Used Moulding for sale (1,976)

Condition: excellent (used), Year of construction: 2003, operating hours: 20,092 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 20092 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 Godogrzh Espfx Ag Nekc 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: good (used), Year of construction: 2007, Ref. no.: 18588 Hersteller: BATTENFELD Type: EM 30/55 Unilog B6 Run hours: 3.200 Year of construction: 2007 Clamping unit Clamping force: 30 ton Distance between tie bars: 300 x 300 mm Mould height min.: 150 mm Mould height max.: 330 mm Opening width: 580 mm Platen size (h x v): 450 x 450 mm Gedpfx Aexdk Auog Njkc Injection unit Screw diameter: 18 mm Injection volume: 19 cm³ Shot weight: 17,5 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,5 x 1,1 x 1,9 m Machine weight: 2700 kg

Year of construction: 2017, operating hours: 5,900 h, condition: ready for operation (used), Additional Equipment Polycarbonate Viewing Window Injection Unit with Protective Guard and Sliding Guard Advanced Material Package Gkedpfxoxcb Rae Ag Nec This Engel Victory 750 / 220 spex was manufactured in 2017. It features a hydraulic movable clamping plate, advanced material package for processing thermoplastics, and a bi-metal cylinder resistant to abrasion and corrosion. The machine includes a CC300 microcomputer with a 21.5-inch full HD touchscreen for intuitive control and a user authorization system. Ideal for detailed thermoplastic processing. Contact us for more information about this machine. Application Types Injection Moulding

Condition: good (used), Year of construction: 2000, operating hours: 69,000 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 70 mm, For sale is an Engel injection moulding machine, type ERC 43/1-EA, including robotic handling. The machine is in good condition and ready for immediate operation. The machine is currently in operation and can be inspected on site. Professional dismantling and loading included. Technical data: Year of manufacture: 2000 Operating hours: 69,000 - Clamping unit: Clamping force: 3,000 kN Platen size: stationary 1,050x980 mm, moving 1,050x900 mm Min. mould installation height: 350 mm Max. platen distance: 1,200 mm 2 core pulls 2 air valves Centre ring diameter: 160 mm - Injection unit: Screw diameter: 70 mm Max. shot volume: 1,155 cm³ Specific injection pressure: 1,779 bar Temperature release up to 500°C - Handling: X: 500 mm Y: 800 mm Z: 1,880 mm C-axis: 0-90° pneumatic 2 suction/gripper circuits Freely programmable I/Os Gkedpfjxc D Dcox Ag Nsc Conveyor belt 4,000 x 600 mm, height-adjustable Predefined program sequences, sprue separation, quality part placement Transport and loading can be organised Europe-wide at extra cost upon request. Prices are exclusive of VAT. Inspection is possible by appointment. Contact us—our team will be happy to assist you. Part exchange or trade-in possible! Machinery Purchase/Sale BUY / SELL PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your machine? For further information or to contact us, please visit our website.

Year of construction: 2013, condition: ready for operation (used), Clamping force: 3200kN, screw diameter: 45mm, max. installation height: 800mm, tie bar distance: 720mm, core pulls: 1, control: Selogica, operating hours: 72520h, cycles: approx. 28 million. Documentation available. An on-site inspection is possible. Godpfx Aoxfvhleg Nskc

Condition: repair required (used), Injection moulding machine, Engel ES 330/85, Used machine Overall dimensions :3100 x 1950 x 2600 mm Weight: 5500 kg Gjdpfsukn S Hjx Ag Nskc Manufacturer: Engel Type: ES 330/85 Year of manufacture: 1997 Electrical data: 380V, 60 A, Contoller cards: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Condition: new, Year of construction: 2025, functionality: fully functional, clamping force: 6 kN, screw diameter: 14 mm, injection pressure: 2,023 bar, total length: 1,200 mm, total width: 743 mm, total height: 690 mm, overall weight: 315 kg, power: 4.1 kW (5.57 HP), input voltage: 400 V, warranty duration: 24 months, Equipment: documentation/manual, BOY XXS SP14 (ø14 mm Screw) Gkjdswi Hgispfx Ag Njc Discover precision and performance with the BOY XXS SP14, equipped with a ø14 mm screw. Ideal for high-accuracy applications in compact production environments. Included Features: - 4 freely programmable inputs and outputs for maximum flexibility - EU67 interface for seamless robot integration - Comprehensive interface package including Network/Ethernet FTP, VNC, OPC-UA, EM77, and EM82 – license fee included - Mobile machine table with practical drawer for easy access and organization - Durable packaging in a heat-treated wooden crate, ensuring safe and compliant transport - Machines have never been unpacked and have 0 operating hours - Full Warranty is included NOTE: If interested there are two available machines of this kind (new and unpacked) Reason for selling: Purchased for a project that was cancelled. Sold and delivered by Earfab ApS. (DK) Prices are excluding VAT. and Taxes

Condition: used, Year of construction: 2004, operating hours: 78,000 h, 1.0 pc. used injection moulding machine with robot Manufacturer: DEMAG Model: SYSTEM 650/1000-5200 Year of manufacture: 2004 Clamping force: 650 tons Tie bar distance: 1,000 x 900 mm Screw diameter: 95 mm Shot volume: 2,835 ccm³ Shot weight: 2,560 g/PS Control: NC 4 Gsdpsxauycefx Ag Njkc Equipment: - Robot manufacturer: DEMAG, model: DR633-1131 S3, year 2004 - 4 core pulls

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,871 h, General Data Measurements width 2500 mm Measurements depth 8500 mm Measurements height 2500 mm Machine weight 20000 kg Injection Unit Screw diameter 40 mm Injection pressure 2400 bar Screw speed 300 r/min Adjustable heating zones 5 Nozzle pressure 68 kN Clamping Unit Clamping force 7000 kN Opening stroke 1250 mm Gkodpjxf N I Eefx Ag Nsc Max open daylight 1700 mm Mould height min 450 mm Mould height max 1150 mm Ejector stroke 300 mm Ejector force for / back 180 kN This Engel E-Duo 740H-740L-700 combi was manufactured in 2017. A robust hydraulic injection moulding machine, it features a system size of 8.5 m x 2.5 m x 2.5 m and a total weight of approximately 20,000 kg. It includes dual 3-zone screws and 32 hot runner control circuits. Consider the opportunity to buy this Engel E-Duo 740H-740L-700 combi. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Year of construction: 2004, Ref. no.: 18255 Hersteller: ENGEL Type: Victory 750 / 180 tech Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Gsdpfx Agowm Iz Nj Nskc Robot Producer: Wittman Type: W743 Year: 2009

Condition: good (used), Manufacturer: Arburg Year of manufacture: 1999 Operating hours: h Machine number: 178930 Type / Model: 270C-300-100 Clamping force: 30 t Min. mold installation height: 225 mm Max. opening stroke: 325 mm Max. platen distance: 500 mm Clear tie-bar distance: 270 x 270 mm Platen size: 400 x 400 mm Screw diameter: mm Max. dosing volume: 90 cm³ Shot weight PS: 80 g Holding force: 31 kN Connection: 25 kW Accessories/equipment: 1 core puller Condition: good Weight: 1.8 t Gkedpfx Agjxf Dxrs Nec Dimensions: 3,700 x 1,700 x 1,800 mm

Condition: good (used), Year of construction: 2009, operating hours: 80,000 h, functionality: fully functional, clamping force: 1,800 kN, screw diameter: 24 mm, clearance between the columns: 520 mm, injection pressure: 1,950 bar, injection weight: 220 g, mold height (min.): 250 mm, ejector force: 37 N, plate length: 760 mm, plate width: 775 mm, total length: 5,400 mm, total width: 1,400 mm, total height: 2,000 mm, overall weight: 7,200 kg, power: 27 kW (36.71 HP), Equipment: documentation/manual, - E12 - Euromap 67 - Flowmeters and plate piping - Air Valves: 2 + 2 - Screw diameter: 40 mm - Clamping force: 1,800 kN - Max. shot weight: 155 g - Injection rate: 224 cm³/s - Injection pressure: 1,950 bar Gjdpoxlf R Nsfx Ag Njkc - Injection volume: 220 cm³ - Screw speed: 420 rpm - Screw L/D ratio: 24 - Max. nozzle stroke/force: 305 / 28 mm / kN - Max. mould opening stroke: 1,060 mm - Max. mould height: 600 mm - Min. mould height: 250 mm - Max. daylight between platens: 1,060 mm - Heating zones: 4 - Platen size (h x v): 760 x 775 mm - Distance between tie-bars (h x v): 520 x 520 mm - Ejector force: 37 kN - Control: CC200 - Operating hours: 80,000 - Power: installed max.: 27 + 9.2 + 4 kW - Weight: 7,200 kg - Dimensions (L x W x H): 5,400 x 1,400 x 2,000 mm

Condition: ready for operation (used), Year of construction: 2004, operating hours: 21,000 h, functionality: fully functional, clamping force: 1,250 kN, screw diameter: 40 mm, displacement volume: 217 cm³, injection pressure: 2,377 bar, ejector stroke: 150 mm, opening stroke: 600 mm, total length: 4,480 mm, total width: 1,510 mm, total height: 2,190 mm, overall weight: 6,000 kg, power: 18.5 kW (25.15 HP), Equipment: documentation/manual, In perfect shape. Gjdpfowlhb Tox Ag Nskc

Year of construction: 2022, condition: as good as new (ex-display), This injection molding machine from Dr. Boy is in good condition. The machine is from 2022 and has few working hours. – Brand: Dr. Boy – Model: XS – Year of construction: 2022 Gksdpfx Agomf U Uvo Noc – Screw diameter: 18 mm – Shot volume: 15.3 cm³ – Closing force: 10 T – Working hours: < 25

Condition: ready for operation (used), Year of construction: 2013, Injection Unit Gsdpfx Aexgv Twjg Nokc Screw diameter 55 mm Shot weight 498 g Injection pressure 2070 bar Screw speed 220 rpm Clamping Unit Clamping force 2700 kN Opening stroke 600 mm Mould height min 200 mm Mould height max 600 mm Ejector stroke 200 mm Ejector force for / back 130 kN This WITTMANN TM Xpress 270/2250 Unilopg B6P was manufactured in 2013. It features a screw diameter of 55 mm, a maximum screw speed of 220 rpm, and a clamping force of 2700 kN. The machine offers a maximum shot weight of 498 g and an injection speed of 980.0 cm³/s. It includes a Wittmann CNC 8 control for enhanced operation. Contact us for more information about this machine. Application Types Injection Moulding

Condition: good (used), Year of construction: 2001, Ref. no.: 18587 Gedpfx Agjw Hc Spe Nekc Hersteller: FERROMATIK MILACRON Type: K-200 S Year of construction: 2001 Clamping unit Clamping force: 200 ton Opening stroke: 750 mm Distance between tie bars: 560 x 560 mm Mould height min.: 300 mm Opening width: 1050 mm Platen size (h x v): 830 x 830 mm Injection unit Screw diameter: 50 mm Injection volume: 416 cm³ Shot weight: 375 g Measurements and weight Dimensions: 6,9 x 2,0 x 2,6 m Machine weight: 13000 kg

Year of construction: 1980, condition: good (used), Stellite forming machine VOLLMER GF10U Blade thickness 1 to 4mm Width band saw blades 60 to 420 mm circular saw blades 300 to 1.200 mm Ø Gsdpfxsgxb Ebe Ag Nskc electric feed drive via gear motor

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 1240 mm Measurements depth 4530 mm Measurements height 1910 mm Machine weight 3500 kg Injection Unit Screw diameter 32 / 36 / 40 mm Stroke volume 121 / 153 / 188 cm³ Injection pressure 218 / 173 / 140 MPa Screw speed 0–230 r/min Clamping Unit Clamping force 900 kN Opening stroke 320 mm Max open daylight 700 mm Ejector stroke 100 mm Ejector force for / back 33 kN Media Oil tank 190 L Gedpfxjwvwchj Ag Njkc This HAITIAN MA900 II eco was manufactured in 2016. It is a hydraulic injection moulding machine with a clamping force of 900kN and a shot volume of 153 cm3. Consider the opportunity to buy this HAITIAN MA900 II eco hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2005, operating hours: 92,980 h, condition: ready for operation (used), This Engel Victory 750/200 Tech hydraulic injection moulding machine was manufactured in 2005. Consider the opportunity to buy this Engel Victory 750/200 Tech hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding Gkedpfxexd H R Ue Ag Noc

Year of construction: 2016, condition: ready for operation (used), This MAPLAN MFT 750/160 edition S was manufactured in 2016. It is a vertical injection moulding machine, ideal for precision plastic processing. Contact us for more information. Application Types Injection Moulding Gksdpfxow Tfice Ag Noc

Year of construction: 2012, condition: ready for operation (used), This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information. Gkedpoxmbwbofx Ag Njc Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 1850 Measurements depth 5800 mm Measurements height 2200 mm Machine weight 9400 kg Injection Unit Screw diameter 45 / 48 / 50 mm Shot weight 229 / 289 / 357 g Stroke volume 286 / 318 / 393 cm³ Injection pressure 2494 / 1970 / 1878 bar Screw speed 270 rpm Clamping Unit Clamping force 1800 kN Opening stroke 540 mm Max open daylight 1230 mm Mould height min 300 mm Mould height max 790 mm Ejector stroke 200 mm Ejector force for / back 49 kN Gkjdexl H E Uspfx Ag Noc This FERROMATIK ELEKTRA 180 was manufactured in 2007. It features a screw diameter of 45-50 mm, injection pressures up to 2494 bar, and a clamping force of 1800 kN. The machine dimensions are 5.8 × 1.85 × 2.2 m, and it has a total connected load of 33.8 kW. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK ELEKTRA 180 machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 2020, condition: ready for operation (used), General Data Machine weight 28400 kg Additional Equipment Gksdoxb E I Tjpfx Ag Nsc The robot + auto line are not included. These PIOVAN accessories are included: Piovan Hot Air Dryer G35 / Piovan Suction Unit PF30 / 3x Piovan Temp Unit THW118-F (+1x brand new unused temperature unit) This Arburg Allrounder 920H 5000-4600 was manufactured in 2020. A robust plastic processing machine featuring a clamping force of 5000 kN and an injection unit of 4600. It has a significant opening stroke of 900 mm and mold platens size of 1280 x 1280 mm. Consider the opportunity to buy this Arburg Allrounder 920H 5000-4600 plastic processing machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,674 h, Control Unit Model CC300 microcomputer Gkedpfx Ajw Rg Tqsg Noc Brand ENGEL Injection Unit Screw diameter 45mm Clamping Unit Clamping force 500 tons Additional Equipment Tool heating: 32 control circuits, max. heating output 60 kW Vacuum compressed air circuits: With Venturi nozzle and pressure switch Solenoid air valves: 2/2-way, R1/2 inch Autoprotect injection monitoring: Self-learning system for mold protection Advanced material package: For thermoplastics up to 350°C, max. reinforcement level 30% This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5" full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2024, General Data Measurements width 1095 mm Measurements depth 3033-3448 mm Measurements height 2010 mm Machine weight 3030 kg Clamping Unit Gkodpfxjwvwbws Ag Nsc Clamping force 500 kN Opening stroke 400 mm Distance between bars 360 x 335 mm Mould height min 250 mm Ejector stroke 80 mm Ejector force for / back 20.4 kN / 13 kN Media Oil tank 200 liters Additional Equipment Screw diameter 32mm (SP 82)/ Clear width between tie bars 360mmx335 (hxv) /Maximum ejector stroke 80 mm/ Maximum injection weight PS 69.5/ Minimum mould height 250 mm /Maximum special injection pressure 1076 This BOY 50 E hydraulic injection moulding machine was manufactured in 2024. It features a maximum clamping force of 500 kN, a maximum opening stroke of 400 mm, and a total installed power of 16.8 kW. The machine dimensions are compact, with a length of up to 3448 mm and a width of 1095 mm. Consider the opportunity to buy this BOY 50 E hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding