Spindle moulder

SCHNEIDER SK 2/4 II

Condition: used, Year of construction: 1986, Table milling machine Manufacturer: Schneider Type: SK2/4 II Year of manufacture: 1986 Gkedpfozuyxaox Al Soc Technical data - 3,000 - 10,000 rpm - Runs in both directions (left/right) - with Haffner feed unit - including accessories Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm Gedpfeh Nvyzox Al Sskc -Weight: 962 kg

Condition: not inspected (used), Power connection 380V 5.5kW, right/left rotation, two electronically controlled speeds, spindle diameter 30 mm, spindle height adjustment via handwheel 180 mm, spindle not tiltable, 6 speeds: 3000/4000/5000/6000/8000/10000 rpm, dimensions (W x D x H): 1200 x 1200 x 1100 mm, weight approx. 1000 kg, complete with tenoning device / sliding table Gkjdoxqp Ngepfx Al Ssc

Condition: used, Year of construction: 2000, With electric height and tilt adjustment Used, excellent condition, little used Make Altendorf Type F45 Year of manufacture 2000 Machine number GS-tested Motor 4 kW Steel guides Carriage length approx. 3000 mm Cutting width approx. 1050 mm Pivoting up to 45° Prepared for scoring unit Parallelogram guard Tabletop extension Anodized aluminum parts Electric height adjustment Electric tilt adjustment Digital display: - Cutting angle - Speed Extraction connection D 120/80 mm Space required approx. 3010 mm x 1800 mm x 1500 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on load, unpacked Gsdjvxlq Hopfx Al Sskc Sold in the current condition as seen, without warranty or guarantee

Condition: good (used), Year of construction: 2017, - Milling spindle swivel range: 90 degrees / 45 degrees Godpfxsy Tm Rpo Al Sekc - Spare milling spindle: included

Condition: used, machine/vehicle number: 1210A15, mileage: 29,049 km, power: 96 kW (130.52 HP), first registration: 01/1984, fuel type: diesel, overall weight: 7,490 kg, color: blue, gearing type: mechanical, Equipment: all wheel drive, parking heater, trailer coupling, TUV and AU are made NEW!!! KFZVersicherung 270, -Euro per year!!! KFZ is differential taxed VAT not showable. The Magirus is in a good and very well maintained condition directly from the THW only a few months out of service, and equipped with: double cab with 9 to 11 seats roller shutter body with shelves and drawers, four-wheel drive, rear axle lock, several other Magirus / Iveco vehicles are still in my offer e my vehicles are with data and prices on my homepage r info??? Call 0049 (0) 2248 le Gru?e Your Philipp from the Hanfbachtal Gedpfx Aeqx Sv Asl Sskc

Condition: good (used), Table milling machine, table milling machine -Table milling machine: with rigid spindle -Speeds: rpm Gedpfx Aocl Svvel Sekc -Motor power: kW -Dimensions: 1000/1870/H1040 mm -Weight: 560 kg

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine operated via handwheel and worm gear (rear) Gksdpfx Aoi Dfidsl Sec Tilting Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees when tilted: 140 mm The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Machine weight: approx. 250 kg Location: Available from stock in 54634 Bitburg - immediately available -

Year of construction: 1962, condition: good (used), machine/vehicle number: 1083, Broaching Machine - Vertical Manufacturer: Rausch Type: RS10/915 Machine number: 1083 Godpfxjfc T Eue Al Sjkc Year of manufacturing: 1962 Force: 10 Tons Stroke: 915 mm System DIN 1415 With pedestal for upper-floor positioning

Condition: used, Year of construction: 1982, From business liquidation: Ulmia 1710S Year of manufacture: 1982 Mitre cuts up to 45° Maximum cutting height at 90°: 75mm – at 45°: 50mm Gkedsxq N T Espfx Al Sec Saw blade: 250mm Table size: 630x500mm 380 Volt Cutting width to the right of the saw blade: 650mm The machine is operational, but shows heavy signs of use!