Used Nakamura Tmc 15 for sale (48)

Year of construction: 2007, condition: ready for operation (used), Equipment: main spindle, counter spindle, upper and lower tool turret or upper and lower machining unit, parts catcher, workpiece conveyor, coolant/filter system, separate coolant or hydraulic tank, bar feeder, handheld control unit. Bar diameter: 65mm, full load current: AC 194/176A, main switch power connection: 200A, connected load: 67.2kVA, control: FANUC Series 18i-TB, weight: 8.5t, operating hours control on: 89,800h, automatic time: 68,024h, feed time: 32,377h, including AME HA 180-4 cyclone filter system with two coolant pumps 2x 5/25bar, the machine was completely overhauled in 2024 and is fully functional. An on site inspection is possible. Gedpfxezcflij Adcebn

Condition: excellent (used), Year of construction: 2018, Sub-spindle, Y-axis, C-axis Gbedpfxevwkirj Adcsn FANUC 31i B-NT-SmartX control Turning diameter max 225 mm Turning length -656 mm Chuck Diameter -210 mm Main-spindle speeds 4'500 rpm Sub-spindle speeds 6'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Robot for workpiece loading Tool presetting device Misc. accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2023, number of axes: 9, This 9-axis NAKAMURA-TOME WY150 was manufactured in 2023, featuring a turn-mill centre with a comprehensive toolholder setup including 6 external, 4 internal, 3 radial rotating, and 12 axial rotating holders, plus a collet chuck and a 3-jaw chuck. Consider the opportunity to buy this NAKAMURA-TOME WY150 turn-mill centre. Contact us for more information. Additional equipment • 6 external toolholders • 4 internal toolholders • 3 radial rotating (driven) toolholders • 12 axial rotating (driven) toolholders • 1 collet chuck • 1 three-jaw chuck Gbjdpfx Asyb Sakedcen

Condition: good (used), operating hours: 37,000 h, functionality: fully functional, Portal machine Nakamura WT-250_MMY, Fanuc control 31i-TA, Year of manufacture 2007, only just under 37,000 production hours, Counter spindle, Nakamura CNC portal GR-210 (up to 2 x 10 kg), max. A-Dm 220 mm, max. L 95 mm, Nakamura 14-position stack magazine, Occasional part rejection for temporary inspection, External air purification, Accessories: 2 SMW units 3-jaw chuck for left/right spindle, Coolant cyclone filter system, including 2 coolants HD pumps including pre-filters, including coolant immersion cooler, Hinged belt chip conveyor, Gjdpfx Aszcdpyodcjbn Oil mist extraction unit, Assortment of fixed and rotating tool holders.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 161 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 580 mm, number of axes: 7, This 7-axis Nakamura Tome WY-250 was manufactured in 2007. It features a twin spindle configuration with Y-axis capabilities on both turrets, allowing for versatile machining. The machine includes a maximum Z-axis travel of 580 mm and Y-axis travel of mm. If you are looking to get high-quality turning capabilities, consider the Nakamura Tome WY-250 horizontal turning machine we have for sale. Contact us for further details. • Travels: • X1: 160.5 mm • X2: 165 mm • Z1/Z2: 580 mm • Y1: mm • Y2: / mm • Included tooling: • 4x external tool holders • 4x tool holders for simultaneous mounting of 2 opposite tools • 6x boring bar holders • Driven toolholders (HEIMATEC): • 4x radial • 4x axial • Collet holders (Bellegrandi): • Main spindle: MSCNT70-A6” for BA & BD collets size 70, complete with related cups • Counter spindle: MSCTNR70-A5” for BA collets size 70, complete with spring ejector Additional equipment • IEMCA Master 880/33/P bar feeder (2003), S/N: 0200347S03 • Application: Automatic bar feeder for CNC lathes • Capacity: • Max bar length: 3300 mm (to be confirmed) • Max bar diameter: up to Ø80 mm (model family reference) • Guide channels: Ø65 mm included; Ø70 mm currently installed and can be supplied with the machine • Features: Automatic loading/feeding, synchronization with lathe cycle, compatible with spindle liner/guide channel systems, heavy-duty frame • Note: Sold together with the Nakamura Tome WY-250; some accessories/guide channels may belong to the lathe setup • Complete set of hand jaws (“Manine”) for parts unloader (parts unloader itself not specified) Machine Condition / Technical Status- IMPORTANT The machine is currently being sold in its present technical condition and the seller will NOT carry out the repairs before sale. Main known issues / condition points: • Lower turret driven tooling function not working correctly • Air/oil lubrication system issues detected • Presence of rust inside the lower turret gearbox • Upper turret gearbox found filled with NBU15 grease although the system should operate with air/oil lubrication • Z1 axis linear guides/slides require replacement • Z2 axis linear guides/slides require replacement • Geometry deviations detected during machine inspection • Various spindle/brake/hydraulic cylinder run-out deviations measured • Several bearings, ball screws, seals, guide rollers, belts, lubrication components and wipers require replacement according to the attached spare parts listInspection highlights: • Machine geometry and spindle parallelism were measured and documented • Run-out values were detected on both spindles and hydraulic chuck systems • Multiple axis lubrication and protection components require maintenance/replacement • Detailed spare parts list availableIncluded documentation: • Technical inspection report • Geometry verification report • Spare parts/replacement list • Photos of damaged/worn componentsThe machine remains a highly equipped Nakamura Tome WY-250 Super Mill platform, but prospective buyers should consider the required repair and maintenance work when evaluating the machine. Technical inspection and spare parts documentation available upon request. Gedpfxey N Spce Adcjbn Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Gbodszacc Tspfx Adcen Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning length: 678 mm, turning diameter: 175 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 330 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 1,040 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 40 m/min, total height: 2,565 mm, total length: 3,799 mm, total width: 2,100 mm, type of input current: three-phase, overall weight: 10,000 kg, spindle nose: A2-6", CNC Lathe Nakamura NTJ-100 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2013 CNC control: FANUC 31i-B-NT-IPS Colour touch screen: 19 ["] Distance between spindles: 910 [mm] Max. cutting diameter: 175 [mm] Max. turning lenght: 678 [mm] Stroke Z1 axis: 1040 [mm] Stroke X1 axis: 330 [mm] Stroke Y1 axis: +/- 40 [mm] Stroke Z2 axis: 678 [mm] Stroke X2 axis: 127.5 [mm] Stroke Y2 axis: +/- 32.5 [mm] B axis swivelling stroke: 182 [°] Rapid traverse rate X axis: 20000 [mm/min] Rapid traverse rate Z axis: 40000 [mm/min] Rapid traverse rate Y axis: 6000 [mm/min] Spindle nose: A2-6" Max. bar diameter: 65 [mm] Max. spindle speed: 4500 [rpm] Increment C-axis: 0.001 [°] Spindle power: 11 [kW] Counter spindle nose: A2-5" Max. bar diameter counter spindle: 42 [mm] Max. counter spindle speed: 5000 [rpm] Counter spindle increment C-axis: 0.001 [°] Counter spindle power: 7.5 [kW] Number of tool stations - Turret 1: 24 Number of tool stations driven - Turret 1: 12 Max. speed driven tools - Turret 1: 6000 [rpm] Number of tool stations - Turret 2: 24 Number of tool stations driven - Turret 2: 12 Max. speed driven tools - Turret 2: 6000 [rpm] Live tools power: 7.1 [kW] Total power required: 77 [kVA] Supply voltage: 400 [V] Machine dimensions: 3799 x 2100 x 2565 [mm] Weight: 10000 [Kg] More information upon request. Gedpjy U Uppofx Adcjbn

Condition: ready for operation (used), Year of construction: 2017, operating hours: 18,955 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 203 mm, travel distance Y-axis: 82 mm, travel distance Z-axis: 585 mm, spindle motor power: 15,000 W, total height: 1,852 mm, total width: 1,935 mm, overall weight: 6,000 kg, bar diameter (max.): 65 mm, controller manufacturer: FANUC, controller model: 0i-TF, product length (max.): 2,716 mm, number of slots in tool magazine: 12, number of axes: 4, This 4-axis NAKAMURA-TOME AS-200L was manufactured in 2017. It features a maximum turning diameter of 320 mm and a turning length of 570 mm. The machine includes a 12-station turret and a main spindle speed of up to 4500 rpm. If you are looking to get high-quality turning capabilities, consider the NAKAMURA-TOME AS-200L horizontal turning machine we have for sale. Contact us for further details. Standard Equipment • Turret: 12-station drum turret • CNC control, 4 axes (including C-axis), Fanuc 0i-TF • Anti-collision protection system (mechanical “Airbag”) • Y-axis • 15″ LCD monitor with USB port • Live tooling – 12 positions Gedpfx Ajytqpnjdcebn • Automatic central lubrication system • Machine working area lighting • Coolant pump – 180 W • Initial coolant filling (Blaser coolant)Options included • Transformer • Luck-Beil II (NT Manual Guide – graphical interface for control) • Increased spindle bore to 71 mm (4500 rpm; A2-6) • Upgraded main spindle motor Fanuc 15 / 11 kW (258 Nm) • High-pressure coolant system with Brinkmann pump • Shut-off valve for high-pressure coolant system • Low coolant level sensor • Part ejector cylinder from sub-spindle (cylinder stroke 100 mm) • Signal tower for machine status (3 colors) • Operator shelf under control panel • Type A parts catcher (Ø71 mm / L150 mm / 3 kg) • Preparation for LNS bar feeder • Air blow through main and sub spindle • Manual tool probe (Renishaw, one arm for both spindles) • Spindle cooling system for main and sub spindle • Preparation for oil mist extraction system Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2000, 1 CNC lathe NAKAMURA-TOME TW20 with twin spindle and twin turret Gbsdpfx Aey Ta Saodcon Year 2000 1 STAUBLI RX130 robot, control center

Condition: excellent (used), Year of construction: 2000, 1 NAKAMURA-TOME TW20 CNC lathe with dual spindle and dual turret Year 2000 1 STAUBLI RX130 robot, control center Gbedpfx Asy Ta R Asdcon

Condition: excellent (used), Year of construction: 1999, 1 Nakamura-Tome WT-250 CNC lathe with dual spindle and dual turret 4 axes Year 1999 CNC: Fanuc Series 18i-T Supplied with 8 tool positions And all tooling and tool holders 1 Iemca MASTER 880/38/P bar feeder Gbodpfx Adsy Ta Iuocon

Condition: excellent (used), Year of construction: 1998, 1 Nakamura-Tome WT-250 CNC lathe with dual spindles and dual turrets 4 axes Year 1998 CNC: Fanuc Series 18i-T Supplied with 5 tool stations Gbodoy Ta Ihopfx Adcon And all tooling and tool holders 1 Iemca MASTER 880/38/P bar feeder

Condition: excellent (used), Year of construction: 2005, 1. 5-axis CNC turning center, NAKAMURA-TOME Super NTJ Year 2005 CNC Fanuc Series 18i-TB Gjdpfey Ta Hqex Adcobn Supplied with 5 tools And all tooling and tool holders 1. LNS HYDROBAR SPRINT bar feeder

Condition: excellent (used), Year of construction: 1997, CN NAKAMURA-TOME Turning Center SC-450 CNC: FANUC SERIES 21-T Year: 1997 Power: 45 kW with chip conveyor 5 tool holders GOUBARD tilting and forklift-compatible chip bin 1 inspection point Gbjdsy S Smtspfx Adcjn

Condition: used, NAKAMURA-TOME NTRX 300 is a machining and turning center from bar, engineered for precision, high accuracy and reliable production. Main capacities: 6 axes (5 simultaneous), Z travel 1125 mm, X 700 mm, Y ±125 mm, B tilt 225°, C 360° resolution 0.001; workpieces up to 1100 mm length and Ø 640 mm; tool magazine 40 stations, tool Ø max 90 mm, tool length 300 mm. Technical specs: spindle nose Capto C6, main spindle up to 4500 rpm, milling spindle up to 8000 rpm, spindle motor 15/11 kW, rapid traverse 36 m/min, air 5–7 bar, 3x400 V 50 Hz, total power 65.1 kVA, weight ~18000 kg, footprint 4530×2670×2615 mm. Accessories: coolant system, paper filtration, toolholder set, milling cutters, drills, lamp, oil‑mist extractor, bar loader. Achieves tight tolerances; suited for automotive, aerospace, medical, watchmaking and machine‑tool sectors. Gbodpfx Adjy S A Rpjcjn

Condition: good (used), functionality: fully functional, !!!ON-SITE SALE, D-74219 MÖCKMÜHL!!! 2-axis CNC turning machine NAKAMURA SUPERTURN ST-2 with automatic tailstock Control: Fanuc Godpfx Adey Ucidjcobn Machine is fully functional. Videos available.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 24,140 h, overall weight: 10,000 kg, controller manufacturer: FANUC, controller model: 31i-NT-SmartX, number of axes: 9, This 9-axis Nakamura NTJ100 turn-mill centre was manufactured in 2017, featuring a bar capacity up to 65 mm and dual spindles with maximum speeds of 4500 and 5000 rpm respectively. It includes a Samsys bar loader, Absolent extraction system, and a variety of automated features such as coolant supply through the spindle, parts catcher, and automatic tool setting devices. Consider the opportunity to buy this Nakamura NTJ100 turn-mill centre. Contact us for more information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: han-bei measuring probe for automatic workpiece measurement (infrared or radio type) for left and right spindle • Left + right, with auto swing-in type and 2x 4 measuring directions for quick and precise tool setting via the nc function. • Operating time 43399h • Coolant system: coolant through spindle (CTS); coolant float switch for machine stop on low level; additional coolant flushing via the spindle (left and right) • Bar capacity: Ø 51 mm • Parts catcher type A with collecting tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic lining • Chuck blow-out device for left spindle • Automatic power shut-off • Preparation for oil mist extraction system with connection nozzle Ø 150 mm • Robot/automation prep: pneumatic flap for robot handling on top of the door, opening approx. 400 x 400 mm • Handwheel for manual tracking of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Triple signal lightSamsys bar loader with a 1.5 m bar loading capacity has the following dimensions: Length: 225 cm + 43 cm intermediate guide Width: 120 cm (including loading ramp and control panel) Height: 145 cm or 180 cm with the flap openThe machine was mainly used to process aluminium (95%). Additional equipment Gjdpfxjx D Iuzj Adcebn • Samsys bar loader, including extension • Absolent extraction system • Slat-belt chip conveyor with interface, time-interval control, and alarm evaluation

Condition: excellent (used), Year of construction: 2008, Nakamura Super Mill WY-250 CNC Lathe Capacity: Max. turning diameter: 215 mm Standard turning diameter: 150 mm Distance between centers: max. 870 mm / min. 250 mm Max. turning length: 580 mm Gbodjy Ipp Rjpfx Adcon Bar capacity left/right: L: 65 mm R: 51 mm Chuck size: left: 210 mm (8″) right: 165 mm (6″) Axis travel: Slide travel (X1 / X2): 160.5 mm / 160 mm Slide travel (Z1 / Z2): 580 / 580 mm Slide travel (Y1 / Y2): ±50 mm / -50 mm, +20 mm Slide travel (B2 axis): 620 mm Rapid traverse X1 / X2: 18 m/min Rapid traverse Z1 / Z2: 36 m/min Rapid traverse B2 axis: 36 m/min Rapid traverse Y1 / Y2: 10 m/min Main and sub spindle: Spindle speed: 4500 rpm / 5000 rpm Speed range: stepless / stepless Spindle nose: A2-6 / A2-5 Spindle bore: 80 mm / 63 mm Front bearing inner diameter: 110 mm / 90 mm Drawtube diameter: 66 mm / 52 mm C-axes: Minimum input unit: 0.001° Minimum command increment: 0.001° Max. indexing speed: 600 rpm Feed speed: 1–4800 mm/min C-axis lock: disc brake C-axis positioning time: 1.5 s Upper/lower turret: Turret type: 12-position drum turret Number of tool stations: 48 (2 x 24) Square tool size: 25 mm Round shank tool size: 32 mm Driven tools: Drive system: single drive Spindle speed: 6000 rpm / 3600 rpm Speed range: stepless Number of driven tool stations: 12 × 2 Collet size: ER32 Straight toolholder size: 2 mm – 20 mm Cross toolholder size: 2 mm – 20 mm Drive power and torque: Left spindle: 18.5 / 11 kW 225 / 185 Nm Right spindle: 15 / 11 kW 120 / 120 Nm Tool spindles: 7.5 / 3.7 kW 40 / 16 Nm General: Machine height: 2395 mm (without extraction) Footprint: 4436 mm × 2674 mm / 4905 mm × 3331 mm Machine weight: 14,000 kg Scope of supply as shown in photo gallery includes, among others: Nakamura lathe, toolholders (driven and non-driven), collets, complete operating documentation, portal loader and loading robot, Iemca Master 880 Verso bar feeder, peripheral devices (chip conveyor, transformer, oil mist separator, etc.) No guarantee is given for the correctness, completeness or currentness of the information provided.

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 - Number of turrets : 2 MAIN SPINDLE - Spindle nose : A2-5" - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 51 [mm] - Max. turning diameter : 195 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle nose : A2-5" - Spindle power : 7.5 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 42 [mm] - C axis indexing precision : 0.001 [°] TRAVELS - Z stroke : 400 [mm] - X stroke : 150 [mm] - Rapid traverse rate : 36 [m/min] - Spindle / counter-spindle distance : 600 [mm] TURRET 1 - Number of positions : 24 - Number of motorized positions : 12 - X/Z stroke : 400/150 [mm] - Y stroke : +/- 40 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 7.1 [kW] TURRET 2 - Number of positions : 9 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 3072X1974 [mm] - Machine height : 1799 [mm] - Machine weight : 6500 [kg] EQUIPMENT - CNC : Fanuc 0i-TF PLUS - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming Gbsdpfx Aew Efgaedcsn - 3 colors status lamp - Coolant tank * Coolant through spindle - Chips conveyor : DROITE LNS MH500 - Tool probe - Parts catcher - Parts conveying strip - Predisposition for barfeeder - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 4500 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 200 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 51 [mm] - Max. turning diameter : 200 [mm] - C axis indexing precision : 0,001 [°] - Travel : 780 [mm] - Spindle / counter-spindle distance : 980 [mm] TURNING-MILLING SPINDLE - X/Z stroke : 570/1297 [mm] - Y stroke : +/- 100 [mm] - B Axis stroke : 190 (+/-95) [°] - Tool type : Capto C4 - Spindle speeds : 12000 [rpm] - Spindle power : 7,5 [kW] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur Gbjdpfx Aouhamcedcon - Tool magazine capacity : 48 (2x24) LOWER TURRET - Number of positions : 24 - X/Z stroke : 130,5/658 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 7,1 [kW] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 2700x3460 [mm] - Machine height : 2857 [mm] - Machine weight : 14500 [kg] MACHINE HOURS - Number of working hours : 11000 [h] EQUIPMENT - CNC : Fanuc 31iA-5 - Coolant tank * with high-pressure pump : 25 [bars] * Coolant through spindle - Chips conveyor : Droite - Spindle cooling unit - Predisposition for barfeeder - Electric transformer - Chuck 3 jaws : SCHUNK 215 / SCHUNK 165

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 11/15 [kW] - Torque : 51/110 [Nm] - Spindle speeds : 4500 [rpm] - Max. bar diameter : 66 [mm] - Max. turning diameter : 340 [mm] - Max. diameter on bench : 400 [mm] - Max. chuck diameter : 190 [mm] - C axis indexing precision : 0.001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 227.5 [mm] - Y stroke : +/- 41 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 3.7/5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 21 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2000 X 1600 [mm] - Machine height : 1850 [mm] - Machine weight : 4300 [kg] Gbedovzt Hbjpfx Adcjn EQUIPMENT - CNC : Fanuc - Interface : Ethernet / RS232 / USB / PCMCIA - Coolant tank - Chips conveyor - Oil mist extractor : DONALDSON - Tool probe - Parts catcher - Parts conveying strip - Fire extinguisher * : SIEMENS * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Number of turning tool holders : 2 - Number of fixed tool holders : 4 - Collet chuck : EROWA

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 11/15 [kW] - Torque : 218/258 [Nm] - Spindle speeds : 4500 [rpm] - Max. bar diameter : 66 [mm] - Max. turning diameter : 340 [mm] - Max. diameter on bench : 400 [mm] - Max. chuck diameter : 190 [mm] - C axis indexing precision : 0.001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 227.5 [mm] - Y stroke : +/- 41 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 3.7/5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 21 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2000 X 1600 [mm] - Machine height : 1850 [mm] - Machine weight : 4800 [kg] MACHINE HOURS - Number of hours under power : 69240 [h] EQUIPMENT - CNC : Fanuc - Interface : Ethernet / RS232 / USB / PCMCIA - Coolant tank - Chips conveyor - Oil mist extractor : DONALDSON - Tool probe - Parts catcher - Fire extinguisher * : SIEMENS * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Number of turning tool holders : 1 - Number of fixed tool holders : 4 Gbjdpfxeu Uu R Nj Adcsn - Collet chuck : EROWA

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 - Number of turrets : 2 MAIN SPINDLE - Spindle nose : A2-6 - Spindle power : 18,5 [kW] - Spindle speeds : 59 - 4500 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 250 [mm] Gbjdpouhafxofx Adcjn - Max. chuck diameter : 215 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 59 - 4500 [rpm] - Max. bar diameter : 51 [mm] - Max. turning diameter : 165 [mm] - C axis indexing precision : 0,001 [°] - Travel : 575 [mm] - Spindle / counter-spindle distance : 250 - 870 [mm] TURRET 1 - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 195/600 [mm] - Live tools speed : 80 - 3600 [rpm] - Live tools power : 5.5 [kW] TURRET 2 - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 195/600 [mm] - Live tools speed : 80 - 3600 [rpm] - Live tools power : 5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 63 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3475 x 1933 [mm] - Machine height : 2225 [mm] - Machine weight : 7800 [kg] MACHINE HOURS - Number of hours under power : 58774 [h] - Number of spindle hours : 19265 [h] EQUIPMENT - CNC : 18i-TB - 3 colors status lamp - Coolant tank * with high-pressure pump : 25 [bars] - Chips conveyor - Parts catcher - Parts conveying strip - Number of turning tool holders : 11 - Number of fixed tool holders : 11 - Collet chuck

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 - Number of turrets : 2 MAIN SPINDLE - Spindle nose : A2-6 - Spindle power : 18,5 [kW] - Spindle speeds : 59 - 4500 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 250 [mm] - Max. chuck diameter : 215 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 59 - 4500 [rpm] - Max. bar diameter : 51 [mm] - Max. turning diameter : 165 [mm] - C axis indexing precision : 0,001 [°] - Travel : 575 [mm] - Spindle / counter-spindle distance : 250 - 870 [mm] TURRET 1 - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 195/600 [mm] - Y stroke : +/- 42 [mm] - Live tools speed : 80 - 3600 [rpm] - Live tools power : 5.5 [kW] TURRET 2 - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 195/600 [mm] - Live tools speed : 80 - 3600 [rpm] - Live tools power : 5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 63 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3475 x 1933 [mm] - Machine height : 2225 [mm] - Machine weight : 6000 [kg] MACHINE HOURS - Number of hours under power : 42932 [h] - Number of spindle hours : 12433 [h] EQUIPMENT - CNC : 18i-TB - 3 colors status lamp - Coolant tank * with high-pressure pump : 25 [bars] - Chips conveyor - Parts catcher - Parts conveying strip - Bar loader : LNS QUICK LOAD SERVO 3 Gbsdsuhafrspfx Adcen - Number of turning tool holders : 6 - Number of fixed tool holders : 15 - Collet chuck

Condition: good (used), Year of construction: 2011, functionality: fully functional, number of driven tool stations in tool turret 1: 48, number of driven tool stations in tool turret 2: 12, Available immediately and can be viewed under power. Godpfxjycl Epo Adcsbn Upper X Y Z ballscrews fully refurbished mid 2023 by UK company. Included as shown in pictures -- Live tooling turret NA44A/BMT44 -- Capto C4 milling -- Capto C4 turning holders -- Capto C4 extensions -- 3 x Dual Capto C4 for turret -- Various other turret holders as pictured -- See attached spreadsheet (PDF below), for included holders. -- Renishaw arm -- Part catcher arm + converyor (not used for a long time) -- Old version of CAMplete TurnMill with USB dongle TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 4500 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 200 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 51 [mm] - Max. turning diameter : 200 [mm] - C axis indexing precision : 0,001 [°] - Travel : 780 [mm] - Spindle / counter-spindle distance : 980 [mm] TURNING-MILLING SPINDLE - X/Z stroke : 570/1297 [mm] - Y stroke : +/- 100 [mm] - B Axis stroke : 190 (+/-95) [°] - Tool type : Capto C4 - Spindle speeds : 12000 [rpm] - Spindle power : 7,5 [kW]