - Sub spindle / Sub-SPINDLE: 10 - Spindle speed rpm: 6.000 - Spindle power kW: 11 - Spindle Nose Main: A2-5 - Upper Turret Positions: 12 - Number of rotating tool stations (Each turret): 12 - Rotating tool speed rpm / Velocidad de Herramienta motorizada / Rotating tool speed: 6.000 - Potencia Herramienta Motorizada / Rotary Tool power: 5,5 EQUIPAMIENTO / EQUIPMENT: - Chip Conveyor / Extractor de virutas / Chip Conveyor - 3 colors status lamp / 3 colors status lamp - Portaherramientas fijos / Fixed tool holders - Extractor of parts / Extractor - Cargador de barras / Bar loader IEMCA Master 880 Verso / IEMCA Master 880 Verso bar loader DIMENSIONES DE LA MAQUINA / MACHINE DIMENSIONS - Longitud mm: Length : 4.414 mm - Width mm: Width: 2.370 mm - Altura mm: Height: 2.115 mm - Peso kg: Weight: 6.360 kg

Condition: good (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, CNC control MSC 803 25-fold automatic tool changer coolant device Gkodpfjwhkcxox Ag Noc Technische Daten / technical details: Verfahrweg X / X-Travel 510 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 510 mm Tischgröße / table size 750x550 mm Drehzahlbereich / spindle speed 8000 UpM /rpm Anzahl der Werkzeugplätze / tool places in changer 25 fach Spindelaufnahme / spindle taper BT40 Gewicht der Maschine ca. / weight 4500 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2009, CNC controller: M720BM Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 (100) Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø 356 Swing over bed mm: ø 923,8 Swing over cross-slide mm: 755 Bar work capacity mm: 80 C-axis degree: 0,001° Upper turret Number of tool slots St .: 12 Speed ​​driven tools RPM: 6.000 Drive power driven tools kW: 5,5/3,7 (3 min/cont) Indexing time s: 0,25 Main spindle Speed ​​spindle rpm: 4.000 Drive power spindle kW: 18,5/15 (25% ED/cont) Spindle bore mm: ø91 Gedpfx Ajxcqz Isg Nekc Tailstock Tailstock travel mm: 734 Holder: MT5 Equipment Chip conveyor Tool measuring arm

Condition: ready for operation (used), Year of construction: 2006, Mori Seiki NL3000Y/1250 Turning Centre (2006) Mori Seiki MSX-850II Control Manufactured & Installed in 2006 Various Live Tool Holders & Various Static Tooling Supplied Tool Setting Arm C & Y Axis Tailstock 12” Chuck Swarf Conveyor Machine Capacity: Max’ Swing over Bed 995mm Max’ Swing over Cross Slide 825mm Max’ Recommended Turning Dia’ 420mm Standard Turning Dia’ 310mm Max’ Turning Length 1260mm Max’ Bar Work Dia’ 90mm X Axis Travel 210 + 70mm Y Axis Travel 120mm (+- 60) Gkedpfx Aow Rry Njg Noc Z Axis Travel 1370 C Axis 0.001 Spindle: Main Spindle Speeds 3000rpm 2 Spinde Ranges Spindle Nose A2-8 12” Chuck Turret: Number Of Tool Stations 10 Height of Angle Tool Shank Section 25mm Dia’ of Borig Bar 50mm Live Tooling Speeds 6000rpm General Dims: Machine Dims - 4522 x 2291mm Weight 8100Kgs For sale with Jet Machinery Ltd Jet Machinery Stock No: #78830 Machine Serial Number: NL301FJ0675 Cost: £55,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2014, Max. cutting diameter 366mm, max. cutting length 510mm, bar capacity 65mm, swing 923mm, Mori M730BM Control, Spindle speed 5,000rpm, milling speed 10,000rpm, C axis 0.001 degrees Y axis -/+ 50mm Godpfjwybd Rex Ag Njkc spindle motor power 11kw, 12 station Turret Swarf conveyor, Coolant, collet chuck, tool setter

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements width 3056 mm Measurements depth 3994 mm Measurements height 2187 mm Machine weight 6360 kg Main Drive Spindle speed range 4000 Number of axis 5 Movement X-Axis Movement 260 mm X-Axis Rapid Traverse 30000 mm/min Y-Axis Movement ±50 mm Y-Axis Rapid Traverse 0000 mm/min Z-Axis Movement 795 mm Z-Axis Rapid Traverse 30000 mm/min B-Axis Movement 734 mm B-Axis Rapid Traverse 30000 mm/min Workpiece Gkjdpfx Agjxgwbps Njc Workpiece drm over bed 590 mm Workpiece drm over support 360 mm This 5-axis MORI SEIKI NLX 2500 SY/700 was manufactured in 2010, featuring a max swing over bed of 590 mm and a cutting length of 795 mm. It includes Y and C axes, a sub-spindle, and high-pressure coolant system. Capable of handling bar work up to 80 mm, it's equipped with a chip conveyor and automatic bar feeder. Consider the opportunity to buy this MORI SEIKI NLX 2500 SY/700 turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: like new (used), Year of construction: 2007, functionality: fully functional, TECHNICAL DETAILS CNC Control: MSX 711III MAPPS IV (FANUC) X axis travel (mm): 730 Y axis travel (mm): 510 Z axis travel (mm): 510 B axis travel (mm): +160° / -180° C axis travel (degrees): 360° Number of pallets: 1 Table diameter (mm): Ø500 Table load capacity (kg): 300 Cutting feed rate X/Y/Z (mm/min): 50,000 / 50,000 / 40,000 Rapid traverse max. X/Y/Z (m/min): 50 / 50 / 40 Main spindle speed (rpm): 12,000 Spindle power (kW): 18.5 / 15 Spindle taper: BT-40 Gksdpfxjwv Sguj Ag Noc Torque (Nm): - Tool changer type: Chain Magazine capacity (tools): 61 Max. tool diameter (mm): 90 Max. tool diameter with adjacent stations empty (mm): 125 Max. tool length (mm): 300 Max. tool weight (kg): 8 Coolant tank capacity (l): 750 Through-spindle coolant (bar): Yes EQUIPMENT Rotary table with digital units: Included Work light: Included Through-spindle cooling: Included Electronic handwheel on CNC panel: Included MACHINE DIMENSIONS Length (mm): 2,771 Width (mm): 3,948 Height (mm): 3,264 Weight (kg): 12,400

Condition: good (used), Year of construction: 2006, functionality: fully functional, Mori Seiki MT 1500 Lathe Year 2006 CNC Fanuc The machine is always powered for demonstration 9 AXES (4-axis milling spindle, 3-axis turning turrets, 1-axis sub-spindle with indexing, collet or chuck spindle with indexing) 77054 hours powered on and 50853 operating hours With tooling Gkedpfx Ajwztttsg Nec Complete machine with chuck and a large selection of tooling

Condition: excellent (used), functionality: fully functional, turning length: 530 mm, turning diameter over cross slide: 620 mm, turning diameter: 260 mm, spindle motor power: 15,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 3,500 rpm, spindle bore: 80 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, Mori Seiki SL-25Y/500 CNC LATHE With 1.5m LNS bar feeder Control: Mori Seiki MF-T6 Tool holders: (2) Radial live tolls (2) Axial live tools (4) inside tool holders (4) outside tool holders Swing over bed: 815 mm (32.1″) Swing over cross slide: 620 mm (24.4″) Gkjdpfx Ajw Ett Ieg Nec Distance between centers: 620 mm (24.4″) Max. turning diameter: 260 mm (10.2″) Max. turning length: 530 mm (20.9″) X-axis travel: 195 mm +130 +65 (7.7″ + 5.1″ + 2.6″) Z-axis travel: 590 mm (23.2″) Y-axis travel: 100 mm ±50 (3.9″ ± 2.0″) Spindle speed range: 35 – 3,500 RPM Spindle nose: JIS A-8 Through spindle hole diameter: 80 mm (3.1″) Spindle bearing inner diameter: 130 mm (5.1″) Number of tool stations: 12 Shank height for square tool: 25 mm (1.0″) Shank diameter for boring bar: 50 mm (2.0″) Turret indexing time: 0.25 sec Rotary tool spindle speed: 100 – 2,000 RPM Rotary tool cutting capability: End mill max Ø20 mm, Face mill max Ø50 mm, Tap max M12 Rapid traverse rate:   X-axis: 12,000 mm/min (472.4 IPM)   Z-axis: 15,000 mm/min (590.6 IPM)   Y-axis: 10,000 mm/min (393.7 IPM) Feed per revolution:   X-axis: 0.001 – 342 mm/rev   Z-axis: 0.001 – 342 mm/rev   Y-axis: 0.001 – 500 mm/rev Jog feedrate: 6,000 mm/min (236.2 IPM) Tailstock travel: 403 mm (15.9″) Tailstock spindle diameter: 110 mm (4.3″) Tailstock spindle travel: 100 mm (3.9″) Tailstock taper: MT-5 (Live center) Spindle motor power (30 min/cont): 15/11 kW (20/15 HP) Rotary tool spindle motor: 3.7/2.2 kW (5/3 HP) Electrical power supply: 44 kVA Coolant tank capacity: 100 liters (26.4 gal) Machine height: 2,060 mm (81.1″) Floor space: 3,183 × 1,799 mm (125.3″ × 70.8″) Machine weight: 5,400 kg (11,900 lbs)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: NT315HF0043, Control MSX-711 (Fanuc 3Li) for 5axes simult. Spindel A2-5 40 pos. ATC type Capto C5 Bar-feeder LNS MoveS2 INVENTORY NR.2180207, MACHINE EQUIPPED WITH : Control MSX-711 (FANUC 3Li) for 5 axes simultaneous machining, color screen 15’’ and dialog system MAPPS III Memory capacity up to 1000 programs Options : tools correctors (milling spindle), B tools life gestion, input of tools correctors G10, 3 interpolations, variable thread step (G34), circular threading, personalised macro, high precision contouring control (control II contour AI), card ATA 1 GB, offset tool for 5 axes machining Chips conveyor (with chain) model/500 B-axis with direct motor (DDS) ATC type CAPTO C5/ 40 positions Tools to zero setting system with automatic arm for milling spindle High-pressure cooling system type KNOLL with 500L tank, pump and paper filtration, for cooling through spindle centre Cutting fluid coolant unit Type KNOLL Linear measuring system for Axes X1 / Y / Z1 Tool monitoring system through control of main spindle motor and feed motors Automatic workpiece measuring system with touch-test RENISHAW and macro B for use in Milling spindle Light signal Automatic machine stop Workpieces receptor vat Ø52mm, L120mm 10 additional M functions Flange for cylinder, threaded ring, traction tube, bore Ø 52 Clamping chuck HAINBUCH Spanntop Axzug Nova, with stop type 100 for pieces in chuck and for jobs in bars with passage, clamping head type 32, A2-5 direct mounting, adapter Gsdpfxjd Hkucs Ag Nokc Hydraulic chuck KITAGAWA, type BB206A5, Ø170mm, A2-5 direct mounting, passage Ø52mm Bar-feeder LNS, Type Move S2 Diameter of roung bars : Ø8 – 80 mm, bars length : 700 mm – 1600 mm ; loading from the front ; longitudinal shift : 470 mm ; set of guidings Ø18-20 Ø24-26 and Ø28-30 ; pushers : 1x Ø 8 – 1x Ø 15 mm ; guiding devices for main spindle Ø 21 – 26 and 31 mm Fire extinctor through carbonic gas type Tyco KLA III with 10kg CO2 Aspiration system ELBARON RON/A 3000 D-2H with full rest

Condition: good (used), Year of construction: 2002, Technical details are shown on picture. Godpfow U Alqsx Ag Nekc Parts shown on pictures not come.

Year of construction: 2005, condition: ready for operation (used), Main Drive Spindle speed range 6000 Number of axis 6 Gedpfx Agexlllgj Nokc Movement X-Axis Movement 260 mm Z-Axis Movement 590 mm This 6-axis MORI SEIKI NL2000SY/500 was manufactured in 2005, featuring X-axis travel of 260 mm, Z-axis travel of 590 mm, spindle power of 5.5 kW, and a spindle speed of 6,000 rpm. It includes a 12-position tool turret. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL2000SY/500 machine we have for tact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2008, In good technical condition and fully operational. Year of manufacture: 2008. Additional Y-axis ±60 mm Maximum spindle speed 3,000 min⁻¹ Spindle motor power 22/18.5 kW Maximum driven tool speed 6,000 min⁻¹ - 300 mm chuck with 90 mm through hole, spindle head A2-8 Gkodpfjxdcigjx Ag Nsc - Increased power and torque 25/30 kW, 1,000/1,300 Nm - Turning diameter 420-500 mm - Turning length 1,250 mm - C-axis, driven tools - NC tailstock, fully programmable, separate motor - Increased Z-axis power - New chip conveyor

Condition: used, Year of construction: 2006, functionality: fully functional, turning length: 1,000 mm, turning diameter: 400 mm, spindle bore: 56 mm, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 460 mm, rapid traverse Z-axis: 80 m/min, rotational speed (max.): 12,000 rpm, overall weight: 10,500 kg, fuel: electricity, number of slots in tool magazine: 40, Mori Seiki MT 1500 SX 9-axis milling and turning center, manufactured in 2006, with Fanuc Series 18iB (MSX-501) control, maximum chuck length of 920mm, maximum diameter of 400mm, bore size of 56mm, 4000 and 6000 rpm spindle rotation, and 12,000 rpm milling spindle. 12-position turret with live tools, Y axis, B axis +/- 120, C axis 0.001, ATC 40 tools, and chip extractor. In excellent working condition and can be seen working in Portugal. Gkedpfxsh Elp Ej Ag Njc

Condition: excellent (used), Year of construction: 2006, operating hours: 7,562 h, turning length: 515 mm, turning diameter: 366 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, rotational speed (max.): 6,000 rpm, total height: 2,120 mm, total length: 2,705 mm, total width: 2,000 mm, overall weight: 5,500 kg, CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 590 B-axis travel mm: 624 Gkedpfx Agju T H Dxo Njc Turning length mm: 515 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 923.8 Swing over cross-slide mm: 755 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 16 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5/5.5/3.7 (3min/5min/cont) Indexing time s: 0.25 Main spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 61 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 43 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Coolant system Tank capacity liter: 235 Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Interface for Bar feeder Bar loader IEMCA MASTER 880/MP 33 LL Working time hours Potencial nominal kVA: 27.4 Basic machine dimensions / weight Length mm: 2.705 Width mm: 2.000 Height mm: 2.120 Weight kg: 5.500

Condition: reconditioned (used), Year of construction: 2012, CNC controller: MSX-711 (MAPPS IV) Capacity Turning length mm: 1.540 Max. turning diameter mm: ø ø610 (Turret 2 ø274) Swing over bed mm: ø ø660 Swing over cross-slide mm: ø660 (Turret 2 ø300) Bar work capacity mm: ø65 Turn-mill spindle Full indexing specifications X-axis travel mm: 495 Y-axis travel mm: ±125 Z-axis travel mm: 1.560 B-axis degree: ±120° Speed ​​spindle rpm: 12.000 Drive power kW: 18,5/11 (10 min./cont) Tool magazine Magazine places: 76 Tool holder: Capto C6 Gkodpfx Aewztq Eeg Nsc Tool length max. mm: 300 Tool diameter max. mm: ø125 Tool weight max kg: 8 Lower turret X-axis travel mm: 160 Z-axis travel mm: 1.402 Number of tool slots St .: 10 Speed ​​driven tools RPM: 6.000 Drive power driven tools kW: 1,5/1,2 (15%ED/cont) Indexing time s: 0,19 Main spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Spindle bore mm: ø73 Chuck type: BB208 Manufacturer: KITAGAWA Spindle nose: A2-6 Maximun torque Nm: 230/159 (15%ED/cont) Counter spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Spindle bore mm: ø73 Chuck type: BB208 Manufacturer: KITAGAWA Spindle nose: A2-6 Maximun torque Nm: 230/159 (15%ED/cont) Equipment Spindle 2 with tailstock option Electronic Handwheel Interface High-pressure coolant system (70 bar) Chip conveyor Air blow for chuck and tool tip Workpiece measuring system (RENISHAW OMP60) Auto tool presetter for upper and lower Bar feeder interface

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : CA40 (Big+) - Spindle power : 22 [kW] - Spindle speeds : 14000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 1020 x 510 x 510 [mm] - Rapid traverses rates (X/Y/Z) : 42/42/42 [m/min] TOOL CHANGER - Tool magazine capacity : 60 TABLE - Table dimensions : 1320 x 660 [mm] - Distance table / spindle nose (min./max.) : 150-660 [mm] - Maximum weight upon table : 1200 [kg] WEIGHT & DIMENSIONS - Machine floor space : 2788 x 3040 [mm] Gsdpfx Aeuhbvfog Nekc - Machine height : 2603 [mm] - Machine weight : 8600 [kg] MACHINE HOURS - Number of hours under power : 14466 [h] - Number of working hours : 2962 [h] EQUIPMENT - CNC : FANUC 18iMB5 - Interactive programming : MAPPS - 3 colors status lamp - Type of divisor : 4e-5e axe intégré * manufacturer : NIKKEN * model : 5AX-130-FA - Coolant tank * with high-pressure pump : 15 [bars] * with paper filtering unit - Coolant through spindle - Chips conveyor - Spindle cooling unit - Tool probe : OMRON - Workpiece probe : RENISHAW - Electric transformer - Electronic handwheel

Condition: ready for operation (used), Year of construction: 2002, Control Unit Brand FANUC Model na Main Drive Spindle speed range 8000 Number of axis 4 Workpiece Workpiece X 800 mm Workpiece Y 500 mm Workpiece Z 700 mm This 4-axis MORI SEIKI MCV 500 was manufactured in 2002. It features a working area of 800 × 500 × 700 mm, a Neuroma THS 350 H table with pneumatic tailstock, and a tool magazine capable of holding 20 tools with an ISO 40 taper. The spindle operates at 8,000 rpm. If you are looking to get high quality milling capabilities consider the MORI SEIKI MCV 500 machine we have for sale. Contact us for more information. Application Types Gjdpfx Agexd H S Ss Njkc Milling

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 850 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: FANUC, controller model: FS-31IA (MAPPS III), workpiece length (max.): 1,000 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 500 kg, total height: 3,138 mm, total length: 2,725 mm, total width: 4,610 mm, overall weight: 12,900 kg, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 120, tool length: 500 mm, CNC controller: FS-31IA (MAPPS III) Axes X-axis travel mm: 730 Y-axis travel mm: 730 Z-axis travel mm: 850 Rapid traverse m/min: 50 B-axis degrees: 360º (1º) Distance spindle nose - table surface mm: 100 – 830 Acceleration in the axes m/s2: 9.8 (X), 10.8 (Y), 6.9 (Z) Worktable Number of pallets: 2 Table dimensions mm: 500X500 Maximum workpiece size (D x H) mm: 800 X 1000 Max. workpiece weight kg: 500 APC time s: 7 Spindle Spindle speed rpm: 14.000 Gsdpfx Aevw Sc Tjg Nokc Spindle drive power kW: 22/18.5 Tool holder: No.40 Spindle torque Nm: 220 Tool system Tool holder: BT-40 Tool magazine slots: 120 With free neighboring places mm: 140 With occupied neighboring places mm: 70 Max. Tool Length mm: 500 Max tool weight kg: 12 Tool-to-tool time s: 0,9 Chip-to-chip time s: 3,3 Equipment Chip conveyor Workarea light CE conformity Coolant gun TOOL LIFE MANAGEMENT Cooling Tank capacity: 680 Machine running times Rated power kVA: 49 Basic machine dimensions / weight Length mm: 2.725 Width mm: 4.610 Height mm: 3.138 Weight kg: 12.900

Year of construction: 1996, condition: ready for operation (used), Control Unit Brand FANUC Model na Main Drive Number of axis 2 Tools Number of index 12 Gkjdpfx Ajxd H Tpeg Nsc This DMG Mori Seiki 150 SL was manufactured in 1996. A horizontal turning machine featuring a turning diameter of 150 mm, swing over saddle of 430 mm, and distance between centers ranging from 180 to 500 mm. It comes equipped with 12 tools. Consider the opportunity to buy this DMG Mori Seiki 150 SL horizontal turning machine. Contact us for more information. Application Types Turning