Used Moving Blades for sale (7,409)

Condition: excellent (used), for grinding saw blade diameters from 30 up to max. 300 mm Grinding wheel diameter 150 mm, Isdpfxez Dwmqj Acpetn lots of accessories good, well-maintained condition Operating manual is available

Condition: like new (used), 2 unused blades for guillotine shear Iodez Aybkepfx Acpjtn to standard quality → sold as used. Length = 3150 mm Width 1 = 66.5 mm Width 2 = 68.5 mm Thickness = 19 mm Through holes, D = 10 mm All further data can be found in the attached drawing.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2026, total length: 14,040 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, wheelbase: 9,060 mm, color: silver, Year of construction: 2026, More information: Mark van der Steen = Further information = Axle configuration Ijdpjz Av Tpofx Acpetn Axle brand: BPW Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Unladen weight: 8,170 kg Payload: 33,830 kg GVW: 42,000 kg Maintenance APK (technical inspection): valid until 01/2027 Identification Registration number: OX-13-BL Further information Please contact Mark van der Steen for more information.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2023, total length: 13,600 mm, total width: 2,550 mm, total height: 3,700 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 8,910 mm, color: white, Year of construction: 2023, Equipment: ABS, Axle Configuration Tire Size: 385/65R22.5 Axle Brand: SAF Brakes: Disc brakes Suspension: Air suspension Itjdpjzzyqisfx Acpsn Rear Axle 1: Max. axle load: 9000 kg; Tire tread depth left: 40%; Tire tread depth right: 40% Rear Axle 2: Max. axle load: 9000 kg; Tire tread depth left: 80%; Tire tread depth right: 80% Rear Axle 3: Lift axle; Max. axle load: 9000 kg; Tire tread depth left: 90%; Tire tread depth right: 90% Weights Unladen weight: 6,100 kg Payload: 37,900 kg GVWR (Gross Vehicle Weight Rating): 44,000 kg Maintenance, History, and Condition APK (Technical Inspection): valid until 09/2027 Technical condition: very good Optical condition: very good Identification License plate: OT-92-ZZ Additional Information Please contact Mark van der Steen for further information.

Condition: used, Max. saw blade diameter: 800mm, feed speeds: 3, max. feed 80teeth/min, motors: 2. With dressing device and coolant system. All motor cables and switch connectors were replaced. The machine was completely dismantled, cleaned and workshop-overhauled. Documentation available. Inspection possible by appointment. Itedpfx Aoz A Ekbecpen

Condition: used, functionality: fully functional, Pinheiro AMA2 310 multi-blade crawler saw Track width: 310 mm Cutting width: 305 mm Cutting height: 95 mm Blade size: 250-350 mm Feed rate: 7-45 m/min Total power: 24.6 kW Ijdpoycvy Rofx Acpotn

Condition: new, Cutting height 175 - 210 mm Motor output 15 kW cutting width 620 mm Itsdpfjz St Saex Acpsn Cutting length 5200 mm Dimensions (L/W/H) 7000 x 1470 x 850 mm

Condition: new, axle configuration: 3 axles, suspension: air, tire size: 385/65R22,5, color: white, Equipment: ABS, = Additional Options and Accessories = - Electronic Braking System (EBS) - Rear doors - Air suspension Itodpfxoz R N U Ns Acpon = Notes = Fully equipped: - Remote control - Small turret in the front panel - Smartboard - 6x round tail lights - Powersheet automatic tarpaulin For more information, contact Mark van der Steen. = Additional Information = General Information Year of manufacture: 2026 Design year: 2026 Axle Configuration Tire size: 385/65R22.5 Axle brand: SAF CD Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire tread left: 100%; Tire tread right: 100% Rear axle 2: Tire tread left: 100%; Tire tread right: 100% Rear axle 3: Lift axle; Tire tread left: 100%; Tire tread right: 97% Weights Unladen weight: 6,950 kg Payload: 38,050 kg GVW: 45,000 kg Additional Information Please contact Mark van der Steen for further information.

Condition: new, Cutting height 175 mm Motor output 15 kW cutting width 620 mm Cutting length 5200 mm Iedpfsz St R Aox Acpstn Dimensions (L/W/H) 7000 x 1470 x 850 mm

Condition: used, Arbor for Oerlikon Spiromatic, bevel gear milling machines. Itsdpjz H Nvvjfx Acpen

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2017, total length: 14,040 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65, wheelbase: 9,060 mm, color: silver, Year of construction: 2017, Axle configuration Tyre size: 385/65 Axle brand: Valx Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 40%; Tyre tread right: 40% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Iedpfxex Uqr Ho Acpstn Weights Unladen weight: 7,880 kg Payload: 34,120 kg Gross vehicle weight: 42,000 kg Condition Damage: none Identification Registration number: OP-86-ZN Further information Please contact Bob Beukers for more information.

Condition: good (used), Code: 0297 Brand: COSMEC Model: SM 100 Automatic multi blade saw for wooden boards, sawmills, carpentry workshops, wooden window frames and various Technical data: Conveyor belt width 250 mm Max cutting height 100 mm Min/max sawblade diameter mm 250/300 Hole 60 Motor 20 Hp Blade feed speed 5/30 mt/min Feed motor 1 Hp Non-return protections Conveyor belt lubrication pump Weight kg 1200 Itedpfx Ajyi Aaqecpen

Year of construction: 1997, condition: excellent (used), A used, very well-maintained cold circular saw from EISELE, equipped with a 370mm circular saw blade, steplessly adjustable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Speed: 17/34 rpm Cutting range: Round 90°/45° right/left/30° right: 130/130/105mm Square 90°/45° right/left/30° right: 120x120/100x100/90x90mm Ijdpjkfp D Tsfx Acpjtn Rectangle 90°/45° right/left/30° right: 200x100/140x100/100/100mm Pneumatic connection: 7 bar Working height: 900mm Machine dimensions (W x D x H): 865x1332x2175mm Weight: 460kg Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Condition: used, Year of construction: 2002, Brand and Model: SORALUCE SP-5000 Type: Traveling column Cnc: Heindehain 426 Year: 2002 Octagonal Head Indexed Degree-by- Degree Vertical course 1.600 mm Cross course 1.200 mm Longitudinal course 3.500 mm Width of the T slots: 22 mm Weight máximum carrying load on table: 3.000 kg/ m² Motor power : 30 kw Taper : DIN-69871 -AD Speed range : 4.000 r/min Range of maximum working feeds: 5.000 mm/min Total machine width : 1.560 mm Quick course vertical axis: 15.000 mm/min Ijdpfx Aez Ekdrocpotn Quick course cross axis: 15.000 mm/min Quick course longitudinal axis: 15.000 mm/min Maximum thrust from the spindle to the cutting tool: 11.000 N Internal cooling Machine equipped with a HIGH SPEED HEAD

Condition: used, machine/vehicle number: WFDFLT33903000213, empty load weight: 7,287 kg, maximum load weight: 27,713 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2023, loading space length: 13,550 mm, loading space width: 2,470 mm, loading space height: 2,793 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 R22,5", color: green, Please note: archive images! Vehicle may currently be in use! #Chassis – haulage semi-trailer - Fine-grain steel welded construction, lightweight design up to the landing legs - Fifth-wheel plate with replaceable 2" kingpin - Preparation for lashing eyes in the floor at the sides - 24 t 2-speed landing gear, one-side operation, with straight lower section - Pull-out ladder at rear - Side-mounted door stays - Wheel chocks with holder - Aluminium side underrun protection - Steel rear underrun protection with wide Fliegl mudflaps - Quarter-shell mudguards - Rear ram protection (corner protection) - Aluminium ladder 3300 mm, with side-mounted holder - Tarpaulin pole with holder - Plastic toolbox with drawer and shelf, W=650 / H=520 / D=670 mm #Axles + suspension - SAF disc brake axles with 430 mm disc diameter, air suspension - 1st axle: automatic lift axle incl. forced lowering and traction help, actuation "3x braking" #Braking system - Dual-line air brake system, spring brake parking brake - 2 non-interchangeable coupling heads at front - EBS (electronic braking system) with EBS socket at front - Raise & lower valve - Vehicle stability system #Wheels and tyres - 385/55 R22.5", make at manufacturer's choice - Steel rims, factory silver #Electrics - 24 Volt, multi-chamber lamps - Yellow LED side lighting - 2 white front position lights - 2 white/red rear outline marker lights - 2 x 7-pin non-interchangeable sockets at front Ijdjz Ti A Dspfx Acpstn #Moving floor – hydraulics - Hydraulic cylinders with sliding mechanism installed in the floor - Dual-circuit hydraulics - Forward/reverse switching and on/off electrically via radio remote control - Drive system make Keith Runningfloor - Moving floor power supply via sidelights - Hydraulic operation via truck PTO - Hydraulic connection with hose at front wall and screw-type plug of high-pressure rotary coupling NB = 48 mm - Note: dual-circuit hydraulic system required! - Recommended pump output: max. 223 ltr/min (180 ltr/min recommended) - Pressure: max. 210 bar - Oil tank capacity: min. 200 ltr #Moving floor – floor - Moving floor with rear wear plate, Running Floor - Aluminium floor slats, 6 mm floor profile, ribbed design - Prepared for retrofitting a floor protection sheet #Moving floor – body - Aluminium box body made of high-quality, abrasion-resistant material - Front and side walls of aluminium hollow profiles, welded all round at the top to a wide special aluminium reinforcement profile, welded into a special frame at the bottom - Moving inner bulkhead (travels with the floor) for better unloading - Reinforced tarpaulin flaps at bottom - Hydraulic rear wall with large upward opening, robust design, with radio remote control, operable only with roof open - Standing platform with ladder access on both sides (left/right in direction of travel) and railing, for opening and closing the roll-up roof tarpaulin - Removable, swivelling cross bows for tarpaulin support + tarpaulin support at front on front wall and at rear on rear wall - Hydraulic roof with tarpaulin, operable via radio remote control #Registration / plates - Germany - With Dekra inspection and expert report Please note: archive images!

Condition: excellent (used), Year of construction: 2023, roll diameter: 85 mm, total width: 800 mm, total height: 650 mm, total length: 1,200 mm, empty load weight: 150 kg, Load moving system CS Skates - ET6 MACH-ID 7822 Make: CS Skates Type: ET6 Year: 2023 Steering skate length:600mm Steering skate width:530mm Iodpfszcvbzex Acpetn Steering skate hight:110mm Skate length: 270mm Skate width: 220mm Skate hight: 110mm Max. loading capacity:3 + 6T Number of wheels: 16 Wheel Ø: 85mm Wheel material: Hard Nylon Hydraulic jacks: 2 Lifting capacity: 10T Lifting range of foot:30-260mm Lifting range of head:420-650mm Length: 1200mm Width: 800mm Height: 650mm Weight: 150kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Bandsa for re-sawing blocks and planks type Canali multiline ML 1100 with 3 band saw units Itedpfx Ajz Hbh Decpon Sawpully, width 105 mm, max width of saw blade 120 mm. Speed of the bandsaw blade 28/32/36/42 m/sec Feed-work has below measurements. - Height of feed rollers 200 mm - Diameter of feed rollers 100 mm - Max opening saw blade to anvil side 230 mm - Max opening saw blade to pressure side 230 mm - Max opening Center cut 460 mm

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (available by phone at ). Itedpfoynrhuex Acpon Holp CutWheel / CW.099.110 / incl. MS08 mount / HARDOX / NEW / in stock & immediately available Price: 14,770.00 € net / 17,576.30 € gross - Excavators from / to: 7 – 11 t - Own weight approx.: 490 kg - Cutting diameter in cutting direction: 3 – 50 mm - Cutting diameter in sawing direction: 50 – 170 mm - Cutting width: 1,000 mm - Cutting height above ground: 100 mm - Oil flow rate: 50 – 60 l/min - Hydraulic pressure: 180 – 200 bar - Recommended blade speed: 100 – 120 rpm Advantages of the Holp CutWheel: - Clean cut of all types of wood due to adjustable counter blade - Significantly more economical operation, as less manpower and machinery are required while maintaining a high level of work safety - 3 working steps in one: cutting (3 mm to 50 mm), sawing (50 mm to 170 mm) and gathering the cut material - Working at heights up to 8.5 meters with a 10-tonne excavator and up to 10 meters with a 15-tonne excavator - Cutting wheel operates in two directions and easily processes diameters from 3 mm to 17 cm - High robustness (cutting wheel made of fine-grain steel) - Cutting and sawing direction as well as diameter can be adjusted from the cab, so that the work does not have to be interrupted. This also ensures greater work safety - Significant savings due to the fact that the CutWheel replaces a lifting platform on the excavator – in this way, the CutWheel replaces various machines and even manual labor - The robust construction also allows the material lying on the ground to be pushed together as if with a broom - Since the CutWheel does not saw, but "crushes" the wood in both cutting directions, the wood fibers are not torn open as with a conventional saw blade. This creates a smooth cut, which prevents fungal infestation - Three hydraulic connections are required: Working line, double-acting, for cutting/sawing blades 1 x leak oil line We have many other Holp products in our warehouse that are immediately available! Mr. Herden (Tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale are subject to change! New: Yes Empty weight: 490 kg Part suitable for: Application forestry Please contact...

Condition: ready for operation (used), Bratstvo Lignum sharpening and grinding machine for sawmill blades. The machine is complete and in working technical condition. It can be additionally equipped with rollers for holding band saw blades. Iodpfx Aoxx Uxiecpotn

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (tel. ). Holp CutWheel / CW.149.140 / incl. MS10 mounting / HARDOX / NEW / in stock & immediately available Price: 19,160.00 € net / 22,800.40 € gross - Excavators from / to: 12 – 17 t - Weight approx.: 670 kg - Cutting diameter in cutting direction: 3 – 50 mm - Cutting diameter in sawing direction: 50 – 200 mm - Cutting width: 1,360 mm - Cutting height above ground: 150 mm Itodpfx Acjynrhzepen - Oil flow: 100 – 110 l/min - Hydraulic pressure: 180 – 200 bar - Recommended blade speed: 80 – 100 RPM Advantages of the Holp CutWheel: - Clean cut of all types of wood thanks to an adjustable counter blade - Significantly more economical operation, as less manpower and fewer machines are required, while maintaining a high level of work safety - 3 work steps in one: cutting (3 mm to 50 mm), sawing (50 mm to 200 mm) and gathering the cut material - Working at heights of up to 8.5 meters with a 10-ton excavator and up to 10 meters with a 15-ton excavator - Cutting wheel operates in two directions and easily processes diameters from 3 mm to 20 cm - High robustness (cutting wheel made of fine-grain steel) - Cutting and sawing direction as well as diameter can be adjusted from the cabin, so that the work does not have to be interrupted. This also ensures greater work safety - Significant savings due to the fact that the CutWheel replaces a lift on the excavator – in this way, the CutWheel replaces various machines and even manual labor - The robust construction also allows for pushing the material lying on the ground together as if with a broom - Since the CutWheel does not saw but "squeezes" the wood in both cutting directions, the wood fibers are not torn as with a conventional saw blade. This creates a smooth cut, which prevents fungal infestation - Three hydraulic connections are required: Working line, double-acting, for cutting/sawing with saw blades 1 x leak oil We have many more Holp products in our warehouse that are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale excepted! New: Yes Unladen weight: 670 kg Part suitable for: Intended use Forestry Please contact...

Condition: new, Year of construction: 2026, functionality: fully functional, grinding wheel diameter: 200 mm, grinding spindle motor power: 4,000 W, Saw blade grinding machine "Schmidt Tempo ECT 502 Retro" suitable for: - HSS and carbide saw blades up to 520 mm in diameter and 8 mm thick - completely overhauled mechanics and additional drive for automatic chip angle adjustment. Iodpez Dhbfjfx Acpjtn - modern, mandatory safety devices - new control system, new software - operable via touchscreen display - 4 kW grinding wheel drive motor in combination with a frequency inverter for variable cutting speeds of 24-60 m/sec. - definable grinding speed, 3 profiles - automatic chip angle adjustment / swivel angle - Autopos 4 - latest generation - adjustable via machine menu - freely definable special teeth, graphical control - remote maintenance and updates possible - extensive diagnostics and machine data menus - ...and many other features and functions - optionally with coolant system and necessary accessories

Condition: used, table length 605 mm table width 250 mm weight ca. 40.0 kg Current list price: approx. 3.000 euros Isdpfx Aszzrf Eocpotn Special price available upon request Features - Sturdy / solid cross table - From an ALZMETALL column drill press - Machined clamping surface: 605 x 250 mm - Maximum travel: 600 mm - Adjustment range: 0.05 mm

Condition: new, functionality: fully functional, The professional multi-purpose saw WP 500 is designed for efficient and precise wood cutting in sawmills and woodworking shops. Its single-shaft design ensures stable operation, high efficiency, and reliability even under intensive use. The machine is equipped with an automatic motor load control system, which increases operational safety and optimizes cutting performance. Technical specifications: Type: Single-shaft multi-purpose saw Main machine power: 75–100 kW Feed motor power: 1 × 3 kW Maximum dimensions of the cut material: 200 × 500 mm Automatic motor load control. Advantages of the machine: - High cutting performance; - Stable and durable construction; - Precision wood processing; - Automatic adjustment of work to the load; - Easy operation and maintenance; - Ideal for continuous operation in industrial plants. Application: - Wood sawing; - Production of timber and planks; - Processing of construction lumber; - Use in sawmills and production lines. Isdpfx Asz Hqikjcpotn

Condition: excellent (used), CATALOGUE NUMBER: 7949 Technical data: - track width: 380mm - arbor width: 420mm - max. blade diameter: 400mm - blade bore diameter: 80mm - max. cutting height: 120mm - table width with clearance: 1060mm - table length: 2050mm - from above: - row of pawls/feed rollers - metal sliding pressure roller - feed rollers - 2 metal sliding rollers - pressure device - arbor with saw blades - 3 metal sliding pressure rollers - from below: Iodezkuawopfx Acpjtn - guide - feed rollers - track - stepless feed speed adjustment - feed motor: 1.5kW - main motor: 30kW - central track lubrication - dust extraction port diameter: 250mm - roller tables: 2 units - I table length: 3500/800mm - II table length: 2550/800mm - roller width: 700mm - table height: 950mm - overall dimensions (L/W/H): 2950x2000x200mm - weight: approximately 3000kg Advantages: - German-made - 2 roller tables - multi-blade saw, used - very good condition Net price: 32900 PLN Net price: 7651 EUR Net price calculated according to the exchange rate of 4.30 PLN/EUR (price may be subject to change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER: 7947 Technical specifications: - track width 300mm - working width of the roller 300mm - max. blade diameter 350mm - blade bore diameter 70mm - max. cutting height 120mm - table width with extension 750mm - table length 1540mm – from above: - deflectors (barrier to prevent material from retracting) Iedpfxjzw Dw So Acpetn - sliding roller, metal - deflectors - sliding roller, metal - roller with saws - 2 smooth sliding rollers, metal – from below: - guide strip - deflectors - track - central track lubrication - stepless feed speed adjustment - feed motor 1.5kW - main motor 37kW - diameter of the extraction nozzle 200mm - overall dimensions L/W/H 1800x1550x1500mm - weight approximately 1700kg Advantages: - Italian made - very good condition - DTR documentation - used multi-blade saw Net price: 33900 PLN Net price: 7884 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)