Used Mvh 5 1 4 B for sale (65,199)

Condition: ready for operation (used), Indramat 112A-0-ZD-4-C / 130-B-0 / WI572LV / S005 permanent three-phase servo motor + Heidenhain Rod 1424.003-600 Rod encoder. 250 040 12, serial number as per photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Gkodpji D Ipqjfx Ag Njc

Condition: excellent (used), axle configuration: 3 axles, wheelbase: 7,470 mm, loading space length: 10,700 mm, loading space width: 2,550 mm, loading space height: 3,800 mm, loading space volume: 37 m³, first registration: 12/2007, suspension: air, tire size: 385/65 R22,5, Year of construction: 2007, Equipment: ABS, = Additional Options and Accessories = - ADR - EBS - Lift axle - Alloy wheels - Air suspension - Disc brakes = Remarks = Well-maintained INDOX tank trailer, year of manufacture 11/2007, with a capacity of 37,500 l, 1 compartment with 4 anti-surge baffles. Recently renewed: 3 x SAF axles with disc brakes (INTRADISC), 1st and 2nd axle are lift axles, ADR (FL, AT), Tank code: L4BH, TE19, TU15, stainless steel tank: X6CrNiMo 17-12-2, unladen weight: 7,510 kg, max. total weight: 39,000 kg, tyres 385/65-R22.5 (L: 7/79mm; R: 5/8/9mm), Dutch registration with valid technical inspection (APK) and ADR certification until 18.10.2025. = Further Information = Axle configuration Tyre size: 385/65 R22.5 Axle brand: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy wheels; Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 45%; Tyre tread right: 35% Rear axle 2: Alloy wheels; Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 45%; Tyre tread right: 50% Rear axle 3: Alloy wheels; Max. axle load: 9,000 kg; Tyre tread left: 55%; Tyre tread right: 55% Gedpfx Agsxcup Aj Nokc Dimensions Dimensions (L x W): 1,070 x 255 cm Weights Unladen weight: 7,510 kg Payload: 31,490 kg Gross vehicle weight: 39,000 kg Functional Body manufacturer: INDOX IN3CIR Number of compartments: 1 Condition Technical condition: very good Visual condition: very good Identification Registration number: OK-83-FK More information Please contact Piet Swank for further information.

Condition: used, overall weight: 13,500 kg, maximum load weight: 8,500 kg, axle configuration: 1 axle, loading space length: 9,900 mm, loading space width: 2,400 mm, loading space height: 2,900 mm, first registration: 10/1983, total width: 2,500 mm, total height: 3,900 mm, * Kässbohrer 1 axle box trailer for 4 horses or 3 carriages with living area & cupboards * 1 large flap at the back - 1 large flap on the side - 1 small entrance door at the front plus storage compartment * Approved as a semi-trailer for animals for sporting purposes - horse transporter - * Length of loading area: 9,900 mm - Total length: 10,520 mm * Width of loading area: 2,400 mm - Total width: 2,500 mm Gjdjxglfvepfx Ag Njkc * Inside height: approx. 2,900 mm - Total height: 3,900 mm * Permissible total weight: 8,770 kg - Empty weight: 3,750 kg - Payload: 5,020 kg * Technically OK - trailer is tight and dry - something would also need to be done visually * German vehicle - German vehicle registration document - * Please make an appointment for a viewing * Contact person: Mr. Andreas Vogel * The information provided on the Internet is non-binding description. * They do not represent guaranteed properties. * The seller is not liable for typing or data transmission errors. * Subject to changes, errors and prior sale

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor, crane motor -Manufacturer: ABM Greiffenberger, gear motor 4 rpm -Engine: Type 3G225F/132 / D 80 b-4 -Power: 0.75 kW -Design: B5 -Shaft: Ø 65 x 105 mm -Protection class: IP 54/55 -Dimensions: 705/305/H400 mm Gksdpfjxamghjx Ag Njc -Weight: 106 kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, - milling head/spindle retrofit in the year 2022 for 28.000 Euro - CNC control Heidenhain iTNC530 - NC swivable milling head: B-axis full NC-axis A-axis horizontal/vertical - NC-rotary table (C-axis) - tool changer for 72 tools - chip conveyor - electronical hand wheel - coolant device (coolant through spindle device 20bar) Technische Daten / technical details: Gkedpfx Agerz I Hbe Nsc Verfahrweg X längs / X-Travel longitudinal 1200 mm Verfahrweg Y quer / Y-Travel cross 600 mm Verfahrweg Z vertikal / Z-Travel vertical 700 mm C-Achse Rundtisch / C-axis rotary table 360 ° B-Achse / B-axis +-90 ° Rundtischgröße / rotary table size 800 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 0-6300 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 72 fach Antriebsleistung Spindel 100/40%ED / drive capacity spindle 100/40%ED 17/25 kW Gewicht der Maschine ca. / weight 9000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2008, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Very good condition (!!) Current new price including accessories approx. 90.000 Euro Special price upon request Equipment: - Robust electro-hydraulic 4-roll bending machine - 4-roll concept offers a wide range of bending and rounding options - MG NC control unit "ELAP LYNX" * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Freely movable control panel - Two central rolls are directly driven by hydraulic motors - Conical rolling is possible by tilting the rolls - Parallelism of the side rolls via torsion shafts - Pre-bending on both sides - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Permanent lubrication of all components Bearings - Sturdy welded steel construction Godpfx Agoxaah Ee Nekc - 2x bending speeds selectable - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure indicator for the rollers - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: new, Indramat MAC112C-0-ED-3-C / 130-B-1 Permanent magnet motor, SN:81912 ,unused, 100% functional, scope of delivery according to photos Gkodpfx Aoi D Iqgjg Nec

Condition: used, mileage: 705,000 km, first registration: 03/1970, number of seats: 34, next inspection (TÜV): 08/2026, Year of construction: 1969, 2 Former Swiss Postal Buses Vehicle 1 Saurer L4C left-hand drive One of the last bonnet-type buses on a Saurer chassis. Bodywork by Ramseier + Jenzer. This company carried out a complete factory restoration of the vehicle in 1991. The vehicle was in the previous owner’s possession for 40 years. Exceptionally well-maintained and immediately operational. 125 HP, 4-speed gearbox with overdrive, power steering, pneumatic doors at the front and rear, length 10,005 mm, height 2,980 mm, width 2,300 mm, 33 passenger seats plus driver, 2 roof hatches, radio with microphone. Vehicle 2 Volvo chassis with Lauber body 23 passenger seats, automatic transmission, first registration 1982, converted to party bus, length 11,750 mm, 230 HP. Special package price: €99,000.00 Net export possible. We make shipment worldwide. Gedpfjxmruqox Ag Njkc

Condition: used, Year of construction: 2021, Number of spindles 5 St. Working width 250 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carrier motor-controlled - Additional motor-controlled positioning: right spindle radial and axial left spindle axial - working width 250 mm TECHNICAL DATA ----- Working width (perimeter of tools 163 mm) 15 - 230 mm Working height(perimeter of tools 163 mm) 10 - 150 mm (perimeter of tools 123 mm) 10 - 160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Gjdpfx Ajwgwmnog Njkc Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled...

Condition: used, 1 lot = 720 kg stick electrodes BÖHLER-THYSSEN Welding electrodes for manual arc welding Stored dry, supplied in 6 kg packages Type: Phoenix SH Yellow B + Phoenix Special Yellow AWS A5.1-91 Item no. 18952 Electrode diameter: Ø 5 mm Electrode length: 450 mm DIN: EN 499-E38 2 RB 12 - Rutile-basic stick electrode. - Easy welding of root passes, fill passes, and cover passes Godpexcnktofx Ag Njkc - Excellent positional welding properties - Suitable for radiographic-clean welding in pipeline, boiler, and tank construction - Can be used on shop-primer-coated plates - In unopened original packaging, warehouse stock Total weight: 720 kg

Condition: new, overall weight: 40,000 kg, empty load weight: 9,150 kg, maximum load weight: 30,850 kg, axle configuration: > 3 axles, loading space length: 9,100 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ABS, air suspension with lifting and lowering function, axle load scales, total loading platform length approx. 9,100 mm, low bed approx. 6,900 mm long, loaded loading height approx. 890 mm, 24 lashing rings each for 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing strip on the outer ramp and rear slope, laterally adjustable loading ramps, 68 mm thick wooden floor, storage box with lid for lashing chains or tension belts, contour marking as per regulations, rotating beacon, spring-loaded parking brake, incl. axle load display, vehicle hot-dip galvanized, Surcharge for: hydraulic ramp adjustment = price: €1,000, -- Printing errors, mistakes and changes reserved, sample images only --, More data at: !, More details: ! Gkjdpjxduz Iofx Ag Nsc

Condition: new, functionality: fully functional, Year of construction: 2016, Electric chain hoist with trolley, explosion-proof, type STK2008-10 1.6 4/2 - 1 ex, lifting speed 0.80 / 5.00 m/min, lifting height 4,500 mm, load capacity 1,600 kg Gsdpfsxcx Dqsx Ag Njkc

Condition: new, INA MHA260-0-0-1-1-4-1088-01,0M-7-1 angle measuring system, serial number as per photo, unused in opened original packaging, 100% functional, scope of delivery as per photos Gksdpsi Ea U Djfx Ag Nec

Year of construction: 1985, condition: excellent (used), strip width: 10 - 350 mm strip thickness: 0,2 - 2 mm No. of slits/strip thickness: 25/0,5 mm Gksdpfx Ajlilgceg Njc coil weight: max. 1 t

Condition: used, Year of construction: 2021, Number of spindles 5 St. Working width 230 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. Control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carriage motorized adjustment TECHNICAL DATA in Detail ----- Working width (for tool diameter 125-163 mm): 15-230 mm Working height (for tool diameter 125 mm): 10-160 mm (Tool diameter up to 163 mm): 10-160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Gsdjwgwmhopfx Ag Nekc Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment range axial 20 mm Connecting piece D = 125 mm Aspiration individ...

Condition: used, Hydraulic unit, whisper unit BOSCH REXROTH Hydraulic unit Type UPE 5- /1.50V7/06-10A-H-1-S090+04100891 Factory no. R904100893 / 480933 10 Year of manufacture approx. 2010 Pressure output: 55 bar Delivery rate: 13 L/min. Tank capacity: approx. 20 liters Engine power: 1.5 kW Speed: 1440 rpm. Mains connection: 400 volts, 50 Hz - Unit was used for an operating pressure of approx. 80 bar - 1 hydraulic pump, vane pump BOSCH REXROTH, type PV7-11/06-10RA0MA0-10, pressure max. 100 bar - 1 air-oil cooler, fan cooling by electric motor from the hydraulic pump - Hydraulic block BOSCH REXROTH, type UPES-11/ ABZSS6-C-140E-S30-S13 - 2 hydraulic pressure accumulators Gksdpjv Ev Dqjfx Ag Nec - 1 replaceable filter cartridge - 1 pressure sensor IFM, type TR7 430 - 1 oil sight glass - Hydraulic connections 2x 18L - Sold without oil content Space requirement L x W x H: 700 x 450 x 850 mm Weight: 105 kg very good condition

Condition: used, overall weight: 6,500 kg, empty load weight: 6,500 kg, tire size: 405 / 70 R 18, first registration: 01/2023, emission class: none, suspension: other, Year of construction: 2023, operating hours: 305 h, front tire size: 405 / 70 R 18, Equipment: cabin, Working lights, operating hours 305, closed cabin, Perkins engine, Weidemann 4 in 1 folding bucket 0.9m³ year: 2019, Godjw Dvx Repfx Ag Nskc

Condition: good (used), machine/vehicle number: X02/22, Folding machine MBO T530-1-53/4 F, 4 folding pockets, counter, compressor, second folding unit with 4 pockets, 1 knife, machine number X02/22, in good condition, immediately available. WITHOUT DELIVERY. If interested, we will gladly provide information on additional machines in our inventory. You are welcome to inspect the machine at our premises by prior appointment. Gkodpfx Ajxdhv Eog Noc

Condition: new, Rexroth MAC117B-0-WS-4-C/130-A-1/WI1521LV Permanent Magnet Motor, MNR: R911245926, SN:MAC117-00854, unused with signs of storage, 100% functional, scope of delivery as per photos Gksdpsi D Ngnjfx Ag Nsc

Year of construction: 1985, condition: excellent (used), strip width: 10 - 350 mm strip thickness: 0,2 - 2 mm No. of slits/strip thickness: 25/0,5 mm Gkodpfxjlilfbj Ag Njc coil weight: max. 1 t

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Gksdsvvkipspfx Ag Nsc

Condition: used, functionality: fully functional, power: 35 kW (47.59 HP), fuel type: diesel, empty load weight: 5,900 kg, Year of construction: 2023, operating hours: 1,100 h, total length: 4,000 mm, construction height: 2,550 mm, drive type: Diesel, construction width: 1,970 mm, Mini excavator Gsdpfexmpxyox Ag Nokc Condition: As new Technical condition: Very good Description: KUBOTA KX excavator, year 2023 - 1,100 operating hours - 50 kg operating weight - Powertilt - hydraulic quick coupler - 3 trench buckets (30 cm) - 1 grading bucket (140 cm) - all buckets made entirely from Hardox 400 - bucket cutting edge Hardox 500 - diesel refuelling pump - cab, heating, work lights - air conditioning system - one new rubber track will be installed - one rubber track approx. 20 operating hours - suspended, adjustable pneumatic seat - heating with front window defrost - 4-cylinder Kubota diesel engine with DPF, EU Stage V - Major 1,000-hour service just carried out - simple, robust mini excavator - machine in as-new, excellent condition!! Quick coupler, bucket, 3rd valve, 4th valve, rear work lights, front work lights, heating, full cab, air conditioning, CE certificate,

Condition: new, Year of construction: 2025, Five-axis CNC milling machining center - 3D CNC machining center > The CNC milling system Basis is the optimal entry-level model for milling plastics, composite materials such as CFRP, model-making materials, or aluminum. > High feed rate, compact 5-axis milling head for spatial machining, first-class milling results: The machine is individually adjusted to the material requirements before delivery. This ensures first-class surface quality and excellent milling results for all materials. > With a fixture from HG GRIMME SysTech, the milling quality can additionally be increased considerably. Existing fixtures or tables can be reused at any time. > Modular expansion stages: The CNC machine can be upgraded at any time, even individual requirements can be implemented quickly. With an optional partition wall, for example, unloading and loading can take place on one half of the table while the workpiece is being machined on the second half. The production cycle is accelerated with this technology. > Safety The safety booth already has a generous access area in the basic version and can be optionally upgraded with a soundproofing package. All drives and guides are protected and above the milling area. We have about 365 possibilities to adapt your CNC machining center exactly to your workpiece and material. The basic machine can be extended at any time. > Basic version of the CNC machining center - Cabin with sliding doors, automatic opening, pneumatic - High-performance CNC control NUM Flexium+ with hand terminal (nPad) and 19`` graphic screen - Tool changing system with 13 places, can be loaded from the outside - bellows for dust protection on the Z-axis - cooling unit Cube dimensions component X/Y and Z - 2.500 x 1.000 x 600 mm (plus 162 mm base) Travels X/Y and Z - 3,100 x 1,600 x 910 mm Travels of rotary axes A and C - Rotary axis C 540° - Swivel axis A ± 110 Speeds - Rapid traverse linear axes X/Y 80 m/min - Rapid traverse linear axis Z 30 m/min - Rapid traverse of rotary axes A/C 10,800°/min / 18,000°/min Accuracies - Positioning accuracy ± 0.045 mm - Repeat accuracy ± 0.040 mm Milling spindle - High-frequency milling spindle 9 kW continuous operation (S6) - High-frequency milling spindle 8 kW continuous operation (S1) - Max. speed 36,000 rpm - Tool holder HSK E 40 Machine weight: - approx. 8,000 kg Already included optional equipment - Vacuum pump and vacuum system 1x 6-unit - knee switch 1x - Ethernet and remote maintenance Gkodpfoxdwn Rex Ag Njc - 3D spline - 3D head data - T-Box connection

Condition: new, Year of construction: 2025, functionality: fully functional, LMH-3000 – Industrial Laser Welding Machine – 3000 W Fiber Laser – 4-in-1 Gkedpfexc Ec Tex Ag Nec Description The LMH-3000 is a state-of-the-art 4-in-1 fiber laser welding machine of the latest generation. It combines welding, cutting, brazing, and surface treatment in a single unit. Building on the proven LMH-1500, the LMH-3000 offers even more power and flexibility with its 3000 W laser source – ideal for thicker materials and demanding applications. Thanks to its energy-efficient fiber laser, stable cooling system, and ergonomic handheld operation, this machine is perfectly suited for continuous 24/7 industrial use. Technical Specifications Model: LMH-3000 (4-in-1) Laser Source: 3000 W (Raycus / MaxPhotonics – depending on configuration) Laser Type: Fiber laser Functions: Welding, cutting, brazing, surface treatment Operating Mode: Continuous operation possible Cooling System: Integrated water cooling Materials: Stainless steel, carbon steel, aluminum, copper, galvanized sheets, and more Energy Efficiency: Up to 80% savings compared to conventional processes Operation: Ergonomic handheld operation with optional wire feeder Advantages 4-in-1 functionality – versatile applications Higher output (3000 W) for maximum welding speed and material thickness CE-compliant in accordance with Machinery Directive 2006/42/EC and relevant EU standards Clean weld seams with minimal reworking Robust design for industrial applications Flexible use in metal construction, manufacturing, and maintenance Special Notes Available immediately from stock in Rheda-Wiedenbrück, Germany. Demonstration/Test: Machines can be tested and demonstrated at our facility at any time – see the quality for yourself. Initial Training: Introduction to operation and application available by appointment. Extras & Accessories Wire feed system Shielding gas solutions Replacement nozzles and wear parts Extras & accessories (optional) Replacement nozzles and wear parts – ideal for workshops, mechanical engineering, metal construction, body shops, or maintenance. 🔒 Certified & Safe: CE certificate including risk assessment in accordance with EU directives. Delivery includes all required documentation. 📍 Manufacturer / Distributor: TEC-POINT GmbH Kupferstraße 10, 33378 Rheda-Wiedenbrück, Germany 🚚 Shipping & Invoice: Via freight forwarding (pallet shipping) within Germany and the EU – shipping costs upon request. 🧾 Invoice with VAT shown will be issued. ✅ Buy now and receive ready-to-use delivery!

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, overall weight: 170 kg, type of cooling: water, input current: 16 A, laser power: 2,000 W, input frequency: 50 Hz, continuous power: 3 kW (4.08 HP), Equipment: documentation/manual, type plate available, LMH-2000 – Industrial Laser Welding Machine – 2000 W Fiber Laser – 4-in-1 Description The LMH-2000 is a state-of-the-art 4-in-1 fiber laser welding machine of the latest generation. It combines welding, cutting, brazing, and surface treatment in a single system. Based on the proven LMH-1500, the LMH-2000 offers even greater power and flexibility with its 2000 W laser source – ideal for thicker materials and demanding applications. Featuring an energy-efficient fiber laser, stable cooling system, and ergonomic hand-guided operation, this machine is perfectly suited for continuous industrial 24/7 operation. Gksdoxc Ebcepfx Ag Nsc Technical Data Model: LMH-2000 (4-in-1) Laser Source: 2000 W (Raycus / MaxPhotonics – depending on configuration) Laser Type: Fiber Laser Functions: Welding, Cutting, Brazing, Surface Treatment Operating Mode: Continuous operation possible Cooling System: Integrated water cooling Materials: Stainless steel, carbon steel, aluminum, copper, galvanized sheets and more Energy Efficiency: Up to 80% savings compared to conventional methods Operation: Ergonomic hand-guided torch, optional wire feeder Advantages 4-in-1 functionality – highly versatile Increased power (2000 W) for maximum welding speed and material thickness CE compliant according to Machinery Directive 2006/42/EC and relevant EU standards Clean weld seams with minimal post-processing required Rugged design for industrial use Flexible applications in metal construction, production, and maintenance Special Notes Immediately available from stock in Rheda-Wiedenbrück (Germany) Demonstration/Test: Machines can be tested and demonstrated at our facility at any time – see the quality for yourself. Initial Training: Instruction on operation and application is available by appointment. Extras & Accessories Wire feeding system Shielding gas solutions Replacement nozzles and wear parts Extras & accessories (optional) Replacement nozzles and wear parts: Ideal for workshops, mechanical engineering, metal fabrication, automotive bodywork, or maintenance. 🔒 Certified & Safe: CE certificate including risk assessment in accordance with EU directives. Delivery includes all required documentation. 📍 Manufacturer / Distributor: TEC-POINT GmbH Kupferstraße 10, 33378 Rheda-Wiedenbrück, Germany 🚚 Shipping & Invoice: By freight carrier (pallet shipping) within Germany & the EU – shipping costs on request. 🧾 Invoice with VAT shown will be issued. ✅ Buy now and have it delivered ready for immediate use!